summaryrefslogtreecommitdiff
path: root/arch/arm
AgeCommit message (Collapse)Author
2018-06-11LS1012AFRWY: Add Secure Boot supportVinitha V Pillai
Added the following: 1. defconfig for LS1012AFRWY Secure boot 2. PfE Validation support Signed-off-by: Vinitha V Pillai <vinitha.pillai@nxp.com> Reviewed-by: York Sun <york.sun@nxp.com>
2018-06-11board: ls1012a: FRWY-LS1012A board supportBhaskar Upadhaya
FRWY-LS1012A belongs to LS1012A family with features 2 1G SGMII PFE MAC, Micro SD, USB 3.0, DDR, QuadSPI, Audio, UART. Signed-off-by: Bhaskar Upadhaya <Bhaskar.Upadhaya@nxp.com> [yorks: rebase and fix SPDX tag] [yorks: fix board/freescale/ls1012afrdm/Kconfig] Reviewed-by: York Sun <york.sun@nxp.com>
2018-06-08board: Kconfig: Re-Arrangement of PPA firmware and header addressesBhaskar Upadhaya
PPA firmware and header address may vary depending upon different boards, configure ppa firmware and header address in board specific Kconfig. Signed-off-by: Vinitha V Pillai <vinitha.pillai@nxp.com> Signed-off-by: Jagdish Gediya <jagdish.gediya@nxp.com> Signed-off-by: Bhaskar Upadhaya <Bhaskar.Upadhaya@nxp.com> Reviewed-by: York Sun <york.sun@nxp.com>
2018-06-07ARM: orion5x: fix use of callee-saved registers in lowloevel_initMans Rullgard
The lowlevel_init function uses r4 and r6 without preserving their values as required by the AAPCS. Use r0 and r2 instead as these are call-clobbered. Signed-off-by: Mans Rullgard <mans@mansr.com> Reviewed-by: Chris Packham <judge.packham@gmail.com>
2018-06-06Merge branch 'master' of git://git.denx.de/u-boot-samsungTom Rini
2018-06-05mach-stm32: Enable SPL_RESET_SUPPORT flagPatrice Chotard
Since commit 0e373c0ade8c ("spl: add SPL_RESET_SUPPORT"), reset is supported in SPL, enable this flag for STM32F SoCs family. This allows to remove a specific case in RCC mfd driver. Signed-off-by: Patrice Chotard <patrice.chotard@st.com>
2018-06-05ARM: add SBx81LIFKW boardChris Packham
This is a series of line cards for Allied Telesis's SBx8100 chassis switch. The CPU block is common to the SBx81GS24a, SBx81XS6, SBx81XS16 and SBx81GT40 cards collectively referred to as SBx81LIFKW in u-boot. Reviewed-by: Stefan Roese <sr@denx.de> Signed-off-by: Chris Packham <judge.packham@gmail.com> Signed-off-by: Stefan Roese <sr@denx.de>
2018-06-05ARM: kirkwood: remove automatic I2C config if DM_I2C is enabledChris Packham
The mach/config.h file would helpfully define CONFIG_SYS_I2C and CONFIG_SYS_I2C_MVTWSI if CONFIG_CMD_I2C was defined by the board. This conflicts with the way DM_I2C works. As a transitional measure don't automatically define these if CONFIG_DM_I2C is defined. It should be possible to remove this once all kirkwood boards are migrated to DM. Signed-off-by: Chris Packham <judge.packham@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de> Signed-off-by: Stefan Roese <sr@denx.de>
2018-06-05arm: kirkwood: lsxl: Add SPI driver model supportMichael Walle
This patch shows how to enable driver model support for the LS-CHLv2 and LS-XHL boards. There are a couple of open questions: - do I need the u-boot,dm-pre-reloc tags in the device tree? - should mach/config.h define CONFIG_DM_SEQ_ALIAS? - how can we split this patch or are there any other pending patches which does the same and I didn't catch these. This patch is based on the http://git.denx.de/u-boot-marvell.git (master branch) and needs the following patches, which are still pending: https://patchwork.ozlabs.org/patch/909618/ https://patchwork.ozlabs.org/patch/909617/ https://patchwork.ozlabs.org/patch/909973/ Signed-off-by: Michael Walle <michael@walle.cc> Tested-by: Michael Walle <michael@walle.cc> Signed-off-by: Stefan Roese <sr@denx.de>
2018-06-05arm: mvebu: switch clearfog to use device-tree i2c and gpioJon Nettleton
This switches the clearfog boards to use DM based gpio and i2c drivers. The io expanders are configured via their device-tree entries. Signed-off-by: Jon Nettleton <jon@solid-run.com> [baruch: add DT i2c aliases] Signed-off-by: Baruch Siach <baruch@tkos.co.il> Reviewed-by: Chris Packham <judge.packham@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de> Signed-off-by: Stefan Roese <sr@denx.de>
2018-06-05mvebu: a38x: Force receiver detected on PCIe lanesRabeeh Khoury
