diff options
Diffstat (limited to 'include/configs')
| -rw-r--r-- | include/configs/bav335x.h | 475 | ||||
| -rw-r--r-- | include/configs/cm_t35.h | 249 | ||||
| -rw-r--r-- | include/configs/cm_t54.h | 120 | ||||
| -rw-r--r-- | include/configs/duovero.h | 36 | ||||
| -rw-r--r-- | include/configs/mx31pdk.h | 141 | ||||
| -rw-r--r-- | include/configs/omap3_cairo.h | 215 | ||||
| -rw-r--r-- | include/configs/omap3_overo.h | 184 | ||||
| -rw-r--r-- | include/configs/omap3_zoom1.h | 131 | ||||
| -rw-r--r-- | include/configs/pengwyn.h | 166 | ||||
| -rw-r--r-- | include/configs/pepper.h | 78 | ||||
| -rw-r--r-- | include/configs/siemens-am33x-common.h | 3 |
11 files changed, 0 insertions, 1798 deletions
diff --git a/include/configs/bav335x.h b/include/configs/bav335x.h deleted file mode 100644 index c51b850f6d..0000000000 --- a/include/configs/bav335x.h +++ /dev/null @@ -1,475 +0,0 @@ -/* - * bav335x.h - * - * Copyright (c) 2012-2014 Birdland Audio - http://birdland.com/oem - * Copyright (C) 2011 Texas Instruments Incorporated - http://www.ti.com/ - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation version 2. - * - * This program is distributed "as is" WITHOUT ANY WARRANTY of any - * kind, whether express or implied; without even the implied warranty - * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - */ - -#ifndef __CONFIG_BAV335X_H -#define __CONFIG_BAV335X_H - -#include <configs/ti_am335x_common.h> - -#ifndef CONFIG_SPL_BUILD -# define CONFIG_TIMESTAMP -#endif - -#define CONFIG_SYS_BOOTM_LEN (16 << 20) - -#define CONFIG_MACH_TYPE MACH_TYPE_AM335XEVM - -/* Clock Defines */ -#define V_OSCK 24000000 /* Clock output from T2 */ -#define V_SCLK (V_OSCK) - -#ifdef CONFIG_MTD_RAW_NAND -#define NANDARGS \ - "mtdids=" CONFIG_MTDIDS_DEFAULT "\0" \ - "mtdparts=" CONFIG_MTDPARTS_DEFAULT "\0" \ - "nandargs=setenv bootargs console=${console} " \ - "${optargs} " \ - "root=${nandroot} " \ - "rootfstype=${nandrootfstype}\0" \ - "nandroot=ubi0:rootfs rw ubi.mtd=9,2048\0" \ - "nandrootfstype=ubifs rootwait=1\0" \ - "nandboot=echo Booting from nand ...; " \ - "run nandargs; " \ - "nand read ${fdtaddr} u-boot-spl-os; " \ - "nand read ${loadaddr} kernel; " \ - "bootz ${loadaddr} - ${fdtaddr}\0" -#else -#define NANDARGS "" -#endif - -#ifndef CONFIG_SPL_BUILD -#define CONFIG_EXTRA_ENV_SETTINGS \ -DEFAULT_LINUX_BOOT_ENV \ -"boot_fdt=try\0" \ -"bootpart=0:2\0" \ -"bootdir=\0" \ -"fdtdir=/dtbs\0" \ -"bootfile=zImage\0" \ -"fdtfile=undefined\0" \ -"console=ttyO0,115200n8\0" \ -"loadaddr=0x82000000\0" \ -"fdtaddr=0x88000000\0" \ -"rdaddr=0x88080000\0" \ -"initrd_high=0xffffffff\0" \ -"fdt_high=0xffffffff\0" \ -"partitions=" \ - "uuid_disk=${uuid_gpt_disk};" \ - "name=rootfs,start=2MiB,size=-,uuid=${uuid_gpt_rootfs}\0" \ -"optargs=\0" \ -"cmdline=\0" \ -"mmcdev=0\0" \ -"mmcpart=1\0" \ -"mmcroot=/dev/mmcblk0p2 ro\0" \ -"mmcrootfstype=ext4 rootwait fixrtc\0" \ -"rootpath=/export/rootfs\0" \ -"nfsopts=nolock\0" \ -"static_ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}:${hostname}::off\0" \ -"ramroot=/dev/ram0 rw\0" \ -"ramrootfstype=ext2\0" \ -"mmcargs=setenv bootargs console=${console} ${optargs} " \ - "root=${mmcroot} rootfstype=${mmcrootfstype} ${cmdline}\0" \ -"server_ip=192.168.1.100\0" \ -"gw_ip=192.168.1.1\0" \ -"netmask=255.255.255.0\0" \ -"hostname=\0" \ -"device=eth0\0" \ -"autoconf=off\0" \ -"root_dir=/home/userid/targetNFS\0" \ -"nfs_options=,vers=3\0" \ -"nfsrootfstype=ext4 rootwait fixrtc\0" \ -"nfsargs=setenv bootargs console=${console} ${optargs} " \ - "root=/dev/nfs rw rootfstype=${nfsrootfstype} " \ - "nfsroot=${nfsroot} ip=${ip} ${cmdline}\0" \ -"netargs=setenv bootargs console=${console} " \ - "${optargs} root=/dev/nfs " \ - "nfsroot=${serverip}:${rootpath},${nfsopts} rw ip=dhcp\0" \ -"bootenv=uEnv.txt\0" \ -"script=boot.scr\0" \ -"scriptfile=${script}\0" \ -"loadbootscript=load mmc ${bootpart} ${loadaddr} ${scriptfile};\0" \ -"bootscript=echo Running bootscript from mmc${bootpart} ...; " \ - "source ${loadaddr}\0" \ - "loadbootenv=load mmc ${bootpart} ${loadaddr} ${bootenv}\0" \ -"importbootenv=echo Importing environment from mmc ...; " \ - "env import -t -r $loadaddr $filesize\0" \ -"ramargs=setenv bootargs console=${console} " \ - "${optargs} root=${ramroot} rootfstype=${ramrootfstype}\0" \ -"loadramdisk=load mmc ${mmcdev} ${rdaddr} ramdisk.gz\0" \ -"loadimage=load mmc ${bootpart} ${loadaddr} ${bootdir}/${bootfile}\0" \ - "loadrd=load mmc ${bootpart} ${rdaddr} " \ - "${bootdir}/${rdfile}; setenv rdsize ${filesize}\0" \ -"loadfdt=echo loading ${fdtdir}/${fdtfile} ...; " \ - "load mmc ${bootpart} ${fdtaddr} ${fdtdir}/${fdtfile}\0" \ -"mmcboot=mmc dev ${mmcdev}; " \ - "if mmc rescan; then " \ - "gpio set 54;" \ - "setenv bootpart ${mmcdev}:1; " \ - "if test -e mmc ${bootpart} /etc/fstab; then " \ - "setenv mmcpart 1;" \ - "fi; " \ - "echo Checking for: /uEnv.txt ...;" \ - "if test -e mmc ${bootpart} /uEnv.txt; then " \ - "if run loadbootenv; then " \ - "gpio set 55;" \ - "echo Loaded environment from ${bootenv};" \ - "run importbootenv;" \ - "fi;" \ - "echo Checking if uenvcmd is set ...;" \ - "if test -n ${uenvcmd}; then " \ - "gpio set 56; " \ - "echo Running uenvcmd ...;" \ - "run uenvcmd;" \ - "fi;" \ - "echo Checking if client_ip is set ...;" \ - "if test -n ${client_ip}; then " \ - "if test -n ${dtb}; then " \ - "setenv fdtfile ${dtb};" \ - "echo using ${fdtfile} ...;" \ - "fi;" \ - "gpio set 56; " \ - "if test -n ${uname_r}; then " \ - "echo Running nfsboot_uname_r ...;" \ - "run nfsboot_uname_r;" \ - "fi;" \ - "echo Running nfsboot ...;" \ - "run nfsboot;" \ - "fi;" \ - "fi; " \ - "echo Checking for: /${script} ...;" \ - "if test -e mmc ${bootpart} /${script}; then " \ - "gpio set 55;" \ - "setenv scriptfile ${script};" \ - "run loadbootscript;" \ - "echo Loaded script from ${scriptfile};" \ - "gpio set 56; " \ - "run bootscript;" \ - "fi; " \ - "echo Checking for: /boot/${script} ...;" \ - "if test -e mmc ${bootpart} /boot/${script}; then " \ - "gpio set 55;" \ - "setenv scriptfile /boot/${script};" \ - "run loadbootscript;" \ - "echo Loaded script from ${scriptfile};" \ - "gpio set 56; " \ - "run bootscript;" \ - "fi; " \ - "echo Checking for: /boot/uEnv.txt ...;" \ - "for i in 1 2 3 4 5 6 7 ; do " \ - "setenv mmcpart ${i};" \ - "setenv bootpart ${mmcdev}:${mmcpart};" \ - "if test -e mmc ${bootpart} /boot/uEnv.txt; then " \ - "gpio set 55;" \ - "load mmc ${bootpart} ${loadaddr} " \ - "/boot/uEnv.txt;" \ - "env import -t ${loadaddr} ${filesize};" \ - "echo Loaded environment from /boot/uEnv.txt;" \ - "if test -n ${dtb}; then " \ - "setenv fdtfile ${dtb};" \ - "echo Using: dtb=${fdtfile} ...;" \ - "fi;" \ - "echo Checking if uname_r is set in " \ - "/boot/uEnv.txt...;" \ - "if test -n ${uname_r}; then " \ - "gpio set 56; " \ - "echo Running uname_boot ...;" \ - "setenv mmcroot /dev/mmcblk${mmcdev}" \ - "p${mmcpart} ro;" \ - "run uname_boot;" \ - "fi;" \ - "fi;" \ - "done;" \ - "fi;\0" \ -"netboot=echo Booting from network ...; " \ - "setenv autoload no; " \ - "dhcp; " \ - "tftp ${loadaddr} ${bootfile}; " \ - "tftp ${fdtaddr} ${fdtfile}; " \ - "run netargs; " \ - "bootz ${loadaddr} - ${fdtaddr}\0" \ -"nfsboot=echo Booting from ${server_ip} ...; " \ - "setenv nfsroot ${server_ip}:${root_dir}${nfs_options}; " \ - "setenv ip ${client_ip}:${server_ip}:${gw_ip}:${netmask}:${hostname}" \ - ":${device}:${autoconf}; " \ - "setenv autoload no; " \ - "setenv serverip ${server_ip}; " \ - "setenv ipaddr ${client_ip}; " \ - "tftp ${loadaddr} ${bootfile}; " \ - "tftp ${fdtaddr} dtbs/${fdtfile}; " \ - "run nfsargs; " \ - "bootz ${loadaddr} - ${fdtaddr}\0" \ -"nfsboot_uname_r=echo Booting from ${server_ip} ...; " \ - "setenv nfsroot ${server_ip}:${root_dir}${nfs_options}; " \ - "setenv ip ${client_ip}:${server_ip}:${gw_ip}:${netmask}:${hostname}" \ - ":${device}:${autoconf}; " \ - "setenv autoload no; " \ - "setenv serverip ${server_ip}; " \ - "setenv ipaddr ${client_ip}; " \ - "tftp ${loadaddr} vmlinuz-${uname_r}; " \ - "tftp ${fdtaddr} dtbs/${uname_r}/${fdtfile}; " \ - "run nfsargs; " \ - "bootz ${loadaddr} - ${fdtaddr}\0" \ -"ramboot=echo Booting from ramdisk ...; " \ - "run ramargs; " \ - "bootz ${loadaddr} ${rdaddr} ${fdtaddr}\0" \ -"findfdt="\ - "if test $board_rev = B; then " \ - "setenv fdtfile birdland_bav335b.dtb; " \ - "setenv fdtbase am335x-boneblack; fi; " \ - "if test $board_rev = A; then " \ - "setenv fdtfile birdland_bav335a.dtb; " \ - "setenv fdtbase am335x-boneblack; fi; " \ - "if test $fdtfile = undefined; then " \ - "echo WARNING: Could not determine device tree to use; fi; \0" \ -"uname_boot="\ - "setenv bootdir /boot; " \ - "setenv bootfile vmlinuz-${uname_r}; " \ - "if test -e mmc ${bootpart} ${bootdir}/${bootfile}; then " \ - "echo loading ${bootdir}/${bootfile} ...; "\ - "run loadimage;" \ - "setenv fdtdir /boot/dtbs/${uname_r}; " \ - "if test -e mmc ${bootpart} ${fdtdir}/${fdtfile}; then " \ - "run loadfdt;" \ - "else " \ - "setenv fdtdir /lib/firmware/${uname_r}/device-tree; " \ - "if test -e mmc ${bootpart} ${fdtdir}/" \ - "${fdtfile}; then " \ - "run loadfdt;" \ - "else " \ - "setenv fdtdir /boot/dtb-${uname_r}; " \ - "if test -e mmc ${bootpart} ${fdtdir}" \ - "/${fdtfile}; then " \ - "run loadfdt;" \ - "else " \ - "setenv fdtdir /boot/dtbs; " \ - "if test -e mmc ${bootpart} ${fdtdir}" \ - "/${fdtfile}; then " \ - "run loadfdt;" \ - "else " \ - "echo; echo unable to find " \ - "[${fdtfile}] " \ - "did you name it correctly?" \ - "echo booting fallback " \ - "[/boot/dtbs/" \ - "${uname_r}" \ - "/${fdtbase}.dtb]...;" \ - "setenv fdtdir /boot/dtbs/" \ - "${uname_r}; " \ - "setenv fdtfile " \ - "${fdtbase}.dtb; " \ - "run loadfdt;" \ - "fi;" \ - "fi;" \ - "fi;" \ - "fi;" \ - "fi; " \ - "setenv rdfile initrd.img-${uname_r}; " \ - "if test -e mmc ${bootpart} ${bootdir}/${rdfile}; then " \ - "echo loading ${bootdir}/${rdfile} ...; "\ - "run loadrd;" \ - "if test -n ${uuid}; then " \ - "setenv mmcroot UUID=${uuid} ro;" \ - "fi;" \ - "run mmcargs;" \ - "echo debug: [${bootargs}] ... ;" \ - "echo debug: [bootz ${loadaddr} ${rdaddr}:${rdsize} " \ - "${fdtaddr}] ... ;" \ - "bootz ${loadaddr} ${rdaddr}:${rdsize} ${fdtaddr}; " \ - "else " \ - "run mmcargs;" \ - "echo debug: [${bootargs}] ... ;" \ - "echo debug: [bootz ${loadaddr} - ${fdtaddr}] ... ;" \ - "bootz ${loadaddr} - ${fdtaddr}; " \ - "fi;" \ -"fi;\0" \ - NANDARGS \ - DFUARGS -#endif - -#define CONFIG_BOOTCOMMAND \ - "gpio set 53; " \ - "i2c mw 0x24 1 0x3e; " \ - "run findfdt; " \ - "setenv mmcdev 0; " \ - "setenv bootpart 0:1; " \ - "run mmcboot;" \ - "gpio clear 56; " \ - "gpio clear 55; " \ - "gpio clear 54; " \ - "setenv mmcdev 1; " \ - "setenv bootpart 1:1; " \ - "run mmcboot;" - -/* NS16550 Configuration */ -#define CONFIG_SYS_NS16550_COM1 0x44e09000 /* UART0 */ -#define CONFIG_SYS_NS16550_COM2 0x48022000 /* UART1 */ -#define CONFIG_SYS_NS16550_COM3 0x48024000 /* UART2 */ -#define CONFIG_SYS_NS16550_COM4 0x481a6000 /* UART3 */ -#define CONFIG_SYS_NS16550_COM5 0x481a8000 /* UART4 */ -#define CONFIG_SYS_NS16550_COM6 0x481aa000 /* UART5 */ - -#define CONFIG_ENV_EEPROM_IS_ON_I2C -#define CONFIG_SYS_I2C_EEPROM_ADDR 0x50 /* Main EEPROM */ -#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 2 - -/* PMIC support */ -#define CONFIG_POWER_TPS65217 -#define CONFIG_POWER_TPS65910 - -/* SPL */ -#ifndef CONFIG_NOR_BOOT -/* Bootcount using the RTC block */ -#define CONFIG_SYS_BOOTCOUNT_BE - -/* USB gadget RNDIS */ -#endif - -#ifdef CONFIG_MTD_RAW_NAND -/* NAND: device related configs */ -#define CONFIG_SYS_NAND_5_ADDR_CYCLE -#define CONFIG_SYS_NAND_PAGE_COUNT (CONFIG_SYS_NAND_BLOCK_SIZE / \ - CONFIG_SYS_NAND_PAGE_SIZE) -#define CONFIG_SYS_NAND_PAGE_SIZE 2048 -#define CONFIG_SYS_NAND_OOBSIZE 64 -#define CONFIG_SYS_NAND_BLOCK_SIZE (128*1024) -/* NAND: driver related configs */ -#define CONFIG_SYS_NAND_BAD_BLOCK_POS NAND_LARGE_BADBLOCK_POS -#define CONFIG_SYS_NAND_ECCPOS { \ - 2, 3, 4, 5, 6, 7, 8, 9, \ - 10, 11, 12, 13, 14, 15, 16, 17, \ - 18, 19, 20, 21, 22, 23, 24, 25, \ - 26, 27, 28, 29, 30, 31, 32, 33, \ - 34, 35, 36, 37, 38, 39, 40, 41, \ - 42, 43, 44, 45, 46, 47, 48, 49, \ - 50, 51, 52, 53, 54, 55, 56, 57, } - -#define CONFIG_SYS_NAND_ECCSIZE 512 -#define CONFIG_SYS_NAND_ECCBYTES 14 -#define CONFIG_SYS_NAND_ONFI_DETECTION -#define CONFIG_NAND_OMAP_ECCSCHEME OMAP_ECC_BCH8_CODE_HW -#define CONFIG_SYS_NAND_U_BOOT_OFFS 0x000c0000 -#define CONFIG_SYS_ENV_SECT_SIZE CONFIG_SYS_NAND_BLOCK_SIZE -/* NAND: SPL related configs */ -#ifdef CONFIG_SPL_OS_BOOT -#define CONFIG_SYS_NAND_SPL_KERNEL_OFFS 0x00200000 /* kernel offset */ -#endif -#endif /* !CONFIG_MTD_RAW_NAND */ - -/* - * For NOR boot, we must set this to the start of where NOR is mapped - * in memory. - */ - -/* - * USB configuration. We enable MUSB support, both for host and for - * gadget. We set USB0 as peripheral and USB1 as host, based on the - * board schematic and physical port wired to each. Then for host we - * add mass storage support and for gadget we add both RNDIS ethernet - * and DFU. - */ -#define CONFIG_AM335X_USB0 -#define CONFIG_AM335X_USB0_MODE MUSB_PERIPHERAL -#define CONFIG_AM335X_USB1 -#define CONFIG_AM335X_USB1_MODE MUSB_HOST - -#if defined(CONFIG_SPL_BUILD) && defined(CONFIG_SPL_USB_ETHER) -/* disable host part of MUSB in SPL */ -/* disable EFI partitions and partition UUID support */ -#endif - -/* USB Device Firmware Update support */ -#ifndef CONFIG_SPL_BUILD -#define DFU_ALT_INFO_MMC \ - "dfu_alt_info_mmc=" \ - "boot part 0 1;" \ - "rootfs part 0 2;" \ - "MLO fat 0 1;" \ - "MLO.raw raw 0x100 0x100;" \ - "u-boot.img.raw raw 0x300 0x400;" \ - "spl-os-args.raw raw 0x80 0x80;" \ - "spl-os-image.raw raw 0x900 0x2000;" \ - "spl-os-args fat 0 1;" \ - "spl-os-image fat 0 1;" \ - "u-boot.img fat 0 1;" \ - "uEnv.txt fat 0 1\0" -#ifdef CONFIG_MTD_RAW_NAND -#define DFU_ALT_INFO_NAND \ - "dfu_alt_info_nand=" \ - "SPL part 0 1;" \ - "SPL.backup1 part 0 2;" \ - "SPL.backup2 part 0 3;" \ - "SPL.backup3 part 0 4;" \ - "u-boot part 0 5;" \ - "u-boot-spl-os part 0 6;" \ - "kernel part 0 8;" \ - "rootfs part 0 9\0" -#else -#define DFU_ALT_INFO_NAND "" -#endif -#define DFU_ALT_INFO_RAM \ - "dfu_alt_info_ram=" \ - "kernel ram 0x80200000 0xD80000;" \ - "fdt ram 0x80F80000 0x80000;" \ - "ramdisk ram 0x81000000 0x4000000\0" -#define DFUARGS \ - "dfu_alt_info_emmc=rawemmc raw 0 3751936\0" \ - DFU_ALT_INFO_MMC \ - DFU_ALT_INFO_RAM \ - DFU_ALT_INFO_NAND -#endif - -/* - * Default to using SPI for environment, etc. - * 0x000000 - 0x020000 : SPL (128KiB) - * 0x020000 - 0x0A0000 : U-Boot (512KiB) - * 0x0A0000 - 0x0BFFFF : First copy of U-Boot Environment (128KiB) - * 0x0C0000 - 0x0DFFFF : Second copy of U-Boot