summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2018-12-26ARM: mach-omap2: omap3: Fix GPIO clocking in SPLAdam Ford
OMAP3_GPIO_x is needed to enable each GPIO bank on the OMAP3 boards. At one point, the #ifdef's were replaced with if CONFIG_IS_ENABLED but this won't work for people who need OMAP3_GPIO_x in SPL since the SPL prefix for this option isn't used in Kconfig. This patch moves the check to #if defined and also makes Kconfig select the banks if CMD_GPIO is used which makes the checks in the code less cumbersome. Fixes: bd8a9c14c91c ("arm: mach-omap2/omap3/clock.c: Enable all GPIO with CMD_GPIO") Reported-by: Liam O'Shaughnessy <liam.o.shaughnessy@gumstix.com> Signed-off-by: Adam Ford <aford173@gmail.com> [trini: Migrate omap3_igep00x0.h] Signed-off-by: Tom Rini <trini@konsulko.com>
2018-12-26tests: enable DT overlay tests by defaultHeinrich Schuchardt
Enable device tree overlay tests by default if unit tests are selected and the runtime is configured via device tree. Overlays have been mainlined in the device tree compiler so there is no reason anymore to disable the tests by default. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2018-12-26scripts/check-config.sh: Add usage()Andy Shevchenko
When arguments are not supplied the error message is misleading and doesn't tell what exactly has to be done. Fix this by adding usage() and call it if above circumstance occurs. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2018-12-21Merge git://git.denx.de/u-boot-marvellTom Rini
- Fix breakage in helios4: Change U-Boot offset on SPI Flash - Enable CONFIG_BLK for db-88f6820-amc
2018-12-21Merge branch 'master' of git://git.denx.de/u-boot-socfpgaTom Rini
- stratix10 updates
2018-12-21Merge tag 'u-boot-amlogic-20181219' of git://git.denx.de/u-boot-amlogicTom Rini
A single fix to properly enable eMMC on the AXG S400 board.
2018-12-21Merge tag 'mips-updates-for-2019.11' of git://git.denx.de/u-boot-mipsTom Rini
- mips: fix some DTC warnings - bmips: bcm6348: add DMA driver - bmips: bcm5348: add ethernet driver - bmips: bcm6368: add ethernet driver - mips: mt76xx: fix DMA problems, disable CONFIG_OF_EMBED - mips: mscc: add support for Microsemi Ocelot and Luton SoCs - mips: mscc: add support for Ocelot and Luton evaluation boards - mips: jz47xx: add basic support for Ingenic JZ4780 SoC - mips: jz47xx: add support for Imgtec Creator CI20 board
2018-12-21Merge git://git.denx.de/u-boot-riscvTom Rini
- Add DM drivers to support RISC-V CPU and timer, plus some bug fixes. - Support SiFive UART - Rename ax25-ae350 defconfig
2018-12-21arm: mvebu: configs: helios4: Change U-Boot offset on SPI FlashAditya Prayoga
SPI flash support on Helios4 [1] has been merge to u-boot/master on commit 8cb8c0c6a83bef ("Merge git://git.denx.de/u-boot-marvell") However, the SPI image build failed after the merge with following message: COPY spl/u-boot-spl.bin MKIMAGE u-boot-spl.kwb Error: Image header (incl. SPL image) too big! header=0x20816 CONFIG_SYS_U_BOOT_OFFS=0x20000! Increase CONFIG_SYS_U_BOOT_OFFS! Error: Image header (incl. SPL image) too big! header=0x20816 CONFIG_SYS_U_BOOT_OFFS=0x20000! Increase CONFIG_SYS_U_BOOT_OFFS! Could not create image Makefile:1162: recipe for target 'u-boot-spl.kwb' failed make: *** [u-boot-spl.kwb] Error 1 Let's increase the u-boot offset to 0x30000 to accommodate SPL changes and leave some margin for future changes. [1] https://patchwork.ozlabs.org/patch/1007762/ Signed-off-by: Aditya Prayoga <aditya@kobol.io> Reviewed-by: Stefan Roese <sr@denx.de> Signed-off-by: Stefan Roese <sr@denx.de>
2018-12-21ARM: mvebu: remove out of date commentChris Packham
The Marvell DDR3 training code is now part of the U-Boot SPL so the comment saying it needs porting is no longer correct. Signed-off-by: Chris Packham <judge.packham@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de> Signed-off-by: Stefan Roese <sr@denx.de>
2018-12-21ARM: mvebu: define CONFIG_BLK for db-88f6820-amcChris Packham
db-88f6820-amc uses CONFIG_DM_USB and CONFIG_USB_STORAGE already so define CONFIG_BLK to prepare it for full conversion to DM. Signed-off-by: Chris Packham <judge.packham@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de> Signed-off-by: Stefan Roese <sr@denx.de>
2018-12-20arm: socfpga: stratix10: Enable Stratix10 FPGA ReconfigurationAng, Chee Hong
Select CONFIG_FPGA_STRATIX10 for CONFIG_TARGET_SOCFPGA_STRATIX10. Signed-off-by: Ang, Chee Hong <chee.hong.ang@intel.com>
2018-12-20arm: socfpga: stratix10: Add Stratix10 FPGA into FPGA device tableAng, Chee Hong
Enable 'fpga' command in u-boot. User will be able to use the FPGA command to program the FPGA on Stratix10 SoC. Signed-off-by: Ang, Chee Hong <chee.hong.ang@intel.com>
2018-12-20arm: socfpga: stratix10: Add Stratix 10 FPGA Reconfiguration DriverAng, Chee Hong
Enable FPGA reconfiguration support for Stratix 10 SoC. Signed-off-by: Ang, Chee Hong <chee.hong.ang@intel.com>
