summaryrefslogtreecommitdiff
path: root/arch/arm/dts
AgeCommit message (Collapse)Author
2019-05-09rockchip: rk3399: Add Nanopc T4 board supportJagan Teki
Add initial support for Nanopc T4 board. Specification - Rockchip RK3399 - Dual-Channel 4GB LPDDR3-1866 - SD card slot - 16GB eMMC - RTL8211E 1Gbps - AP6356S WiFI/BT - HDMI In/Out, DP, MIPI DSI/CSI, eDP - USB 3.0, 2.0 - USB Type C power and data - GPIO expansion ports - DC 12V/2A Commit details of rk3399-nanopc-t4.dts sync from Linux 5.1-rc2: "arm64: dts: rockchip: Add NanoPC-T4 IR receiver" (sha1: 95658e21b1707ad7844f873db2fdaa295109a5a3) Tested-by: Daniel Gröber <dxld@darkboxed.org> Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2019-05-09rockchip: rk3399: Add Nanopi M4 board supportJagan Teki
Add initial support for Nanopi M4 board. Specification - Rockchip RK3399 - Dual-Channel 4GB LPDDR3-1866 - SD card slot - eMMC socket - RTL8211E 1Gbps - AP6356S WiFI/BT - HDMI In/Out, DP, MIPI DSI/CSI - USB 3.0 x4 - USB Type C power and data - GPIO1, GPIO2 expansion ports - DC5V/3A Commit details of rk3399-nanopi-m4.dts sync from Linux 5.1-rc2: "arm64: dts: rockchip: Refine nanopi4 differences" (sha1: c62ffaf5026d0b7633e62b2cea8450b5543c349a) Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> Reviewed-by: Kever Yang <kever.yang@rock-chips.com> Reviewed-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
2019-05-09rockchip: dts: rk3399: nanopi4: Use CD pin as RK_FUNC_1Jagan Teki
Attaching GPIO functionality to SDMMC0_DET pin (which does in Linux base dts) make dwmmc driver "fail to detect the card". Card did not respond to voltage select! It may be because the existing driver can't support gpio card detection. So, change the pinctrl functionality from RK_FUNC_GPIO to RK_FUNC_1 like other rk3399 dts does via sdmmc_cd pin. Cc: Robin Murphy <robin.murphy@arm.com> Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2019-05-08rockchip: dts: rk3399: Sync rk3399-nanopi4.dtsi from LinuxJagan Teki
Sync rk3399-nanopi4.dtsi from Linux 5.1-rc2 tag. Linux commit details about the rk3399-nanopi4.dtsi sync: "arm64: dts: rockchip: Add nanopi4 bluetooth" (sha1: 3e2f0bb72be36aa6c14ee7f11ac4dd8014801030) Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> Reviewed-by: Paul Kocialkowski <paul.kocialkowski@bootlin.com> Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2019-05-08rockchip: dts: rk3399: Sync pwm2_pin_pull_down from Linux 5.1-rc2Jagan Teki
To make successful build with dts(i) files syncing from Linux 5.1-rc2 the rk3399.dtsi would require pwm2_pin_pull_down. So, sync the pwm2_pin_pull_down node from Linux 5.1-rc2. Since this node is strictly not part of any commit alone, I have mentioned Linux 5.1-rc2 tag for future reference of where would this sync coming from. Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> Reviewed-by: Paul Kocialkowski <paul.kocialkowski@bootlin.com> Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2019-05-08arm64: rockchip: dts: rk3399: Use rk3399-u-boot.dtsiJagan Teki
Now we have - board specific -u-boot.dtsi files for board specific u-boot dts changes. - soc specific rk3399-u-boot.dtsi for soc specific u-boot dts changes. So, include the rk3399-u-boot-dtsi on respective board -u-boot.dtsi and drop the properties which are globally available in rk3399-u-boot.dtsi Right now rk3399-u-boot.dtsi has sdmmc, spi1 u-boot,dm-pre-reloc property and more properties and nodes can be move further based on the requirements. This would fix, the -u-boot.dtsi inclusion for evb, firefly, puma boards that was accidentally merged on below commit. "rockchip: dts: rk3399: Create initial rk3399-u-boot.dtsi" (sha1: e05b4a4fa84b65a0c8873e8f34721741fe2bc09d) Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2019-05-08rockchip: dts: rk3399-u-boot: Add u-boot, dm-pre-reloc for spi1Jagan Teki
