uboot-2021-rebase.git - uboot 2021 rebase, to fix booting on modern SD cards, from https://github.com/fifteenhex/u-boot/tree/am335x_som

Age	Commit message (Expand)	Author
2015-08-26	x86: Add DSDT table for supporting ACPI on QEMU	Saket Sinha
2015-08-26	x86: Add ACPI table support to QEMU	Saket Sinha
2015-08-26	x86: baytrail: Remove the fsp_init_phase_pci() call	Bin Meng
2015-08-26	x86: queensbay: Move unprotect_spi_flash() to arch_misc_init()	Bin Meng
2015-08-26	x86: fsp: Add comments about U-Boot entering start.S twice	Bin Meng
2015-08-26	x86: fsp: Enlarge the size of malloc() pool before relocation	Bin Meng
2015-08-26	x86: coreboot: Allow >=4GiB memory bank size	Bin Meng
2015-08-26	x86: Remove calculate_relocation_address()	Bin Meng
2015-08-26	x86: coreboot: Correctly report E820 types	Bin Meng
2015-08-14	x86: Return -1 when reading a PCI config register fails	Simon Glass
2015-08-14	x86: Set APs' req_seq to the reg number from device tree	Bin Meng
2015-08-14	x86: Show the un-relocated IP address in exceptions	Simon Glass
2015-08-14	x86: Switch to using generic global_data setup	Simon Glass
2015-08-14	x86: Move the GDT into global_data	Simon Glass
2015-08-14	x86: baytrail: Support running as an EFI payload	Simon Glass
2015-08-14	x86: baytrail: Tidy up interrupt and FSP init	Simon Glass
2015-08-14	x86: Allow pirq_init() to return an error	Simon Glass
2015-08-14	x86: Tidy up the PIRQ routing code a little	Simon Glass
2015-08-14	x86: baytrail: Configure FSP UPD from device tree	Andrew Bradford
2015-08-06	x86: Enable debug UART for Minnowmax	Simon Glass
2015-08-05	x86: qemu: Support operation as an EFI payload	Simon Glass
2015-08-05	x86: baytrail: Support operation as an EFI payload	Simon Glass
2015-08-05	x86: Handle running as EFI payload	Simon Glass
2015-08-05	x86: Add support for passing tables into U-Boot	Simon Glass
2015-08-05	x86: Add a way to call 32-bit code from 64-bit mode	Simon Glass
2015-08-05	x86: Add relocation and link script for a 64-bit EFI application	Simon Glass
2015-08-05	x86: Add support for U-Boot as an EFI application	Ben Stoltz
2015-08-05	x86: Tidy up a few minor issues with interrupts	Simon Glass
2015-08-05	x86: Add some missing global_data declarations in files that use gd	Simon Glass
2015-08-05	x86: Tidy up the 64-bit calling code	Simon Glass
2015-08-05	x86: Tidy up global_data flags	Simon Glass
2015-08-05	x86: Use CR0 constants in CPU init	Simon Glass
2015-08-05	x86: Add various minor tidy-ups to the 32-bit startup code	Simon Glass
2015-08-05	x86: bayleybay: Configure PCI IRQ	Bin Meng
2015-07-28	x86: qemu: Turn on PCIe ECAM address range decoding on Q35	Bin Meng
2015-07-28	x86: qemu: Enable writing MP table	Bin Meng
2015-07-28	x86: Allow cpu-x86 driver to be probed for UP	Bin Meng
2015-07-28	x86: qemu: Enable I/O APIC chip select on PIIX3	Bin Meng
2015-07-28	x86: Convert to use driver model pci on queensbay/crownbay	Bin Meng
2015-07-28	x86: pci: Do not assign irq 0 to pci device	Bin Meng
2015-07-28	x86: pci: Assign pci irqs to all functions	Bin Meng
2015-07-28	x86: Enable DM RTC support for all x86 boards	Bin Meng
2015-07-28	x86: Change pci option rom area MTRR setting to cacheable	Bin Meng
2015-07-28	x86: Simplify architecture defined exception handling in irq_llsr()	Bin Meng
2015-07-28	x86: Display correct CS/EIP/EFLAGS when there is an error code	Bin Meng
2015-07-27	Kill unneeded #include <linux/kconfig.h>	Masahiro Yamada
2015-07-14	dm: x86: baytrail: Correct PCI region 3 when driver model is used	Simon Glass
2015-07-14	dm: x86: minnowmax: Move PCI to use driver model	Simon Glass
2015-07-14	x86: pci: Tidy up the generic x86 PCI driver	Simon Glass
2015-07-14	x86: queensbay: Change CPU_ADDR_BITS to 32	Bin Meng