2018-12-20arm: socfpga: stratix10: Add macros for mailbox's argumentsAng, Chee Hong
Add macros for specifying number of arguments in mailbox command. Signed-off-by: Ang, Chee Hong <chee.hong.ang@intel.com>
2018-12-20arm: socfpga: stratix10: Add generic FPGA reconfig mailbox API for S10Ang, Chee Hong
Add a generic mailbox API for FPGA reconfig status which can be called by others. This new function accepts 2 different mailbox commands: CONFIG_STATUS or RECONFIG_STATUS. Signed-off-by: Ang, Chee Hong <chee.hong.ang@intel.com>
2018-12-19arm: dts: s400: Fix status for eMMC and SDIO portsNeil Armstrong
Under U-boot, the WiFi SDIO Module should be disabled and the eMMC modules should be enabled, so this patch adds an s400-u-boot.dtsi include file specific for U-Boot that will be included by the build system. Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Tested-by: Jerome Brunet <jbrunet@baylibre.com>
2018-12-19mips: jz47xx: Add Creator CI20 platformPaul Burton
Add support for the Creator CI20 platform based on the JZ4780 SoC. Cc: Daniel Schwierzeck <daniel.schwierzeck@gmail.com> Signed-off-by: Paul Burton <paul.burton@imgtec.com> Signed-off-by: Marek Vasut <marek.vasut@gmail.com> Signed-off-by: Ezequiel Garcia <ezequiel@collabora.com> Reviewed-by: Marek Vasut <marex@denx.de>
2018-12-19mips: jz47xx: Add JZ4780 SoC supportPaul Burton
Add initial support for the Ingenic JZ47xx MIPS SoC. Cc: Daniel Schwierzeck <daniel.schwierzeck@gmail.com> Signed-off-by: Paul Burton <paul.burton@imgtec.com> Signed-off-by: Marek Vasut <marek.vasut@gmail.com> Signed-off-by: Ezequiel Garcia <ezequiel@collabora.com> Reviewed-by: Marek Vasut <marex@denx.de>
2018-12-19mips: Add SPL headerPaul Burton
Add header with SPL boot mode and type definitions. Cc: Daniel Schwierzeck <daniel.schwierzeck@gmail.com> Signed-off-by: Paul Burton <paul.burton@imgtec.com> Signed-off-by: Marek Vasut <marek.vasut@gmail.com>
2018-12-19mmc: Add JZ47xx SD/MMC controller driverPaul Burton
Add driver for the JZ47xx MSC controller. Cc: Daniel Schwierzeck <daniel.schwierzeck@gmail.com> Signed-off-by: Paul Burton <paul.burton@imgtec.com> Signed-off-by: Marek Vasut <marek.vasut@gmail.com> Signed-off-by: Ezequiel Garcia <ezequiel@collabora.com> Reviewed-by: Marek Vasut <marex@denx.de>
2018-12-19misc: Add JZ47xx efuse driverPaul Burton
Add driver for the efuse block in the JZ47xx SOC. Cc: Daniel Schwierzeck <daniel.schwierzeck@gmail.com> Signed-off-by: Paul Burton <paul.burton@imgtec.com> Signed-off-by: Marek Vasut <marek.vasut@gmail.com> Signed-off-by: Ezequiel Garcia <ezequiel@collabora.com> Reviewed-by: Marek Vasut <marex@denx.de>
2018-12-19MSCC: add board support for the Luton based evaluation boardGregory CLEMENT
Adding the support for the Luton boards PCB91 which share common code with the Ocelots boards, including board code, device tree and configuration. Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
2018-12-19MSCC: add board support for the Ocelots based evaluation boardsGregory CLEMENT
Adding the support for 2 boards sharing common code for Ocelot chip: PCB120 and PCB123 Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
2018-12-19MSCC: add support for Luton SoCsGregory CLEMENT
As the Ocelots SoCs, this family of SoCs are found in the Microsemi Switches solution. Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
2018-12-19MSCC: add support for Ocelot SoCsGregory CLEMENT
This family of SoCs are found in the Microsemi Switches solution and have already a support in the linux kernel. Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
2018-12-19MIPS: Allow to prefetch and lock instructions into cacheGregory CLEMENT
This path add a new helper allowing to prefetch and lock instructions into cache. This is useful very early in the boot when no RAM is available yet. Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
2018-12-19MIPS: move create_tlb() in an proper header: mipsregs.hGregory CLEMENT
Export create_tlb() as an inline function in mipsregs.h. It allows to remove the declaration of the function from the board files. Then it will allow also to use this function very early in the boot when the stack is not usable. Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
2018-12-19MIPS: remove local_irq_[save|restore] from CP0 macrosDaniel Schwierzeck
With moving write_on_tlb() to arch/mips/include/asm/mipsregs.h there are now compiler warnings when some generic code includes asm/io.h. This happens for example when enabling OF live tree. Signed-off-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
2018-12-19gpio: mscc-bitbang-spi: Add a simple gpio driver for bitbgang spiGregory CLEMENT
The VCore III SoCs such as the Luton but also the Ocelot can remap an SPI flash directly in memory. However, for writing in the flash the communication has to be done by software. Each of the signal used for the SPI are exposed in a single register. In order to be able to use the soft-spi driver, the management of this pin is done through this simple gpio driver. Even if the main purpose of this driver is to be used by soft-spi, it can still be used as a normal gpio driver but with limitation: for example the first pin can't be used as output. Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com> Reviewed-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