Environment (128KiB) - * 0x0E0000 - 0x442000 : Linux Kernel - * 0x442000 - 0x800000 : Userland - */ -#if defined(CONFIG_SPI_BOOT) -/* SPL related */ -#elif defined(CONFIG_EMMC_BOOT) -#define CONFIG_SYS_MMC_ENV_DEV 1 -#define CONFIG_SYS_MMC_ENV_PART 2 -#endif - -/* SPI flash. */ - -/* Network. */ - -/* - * NOR Size = 16 MiB - * Number of Sectors/Blocks = 128 - * Sector Size = 128 KiB - * Word length = 16 bits - * Default layout: - * 0x000000 - 0x07FFFF : U-Boot (512 KiB) - * 0x080000 - 0x09FFFF : First copy of U-Boot Environment (128 KiB) - * 0x0A0000 - 0x0BFFFF : Second copy of U-Boot Environment (128 KiB) - * 0x0C0000 - 0x4BFFFF : Linux Kernel (4 MiB) - * 0x4C0000 - 0xFFFFFF : Userland (11 MiB + 256 KiB) - */ -#if defined(CONFIG_NOR) -#define CONFIG_SYS_MAX_FLASH_SECT 128 -#define CONFIG_SYS_MAX_FLASH_BANKS 1 -#define CONFIG_SYS_FLASH_BASE (0x08000000) -#define CONFIG_SYS_FLASH_CFI_WIDTH FLASH_CFI_16BIT -#define CONFIG_SYS_FLASH_SIZE 0x01000000 -#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_FLASH_BASE -/* Reduce SPL size by removing unlikey targets */ -#endif /* NOR support */ - -#endif /* ! __CONFIG_AM335X_EVM_H */ diff --git a/include/configs/cm_t35.h b/include/configs/cm_t35.h deleted file mode 100644 index fffea0da18..0000000000 --- a/include/configs/cm_t35.h +++ /dev/null @@ -1,249 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0+ */ -/* - * (C) Copyright 2011 CompuLab, Ltd. - * Mike Rapoport <mike@compulab.co.il> - * Igor Grinberg <grinberg@compulab.co.il> - * - * Based on omap3_beagle.h - * (C) Copyright 2006-2008 - * Texas Instruments. - * Richard Woodruff <r-woodruff2@ti.com> - * Syed Mohammed Khasim <x0khasim@ti.com> - * - * Configuration settings for the CompuLab CM-T35 and CM-T3730 boards - */ - -#ifndef __CONFIG_H -#define __CONFIG_H - -#define CONFIG_SYS_CACHELINE_SIZE 64 - -/* - * High Level Configuration Options - */ -#define CONFIG_CM_T3X /* working with CM-T35 and CM-T3730 */ - -#include <asm/arch/cpu.h> /* get chip and board defs */ -#include <asm/arch/omap.h> - -/* Clock Defines */ -#define V_OSCK 26000000 /* Clock output from T2 */ -#define V_SCLK (V_OSCK >> 1) - -#define CONFIG_CMDLINE_TAG /* enable passing of ATAGs */ -#define CONFIG_SETUP_MEMORY_TAGS -#define CONFIG_INITRD_TAG -#define CONFIG_REVISION_TAG -#define CONFIG_SERIAL_TAG - -/* - * Size of malloc() pool - */ - /* Sector */ -#define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + (128 << 10)) - -/* - * Hardware drivers - */ - -/* - * NS16550 Configuration - */ -#define V_NS16550_CLK 48000000 /* 48MHz (APLL96/2) */ - -#define CONFIG_SYS_NS16550_SERIAL -#define CONFIG_SYS_NS16550_REG_SIZE (-4) -#define CONFIG_SYS_NS16550_CLK V_NS16550_CLK - -/* - * select serial console configuration - */ -#define CONFIG_SYS_NS16550_COM3 OMAP34XX_UART3 - -/* allow to overwrite serial and ethaddr */ -#define CONFIG_ENV_OVERWRITE -#define CONFIG_SYS_BAUDRATE_TABLE {4800, 9600, 19200, 38400, 57600,\ - 115200} - -/* USB device configuration */ -#define CONFIG_USB_DEVICE -#define CONFIG_USB_TTY - -/* commands to include */ - -#define CONFIG_SYS_I2C -#define CONFIG_SYS_I2C_EEPROM_ADDR 0x50 -#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 1 -#define CONFIG_SYS_I2C_EEPROM_BUS 0 -#define CONFIG_I2C_MULTI_BUS - -/* - * TWL4030 - */ - -/* - * Board NAND Info. - */ -#define CONFIG_SYS_NAND_BASE NAND_BASE /* physical address */ - /* to access nand at */ - /* CS0 */ -#define CONFIG_SYS_MAX_NAND_DEVICE 1 /* Max number of NAND */ - /* devices */ - -/* Environment information */ -#define CONFIG_EXTRA_ENV_SETTINGS \ - "loadaddr=0x82000000\0" \ - "usbtty=cdc_acm\0" \ - "console=ttyO2,115200n8\0" \ - "mpurate=500\0" \ - "vram=12M\0" \ - "dvimode=1024x768MR-16@60\0" \ - "defaultdisplay=dvi\0" \ - "mmcdev=0\0" \ - "mmcroot=/dev/mmcblk0p2 rw\0" \ - "mmcrootfstype=ext4 rootwait\0" \ - "nandroot=/dev/mtdblock4 rw\0" \ - "nandrootfstype=ubifs\0" \ - "mmcargs=setenv bootargs console=${console} " \ - "mpurate=${mpurate} " \ - "vram=${vram} " \ - "omapfb.mode=dvi:${dvimode} " \ - "omapdss.def_disp=${defaultdisplay} " \ - "root=${mmcroot} " \ - "rootfstype=${mmcrootfstype}\0" \ - "nandargs=setenv bootargs console=${console} " \ - "mpurate=${mpurate} " \ - "vram=${vram} " \ - "omapfb.mode=dvi:${dvimode} " \ - "omapdss.def_disp=${defaultdisplay} " \ - "root=${nandroot} " \ - "rootfstype=${nandrootfstype}\0" \ - "loadbootscript=fatload mmc ${mmcdev} ${loadaddr} boot.scr\0" \ - "bootscript=echo Running bootscript from mmc ...; " \ - "source ${loadaddr}\0" \ - "loaduimage=fatload mmc ${mmcdev} ${loadaddr} uImage\0" \ - "mmcboot=echo Booting from mmc ...; " \ - "run mmcargs; " \ - "bootm ${loadaddr}\0" \ - "nandboot=echo Booting from nand ...; " \ - "run nandargs; " \ - "nand read ${loadaddr} 2a0000 400000; " \ - "bootm ${loadaddr}\0" \ - -#define CONFIG_BOOTCOMMAND \ - "mmc dev ${mmcdev}; if mmc rescan; then " \ - "if run loadbootscript; then " \ - "run bootscript; " \ - "else " \ - "if run loaduimage; then " \ - "run mmcboot; " \ - "else run nandboot; " \ - "fi; " \ - "fi; " \ - "else run nandboot; fi" - -/* - * Miscellaneous configurable options - */ -#define CONFIG_TIMESTAMP -#define CONFIG_SYS_AUTOLOAD "no" - - /* works on */ - -#define CONFIG_SYS_LOAD_ADDR (OMAP34XX_SDRC_CS0) /* default */ - /* load address */ - -/* - * OMAP3 has 12 GP timers, they can be driven by the system clock - * (12/13/16.8/19.2/38.4MHz) or by 32KHz clock. We use 13MHz (V_SCLK). - * This rate is divided by a local divisor. - */ -#define CONFIG_SYS_TIMERBASE (OMAP34XX_GPT2) -#define CONFIG_SYS_PTV 2 /* Divisor: 2^(PTV+1) => 8 */ - -/*----------------------------------------------------------------------- - * Physical Memory Map - */ -#define PHYS_SDRAM_1 OMAP34XX_SDRC_CS0 - -/*----------------------------------------------------------------------- - * FLASH and environment organization - */ - -/* **** PISMO SUPPORT *** */ -/* Monitor at start of flash */ -#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_FLASH_BASE -#define CONFIG_SYS_MONITOR_LEN (256 << 10) /* Reserve 2 sectors */ - -/* additions for new relocation code, must be added to all boards */ -#define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM_1 -#define CONFIG_SYS_INIT_RAM_ADDR 0x4020f800 -#define CONFIG_SYS_INIT_RAM_SIZE 0x800 -#define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_INIT_RAM_ADDR + \ - CONFIG_SYS_INIT_RAM_SIZE - \ - GENERATED_GBL_DATA_SIZE) - -/* Status LED */ -#define GREEN_LED_GPIO 186 /* CM-T35 Green LED is GPIO186 */ - -#define CONFIG_SPLASHIMAGE_GUARD - -/* Display Configuration */ -#define LCD_BPP LCD_COLOR16 - -#define CONFIG_SPLASH_SCREEN -#define CONFIG_SPLASH_SOURCE -#define CONFIG_BMP_16BPP -#define CONFIG_SCF0403_LCD - -/* Defines for SPL */ - -#define CONFIG_SYS_MMCSD_FS_BOOT_PARTITION 1 -#define CONFIG_SPL_FS_LOAD_PAYLOAD_NAME "u-boot.img" - -#define CONFIG_SPL_NAND_BASE -#define CONFIG_SPL_NAND_DRIVERS -#define CONFIG_SPL_NAND_ECC - -/* NAND boot config */ -#define CONFIG_SYS_NAND_5_ADDR_CYCLE -#define CONFIG_SYS_NAND_PAGE_COUNT 64 -#define CONFIG_SYS_NAND_PAGE_SIZE 2048 -#define CONFIG_SYS_NAND_OOBSIZE 64 -#define CONFIG_SYS_NAND_BLOCK_SIZE (128 * 1024) -#define CONFIG_SYS_NAND_BAD_BLOCK_POS NAND_LARGE_BADBLOCK_POS -/* - * Use the ECC/OOB layout from omap_gpmc.h that matches your chip: - * SP vs LP, 8bit vs 