Add u-boot,dm-pre-reloc property for spi1, so-that the subsequent rk3399 boards which boot from SPI. This help to separate the u-boot specific properties away from base dts files so-that the Linux sync become easy and meaningful. Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2019-05-08arm64: rockchip: dts: rk3399: Add board -u-boot.dtsi filesJagan Teki
Devicetree files in RK3399 platform is synced from Linux, like other platforms does. Apart from these u-boot in rk3399 would also require some u-boot specific node like dmc. dmc node has big chunk of DDR timing parameters which are specific to specific board, and maintained with rk3399-sdram*.dtsi. So, create board specific -u-boot.dtsi files and move these sdram dtsi files accordingly. This would help of maintain u-boot specific changes separately without touching Linux dts(i) files which indeed easy for syncing from Linux between releases. These board specific -u-boot.dtsi can be extendible to add more u-boot specific nodes or properties in future. Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2019-05-08dts: Makefile: Build rockchip dtbs based on SoC typesJagan Teki
- Sometimes u-boot specific dtsi files are included automatically which would build for entire rockchip SoC, even-though the respective dtsi should used it for specific family of rockchip SoC. - Sometimes u-boot specific dts nodes or properties can use config macros from respective rockchip family include/configs files, example CONFIG_SPL_PAD_TO. So, it's better to compile the dtbs based on the respective rockchip family types rather than rockchip itself to avoid compilation issues. This patch organize the existing dtb's based on the rockchip family types. Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2019-05-08rockchip: chromebook_minnie: Enable soundSimon Glass
Enable sound for this board, which has the same codec as jerry. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
2019-05-08rockchip: px5: add timer0 dts node as tick timerKever Yang
Let's use rockchip timer before stimer patches can be merged. Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
2019-05-08rockchip: px5 update dts for spl/tplKever Yang
TPL need dmc to init ddr sdram, and emmc, boot-order. Signed-off-by: Kever Yang <kever.yang@rock-chips.com> Tested-by: Andy Yan <andy.yan@rock-chips.com>
2019-05-08rockchip: rk322x: dts: enable uart2 for SPL/TPLKever Yang
When we use DM_SERIAL for serial driver, we need enable the dts node for the debug console. Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
2019-05-07Merge branch 'master' of git://git.denx.de/u-boot-shTom Rini
- RZ/A1 addition. - Old board removal.
2019-05-07ARM: dts: renesas: Add RZ/A1 GR-Peach boardChris Brandt
Add board code and DTs for Renesas RZ/A1 SoC-based GR-Peach, which is a cheap development platform with RZ/A1H SoC. The DTs are imported from Linux 5.0.11, commit d5a2675b207d . Currently supported are UART, ethernet and RPC SPI. The board can be booted from RPC SPI by writing the u-boot.bin binary to the beginning of the SPI NOR, e.g. using the "sf" command. The board can also be booted via JTAG by setting text base to 0x20020000, loading u-boot.bin there via JTAG and executing it from that address. Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com> Cc: Chris Brandt <chris.brandt@renesas.com> Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
