summaryrefslogtreecommitdiff
path: root/arch
AgeCommit message (Collapse)Author
2019-01-02rockchip: rk3399-puma: Cleanup of vdd_log DTS entry.Christoph Muellner
This patch eliminates the non-standard entries "rockchip,pwm_id" and "rockchip,pwm_voltage". They are neither documented nor read out by any driver. Additionally it introduces the entry regulator-init-microvolt and sets it to 900 mV, which is the default target value for VDD_LOG. Signed-off-by: Christoph Muellner <christoph.muellner@theobroma-systems.com> Reviewed-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
2019-01-02rockchip: rk3036: ram: update licenseKever Yang
All the source code of sdram_rk3036.c are from Rockchip, update the copyright to owned by Rockchip. Because rockchip may use this copy of code both for open source project and internal project, update the license to use both GPL2.0+ and BSD-3 Clause. Signed-off-by: Kever Yang <kever.yang@rock-chips.com> Reviewed-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
2019-01-02rockchip: sdram-common: fix wrong size for 4GB in 32bit SoCKever Yang
This is workaround for issue we can't get correct size for 4GB ram in 32bit system and available before we really need ram space out of 4GB, eg.enable ARM LAPE(rk3288 supports 8GB ram). The size of 4GB is '0x1 00000000', and this value will be truncated to 0 in 32bit system, and system can not get correct ram size. Rockchip SoCs reserve a blob of space for peripheral near 4GB, and we are now setting SDRAM_MAX_SIZE as max available space for ram in 4GB, so we can use this directly to workaround the issue. Signed-off-by: Kever Yang <kever.yang@rock-chips.com> Tested-By: Vagrant Cascadian <vagrant@debian.org> Reviewed-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com> Reviewed-by: Simon Glass <sjg@chromium.org> Tested-by: Simon Glass <sjg@chromium.org>
2019-01-01Merge tag 'u-boot-imx-20190101' of git://www.denx.de/git/u-boot-imxTom Rini
imx for 2019.01 - introduce support for i.MX8M - fix size limit for Vhybrid / pico boards - several board fixes - w1 driver for MX2x / MX5x
2019-01-01imx8m: ddr: removed unused macrosPeng Fan
Remove unused DDRC register macros. Signed-off-by: Peng Fan <peng.fan@nxp.com>
2019-01-01imx: add i.MX8MQ EVK supportPeng Fan
Add i.MX8MQ EVK support. SPL will initialize ddr and load ddr phy firmware. Then loading FIT image, ATF to OCRAM, U-Boot and DTB to DRAM. The boot log with Arm trusted firmware console enabled: " U-Boot SPL 2018.11-00142-g9ae14e7274 (Nov 20 2018 - 18:13:16 +0800) PMIC: PFUZE100 ID=0x10 Normal Boot Trying to boot from MMC2 NOTICE: Configureing TZASC380 NOTICE: BL31: v1.5(release):p9.0.0_1.0.0-beta-20180928-8-ge09c4b62-dirty NOTICE: BL31: Built : 09:28:54, Nov 8 2018 lpddr4 swffc start NOTICE: sip svc init U-Boot 2018.11-00142-g9ae14e7274 (Nov 20 2018 - 18:13:16 +0800) CPU: Freescale i.MX8MQ rev2.0 at 1000 MHz Reset cause: POR Model: Freescale i.MX8MQ EVK DRAM: 3 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1 In: serial Out: serial Err: serial Net: Warning: ethernet@30be0000 using MAC address from ROM eth0: ethernet@30be0000 Hit any key to stop autoboot: 0 " Signed-off-by: Peng Fan <peng.fan@nxp.com> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Stefano Babic <sbabic@denx.de>
2019-01-01drivers: ddr: introduce DDR driver for i.MX8MPeng Fan
Introduce DDR driver for i.MX8M. The driver will be used by SPL to initialze DDR PHY and DDR Controller. Signed-off-by: Peng Fan <peng.fan@nxp.com>
2019-01-01imx: imx8m: add lpddr4 header filePeng Fan
Introduce lpddr4 header file Signed-off-by: Peng Fan <peng.fan@nxp.com>
2019-01-01imx: imx8m: not build bootaux when building SPLPeng Fan
No need to build bootaux in SPL stage Signed-off-by: Peng Fan <peng.fan@nxp.com>
2019-01-01imx: imx8mq: build flash.binPeng Fan
Build flash.bin for i.MX8MQ, it will include signed hdmi firmware, spl, ddr firmware, fit image(bl31.bin, u-boot-nodtb.bin, dtb). Burn it to 33KB offset of SD card. Signed-off-by: Peng Fan <peng.fan@nxp.com>
2019-01-01imx: imx8m: introduce imximage cfg filePeng Fan