16bit: GPMC_NAND_HW_ECC_LAYOUT - */ -#define CONFIG_SYS_NAND_ECCPOS { 1, 2, 3, 4, 5, 6, 7, 8, 9, \ - 10, 11, 12 } -#define CONFIG_SYS_NAND_ECCSIZE 512 -#define CONFIG_SYS_NAND_ECCBYTES 3 -#define CONFIG_NAND_OMAP_ECCSCHEME OMAP_ECC_HAM1_CODE_HW - -#define CONFIG_SYS_NAND_U_BOOT_START CONFIG_SYS_TEXT_BASE -#define CONFIG_SYS_NAND_U_BOOT_OFFS 0x80000 - -#define CONFIG_SPL_MAX_SIZE (SRAM_SCRATCH_SPACE_ADDR - \ - CONFIG_SPL_TEXT_BASE) - -/* - * Use 0x80008000 as TEXT_BASE here for compatibility reasons with the - * older x-loader implementations. And move the BSS area so that it - * doesn't overlap with TEXT_BASE. - */ -#define CONFIG_SPL_BSS_START_ADDR 0x80100000 -#define CONFIG_SPL_BSS_MAX_SIZE 0x80000 /* 512 KB */ - -#define CONFIG_SYS_SPL_MALLOC_START 0x80208000 -#define CONFIG_SYS_SPL_MALLOC_SIZE 0x100000 - -/* EEPROM */ -#define CONFIG_ENV_EEPROM_IS_ON_I2C -#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 1 -#define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS 4 -#define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS 5 -#define CONFIG_SYS_EEPROM_SIZE 256 - -#endif /* __CONFIG_H */ diff --git a/include/configs/cm_t54.h b/include/configs/cm_t54.h deleted file mode 100644 index 50308fb28f..0000000000 --- a/include/configs/cm_t54.h +++ /dev/null @@ -1,120 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0+ */ -/* - * Config file for Compulab CM-T54 board - * - * Copyright (C) 2014, Compulab Ltd - http://compulab.co.il/ - * - * Author: Dmitry Lifshitz <lifshitz@compulab.co.il> - */ - -#ifndef __CONFIG_CM_T54_H -#define __CONFIG_CM_T54_H - -#define CONFIG_CM_T54 -#define CONFIG_DRAM_2G - -#define PARTS_DEFAULT - -#include <configs/ti_omap5_common.h> - -/* EEPROM related defines */ -#define CONFIG_SYS_I2C_EEPROM_ADDR 0x50 -#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 1 -#define CONFIG_SYS_I2C_EEPROM_BUS 0 - -/* Enable SD/MMC CD and WP GPIOs */ -#define OMAP_HSMMC_USE_GPIO - -/* UART setup */ -#define CONFIG_SYS_NS16550_COM4 UART4_BASE - -/* MMC ENV related defines */ - -#define CONFIG_SYS_MMC_ENV_DEV 1 /* SLOT2: eMMC(1) */ -#define CONFIG_SYS_MMC_ENV_PART 0 - -/* Enhance our eMMC support / experience. */ -#define CONFIG_HSMMC2_8BIT - -/* SATA Boot related defines */ -#define CONFIG_SPL_SATA_BOOT_DEVICE 0 -#define CONFIG_SYS_SATA_FAT_BOOT_PARTITION 1 - -#define CONFIG_SCSI_AHCI_PLAT -#define CONFIG_SYS_SCSI_MAX_SCSI_ID 1 -#define CONFIG_SYS_SCSI_MAX_LUN 1 -#define CONFIG_SYS_SCSI_MAX_DEVICE (CONFIG_SYS_SCSI_MAX_SCSI_ID * \ - CONFIG_SYS_SCSI_MAX_LUN) -/* USB UHH support options */ -#define CONFIG_EHCI_HCD_INIT_AFTER_RESET - -#define CONFIG_OMAP_EHCI_PHY2_RESET_GPIO 76 /* HSIC2 HUB #RESET */ -#define CONFIG_OMAP_EHCI_PHY3_RESET_GPIO 83 /* HSIC3 ETH #RESET */ - -/* Enabled commands */ - -/* EEPROM */ -#define CONFIG_ENV_EEPROM_IS_ON_I2C -#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 1 -#define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS 4 -#define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS 5 -#define CONFIG_SYS_EEPROM_SIZE 256 - -/* USB Networking options */ - -/* - * Miscellaneous configurable options - */ -#undef CONFIG_SYS_AUTOLOAD -#undef CONFIG_EXTRA_ENV_SETTINGS -#undef CONFIG_BOOTCOMMAND - -#define CONFIG_SYS_AUTOLOAD "no" - -#define CONFIG_EXTRA_ENV_SETTINGS \ - DEFAULT_LINUX_BOOT_ENV \ - "baudrate=115200\0" \ - "bootdelay=3\0" \ - "autoload=no\0" \ - "bootscr=bootscr.img\0" \ - "fdtfile=omap5-sbc-t54.dtb\0" \ - "kernel=zImage-cm-t54\0" \ - "ramdisk=ramdisk-cm-t54.img\0" \ - "console=ttyO3\0" \ - "ramdisksize=16384\0" \ - "mmcdev=0\0" \ - "mmcroot=/dev/mmcblk1p2\0" \ - "mmcargs=setenv bootargs console=${console} " \ - "root=${mmcroot} rw rootwait\0" \ - "ramroot=/dev/ram0\0" \ - "ramargs=setenv bootargs console=${console} " \ - "root=${ramroot} ramdisk_size=${ramdisksize} rw\0" \ - "mmcloadkernel=load mmc ${mmcdev} ${loadaddr} ${kernel}\0" \ - "mmcloadfdt=load mmc ${mmcdev} ${fdtaddr} ${fdtfile}\0" \ - "mmcloadramdisk=load mmc ${mmcdev} ${rdaddr} ${ramdisk}\0" \ - "mmcloadbootscript=load mmc ${mmcdev} ${loadaddr} ${bootsrc}\0" \ - "mmcbootscript=echo Running bootscript from mmc${mmcdev}...; " \ - "source ${loadaddr}\0" \ - "mmcbootlinux=echo Booting from mmc${mmcdev} ...; " \ - "bootz ${loadaddr} ${rdaddr} ${fdtaddr}\0" \ - "mmcboot=if mmc dev ${mmcdev} && mmc rescan; then " \ - "if run mmcloadbootscript; " \ - "then run mmcbootscript; " \ - "fi; " \ - "if run mmcloadkernel; then " \ - "if run mmcloadfdt; then " \ - "if run mmcloadramdisk; then " \ - "run ramargs; " \ - "run mmcbootlinux; " \ - "fi; " \ - "run mmcargs; " \ - "setenv rdaddr - ; " \ - "run mmcbootlinux; " \ - "fi; " \ - "fi; " \ - "fi;\0" - -#define CONFIG_BOOTCOMMAND \ - "bootcmd=run mmcboot || setenv mmcdev 1; setenv mmcroot /dev/mmcblk0p2; run mmcboot;" - -#endif /* __CONFIG_CM_T54_H */ diff --git a/include/configs/duovero.h b/include/configs/duovero.h deleted file mode 100644 index dccb369991..0000000000 --- a/include/configs/duovero.h +++ /dev/null @@ -1,36 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0+ */ -/* - * (C) Copyright: 2013 - * Gumstix, Inc - http://www.gumstix.com - * Maintainer: Ash Charles <ash@gumstix.com> - * - * Configuration settings for the Gumstix DuoVero board. - * See omap4_common.h for OMAP4 common part - */ - -#ifndef __CONFIG_DUOVERO_H -#define __CONFIG_DUOVERO_H - -/* - * High Level Configuration Options - */ -#define CONFIG_DUOVERO -#define CONFIG_MACH_TYPE MACH_TYPE_DUOVERO - -#include <configs/ti_omap4_common.h> - -#undef CONFIG_SYS_EMIF_PRECALCULATED_TIMING_REGS -#define CONFIG_SYS_AUTOMATIC_SDRAM_DETECTION -#define CONFIG_SYS_DEFAULT_LPDDR2_TIMINGS - -/* USB UHH support options */ -#define CONFIG_OMAP_EHCI_PHY1_RESET_GPIO 1 -#define CONFIG_OMAP_EHCI_PHY2_RESET_GPIO 62 - -#define CONFIG_SYS_ENABLE_PADS_ALL - -/* GPIO */ - -/* ENV related config options */ - -#endif /* __CONFIG_DUOVERO_H */ diff --git a/include/configs/mx31pdk.h b/include/configs/mx31pdk.h deleted file mode 100644 index f910d6199b..0000000000 --- a/include/configs/mx31pdk.h +++ /dev/null @@ -1,141 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0+ */ -/* - * (C) Copyright 2008 Magnus Lilja <lilja.magnus@gmail.com> - * - * (C) Copyright 2004 - * Texas Instruments. - * Richard Woodruff <r-woodruff2@ti.com> - * Kshitij Gupta <kshitij@ti.com> - * - * Configuration settings for the Freescale i.MX31 PDK board. - */ - -#ifndef __CONFIG_H -#define __CONFIG_H - -#include <asm/arch/imx-regs.h> - -/* High Level Configuration Options */ -#define CONFIG_CMDLINE_TAG /* enable passing of ATAGs */ -#define CONFIG_SETUP_MEMORY_TAGS -#define CONFIG_INITRD_TAG - -#define CONFIG_MACH_TYPE MACH_TYPE_MX31_3DS - -#define CONFIG_SPL_TARGET "u-boot-with-spl.bin" -#define CONFIG_SPL_MAX_SIZE 2048 - -#ifndef CONFIG_SPL_BUILD -#define CONFIG_SKIP_LOWLEVEL_INIT -#endif - -/* - * Size of malloc() pool - */ -#define CONFIG_SYS_MALLOC_LEN (2*CONFIG_ENV_SIZE + 2 * 128 * 1024) - -/* - * Hardware drivers - */ - -#define CONFIG_MXC_UART -#define CONFIG_MXC_UART_BASE UART1_BASE - -/* PMIC Controller */ -#define CONFIG_POWER -#define CONFIG_POWER_SPI -#define CONFIG_POWER_FSL -#define CONFIG_FSL_PMIC_BUS 1 -#define CONFIG_FSL_PMIC_CS 2 -#define CONFIG_FSL_PMIC_CLK 1000000 -#define CONFIG_FSL_PMIC_MODE (SPI_MODE_0 | SPI_CS_HIGH) -#define CONFIG_FSL_PMIC_BITLEN 