2019-05-07ARM: dts: renesas: Add RZ/A1 platform codeChris Brandt
Add platform code and DTs for Renesas RZ/A1 R7S72100 SoC. Distinguishing feature of this SoC is that it has up to 10 MiB of on-SoC static RAM (SRAM). The DTs are imported from Linux 5.0.11, commit d5a2675b207d . Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com> Cc: Chris Brandt <chris.brandt@renesas.com> Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
2019-05-06arm: dts: Stratix10: Add SDRAM nodeLey Foon Tan
Add SDRAM device tree node. Signed-off-by: Ley Foon Tan <ley.foon.tan@intel.com>
2019-05-03Merge git://git.denx.de/u-boot-socfpgaTom Rini
- Misc MMC, FPGA bridge, general SoCFPGA fixes
2019-05-03Merge branch '2019-05-03-master-imports'Tom Rini
- Various btrfs fixes - Various TI platform fixes - Other fixes (cross build, taurus update, Kconfig help text)
2019-05-03ARM: dts: logicpd-som-lv: Fix MMC1 card detectAdam Ford
The card detect pin was incorrectly using IRQ_TYPE_LEVEL_LOW instead of GPIO_ACTIVE_LOW when reading the state of the CD pin. Without this patch, MMC1 won't be detected. This is the same patch submitted to linux-omap, but I was hoping to get it applied to U-Boot without having to wait for the linux adoption and then backporting. Fixes: 5448ff33f281 ("ARM: DTS: Resync Logic PD SOM-LV 37xx devkit with Linux 4.18-RC4") Signed-off-by: Adam Ford <aford173@gmail.com>
2019-05-03ti: Add device-tree for am335x-pocketbeagle.Vagrant Cascadian
Add device-tree files from linux 5.1-rc7 needed to complete support for PocketBeagle. Signed-off-by: Vagrant Cascadian <vagrant@debian.org> Reviewed-by: Tom Rini <trini@konsulko.com>
2019-05-03arm: dts: k3-am654: Sync IOPAD macros with LinuxAndreas Dannenberg
Transition to the IOPAD macros as used in Linux in which the pin mux mode is specified using a dedicated parameter while also dropping the related MUX_MODEx macros that are no longer needed. This transition will allow us to keep both Linux and U-Boot DTS in sync more easily. While at it also align the file name of the include file itself and update any references accordingly. Signed-off-by: Andreas Dannenberg <dannenberg@ti.com> Reviewed-by: Lokesh Vutla <lokeshvutla@ti.com>
2019-05-03at91: cleanup taurus portHeiko Schocher
- at91sam9g20-taurus.dts: use labels - cleanup taurus port to compile clean with current mainline again. SPL has no serial output anymore, so it fits into SRAM. Signed-off-by: Heiko Schocher <hs@denx.de>
2019-05-03armv7R: dts: k3: am654: Switch DMSC TX message thread IDAndreas Dannenberg
Switch from using the high priority DMSC transmit message queue used by the secure R5 MCU island boot context to the low priority message queue. While the change in priority is irrelevant for the current boot architecture it however gives us access to a deeper message queue that will allow us to buffer more messages. This is an important aspect when sending several messages without requesting and waiting for a response in a row which is a communication scheme used during core shutdown for example. See AM654 TISCI User Guide for additional details. Signed-off-by: Andreas Dannenberg <dannenberg@ti.com> Reviewed-by: Lokesh Vutla <lokeshvutla@ti.com>
2019-05-01Merge tag 'rockchip-for-2019.07' of git://git.denx.de/u-boot-rockchipTom Rini
Improvements and new features: - improved SPI driver for better read throughput - refactors initialisation of debug UART init - restructures header file paths - adds pinctrl improvements Adds Kever as a co-custodian.