imximage.cfg will be used to generate the flash.bin Signed-off-by: Peng Fan <peng.fan@nxp.com>
2019-01-01imx: imx8m: introduce script to generate fit imagePeng Fan
Introduce script to generate fit image for i.MX8M Signed-off-by: Peng Fan <peng.fan@nxp.com>
2019-01-01imx: imx8m: clock refactor dram pll partPeng Fan
Refactor dram_pll_init to accept args to configure different pll freq. Introduce dram_enable_bypass and dram_disable_bypass Signed-off-by: Peng Fan <peng.fan@nxp.com>
2019-01-01imx: spl: add MMC BOOT Device for i.MX8MPeng Fan
Add MMC BOOT Device for i.MX8M Signed-off-by: Peng Fan <peng.fan@nxp.com>
2019-01-01imx: rename mx8m,MX8M to imx8m,IMX8MPeng Fan
Rename mx8m,MX8M to imx8m,IMX8M Signed-off-by: Peng Fan <peng.fan@nxp.com> Signed-off-by: Jon Nettleton <jon@solid-run.com>
2019-01-01imx: introduce is_imx8mq helperPeng Fan
Introduce is_imx8mq header macro Signed-off-by: Peng Fan <peng.fan@nxp.com>
2019-01-01imx: cpu: add CHIP_REV_2_1 macroPeng Fan
Introduce CHIP_REV_2_1 macro. Signed-off-by: Peng Fan <peng.fan@nxp.com>
2019-01-01arm: imx8qxp: build u-boot-dtb.cfgout before checking filesPeng Fan
Build u-boot-dtb.cfgout before checking files, otherwise u-boot-dtb.cfgout is generated at late stage and cause final image not generated. Signed-off-by: Peng Fan <peng.fan@nxp.com>
2019-01-01imx: hab: extend hab_auth_img to calculate ivt_offsetParthiban Nallathambi
Current implementation of hab_auth_img command needs ivt_offset to authenticate the image. But ivt header is placed at the end of image date after padding. This leaves the usage of hab_auth_img command to fixed size or static offset for ivt header. New function "get_image_ivt_offset" is introduced to find the ivt offset during runtime. The case conditional check in this function is same as boot_get_kernel in common/bootm.c With this variable length image e.g. FIT image with any random size can have IVT at the end and ivt_offset option can be left optional Can be used as "hab_auth_img $loadaddr $filesize" from u-boot script Signed-off-by: Parthiban Nallathambi <pn@denx.de> Reviewed-by: Breno Lima <breno.lima@nxp.com>
2019-01-01ARM: DTS: Provide pinfunc definitions for vybrid vf610 from Linux kernelLukasz Majewski
This file is in sync with v4.20-next tree: e4dda4f5a4df "x86/kaslr, ACPI/NUMA: avoid including asm/kaslr.h on arm64" Signed-off-by: Lukasz Majewski <lukma@denx.de>
2019-01-01ARM: DTS: Add iomux node to vf.dtsi for Vybrid devicesLukasz Majewski
This node is in sync with v4.20-next tree: e4dda4f5a4df "x86/kaslr, ACPI/NUMA: avoid including asm/kaslr.h on arm64" Signed-off-by: Lukasz Majewski <lukma@denx.de>
2019-01-01SPL: Add HAB image authentication to FITYe Li
Introduce two board level callback functions to FIT image loading process, and a SPL_FIT_FOUND flag to differentiate FIT image or RAW image. Implement functions in imx common SPL codes to call HAB funtion to authenticate the FIT image. Generally, we have to sign multiple regions in FIT image: 1. Sign FIT FDT data (configuration) 2. Sign FIT external data (Sub-images) Because the CSF supports to sign multiple memory blocks, so that we can use one signature to cover all regions in FIT image and only authenticate once. The authentication should be done after the entire FIT image is loaded into memory including all sub-images. We use "-p" option to generate FIT image to reserve a space for FIT IVT and FIT CSF, also this help to fix the offset of the external data (u-boot-nodtb.bin, ATF, u-boot DTB). The signed FIT image layout is as below: -------------------------------------------------- | | | | | | | | | FIT | FIT | FIT | | U-BOOT | ATF | U-BOOT | | FDT | IVT | CSF | | nodtb.bin | | DTB | | | | | | | | | -------------------------------------------------- Signed-off-by: Ye Li <ye.li@nxp.com> Reviewed-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Tom Rini <trini@konsulko.com> Signed-off-by: Peng Fan <peng.fan@nxp.com>
2019-01-01imx: bootaux: fix stack and pc assignment on 64-bit platformsGary Bisson