32 -#define CONFIG_RTC_MC13XXX - -/* allow to overwrite serial and ethaddr */ -#define CONFIG_ENV_OVERWRITE - -#define CONFIG_EXTRA_ENV_SETTINGS \ - "bootargs_base=setenv bootargs console=ttymxc0,115200\0" \ - "bootargs_nfs=setenv bootargs $(bootargs) root=/dev/nfs " \ - "ip=dhcp nfsroot=$(serverip):$(nfsrootfs),v3,tcp\0" \ - "bootcmd=run bootcmd_net\0" \ - "bootcmd_net=run bootargs_base bootargs_mtd bootargs_nfs; " \ - "tftpboot 0x81000000 uImage-mx31; bootm\0" \ - "prg_uboot=tftpboot 0x81000000 u-boot-with-spl.bin; " \ - "nand erase 0x0 0x40000; " \ - "nand write 0x81000000 0x0 0x40000\0" - -/* - * Miscellaneous configurable options - */ - -/* memtest works on */ - -/* default load address */ -#define CONFIG_SYS_LOAD_ADDR 0x81000000 - -/*----------------------------------------------------------------------- - * Physical Memory Map - */ -#define PHYS_SDRAM_1 CSD0_BASE -#define PHYS_SDRAM_1_SIZE (128 * 1024 * 1024) - -#define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM_1 -#define CONFIG_SYS_INIT_RAM_ADDR IRAM_BASE_ADDR -#define CONFIG_SYS_INIT_RAM_SIZE IRAM_SIZE -#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - \ - GENERATED_GBL_DATA_SIZE) -#define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_INIT_RAM_ADDR + \ - CONFIG_SYS_INIT_RAM_SIZE) - -/* - * environment organization - */ - -/* - * NAND driver - */ -#define CONFIG_MXC_NAND_REGS_BASE NFC_BASE_ADDR -#define CONFIG_SYS_MAX_NAND_DEVICE 1 -#define CONFIG_SYS_NAND_BASE NFC_BASE_ADDR -#define CONFIG_MXC_NAND_HWECC -#define CONFIG_SYS_NAND_LARGEPAGE - -/* NAND configuration for the NAND_SPL */ - -/* Start copying real U-Boot from the second page */ -#define CONFIG_SYS_NAND_U_BOOT_OFFS CONFIG_SPL_PAD_TO -#define CONFIG_SYS_NAND_U_BOOT_SIZE 0x3f800 -/* Load U-Boot to this address */ -#define CONFIG_SYS_NAND_U_BOOT_DST CONFIG_SYS_TEXT_BASE -#define CONFIG_SYS_NAND_U_BOOT_START CONFIG_SYS_NAND_U_BOOT_DST - -#define CONFIG_SYS_NAND_PAGE_SIZE 0x800 -#define CONFIG_SYS_NAND_BLOCK_SIZE (128 * 1024) -#define CONFIG_SYS_NAND_PAGE_COUNT 64 -#define CONFIG_SYS_NAND_SIZE (256 * 1024 * 1024) -#define CONFIG_SYS_NAND_BAD_BLOCK_POS 0 - -/* Configuration of lowlevel_init.S (clocks and SDRAM) */ -#define CCM_CCMR_SETUP 0x074B0BF5 -#define CCM_PDR0_SETUP_532MHZ (PDR0_CSI_PODF(0x3f) | PDR0_CSI_PRDF(7) | \ - PDR0_PER_PODF(7) | PDR0_HSP_PODF(3) | \ - PDR0_NFC_PODF(5) | PDR0_IPG_PODF(1) | \ - PDR0_MAX_PODF(3) | PDR0_MCU_PODF(0)) -#define CCM_MPCTL_SETUP_532MHZ (PLL_PD(0) | PLL_MFD(51) | PLL_MFI(10) | \ - PLL_MFN(12)) - -#define ESDMISC_MDDR_SETUP 0x00000004 -#define ESDMISC_MDDR_RESET_DL 0x0000000c -#define ESDCFG0_MDDR_SETUP 0x006ac73a - -#define ESDCTL_ROW_COL (ESDCTL_SDE | ESDCTL_ROW(2) | ESDCTL_COL(2)) -#define ESDCTL_SETTINGS (ESDCTL_ROW_COL | ESDCTL_SREFR(3) | \ - ESDCTL_DSIZ(2) | ESDCTL_BL(1)) -#define ESDCTL_PRECHARGE (ESDCTL_ROW_COL | ESDCTL_CMD_PRECHARGE) -#define ESDCTL_AUTOREFRESH (ESDCTL_ROW_COL | ESDCTL_CMD_AUTOREFRESH) -#define ESDCTL_LOADMODEREG (ESDCTL_ROW_COL | ESDCTL_CMD_LOADMODEREG) -#define ESDCTL_RW ESDCTL_SETTINGS - -#endif /* __CONFIG_H */ diff --git a/include/configs/omap3_cairo.h b/include/configs/omap3_cairo.h deleted file mode 100644 index c76c81ddd5..0000000000 --- a/include/configs/omap3_cairo.h +++ /dev/null @@ -1,215 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0+ */ -/* - * Configuration settings for the QUIPOS Cairo board. - * - * Copyright (C) DENX GmbH - * - * Author : - * Albert ARIBAUD <albert.aribaud@3adev.fr> - * - * Derived from EVM code by - * Manikandan Pillai <mani.pillai@ti.com> - * Itself derived from Beagle Board and 3430 SDP code by - * Richard Woodruff <r-woodruff2@ti.com> - * Syed Mohammed Khasim <khasim@ti.com> - * - * Also derived from include/configs/omap3_beagle.h - */ - -#ifndef __OMAP3_CAIRO_CONFIG_H -#define __OMAP3_CAIRO_CONFIG_H - -/* - * 1MB into the SDRAM to allow for SPL's bss at the beginning of SDRAM - * 64 bytes before this address should be set aside for u-boot.img's - * header. That is 0x800FFFC0--0x80100000 should not be used for any - * other needs. We use this rather than the inherited defines from - * ti_armv7_common.h for backwards compatibility. - */ -#define CONFIG_SPL_BSS_START_ADDR 0x80000000 -#define CONFIG_SPL_BSS_MAX_SIZE (512 << 10) /* 512 KB */ -#define CONFIG_SYS_SPL_MALLOC_START 0x80208000 -#define CONFIG_SYS_SPL_MALLOC_SIZE 0x100000 - -#include <configs/ti_omap3_common.h> - -#define CONFIG_REVISION_TAG 1 -#define CONFIG_ENV_OVERWRITE - -/* Enable Multi Bus support for I2C */ -#define CONFIG_I2C_MULTI_BUS 1 - -/* Probe all devices */ -#define CONFIG_SYS_I2C_NOPROBES { {0x0, 0x0} } - -/* - * TWL4030 - */ - -/* - * Board NAND Info. - */ -#define CONFIG_SYS_MAX_NAND_DEVICE 1 /* Max number of NAND */ - /* devices */ -#define CONFIG_EXTRA_ENV_SETTINGS \ - "machid=ffffffff\0" \ - "fdt_high=0x87000000\0" \ - "baudrate=115200\0" \ - "fec_addr=00:50:C2:7E:90:F0\0" \ - "netmask=255.255.255.0\0" \ - "ipaddr=192.168.2.9\0" \ - "gateway=192.168.2.1\0" \ - "serverip=192.168.2.10\0" \ - "nfshost=192.168.2.10\0" \ - "stdin=serial\0" \ - "stdout=serial\0" \ - "stderr=serial\0" \ - "bootargs_mmc_ramdisk=mem=128M " \ - "console=ttyO1,115200n8 " \ - "root=/dev/ram0 rw " \ - "initrd=0x81600000,16M " \ - "mpurate=600 ramdisk_size=16384 omapfb.rotate=1 " \ - "omapfb.rotate_type=1 omap_vout.vid1_static_vrfb_alloc=y\0" \ - "mmcboot=mmc init; " \ - "fatload mmc 0 0x80000000 uImage; " \ - "fatload mmc 0 0x81600000 ramdisk.gz; " \ - "setenv bootargs ${bootargs_mmc_ramdisk}; " \ - "bootm 0x80000000\0" \ - "bootargs_nfs=mem=99M console=ttyO0,115200n8 noinitrd rw ip=dhcp " \ - "root=/dev/nfs " \ - "nfsroot=192.168.2.10:/home/spiid/workdir/Quipos/rootfs,nolock " \ - "mpurate=600 omapfb.rotate=1 omapfb.rotate_type=1 " \ - "omap_vout.vid1_static_vrfb_alloc=y\0" \ - "boot_nfs=run get_kernel; setenv bootargs ${bootargs_nfs}; " \ - "bootm 0x80000000\0" \ - "bootargs_nand=mem=128M console=ttyO1,115200n8 noinitrd " \ - "root=/dev/mtdblock4 rw rootfstype=jffs2 mpurate=600 " \ - "omap_vout.vid1_static_vrfb_alloc=y omapfb.rotate=1 " \ - "omapfb.rotate_type=1\0" \ - "boot_nand=nand read.i 0x80000000 280000 300000; setenv " \ - "bootargs ${bootargs_nand}; bootm 0x80000000\0" \ - "ledorange=i2c dev 1; i2c mw 60 00 00 1; i2c mw 60 14 FF 1; " \ - "i2c mw 60 15 FF 1; i2c mw 60 16 FF 1; i2c mw 60 17 FF 1; " \ - "i2c mw 60 09 10 1; i2c mw 60 06 10 1\0" \ - "ledgreen=i2c dev 1; i2c mw 60 00 00 1; i2c mw 60 14 FF 1; " \ - "i2c mw 60 15 FF 1; i2c mw 60 16 FF 1; i2c mw 60 17 FF 1; i2c " \ - "mw 60 09 00 1; i2c mw 60 06 10 1\0" \ - "ledoff=i2c dev 1; i2c mw 60 00 00 1; i2c mw 60 14 FF 1; " \ - "i2c mw 60 15 FF 1; i2c mw 60 16 FF 1; i2c mw 60 17 FF 1; " \ - "i2c mw 60 09 00 1; i2c mw 60 06 0 1\0" \ - "ledred=i2c dev 1; i2c mw 60 00 00 1; i2c mw 60 14 FF 1; " \ - "i2c mw 60 15 FF 1; i2c mw 60 16 FF 1; i2c mw 60 17 FF 1; " \ - "i2c mw 60 09 10 1; i2c mw 60 06 0 1\0" \ - "flash_xloader=mw.b 0x81600000 0xff 0x20000; " \ - "nand erase 0 20000; " \ - "fatload mmc 0 0x81600000 MLO; " \ - "nandecc hw; " \ - "nand write.i 0x81600000 0 20000;\0" \ - "flash_uboot=mw.b 0x81600000 0xff 0x40000; " \ - "nand erase 80000 40000; " \ - "fatload mmc 0 0x81600000 u-boot.bin; " \ - "nandecc sw; " \ - "nand write.i 0x81600000 80000 40000;\0" \ - "flash_kernel=mw.b 0x81600000 0xff 0x300000; " \ - "nand