2019-05-01Merge tag 'u-boot-imx-20190426' of git://git.denx.de/u-boot-imxTom Rini
Porting to DM and i.MX8 ------------------------ - warp7 to DM - kp_imx53 to DM - Warnings in DT - MX8QM support - colibri-imx6ull to DM - imx7d-pico to DM - ocotp for MX8
2019-05-01rockchip: rk3399: Add Orangepi RK3399 supportJagan Teki
Add initial support for Orangepi RK3399 board. Specification - Rockchip RK3399 - 2GB/4GB DDR3 - 16GB eMMC - SD card slot - RTL8211E 1Gbps - AP6356S WiFI/BT - HDMI In/Out, DP, MIPI DSI/CSI - Mini PCIe - Sensors, Keys etc - DC12V-2A and DC5V-2A Commit details about Linux DTS sync: "arm64: dts: rockchip: Add support for the Orange Pi RK3399" (sha1: d3e71487a790979057c0fdbf32f85033639c16e6) Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> Reviewed-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
2019-05-01rockchip: dts: rk3399: Create initial rk3399-u-boot.dtsiJagan Teki
u-boot,dm-pre-reloc is required for SDMMC booted rk3399 boards and which is U-Boot specific devicetrees binding. Move it on global rk3399-u-boot.dtsi file and rest of the U-Boot bindings will move it future based on the requirement. This would help to sync the devicetrees from Linux whenever required instead of adding specific nodes. Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> Reviewed-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
2019-05-01rockchip: dts: rk3399: Sync rk3399-opp from LinuxJagan Teki
Sync rk3399-opp.dtsi from Linux. Linux commit details about the rk3399-opp.dtsi sync: "arm64: dts: rockchip: use SPDX-License-Identifier" (sha1: 4ee99cebd486238ac433da823b95cc5f8d8a6905) Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> Reviewed-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
2019-04-29dts: arm: socfpga: fix socfpga_de10_nano consoleSimon Goldschmidt
Booting this board failed as the initial console isn't found since commit c402e8170245 ("dts: arm: socfpga: merge gen5 devicetrees from linux") The uart0 devicetree entry was missing "clock-frequency = <100000000>:" since that commit Fixes: c402e8170245 ("dts: arm: socfpga: merge gen5 devicetrees from linux") Reported-by: rafael mello <rafaelmello_3@hotmail.com> Signed-off-by: Simon Goldschmidt <simon.k.r.goldschmidt@gmail.com>
2019-04-26arm: dts: add missing vexpress device treesHeinrich Schuchardt
Add the device trees for * vexpress_ca5x2_defconfig * vexpress_ca9x4_defconfig * vexpress_ca15_tc2_defconfig as available in Linux 5.1 rc5. We are using the vexpress_ca15_tc2_defconfig and vexpress_ca9x4_defconfig for Travis testing via QEMU. The UEFI base Embedded Base Boot Requirements Specification (EBBR) requires that an embedded board either provides a device tree or an ACPI table. All block devices are meant to be moved to the driver model. On ARM this requires a device tree. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2019-04-26ARM: kirkwood: add db-88f6281-bp boardChris Packham
This is Marvell's Kirkwood development board. It has the following features - 512M DDR2 - 2 PCI connectors - 1 x1 PCI-e interface - 1 Gigabit Ethernet Port - 2 SATA Ports - USB 2.0 Interface - SDIO - 128M NAND Flash - 16M SPI Flash It can be strapped to boot from SPI or NAND so there are two defconfigs (one per boot media). Signed-off-by: Chris Packham <judge.packham@gmail.com> Signed-off-by: Stefan Roese <sr@denx.de>
2019-04-26arm: kirkwood: dts: Add openrd-* dtb makefile build targetsStefan Roese