Some QCA988x based modules presence is not detected by the SERDES lanes, so force this detection which will trigger the LTSSM state machine to negotiate link. An example of such a card is WLE900VX. Signed-off-by: Rabeeh Khoury <rabeeh@solid-run.com> Signed-off-by: Baruch Siach <baruch@tkos.co.il> Tested-by: Chris Packham <judge.packham@gmail.com> Tested-by: Mario Six <mario.six@gdsys.cc> Signed-off-by: Stefan Roese <sr@denx.de>
2018-06-04db410c: Added pre-relocation attribute to pinctrlRamon Fried
u-boot,dm-pre-reloc was missing from pinctrl and it's children node. causing failure to configure pin mux before relocation. Signed-off-by: Ramon Fried <ramon.fried@gmail.com>
2018-06-04Merge branch 'master' of git://git.denx.de/u-boot-sunxiTom Rini
2018-06-04board: sun50i: Add Amarula A64-Relic initial supportJagan Teki
Amarula A64-Relic is A64 based IoT device, which support - Allwinner A64 Cortex-A53 - Mali-400MP2 GPU - AXP803 PMIC - 1GB DDR3 RAM - 8GB eMMC - AP6330 Wifi/BLE - MIPI-DSI - CSI: OV5640 sensor - USB OTG - 12V DC power supply Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> Acked-by: Maxime Ripard <maxime.ripard@bootlin.com>
2018-06-03Define board_quiesce_devices() in a shared locationSimon Glass
This undocumented function relies on arch-specific code to declare a nop weak version. Add the weak function in common code instead to avoid having to duplicate the same function in each arch. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Alexander Graf <agraf@suse.de>
2018-06-03arm: armv7: allow unaligned memory accessHeinrich Schuchardt
The UEFI spec mandates that unaligned memory access should be enabled if supported by the CPU architecture. This patch implements the function unaligned_access() to reset the aligned access flag in the system control register (SCTLR). It is called when the bootefi command is invoked. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de> [agraf: fix SPDX identifier] Signed-off-by: Alexander Graf <agraf@suse.de>
2018-06-02Merge branch 'master' of git://git.denx.de/u-boot-shTom Rini
2018-06-01Merge tag 'xilinx-for-v2018.07-2' of git://www.denx.de/git/u-boot-microblazeTom Rini
Xilinx changes for v2018.07 second pull zynqmp: - Show reset reason - Remove emulation platform - Update pmufw version - Simplify mmc bootmode - Remove dc2 useless configuration file - Cleanup mini config - Defconfig syncup - zcu100, zcu104 and zcu111 dts fixes xilinx: - Use live-tree functions in some drivers - Add support for Avnet Minized and Antminer S9 fpga: - Add secure bitstream loading support mmc: - Add hs200 mode support usb xhci: - Header fix
2018-06-01Merge branch 'master' of git://git.denx.de/u-boot-usbTom Rini
2018-06-01fpga: zynqmp: Add secure bitstream loading for ZynqMPSiva Durga Prasad Paladugu
This patch adds support for loading secure bitstreams on ZynqMP platforms. The secure bitstream images has to be generated using Xilinx bootgen tool. Signed-off-by: Siva Durga Prasad Paladugu <siva.durga.paladugu@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2018-06-01ARM: dts: rmobile: Sync R8A77990 Ebisu DTS with LinuxMarek Vasut
Import the R8A77990 and Ebisu DTS from linux-next to get the latest version. This makes AVB ethernet work in U-Boot since the ethernet node is now present in DT, as well as GPIOs. Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com> Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
2018-06-01ARM: renesas: Add R8A77990 E3 Ebisu boardMarek Vasut
Add support for the R8A77990 Ebisu board. Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com> Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
2018-06-01ARM: dts: rmobile: Add Renesas Ebisu board supportTakeshi Kihara
Basic support for the Renesas Ebisu board based on R-Car E3: - Memory, - Main crystal, - Serial console, Signed-off-by: Takeshi Kihara <takeshi.kihara.df@renesas.com> [shimoda: rebase and add SPDX-License-Identifier] Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com> Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
2018-06-01ARM: dts: rmobile: Add Renesas R8A77990 SoC supportYoshihiro Shimoda