erase 280000 300000; " \ - "fatload mmc 0 0x81600000 uImage; " \ - "nandecc sw; " \ - "nand write.i 0x81600000 280000 300000;\0" \ - "flash_rootfs=fatload mmc 0 0x81600000 rootfs.jffs2; " \ - "nandecc sw; " \ - "nand write.jffs2 0x680000 0xFF ${filesize}; " \ - "nand erase 680000 ${filesize}; " \ - "nand write.jffs2 81600000 680000 ${filesize};\0" \ - "flash_scrub=nand scrub; " \ - "run flash_xloader; " \ - "run flash_uboot; " \ - "run flash_kernel; " \ - "run flash_rootfs;\0" \ - "flash_all=run ledred; " \ - "nand erase.chip; " \ - "run ledorange; " \ - "run flash_xloader; " \ - "run flash_uboot; " \ - "run flash_kernel; " \ - "run flash_rootfs; " \ - "run ledgreen; " \ - "run boot_nand; \0" \ - -#define CONFIG_BOOTCOMMAND \ - "if fatload mmc 0 0x81600000 MLO; then run flash_all; " \ - "else run boot_nand; fi" - -/* - * OMAP3 has 12 GP timers, they can be driven by the system clock - * (12/13/16.8/19.2/38.4MHz) or by 32KHz clock. We use 13MHz (V_SCLK). - * This rate is divided by a local divisor. - */ -#define CONFIG_SYS_PTV 2 /* Divisor: 2^(PTV+1) => 8 */ - -/*----------------------------------------------------------------------- - * FLASH and environment organization - */ - -/* **** PISMO SUPPORT *** */ -#if defined(CONFIG_CMD_NAND) -#define CONFIG_SYS_FLASH_BASE NAND_BASE -#endif - -/* Monitor at start of flash */ -#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_FLASH_BASE -#define CONFIG_SYS_ONENAND_BASE ONENAND_MAP - -#define CONFIG_SYS_ENV_SECT_SIZE (128 << 10) /* 128 KiB */ - -/* Defines for SPL */ - -/* NAND boot config */ -#define CONFIG_SYS_NAND_5_ADDR_CYCLE -#define CONFIG_SYS_NAND_PAGE_COUNT 64 -#define CONFIG_SYS_NAND_PAGE_SIZE 2048 -#define CONFIG_SYS_NAND_OOBSIZE 64 -#define CONFIG_SYS_NAND_BLOCK_SIZE (128*1024) -#define CONFIG_SYS_NAND_BAD_BLOCK_POS 0 -#define CONFIG_SYS_NAND_ECCPOS {2, 3, 4, 5, 6, 7, 8, 9,\ - 10, 11, 12, 13} -#define CONFIG_SYS_NAND_ECCSIZE 512 -#define CONFIG_SYS_NAND_ECCBYTES 3 -#define CONFIG_NAND_OMAP_ECCSCHEME OMAP_ECC_HAM1_CODE_HW -#define CONFIG_SYS_NAND_U_BOOT_OFFS 0x80000 -/* NAND: SPL falcon mode configs */ -#ifdef CONFIG_SPL_OS_BOOT -#define CONFIG_SYS_NAND_SPL_KERNEL_OFFS 0x280000 -#endif - -/* env defaults */ -#define CONFIG_BOOTFILE "uImage" - -/* Provide the MACH_TYPE value the vendor kernel requires */ -#define CONFIG_MACH_TYPE 3063 - -/*----------------------------------------------------------------------- - * FLASH and environment organization - */ - -/* **** PISMO SUPPORT *** */ - -#define CONFIG_SYS_MAX_FLASH_SECT 520 /* max number of sectors */ - /* on one chip */ -#define CONFIG_SYS_MAX_FLASH_BANKS 2 /* max number of flash banks */ - -/*----------------------------------------------------------------------- - * CFI FLASH driver setup - */ -/* timeout values are in ticks */ -#define CONFIG_SYS_FLASH_ERASE_TOUT (100 * CONFIG_SYS_HZ) -#define CONFIG_SYS_FLASH_WRITE_TOUT (100 * CONFIG_SYS_HZ) - -/* Flash banks JFFS2 should use */ -#define CONFIG_SYS_MAX_MTD_BANKS (CONFIG_SYS_MAX_FLASH_BANKS + \ - CONFIG_SYS_MAX_NAND_DEVICE) -#define CONFIG_SYS_JFFS2_MEM_NAND -/* use flash_info[2] */ -#define CONFIG_SYS_JFFS2_FIRST_BANK CONFIG_SYS_MAX_FLASH_BANKS -#define CONFIG_SYS_JFFS2_NUM_BANKS 1 - -#endif /* __OMAP3_CAIRO_CONFIG_H */ diff --git a/include/configs/omap3_overo.h b/include/configs/omap3_overo.h deleted file mode 100644 index 9a5b9f297c..0000000000 --- a/include/configs/omap3_overo.h +++ /dev/null @@ -1,184 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0+ */ -/* - * Configuration settings for the Gumstix Overo board. - */ - -#ifndef __CONFIG_H -#define __CONFIG_H - -#include <configs/ti_omap3_common.h> -/* - * We are only ever GP parts and will utilize all of the "downloaded image" - * area in SRAM which starts at 0x40200000 and ends at 0x4020FFFF (64KB). - */ - -/* call misc_init_r */ - -/* pass the revision tag */ -#define CONFIG_REVISION_TAG - -/* override size of malloc() pool */ -#undef CONFIG_SYS_MALLOC_LEN -/* Shift 128 << 15 provides 4 MiB heap to support UBI commands. - * Shift 128 << 10 provides 128 KiB heap for limited-memory devices. */ -#define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + (128 << 15)) - -/* I2C Support */ - -/* TWL4030 LED */ - -/* USB EHCI */ -#define CONFIG_OMAP_EHCI_PHY1_RESET_GPIO 183 - -/* commands to include */ - -#ifdef CONFIG_MTD_RAW_NAND -/* NAND block size is 128 KiB. Synchronize these values with - * overo_nand_partitions in mach-omap2/board-overo.c in Linux: - * xloader 4 * NAND_BLOCK_SIZE = 512 KiB - * uboot 14 * NAND_BLOCK_SIZE = 1792 KiB - * uboot environtment 2 * NAND_BLOCK_SIZE = 256 KiB - * linux 64 * NAND_BLOCK_SIZE = 8 MiB - * rootfs remainder - */ -#endif /* CONFIG_MTD_RAW_NAND */ - -/* Board NAND Info. */ -/* Environment information */ -#define CONFIG_EXTRA_ENV_SETTINGS \ - DEFAULT_LINUX_BOOT_ENV \ - "bootdir=/boot\0" \ - "bootfile=zImage\0" \ - "usbtty=cdc_acm\0" \ - "console=ttyO2,115200n8\0" \ - "mpurate=auto\0" \ - "optargs=\0" \ - "vram=12M\0" \ - "dvimode=1024x768MR-16@60\0" \ - "defaultdisplay=dvi\0" \ - "mmcdev=0\0" \ - "mmcroot=/dev/mmcblk0p2 rw\0" \ - "mmcrootfstype=ext4 rootwait\0" \ - "nandroot=ubi0:rootfs ubi.mtd=4\0" \ - "nandrootfstype=ubifs\0" \ - "mtdparts=" CONFIG_MTDPARTS_DEFAULT "\0" \ - "mmcargs=setenv bootargs console=${console} " \ - "${optargs} " \ - "mpurate=${mpurate} " \ - "vram=${vram} " \ - "omapfb.mode=dvi:${dvimode} " \ - "omapdss.def_disp=${defaultdisplay} " \ - "root=${mmcroot} " \ - "rootfstype=${mmcrootfstype}\0" \ - "nandargs=setenv bootargs console=${console} " \ - "${optargs} " \ - "mpurate=${mpurate} " \ - "vram=${vram} " \ - "omapfb.mode=dvi:${dvimode} " \ - "omapdss.def_disp=${defaultdisplay} " \ - "root=${nandroot} " \ - "rootfstype=${nandrootfstype}\0" \ - "loadbootscript=load mmc ${mmcdev} ${loadaddr} boot.scr\0" \ - "bootscript=echo Running boot script from mmc ...; " \ - "source ${loadaddr}\0" \ - "loadbootenv=load mmc ${mmcdev} ${loadaddr} uEnv.txt\0" \ - "importbootenv=echo Importing environment from mmc ...; " \ - "env import -t ${loadaddr} ${filesize}\0" \ - "loaduimage=load mmc ${mmcdev} ${loadaddr} uImage\0" \ - "mmcboot=echo Booting from mmc...; " \ - "run mmcargs; " \ - "bootm ${loadaddr}\0" \ - "loadzimage=load mmc ${mmcdev}:2 ${loadaddr} ${bootdir}/${bootfile}\0" \ - "loadfdt=load mmc ${mmcdev}:2 ${fdtaddr} ${bootdir}/${fdtfile}\0" \ - "loadubizimage=ubifsload ${loadaddr} ${bootdir}/${bootfile}\0" \ - "loadubifdt=ubifsload ${fdtaddr} ${bootdir}/${fdtfile}\0" \ - "mmcbootfdt=echo Booting with DT from mmc ...; " \ - "run mmcargs; " \ - "bootz ${loadaddr} - ${fdtaddr}\0" \ - "nandboot=echo Booting from nand ...; " \ - "run nandargs; " \ - "if nand read ${loadaddr} linux; then " \ - "bootm ${loadaddr};" \ - "fi;\0" \ - "nanddtsboot=echo Booting from nand with DTS...; " \ - "run nandargs; " \ - "ubi part rootfs; "\ - "ubifsmount ubi0:rootfs; "\ - "run loadubifdt; "\ - "run loadubizimage; "\ - "bootz ${loadaddr} - ${fdtaddr}\0" \ - -#define CONFIG_BOOTCOMMAND \ - "mmc dev ${mmcdev}; if mmc rescan; then " \ - "if run loadbootscript; then " \ - "run bootscript; " \ - "fi;" \ - "if run loadbootenv; then " \ - "echo Loaded environment from ${bootenv};" \ - "run importbootenv;" \ - "fi;" \ - "if test -n $uenvcmd; then " \ - "echo Running uenvcmd ...;" \ - "run uenvcmd;" \ - "fi;" \ - "if