The following Kirkwood dtb build targets are currently missing: kirkwood-openrd-base.dtb kirkwood-openrd-client.dtb kirkwood-openrd-ultimate.dtb This patch adds them to the Makefile to fix the build error. Signed-off-by: Stefan Roese <sr@denx.de> Cc: Chris Packham <judge.packham@gmail.com> Reviewed-by: Chris Packham <judge.packham@gmail.com> Signed-off-by: Stefan Roese <sr@denx.de>
2019-04-25warp7: Switch to DM USBPierre-Jean Texier
This commit switches to DM USB for warp7 and warp7_bl33 defconfigs. Signed-off-by: Pierre-Jean Texier <pjtexier@koncepto.io> Signed-off-by: Joris Offouga <offougajoris@gmail.com> Reviewed-by: Fabio Estevam <festevam@gmail.com>
2019-04-25warp7: Switch to DM SerialPierre-Jean Texier
This commit switches to DM SERIAL for warp7 and warp7_bl33 defconfigs. Signed-off-by: Pierre-Jean Texier <pjtexier@koncepto.io> Signed-off-by: Joris Offouga <offougajoris@gmail.com> Reviewed-by: Fabio Estevam <festevam@gmail.com>
2019-04-25ARM: dts: colibri-imx6ull: update device treeMarcel Ziswiler
Fix compatible node to use regular Toradex notation. Annotate device tree with standard Colibri pin muxing comments. Use open-drain I2C pin muxings. Alphabetically re-order iomuxc nodes. Rename snvs-ad7879-int-grp touch interrupt node as per Linux device tree. Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
2019-04-25ARM: dts: colibri-imx6ull: add osc32k_32k_out pinctrlMarcel Ziswiler
Add GPIO1_IO03__OSC32K_32K_OUT pin muxing. While at it also fix indentation of pinfunc header file. Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
2019-04-25ARM: dts: i.MX6Q: fix avoid_unnecessary_addr_size warningsMarcel Ziswiler
Re-synced the device tree with Linux 5.0. This fixes the following warnings: w+arch/arm/dts/imx6-apalis.dtb: Warning (reg_format): /soc/ipu@2800000/ port@2/endpoint@0:reg: property has invalid length (4 bytes) (#address-cells == 2, #size-cells == 1) w+arch/arm/dts/imx6-apalis.dtb: Warning (reg_format): /soc/ipu@2800000/ port@2/endpoint@1:reg: property has invalid length (4 bytes) (#address-cells == 2, #size-cells == 1) w+arch/arm/dts/imx6-apalis.dtb: Warning (reg_format): /soc/ipu@2800000/ port@2/endpoint@2:reg: property has invalid length (4 bytes) (#address-cells == 2, #size-cells == 1) w+arch/arm/dts/imx6-apalis.dtb: Warning (reg_format): /soc/ipu@2800000/ port@2/endpoint@3:reg: property has invalid length (4 bytes) (#address-cells == 2, #size-cells == 1) w+arch/arm/dts/imx6-apalis.dtb: Warning (reg_format): /soc/ipu@2800000/ port@2/endpoint@4:reg: property has invalid length (4 bytes) (#address-cells == 2, #size-cells == 1) w+arch/arm/dts/imx6-apalis.dtb: Warning (reg_format): /soc/ipu@2800000/ port@3/endpoint@1:reg: property has invalid length (4 bytes) (#address-cells == 2, #size-cells == 1) w+arch/arm/dts/imx6-apalis.dtb: Warning (reg_format): /soc/ipu@2800000/ port@3/endpoint@2:reg: property has invalid length (4 bytes) (#address-cells == 2, #size-cells == 1) w+arch/arm/dts/imx6-apalis.dtb: Warning (reg_format): /soc/ipu@2800000/ port@3/endpoint@3:reg: property has invalid length (4 bytes) (#address-cells == 2, #size-cells == 1) w+arch/arm/dts/imx6-apalis.dtb: Warning (reg_format): /soc/ipu@2800000/ port@3/endpoint@4:reg: property has invalid length (4 bytes) (#address-cells == 2, #size-cells == 1) w+arch/arm/dts/imx6-apalis.dtb: Warning (avoid_default_addr_size): /soc/ipu@2800000/port@2/endpoint@0: Relying on default #address-cells value w+arch/arm/dts/imx6-apalis.dtb: Warning (avoid_default_addr_size): /soc/ipu@2800000/port@2/endpoint@0: Relying on default #size-cells value w+arch/arm/dts/imx6-apalis.dtb: Warning (avoid_default_addr_size): /soc/ipu@2800000/port@2/endpoint@1: Relying on default #address-cells value w+arch/arm/dts/imx6-apalis.dtb: Warning (avoid_default_addr_size): /soc/ipu@2800000/port@2/endpoint@1: Relying on default #size-cells value w+arch/arm/dts/imx6-apalis.dtb: Warning (avoid_default_addr_size): /soc/ipu@2800000/port@2/endpoint@2: Relying on default #address-cells value w+arch/arm/dts/imx6-apalis.dtb: Warning (avoid_default_addr_size): /soc/ipu@2800000/port@2/endpoint@2: Relying on default #size-cells value w+arch/arm/dts/imx6-apalis.dtb: Warning (avoid_default_addr_size): /soc/ipu@2800000/port@2/endpoint@3: Relying on default #address-cells value w+arch/arm/dts/imx6-apalis.dtb: Warning (avoid_default_addr_size): /soc/ipu@2800000/port@2/endpoint@3: Relying on default #size-cells value w+arch/arm/dts/imx6-apalis.dtb: Warning (avoid_default_addr_size): /soc/ipu@2800000/port@2/endpoint@4: Relying on default #address-cells value w+arch/arm/dts/imx6-apalis.dtb: Warning (avoid_default_addr_size): /soc/ipu@2800000/port@2/endpoint@4: Relying on default #size-cells value w+arch/arm/dts/imx6-apalis.dtb: Warning (avoid_default_addr_size): /soc/ipu@2800000/port@3/endpoint@1: Relying on default #address-cells value w+arch/arm/dts/imx6-apalis.dtb: Warning (avoid_default_addr_size): /soc/ipu@2800000/port@3/endpoint@1: Relying on default #size-cells value w+arch/arm/dts/imx6-apalis.dtb: Warning (avoid_default_addr_size): /soc/ipu@2800000/port@3/endpoint@2: Relying on default #address-cells value w+arch/arm/dts/imx6-apalis.dtb: Warning (avoid_default_addr_size): /soc/ipu@2800000/port@3/endpoint@2: Relying on default #size-cells value w+arch/arm/dts/imx6-apalis.dtb: Warning (avoid_default_addr_size): /soc/ipu@2800000/port@3/endpoint@3: Relying on default #address-cells value w+arch/arm/dts/imx6-apalis.dtb: Warning (avoid_default_addr_size): /soc/ipu@2800000/port@3/endpoint@3: Relying on default #size-cells value w+arch/arm/dts/imx6-apalis.dtb: Warning (avoid_default_addr_size): /soc/ipu@2800000/port@3/endpoint@4: Relying on default #address-cells value w+arch/arm/dts/imx6-apalis.dtb: Warning (avoid_default_addr_size): /soc/ipu@2800000/port@3/endpoint@4: Relying on default #size-cells value w+arch/arm/dts/imx6-apalis.dtb: Warning (avoid_unnecessary_addr_size): Failed prerequisite 'avoid_default_addr_size' Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Fabio Estevam <festevam@gmail.com> Reviewed-by: Lukasz Majewski <lukma@denx.de>
2019-04-25imx: Add variscite DART-6UL Evaluation KitParthiban Nallathambi
Port for the DART-6UL Evaluation Kit SBC. Based on the variscite DART-6UL iMX6ULL SoM. CPU: Freescale i.MX6ULL rev1.1 900 MHz (running at 396 MHz) CPU: Commercial temperature grade (0C to 95C) at 43C Reset cause: POR Model: Variscite DART-6UL Evaluation Kit Board: Variscite DART-6UL Evaluation Kit DRAM: 512 MiB MMC: FSL_SDHC: 0, FSL_SDHC: 1 In: serial@02020000 Out: serial@02020000 Err: serial@02020000 Net: FEC0 Working: - Eth0 - i2c - MMC/SD - eMMC - USB host - UART 1 Note: LCDIF porting needs DM_VIDEO https://lists.denx.de/pipermail/u-boot/2019-April/365506.html Signed-off-by: Parthiban Nallathambi <parthitce@gmail.com>
2019-04-25dts: imx6ull: add USB aliases to support DMFilip Brozovic
Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
2019-04-25pico-imx7d: Convert DM MMCJoris Offouga
This patch enable convert DM MMC for imx7d-pico board and variant. Before the DM conversion only usdhc3 was enabled and therefore it appeared as MMC 0 to u-boot. After enabling MMC DM though usdhc3 defaults to MMC 2, which left unattended would drive changes to existing pico-pi bootscripts and environment variables that rely on mmc 0. Setup the alias of mmc0 and usdhc3 so that existing pico-imx7d boot code will work unmodified. When converting to DM_MMC it is necessary that SPL initializes eMMC by itself, so move the original eMMC initialization from U-Boot proper to SPL. Signed-off-by: Joris Offouga <offougajoris@gmail.com> Signed-off-by: Fabio Estevam <festevam@gmail.com>