This patch adds basic support for the Renesas R-Car E3 (R8A77990) SoC: - PSCI - CPU (single) - Cache controller - Main clocks and controller - Interrupt controller - Timer - PMU - Reset controller - Product register - System controller - UART for console Inspried by a patch by Takeshi Kihara in the BSP. Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com> Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
2018-06-01ARM: renesas: Add R8A77990 E3 SoC IDMarek Vasut
Add ID and Kconfig entry for the Renesas R8A77990 E3 SoC. Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com> Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
2018-05-31arm64: zynqmp: Add TTC clocksRajan Vaja
PS clock(LPD_APB_CLK) is default clock for TTC. Add this clock entry in TTC nodes. Signed-off-by: Rajan Vaja <rajan.vaja@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2018-05-31arm64: zynqmp: Disable WP on zcu111Michal Simek
On this board there is SD slot without WP connected. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2018-05-31arm64: zynqmp: Remove broken-cd from zcu100-revCMichal Simek
Card detect bit was broken on revA and it is working fine with revC board that's why this property can be removed. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2018-05-31arm64: zynqmp: Fix address for tca6416_u97 chip on zcu104Michal Simek
I2c address is not 0x21 but 0x20. This patch is fixing both revA and revC boards. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2018-05-31arm64: zynqmp: Add ina226 to zcu104 revCMichal Simek
Add new ina226 chip present on i2c bus which wasn't on revA. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2018-05-31arm: zynq: Add support for Bitmain Antminer S9 control boardEzequiel Garcia
This is control board on Bitmain Antminer S9. There are 3 board variables with 256MB, 512MB and 1024MB DDR. DDR memory is automatically detected with using get_with using get_ram_size(). Bitmain is using 16MB space for FPGA which is handled via reserved-memory. Also U-Boot is allocating 16B for storing bootcounts. Watchdog is started but never service in U-Boot. SPL MMC is working. SPL NAND is not working because it is not supported as of now. Signed-off-by: Ezequiel Garcia <ezequiel@vanguardiasur.com.ar> Signed-off-by: Michal Simek <monstr@monstr.eu> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2018-05-31arm: zynq: Add initial support for Avnet MiniZedIbai Erkiaga
Initial support for Avnet MiniZed board. Tested UART1 (serial console), QSPI(Flash), SDHCI1 (eMMC), USB. Signed-off-by: Ibai Erkiaga <ibai.erkiaga-elorza@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2018-05-31soc: zynqmp: Update required API version to 1.0Rajan Vaja
Existing EEMI version is to as 1.0 (available from xilinx v2018.1 version). Update required API version to match with EEMI API version. New PMUFW version is required for operations with programmable logic. Signed-off-by: Rajan Vaja <rajanv@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2018-05-31arm64: zynqmp: Get rid of emulation platformsMichal Simek
ZynqMP emulation platforms are no longer tested and supported that's why remove macros and code around. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2018-05-31arm64: zynqmp: Show reset reasonMichal Simek
Read reset reason reg and show it in log and also save it as variable. Clearing reset reason when it is read to show only one status Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2018-05-30Merge branch 'master' of git://git.denx.de/u-boot-spiTom Rini
- Fix a conflict in drivers/spi/atcspi200_spi.c related to the riscv tree fixing a warning. Signed-off-by: Tom Rini <trini@konsulko.com>
2018-05-30ti: fastboot: Move weak overrides to board filesAlex Kiernan
Overriding fastboot_set_reboot_flag() in arch/arm/mach-omap2/boot-common.c leaves it applying all boards that derive from this, not just the ones which have support for Android bootloader flow. Move the weak function override to the relevant board files. Signed-off-by: Alex Kiernan <alex.kiernan@gmail.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2018-05-30fastboot: Rename fb_set_reboot_flag to fastboot_set_reboot_flagAlex Kiernan