2018-12-19pinctrl: mscc: Add gpio and pinctrl driver for MSCC MIPS SoCs (VcoreIII based)Gregory CLEMENT
This driver supports the pin and gpio controller found in the Ocelot and Luton SoCs. The driver was inspired from the pinctrl driver in Linux, but was simplified and was modified to allow supporting an other SoCs (Luton). For Ocelot and Luton the controller is the same, only the pins to program differ. Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com> Reviewed-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com> [changed to only descend into mscc/ dependent on CONFIG_PINCTRL_MSCC] Signed-off-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
2018-12-19DW SPI: Allow to overload the management of the external CSGregory CLEMENT
On some platforms, as the Ocelot ones, when wanting to control the CS through software, it is not possible to do it through the GPIO controller. Indeed, this signal is managed through a dedicated range of registers inside the SoC.. By declaring the external_cs_manage function as weak, it is possible to manage the CS at platform level and then using the appropriate registers. Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
2018-12-19mips: mt76xx: linkit/gardena: Don't use CONFIG_OF_EMBEDStefan Roese
Building with CONFIG_OF_EMBED generates build warnings, as it should only be used for debugging purposes. So let's move all MT7688 targets to CONFIG_OF_SEPARATE instead with this patch. Signed-off-by: Stefan Roese <sr@denx.de> Cc: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
2018-12-19mips: mt76xx: Flush d-cache in arch_misc_init() to solve d-cache issuesStefan Roese
It has been noticed, that sometimes the d-cache is not in a "clean-state" when U-Boot is running on MT7688. This was detected when using the ethernet driver (which uses d-cache) and a TFTP command does not complete. Flushing the complete d-cache (again?) here seems to fix this issue. Signed-off-by: Stefan Roese <sr@denx.de> Cc: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
2018-12-19mips: xilfpga: fix DTC warningsDaniel Schwierzeck
This fixes following DTC warning: arch/mips/dts/nexys4ddr.dtb: Warning (compatible_is_string_list): /ethernet@10e00000/mdio/phy@1:compatible: property is not a string list As upstream DTS in Linux doesn't have the offending property, simply remove it to fix the warning. Signed-off-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
2018-12-19mips: ath79: fix DTC warningsDaniel Schwierzeck
Remove all interrupt nodes that cause warnings regarding a missing interrupt parent. There are no interrupt controller nodes defined and the device trees don't match the ones in Linux anymore. Signed-off-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
2018-12-19bmips: enable ar-5315u enet supportÁlvaro Fernández Rojas
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
2018-12-19bmips: bcm6318: add support for bcm6368-enetÁlvaro Fernández Rojas
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
2018-12-19bmips: enable vr-3032u enet supportÁlvaro Fernández Rojas
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
2018-12-19bmips: bcm63268: add support for bcm6368-enetÁlvaro Fernández Rojas
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
2018-12-19bmips: enable dgnd3700v2 enet supportÁlvaro Fernández Rojas
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
2018-12-19bmips: bcm6362: add support for bcm6368-enetÁlvaro Fernández Rojas
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
2018-12-19bmips: enable ar-5387un enet supportÁlvaro Fernández Rojas
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
2018-12-19bmips: bcm6328: add support for bcm6368-enetÁlvaro Fernández Rojas
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
2018-12-19bmips: enable wap-5813n enet supportÁlvaro Fernández Rojas
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
2018-12-19bmips: bcm6368: add support for bcm6368-enetÁlvaro Fernández Rojas
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
2018-12-19net: add support for bcm6368-enetÁlvaro Fernández Rojas
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com> Reviewed-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
2018-12-19bmips: enable nb4-ser enet supportÁlvaro Fernández Rojas
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
2018-12-19bmips: enable hg556a enet supportÁlvaro Fernández Rojas
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
2018-12-19bmips: bcm6358: add support for bcm6348-enetÁlvaro Fernández Rojas
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
generated by cgit (git 2.34.1) at 2024-12-27 13:39:30 +0000