Using ulong is wrong as its size depends on the Host CPU architecture (32-bit vs. 64-bit) although the Cortex-M4 is always 32-bit. Without this patch, the stack and PC are obviously wrong and it generates an abort when used on 64-bit processors such as the i.MX8MQ. Signed-off-by: Gary Bisson <gary.bisson@boundarydevices.com> Reviewed-by: Peng Fan <peng.fan@nxp.com>
2019-01-01imx: mx8m: add memory mapping for CAAM and TCMGary Bisson
Otherwise can't boot the M4 core as it is impossible to load its firmware into the TCM memory. Signed-off-by: Gary Bisson <gary.bisson@boundarydevices.com> Reviewed-by: Peng Fan <peng.fan@nxp.com>
2019-01-01embestmx6boards: Add SPL supportFabien Lahoudere
In order to boot faster with falcon mode, we need to add SPL support to riotboard. Signed-off-by: Fabien Lahoudere <fabien.lahoudere@collabora.com>
2019-01-01watchdog: imx: add config to disable wdog resetXiaoliang Yang
Add Kconfig option WATCHDOG_RESET_DISABLE to disable watchdog reset in imx_watchdog driver, so that the watchdog will not be fed in u-boot if CONFIG_WATCHDOG_RESET_DISABLE is enabled. Signed-off-by: Xiaoliang Yang <xiaoliang.yang_1@nxp.com>
2019-01-01watchdog: driver support for fsl-lsch2Xiaoliang Yang
Support watchdog driver for fsl-lsch2. It's disabled in default. If you want to use it, please enable CONFIG_IMX_WATCHDOG. Define CONFIG_WATCHDOG_TIMEOUT_MSECS to set watchdog timeout. Signed-off-by: Xiaoliang Yang <xiaoliang.yang_1@nxp.com>
2018-12-31riscv: bootm: Support booting VxWorksBin Meng
Register the 'bootm' function for booting VxWorks kernel for RISC-V architecture. Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
2018-12-29ARM: uniphier: dts: sync with Linux 4.20Masahiro Yamada
Currently, the DWC3 USB node is out of sync because the bindings for the UniPhier DWC3 PHY diverged between Linux and U-Boot. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2018-12-29ARM: uniphier: do not modify bootcmd environment variable at run-timeMasahiro Yamada
Some users might want to modify 'bootcmd' at compile-time by editing include/configs/uniphier.h, but overwriting it at run-time makes it impossible. Instead, set 'bootdev' at run-time, which contains the boot device the system is booting from, then indirectly reference it from 'bootcmd'. It is up to users whether to override 'bootcmd'. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2018-12-26mt7629: use linux kernel compatible SMP initializationWeijie Gao
This patch changes mt7629 to use the compatible platform SMP initialization method of linux kernel. Signed-off-by: Weijie Gao <weijie.gao@mediatek.com>
2018-12-26arm: K3: Fix usage of CONFIG_SYS_K3_KEYLokesh Vutla
For signing the tiboot3.bin image, an optional KEY file can be passed using CONFIG_SYS_K3_KEY. Right now, Makefile scripts directly takes the config value and uses it for signing. This is okay if the build directory is a sub-directory of source tree, otherwise it fails. Fix it by using the path relative to the source tree. Reported-by: Jean-Jacques Hiblot <jjhiblot@ti.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
2018-12-26ARM: mach-omap2: omap3: Fix GPIO clocking in SPLAdam Ford
OMAP3_GPIO_x is needed to enable each GPIO bank on the OMAP3 boards. At one point, the #ifdef's were replaced with if CONFIG_IS_ENABLED but this won't work for people who need OMAP3_GPIO_x in SPL since the SPL prefix for this option isn't used in Kconfig. This patch moves the check to #if defined and also makes Kconfig select the banks if CMD_GPIO is used which makes the checks in the code less cumbersome. Fixes: bd8a9c14c91c ("arm: mach-omap2/omap3/clock.c: Enable all GPIO with CMD_GPIO") Reported-by: Liam O'Shaughnessy <liam.o.shaughnessy@gumstix.com> Signed-off-by: Adam Ford <aford173@gmail.com> [trini: Migrate omap3_igep00x0.h] Signed-off-by: Tom Rini <trini@konsulko.com>
2018-12-21Merge git://git.denx.de/u-boot-marvellTom Rini
- Fix breakage in helios4: Change U-Boot offset on SPI Flash - Enable CONFIG_BLK for db-88f6820-amc
2018-12-21Merge branch 'master' of git://git.denx.de/u-boot-socfpgaTom Rini
- stratix10 updates
2018-12-21Merge tag 'u-boot-amlogic-20181219' of git://git.denx.de/u-boot-amlogicTom Rini
A single fix to properly enable eMMC on the AXG S400 board.