run loaduimage; then " \ - "run mmcboot;" \ - "fi;" \ - "if run loadzimage; then " \ - "if test -z \"${fdtfile}\"; then " \ - "setenv fdtfile omap3-${boardname}-${expansionname}.dtb;" \ - "fi;" \ - "if run loadfdt; then " \ - "run mmcbootfdt;" \ - "fi;" \ - "fi;" \ - "fi;" \ - "run nandboot; " \ - "if test -z \"${fdtfile}\"; then "\ - "setenv fdtfile omap3-${boardname}-${expansionname}.dtb;" \ - "fi;" \ - "run nanddtsboot; " \ - -/* memtest works on */ - -/* FLASH and environment organization */ -#if defined(CONFIG_MTD_RAW_NAND) -#define CONFIG_SYS_FLASH_BASE NAND_BASE -#endif - -/* Monitor at start of flash */ -#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_FLASH_BASE -#define CONFIG_SYS_ONENAND_BASE ONENAND_MAP - -#define ONENAND_ENV_OFFSET 0x240000 /* environment starts here */ -#define CONFIG_SYS_ENV_SECT_SIZE (128 << 10) /* 128 KiB */ - -/* Initial RAM setup */ -#define CONFIG_SYS_INIT_RAM_ADDR 0x4020f800 -#define CONFIG_SYS_INIT_RAM_SIZE 0x800 - -/* NAND boot config */ -#define CONFIG_SYS_NAND_MAX_ECCPOS 56 -#define CONFIG_SYS_NAND_5_ADDR_CYCLE -#define CONFIG_SYS_NAND_PAGE_COUNT 64 -#define CONFIG_SYS_NAND_PAGE_SIZE 2048 -#define CONFIG_SYS_NAND_OOBSIZE 64 -#define CONFIG_SYS_NAND_BLOCK_SIZE (128*1024) -#define CONFIG_SYS_NAND_BAD_BLOCK_POS NAND_LARGE_BADBLOCK_POS -#define CONFIG_SYS_NAND_ECCPOS {2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, \ - 13, 14, 16, 17, 18, 19, 20, 21, 22, \ - 23, 24, 25, 26, 27, 28, 30, 31, 32, \ - 33, 34, 35, 36, 37, 38, 39, 40, 41, \ - 42, 44, 45, 46, 47, 48, 49, 50, 51, \ - 52, 53, 54, 55, 56} -#define CONFIG_SYS_NAND_ECCSIZE 512 -#define CONFIG_SYS_NAND_ECCBYTES 13 -#define CONFIG_NAND_OMAP_ECCSCHEME OMAP_ECC_BCH8_CODE_HW_DETECTION_SW -#define CONFIG_SYS_NAND_U_BOOT_START CONFIG_SYS_TEXT_BASE -#define CONFIG_SYS_NAND_U_BOOT_OFFS 0x80000 -/* NAND: SPL falcon mode configs */ -#ifdef CONFIG_SPL_OS_BOOT -#define CONFIG_SYS_NAND_SPL_KERNEL_OFFS 0x280000 -#endif - -#endif /* __CONFIG_H */ diff --git a/include/configs/omap3_zoom1.h b/include/configs/omap3_zoom1.h deleted file mode 100644 index 24884b26fb..0000000000 --- a/include/configs/omap3_zoom1.h +++ /dev/null @@ -1,131 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0+ */ -/* - * (C) Copyright 2006-2008 - * Texas Instruments. - * Richard Woodruff <r-woodruff2@ti.com> - * Syed Mohammed Khasim <x0khasim@ti.com> - * Nishanth Menon <nm@ti.com> - * - * Configuration settings for the TI OMAP3430 Zoom MDK board. - */ - -#ifndef __CONFIG_H -#define __CONFIG_H - -#include <asm/arch/cpu.h> /* get chip and board defs */ -#include <asm/arch/omap.h> -#include <configs/ti_omap3_common.h> - -/* Remove SPL boot option - we do not support that on LDP yet */ - -/* Generic NAND definition conflicts with debug_base */ -#undef CONFIG_SYS_NAND_BASE - -#define CONFIG_REVISION_TAG 1 - -/* - * Hardware drivers - */ - -/* USB device configuration */ -#define CONFIG_USB_DEVICE 1 -#define CONFIG_USB_TTY 1 -/* Change these to suit your needs */ -#define CONFIG_USBD_VENDORID 0x0451 -#define CONFIG_USBD_PRODUCTID 0x5678 -#define CONFIG_USBD_MANUFACTURER "Texas Instruments" -#define CONFIG_USBD_PRODUCT_NAME "Zoom1" - -#if defined(CONFIG_CMD_NAND) -/* NAND: SPL falcon mode configs */ -#ifdef CONFIG_SPL_OS_BOOT -#define CONFIG_SYS_NAND_SPL_KERNEL_OFFS 0x280000 -#endif -#endif - -/* - * TWL4030 - */ - -/* - * Board NAND Info. - */ -#define CONFIG_SYS_NAND_BASE NAND_BASE /* physical address */ - /* to access nand at */ - /* CS0 */ - -/* Environment information */ - -#define CONFIG_EXTRA_ENV_SETTINGS \ - "loadaddr=0x82000000\0" \ - "fdtaddr=0x80f80000\0" \ - "bootfile=uImage\0" \ - "fdtfile=omap3-ldp.dtb\0" \ - "bootdir=/\0" \ - "bootpart=0:1\0" \ - "usbtty=cdc_acm\0" \ - "console=ttyO2,115200n8\0" \ - "mmcdev=0\0" \ - "videomode=1024x768@60,vxres=1024,vyres=768\0" \ - "videospec=omapfb:vram:2M,vram:4M\0" \ - "mmcargs=setenv bootargs console=${console} " \ - "video=${videospec},mode:${videomode} " \ - "root=/dev/mmcblk0p2 rw " \ - "rootfstype=ext3 rootwait\0" \ - "nandargs=setenv bootargs console=${console} " \ - "video=${videospec},mode:${videomode} " \ - "root=/dev/mtdblock4 rw " \ - "rootfstype=jffs2\0" \ - "loadbootscript=fatload mmc ${mmcdev} ${loadaddr} boot.scr\0" \ - "bootscript=echo Running bootscript from mmc ...; " \ - "source ${loadaddr}\0" \ - "loadimage=load mmc ${bootpart} ${loadaddr} ${bootdir}/${bootfile}\0" \ - "loadfdt=load mmc ${bootpart} ${fdtaddr} ${bootdir}/${fdtfile}\0" \ - "loadzimage=setenv bootfile zImage; if run loadimage; then run loadfdt;fi\0"\ - "mmcboot=echo Booting from mmc ...; " \ - "run mmcargs; " \ - "bootm ${loadaddr}\0" \ - "mmczboot=echo Booting from mmc ...; " \ - "run mmcargs; " \ - "bootz ${loadaddr} - ${fdtaddr}\0" \ - "nandboot=echo Booting from nand ...; " \ - "run nandargs; " \ - "nand read ${loadaddr} 280000 400000; " \ - "bootm ${loadaddr}\0" \ - -#define CONFIG_BOOTCOMMAND \ - "mmc dev ${mmcdev}; if mmc rescan; then " \ - "if run loadbootscript; then " \ - "run bootscript; " \ - "else " \ - "if run loadimage; then " \ - "run mmcboot; " \ - "else if run loadzimage; then " \ - "run mmczboot; " \ - "else run nandboot; " \ - "fi; fi;" \ - "fi; " \ - "else run nandboot; fi" - -/* - * Miscellaneous configurable options - */ - -/*----------------------------------------------------------------------- - * FLASH and environment organization - */ - -/* **** PISMO SUPPORT *** */ -#if defined(CONFIG_CMD_NAND) -#define CONFIG_SYS_FLASH_BASE NAND_BASE -#endif - -/* Monitor at start of flash */ -#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_FLASH_BASE -#define CONFIG_SYS_ONENAND_BASE ONENAND_MAP - -#define ONENAND_ENV_OFFSET 0x260000 /* environment starts here */ - -#define CONFIG_SYS_ENV_SECT_SIZE (128 << 10) /* 128 KiB */ - -#endif /* __CONFIG_H */ diff --git a/include/configs/pengwyn.h b/include/configs/pengwyn.h deleted file mode 100644 index 17d1981b4e..0000000000 --- a/include/configs/pengwyn.h +++ /dev/null @@ -1,166 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0+ */ -/* - * pengwyn.h - * - * Copyright (C) 2013 Lothar Felten <lothar.felten@gmail.com> - * - * based on am335x_evm.h, Copyright (C) 2011 Texas Instruments Inc. - */ - -#ifndef __CONFIG_PENGWYN_H -#define __CONFIG_PENGWYN_H - - -#include <configs/ti_am335x_common.h> - -/* Clock Defines */ -#define V_OSCK 24000000 -#define V_SCLK V_OSCK - -/* set env size */ - -#ifndef CONFIG_SPL_BUILD -#define CONFIG_EXTRA_ENV_SETTINGS \ - "loadaddr=0x80200000\0" \ - "fdtaddr=0x80F80000\0" \ - "bootpart=0:2\0" \ - "bootdir=/boot\0" \ - "bootfile=zImage\0" \ - "fdtfile=am335x-pengwyn.dtb\0" \ - "console=ttyO0,115200n8\0" \ - "optargs=\0" \ - "mmcdev=0\0" \ - "mmcroot=/dev/mmcblk0p2 ro\0" \ - "mmcrootfstype=ext4 rootwait\0" \ - "rootpath=/export/rootfs\0" \ - "nfsopts=nolock\0" \ - "static_ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}:${hostname}" \ - "::off\0" \ - "mmcargs=setenv bootargs console=${console} " \ - "${optargs} " \ - "root=${mmcroot} " \ - "rootfstype=${mmcrootfstype}\0" \ - "netargs=setenv bootargs console=${console} " \ - "${optargs} " \ - "root=/dev/nfs " \ - "nfsroot=${serverip}:${rootpath},${nfsopts} rw " \ - "ip=dhcp\0" \ - "bootenv=uEnv.txt\0" \ - "loadbootenv=load mmc ${mmcdev} ${loadaddr} ${bootenv}\0" \ - "importbootenv=echo Importing environment from mmc ...; " \ - "env import -t $loadaddr $filesize\0" \ - "loadimage=load mmc ${bootpart} ${loadaddr} ${bootdir}/${bootfile}\0" \ - "loadfdt=load mmc ${bootpart} ${fdtaddr} ${bootdir}/${fdtfile}\0" \ - "mmcloados=run mmcargs; " \ - "bootz ${loadaddr} - ${fdtaddr};\0" \ - "mmcboot=mmc dev ${mmcdev}; " \ - "if mmc rescan; then " \ - "echo SD/MMC found on device ${mmcdev};" \ - "if run loadbootenv; then " \ - "echo Loaded environment from ${bootenv};" \ - "run importbootenv;" \ - "fi;" \ - "if test -n $uenvcmd; then " \ - "echo Running uenvcmd ...;" \ - "run uenvcmd;" \ - "fi;" \ - "if run loadimage; then " \ - "run loadfdt;" \ - "run mmcloados;" \ - "fi;" \ - "fi;\0" \ - "netboot=echo Booting from network ...; " \ - "setenv autoload no; " \ - "dhcp; " \ - "tftp ${loadaddr} ${bootfile}; " \ - "tftp ${fdtaddr} ${fdtfile}; " \ - "run netargs; " \ - "bootz ${loadaddr} - ${fdtaddr}\0" \ - "mtdids=" CONFIG_MTDIDS_DEFAULT "\0" \ - "mtdparts=" CONFIG_MTDPARTS_DEFAULT "\0" \ - "nandargs=setenv bootargs console=${console} " \ - "${optargs} " \ - "root=${nandroot} " \ - "rootfstype=${nandrootfstype}\0" \ - "nandroot=ubi0:rootfs rw ubi.mtd=7,2048\0" \ - "nandrootfstype=ubifs rootwait=1\0" \ - "nandboot=echo Booting from nand ...; " \ - "run nandargs; " \ - "nand read ${fdtaddr} u-boot-spl-os; " \ - "nand read ${loadaddr} kernel; " \ - "bootz ${loadaddr} - ${fdtaddr}\0" -#endif - -#define CONFIG_BOOTCOMMAND \ - "run mmcboot;" \ - "run nandboot;" - -/* NS16550 Configuration: primary UART via FTDI */ -#define CONFIG_SYS_NS16550_COM1 0x44e09000 - -/* I2C Configuration */ -#define CONFIG_SYS_I2C_SPEED 100000 -#define CONFIG_ENV_EEPROM_IS_ON_I2C -#define CONFIG_SYS_I2C_EEPROM_ADDR 0x50 -#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 2 - -/* SPL */ - -/* NAND support */ - -/* NAND Configuration. */ -#define CONFIG_SYS_NAND_5_ADDR_CYCLE -#define CONFIG_SYS_NAND_PAGE_COUNT (CONFIG_SYS_NAND_BLOCK_SIZE / \ - CONFIG_SYS_NAND_PAGE_SIZE) -#define CONFIG_SYS_NAND_PAGE_SIZE 4096 -#define CONFIG_SYS_NAND_OOBSIZE 224 -#define CONFIG_SYS_NAND_ONFI_DETECTION -#define CONFIG_SYS_NAND_BLOCK_SIZE (128*4096) -#define CONFIG_SYS_NAND_BAD_BLOCK_POS NAND_LARGE_BADBLOCK_POS -#define CONFIG_SYS_NAND_ECCPOS { 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15, 16, 17,\ - 18, 19, 20, 21, 22, 23, 24, 25, 26, 27, 28, 29, 30, 31, 32, 33,\ - 34, 35, 36, 37, 38, 39, 40, 41, 42, 43, 44, 45, 46, 47, 48, 49,\ - 50, 51, 52, 53, 54, 55, 56, 57, 58, 59, 60, 61, 62, 63, 64, 65,\ - 66, 67, 68, 69, 70, 71, 72, 73, 74, 75, 76, 77, 78, 79, 80, 81,\ - 82, 83, 84, 85, 86, 87, 88, 89, 90, 91, 92, 93, 94, 95, 96, 97,\ - 98, 99, 100, 101, 102, 103, 104, 105, 106, 107, 108, 109, 110, 111, 112, 113,\ - 114, 115, 116, 117, 118, 119, 120, 121, 122, 123, 124, 125, 126, 127, 128, 129, 130, 131, 132, 133,\ - 134, 135, 136, 137, 138, 139, 140, 141, 142, 143, 144, 145, 146, 147, 148, 149, 150, 151, 152, 153,\ - 154, 155, 156, 157, 158, 159, 160, 161, 162, 163, 164, 165, 166, 167, 168, 169, 170, 171, 172, 173,\ - 174, 175, 176, 177, 178, 179, 180, 181, 182, 183, 184, 185, 186, 187, 188, 189, 190, 191, 192, 193,\ - 194, 195, 196, 197, 198, 199, 200, 201, 202, 203, 204, 205, 206, 207, 208, 209} - -#define CONFIG_SYS_NAND_ECCSIZE 512 -#define CONFIG_SYS_NAND_ECCBYTES 26 -#define CONFIG_SYS_NAND_ECCSTEPS 8 -#define CONFIG_SYS_NAND_ECCTOTAL (CONFIG_SYS_NAND_ECCBYTES * \ - CONFIG_SYS_NAND_ECCSTEPS) -#define CONFIG_NAND_OMAP_ECCSCHEME OMAP_ECC_BCH16_CODE_HW -/* END NAND Configuration. */ - -#define CONFIG_SYS_NAND_U_BOOT_START CONFIG_SYS_TEXT_BASE -/* #define CONFIG_SYS_NAND_U_BOOT_OFFS 0x80000 */ -#define CONFIG_SYS_NAND_U_BOOT_OFFS 0x200000 - -/* Size must be a multiple of Nand erase size (524288 b) */ -#define CONFIG_SYS_ENV_SECT_SIZE (128 << 10) /* 128 KiB */ -/* NAND: SPL falcon mode configs */ -#ifdef CONFIG_SPL_OS_BOOT -#define CONFIG_SYS_NAND_SPL_KERNEL_OFFS 0x280000 -#endif - -/* - * USB configuration. We enable MUSB support, both for host and for - * gadget. We set USB0 as peripheral and USB1 as host, based on the - * board schematic and physical port wired to each. Then for host we - * add mass storage support. - */ -#define CONFIG_AM335X_USB0 -#define CONFIG_AM335X_USB0_MODE MUSB_PERIPHERAL -#define CONFIG_AM335X_USB1 -#define CONFIG_AM335X_USB1_MODE MUSB_HOST - -/* Network */ -#define CONFIG_PHY_RESET 1 - -#endif /* ! __CONFIG_PENGWYN_H */ diff --git a/include/configs/pepper.h b/include/configs/pepper.h deleted file mode 100644 index 662fce3355..0000000000 --- a/include/configs/pepper.h +++ /dev/null @@ -1,78 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0+ */ -/* - * Copyright (C) 2013 Gumstix, Inc. - http://www.gumstix.com/ - */ - -#ifndef __CONFIG_PEPPER_H -#define __CONFIG_PEPPER_H - -#include <configs/ti_am335x_common.h> - -/* Clock defines */ -#define V_OSCK 24000000 /* Clock output from T2 */ -#define V_SCLK (V_OSCK) - -#define CONFIG_SYS_I2C_EEPROM_ADDR 0x50 - -/* Mach type */ -#define CONFIG_MACH_TYPE MACH_TYPE_PEPPER - -#define CONFIG_EXTRA_ENV_SETTINGS \ - DEFAULT_LINUX_BOOT_ENV \ - "bootdir=/boot\0" \ - "bootfile=zImage\0" \ - "fdtfile=am335x-pepper.dtb\0" \ - "console=ttyO0,115200n8\0" \ - "optargs=\0" \ - "mmcdev=0\0" \ - "mmcroot=/dev/mmcblk0p2 rw\0" \ - "mmcrootfstype=ext4 rootwait\0" \ - "mmcargs=setenv bootargs console=${console} " \ - "${optargs} " \ - "root=${mmcroot} " \ - "rootfstype=${mmcrootfstype}\0" \ - "bootenv=uEnv.txt\0" \ - "loadbootenv=load mmc ${mmcdev} ${loadaddr} ${bootenv}\0" \ - "importbootenv=echo Importing environment from mmc ...; " \ - "env import -t ${loadaddr} ${filesize}\0" \ - "mmcload=load mmc ${mmcdev}:2 ${loadaddr} ${bootdir}/${bootfile}; " \ - "load mmc ${mmcdev}:2 ${fdtaddr} ${bootdir}/${fdtfile}\0" \ - "loaduimage=fatload mmc ${mmcdev}:1 ${loadaddr} uImage\0" \ - "uimageboot=echo Booting from mmc${mmcdev} ...; " \ - "run mmcargs; " \ - "bootm ${loadaddr}\0" \ - "mmcboot=echo Booting from mmc ...; " \ - "run mmcargs; " \ - "bootz ${loadaddr} - ${fdtaddr}\0" \ - "ubiboot=echo Booting from nand (ubifs) ...; " \ - "run ubiargs; run ubiload; " \ - "bootz ${loadaddr} - ${fdtaddr}\0" \ - -#define CONFIG_BOOTCOMMAND \ - "mmc dev ${mmcdev}; if mmc rescan; then " \ - "echo SD/MMC found on device ${mmcdev};" \ - "if run loadbootenv; then " \ - "echo Loaded environment from ${bootenv};" \ - "run importbootenv;" \ - "fi;" \ - "if test -n $uenvcmd; then " \ - "echo Running uenvcmd ...;" \ - "run uenvcmd;" \ - "fi;" \ - "if run mmcload; then " \ - "run mmcboot;" \ - "fi;" \ - "if run loaduimage; then " \ - "run uimageboot;" \ - "fi;" \ - "fi;" \ - -/* Serial console configuration */ -#define CONFIG_SYS_NS16550_COM1 0x44e09000 - -/* Ethernet support */ -#define CONFIG_PHY_RESET_DELAY 1000 - -/* SPL */ - -#endif /* __CONFIG_PEPPER_H */ diff --git a/include/configs/siemens-am33x-common.h b/include/configs/siemens-am33x-common.h index d146ba51de..6827552081 100644 --- a/include/configs/siemens-am33x-common.h +++ b/include/configs/siemens-am33x-common.h @@ -68,10 +68,7 @@ #define CONFIG_SYS_PTV 2 /* Divisor: 2^(PTV+1) => 8 */ /* NS16550 Configuration */ -#ifdef CONFIG_SPL_BUILD #define CONFIG_SYS_NS16550_SERIAL -#define CONFIG_SYS_NS16550_REG_SIZE (-4) -#endif #define CONFIG_SYS_NS16550_CLK (48000000) #define CONFIG_SYS_NS16550_COM1 0x44e09000 #define CONFIG_SYS_NS16550_COM4 0x481a6000 |