2019-04-25arm: dts: imx8dx: add lpuart1, lpuart2, lpuart3Marcel Ziswiler
Add support for lpuart1, lpuart2 and lpuart3. Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
2019-04-25Arm: imx7d-pico: Import all Linux device tree for Pico i.MX7D SOMJoris Offouga
This patch imports the Linux kernel base board imx7d-pico.dtsi, pi board imx7d-pico-pi.dts and hobbit board imx7d-pico-hobbit.dts from Linux v5.1-rc1. Signed-off-by: Joris Offouga <offougajoris@gmail.com>
2019-04-25ARM: dts: colibri-imx6ull: fix uart-has-rtscts propertyMarcel Ziswiler
Remove vendor pre-fix fsl, from uart-has-rtscts property. Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
2019-04-25colibri-imx6ull: migrate fec to using driver modelMarcel Ziswiler
Migrate Ethernet FEC to using driver model. Drop PHY_MICREL_KSZ90X1 which slipped in from Apalis iMX6. Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
2019-04-25colibri-imx6ull: migrate usb to using driver modelMarcel Ziswiler
Migrate USB to using driver model. Add USBH_PEN GPIO regulator. While at it also add alias e.g. as required for UMS. Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
2019-04-25colibri-imx6ull: migrate mmc to using driver modelMarcel Ziswiler
Migrate MMC to using driver model. Migrate USDHC to using pinctrl. While at it also add GPIO1_IO03__OSC32K_32K_OUT pin muxing. While at it also update copyright period. Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
2019-04-25colibri_vf: fix ethernet by adding explicit phy nodeMarcel Ziswiler
The implicit fallback mechanism for searching the whole MDIO bus for at least one PHY has been gone with the following commit b882005a18de ("drivers/net/fec: phy_init: remove redundant logic"). This lead to the Ethernet driver erroring out as follows: Net: Could not get PHY for FEC0: addr -19 eth-1: fec@400d1000 Colibri VFxx # dhcp Could not get PHY for FEC0: addr -19 Could not get PHY for FEC0: addr -19 Could not get PHY for FEC0: addr -19 Could not get PHY for FEC0: addr -19 No ethernet found. Could not get PHY for FEC0: addr -19 Colibri VFxx # This commit adds an explicit PHY node which makes it work again. Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Hannes Schmelzer <hannes.schmelzer@br-automation.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
2019-04-25imx: support i.MX8QM MEK boardPeng Fan
Add i.MX8QM MEK board support. Included a basic dts, enabled SPL FIT Boot log as below: U-Boot SPL 2019.01-rc1-00029-gf002213219 (Dec 24 2018 - 10:28:30 +0800) Normal Boot Trying to boot from MMC2_2 U-Boot 2019.01-rc1-00029-gf002213219 (Dec 24 2018 - 10:28:30 +0800) CPU: NXP i.MX8QM RevB A53 at 142933 MHz Model: Freescale i.MX8QM MEK Board: iMX8QM MEK Build: SCFW 9330215b Boot: SD1 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1 Loading Environment from MMC... *** Warning - bad CRC, using default environment In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 Net: Error: ethernet@5b040000 address not set. eth-1: ethernet@5b040000 Hit any key to stop autoboot: 0 Signed-off-by: Peng Fan <peng.fan@nxp.com>
2019-04-25arm: dts: introduce dtsi for i.MX8QMPeng Fan
Introduce basic dtsi for i.MX8QM, only support SDHC/FEC/LPUART. Signed-off-by: Peng Fan <peng.fan@nxp.com>
generated by cgit (git 2.34.1) at 2024-12-26 13:01:35 +0000