2018-12-21Merge tag 'mips-updates-for-2019.11' of git://git.denx.de/u-boot-mipsTom Rini
- mips: fix some DTC warnings - bmips: bcm6348: add DMA driver - bmips: bcm5348: add ethernet driver - bmips: bcm6368: add ethernet driver - mips: mt76xx: fix DMA problems, disable CONFIG_OF_EMBED - mips: mscc: add support for Microsemi Ocelot and Luton SoCs - mips: mscc: add support for Ocelot and Luton evaluation boards - mips: jz47xx: add basic support for Ingenic JZ4780 SoC - mips: jz47xx: add support for Imgtec Creator CI20 board
2018-12-21ARM: mvebu: remove out of date commentChris Packham
The Marvell DDR3 training code is now part of the U-Boot SPL so the comment saying it needs porting is no longer correct. Signed-off-by: Chris Packham <judge.packham@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de> Signed-off-by: Stefan Roese <sr@denx.de>
2018-12-20arm: socfpga: stratix10: Enable Stratix10 FPGA ReconfigurationAng, Chee Hong
Select CONFIG_FPGA_STRATIX10 for CONFIG_TARGET_SOCFPGA_STRATIX10. Signed-off-by: Ang, Chee Hong <chee.hong.ang@intel.com>
2018-12-20arm: socfpga: stratix10: Add Stratix10 FPGA into FPGA device tableAng, Chee Hong
Enable 'fpga' command in u-boot. User will be able to use the FPGA command to program the FPGA on Stratix10 SoC. Signed-off-by: Ang, Chee Hong <chee.hong.ang@intel.com>
2018-12-20arm: socfpga: stratix10: Add macros for mailbox's argumentsAng, Chee Hong
Add macros for specifying number of arguments in mailbox command. Signed-off-by: Ang, Chee Hong <chee.hong.ang@intel.com>
2018-12-20arm: socfpga: stratix10: Add generic FPGA reconfig mailbox API for S10Ang, Chee Hong
Add a generic mailbox API for FPGA reconfig status which can be called by others. This new function accepts 2 different mailbox commands: CONFIG_STATUS or RECONFIG_STATUS. Signed-off-by: Ang, Chee Hong <chee.hong.ang@intel.com>
2018-12-19arm: dts: s400: Fix status for eMMC and SDIO portsNeil Armstrong
Under U-boot, the WiFi SDIO Module should be disabled and the eMMC modules should be enabled, so this patch adds an s400-u-boot.dtsi include file specific for U-Boot that will be included by the build system. Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Tested-by: Jerome Brunet <jbrunet@baylibre.com>
2018-12-19mips: jz47xx: Add Creator CI20 platformPaul Burton
Add support for the Creator CI20 platform based on the JZ4780 SoC. Cc: Daniel Schwierzeck <daniel.schwierzeck@gmail.com> Signed-off-by: Paul Burton <paul.burton@imgtec.com> Signed-off-by: Marek Vasut <marek.vasut@gmail.com> Signed-off-by: Ezequiel Garcia <ezequiel@collabora.com> Reviewed-by: Marek Vasut <marex@denx.de>
2018-12-19mips: jz47xx: Add JZ4780 SoC supportPaul Burton
Add initial support for the Ingenic JZ47xx MIPS SoC. Cc: Daniel Schwierzeck <daniel.schwierzeck@gmail.com> Signed-off-by: Paul Burton <paul.burton@imgtec.com> Signed-off-by: Marek Vasut <marek.vasut@gmail.com> Signed-off-by: Ezequiel Garcia <ezequiel@collabora.com> Reviewed-by: Marek Vasut <marex@denx.de>
2018-12-19mips: Add SPL headerPaul Burton
Add header with SPL boot mode and type definitions. Cc: Daniel Schwierzeck <daniel.schwierzeck@gmail.com> Signed-off-by: Paul Burton <paul.burton@imgtec.com> Signed-off-by: Marek Vasut <marek.vasut@gmail.com>
2018-12-19MSCC: add board support for the Luton based evaluation boardGregory CLEMENT
Adding the support for the Luton boards PCB91 which share common code with the Ocelots boards, including board code, device tree and configuration. Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
2018-12-19MSCC: add board support for the Ocelots based evaluation boardsGregory CLEMENT
Adding the support for 2 boards sharing common code for Ocelot chip: PCB120 and PCB123 Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
2018-12-19MSCC: add support for Luton SoCsGregory CLEMENT
As the Ocelots SoCs, this family of SoCs are found in the Microsemi Switches solution. Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
2018-12-19MSCC: add support for Ocelot SoCsGregory CLEMENT
This family of SoCs are found in the Microsemi Switches solution and have already a support in the linux kernel. Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
generated by cgit (git 2.34.1) at 2025-01-10 02:47:08 +0000