Rename fb_set_reboot_flag to fastboot_set_reboot_flag so it matches all other fastboot code in the global name space. Fix the guards around them so that they're dependent on FASTBOOT, not just USB_FUNCTION_FASTBOOT. Move the weak implementation of fastboot_set_reboot_flag to fb_common.c so we can call it from non-USB fastboot code. Signed-off-by: Alex Kiernan <alex.kiernan@gmail.com> Reviewed-by: Simon Glass <sjg@chromium.org> Acked-by: Joe Hershberger <joe.hershberger@ni.com>
2018-05-30fastboot: Correct dependencies in FASTBOOT_FLASHAlex Kiernan
Ensure that when selecting FASTBOOT_FLASH you end up with a buildable configuration. Prior to this you could select NAND without MTDPARTS and end up with an image which (surprisingly) excluded NAND. Also fix dependencies on FASTBOOT_GPT_NAME/FASTBOOT_MBR_NAME which require you have EFI_PARTITION/DOS_PARTITION enabled. Delete redundant FASTBOOT_FLASH_NAND_DEV from Kconfig - it was only ever used as a guard and the value was ignored in all cases, we're using FASTBOOT_FLASH_NAND as the guard now. Signed-off-by: Alex Kiernan <alex.kiernan@gmail.com> Reviewed-by: Joe Hershberger <joe.hershberger@ni.com>
2018-05-30fastboot: Move fastboot to drivers/fastbootAlex Kiernan
Separate CMD_FASTBOOT from FASTBOOT and move code and configuration to drivers/fastboot. Switch dependencies on FASTBOOT to USB_FUNCTION_FASTBOOT as anyone who wants FASTBOOT before this series wants USB_FUNCTION_FASTBOOT. Split USB_FUNCTION_FASTBOOT from FASTBOOT so they retain their existing behaviour. Signed-off-by: Alex Kiernan <alex.kiernan@gmail.com> Reviewed-by: Simon Glass <sjg@chromium.org> Acked-by: Joe Hershberger <joe.hershberger@ni.com>
2018-05-29Merge git://git.denx.de/u-boot-marvellTom Rini
2018-05-29mach-snapdragon: increase size of malloc poolRamon Fried
Pool size must be increased to support new additionals drivers. Signed-off-by: Ramon Fried <ramon.fried@gmail.com>
2018-05-29db820c: add dummy clock for uart nodeRamon Fried
The missing clock causes serial_msm driver probe to fail. Added a dummy node so the probe succeeds, as the clock init currently in db820c is empty. Fixes: 11d59fe5374a ("serial: serial_msm: fail probe if settings clocks fails") Signed-off-by: Ramon Fried <ramon.fried@gmail.com>
2018-05-29ata: mvebu: move mvebu sata driver to drivers/ata directoryKen Ma
Currently mvebu sata driver is in arch/arm/mach_mvebu directory, this patch moves it to drivers/ata directory with renaming "sata.c" to "ahci_mvebu.c" which is aligned to Linux. New ahci driver's kconfig option is added as AHCI_MVEBU which selects SCSI_AHCI and is based on AHCI. Signed-off-by: Ken Ma <make@marvell.com> Reviewed-by: Stefan Roese <sr@denx.de> Reviewed-by: Simon Glass <sjg@chromium.org> Signed-off-by: Stefan Roese <sr@denx.de>
2018-05-29dts: mvebu: a80x0: Enable SD/eMMC interfacesKonstantin Porotchkin
Enable SDHCI interface on AP and CP0 in A80x0 DTS files Signed-off-by: Konstantin Porotchkin <kostap@marvell.com> Reviewed-by: Stefan Roese <sr@denx.de> Signed-off-by: Evan Wang <xswang@marvell.com> Signed-off-by: Stefan Roese <sr@denx.de>
2018-05-29mvebu: pinctrl: sync compatible string with Linux 4.17-rc4Evan Wang
For pinctrl driver of mvebu, the compatible strings supported are defined differently from Linux version. The patch aligned the compatible string with Linux 4.17-rc4. Signed-off-by: Evan Wang <xswang@marvell.com> Reviewed-by: Stefan Roese <sr@denx.de> Signed-off-by: Stefan Roese <sr@denx.de>
2018-05-29ARM: kirkwood: Add device-tree for keymileChris Packham
Import the dts files from Linux 4.17 and enable CONFIG_OF_CONTROL. Signed-off-by: Chris Packham <judge.packham@gmail.com> Signed-off-by: Stefan Roese <sr@denx.de>
2018-05-29ARM: kirkwood: Add device-tree for netspace & inetspaceChris Packham
Import the dts files from Linux 4.17 and enable CONFIG_OF_CONTROL. Signed-off-by: Chris Packham <judge.packham@gmail.com> Signed-off-by: Stefan Roese <sr@denx.de>
2018-05-29ARM: kirkwood: Add device-tree for lschlv2 & lsxhlChris Packham
Import the dts files from Linux 4.17 and enable CONFIG_OF_CONTROL. Signed-off-by: Chris Packham <judge.packham@gmail.com> Signed-off-by: Stefan Roese <sr@denx.de>
2018-05-29ARM: kirkwood: Add device-tree for ds109Chris Packham
Import the dts files from Linux 4.17 and enable CONFIG_OF_CONTROL. Signed-off-by: Chris Packham <judge.packham@gmail.com> Signed-off-by: Stefan Roese <sr@denx.de>
generated by cgit (git 2.34.1) at 2024-12-28 21:20:05 +0000