summaryrefslogtreecommitdiff
path: root/arch
AgeCommit message (Collapse)Author
2018-12-26ARM: mach-omap2: omap3: Fix GPIO clocking in SPLAdam Ford
OMAP3_GPIO_x is needed to enable each GPIO bank on the OMAP3 boards. At one point, the #ifdef's were replaced with if CONFIG_IS_ENABLED but this won't work for people who need OMAP3_GPIO_x in SPL since the SPL prefix for this option isn't used in Kconfig. This patch moves the check to #if defined and also makes Kconfig select the banks if CMD_GPIO is used which makes the checks in the code less cumbersome. Fixes: bd8a9c14c91c ("arm: mach-omap2/omap3/clock.c: Enable all GPIO with CMD_GPIO") Reported-by: Liam O'Shaughnessy <liam.o.shaughnessy@gumstix.com> Signed-off-by: Adam Ford <aford173@gmail.com> [trini: Migrate omap3_igep00x0.h] Signed-off-by: Tom Rini <trini@konsulko.com>
2018-12-26exynos: imply SYS_THUMB_BUILDGuillaume GARDET
This patch allows smaller binaries. This is needed for and has been tested on Arndale board, as u-boot.bin is now bigger than the 512K load limit, with GCC8, without thumb mode. Signed-off-by: Guillaume GARDET <guillaume.gardet@free.fr> Cc: Albert Aribaud <albert.u.boot@aribaud.net> Cc: Minkyu Kang <mk7.kang@samsung.com> Cc: Tom Rini <trini@konsulko.com> Acked-by: Lukasz Majewski <lukma@denx.de> Acked-by: Minkyu Kang <mk7.kang@samsung.com> Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
2018-12-21Merge git://git.denx.de/u-boot-marvellTom Rini
- Fix breakage in helios4: Change U-Boot offset on SPI Flash - Enable CONFIG_BLK for db-88f6820-amc
2018-12-21Merge branch 'master' of git://git.denx.de/u-boot-socfpgaTom Rini
- stratix10 updates
2018-12-21Merge tag 'u-boot-amlogic-20181219' of git://git.denx.de/u-boot-amlogicTom Rini
A single fix to properly enable eMMC on the AXG S400 board.
2018-12-21Merge tag 'mips-updates-for-2019.11' of git://git.denx.de/u-boot-mipsTom Rini
- mips: fix some DTC warnings - bmips: bcm6348: add DMA driver - bmips: bcm5348: add ethernet driver - bmips: bcm6368: add ethernet driver - mips: mt76xx: fix DMA problems, disable CONFIG_OF_EMBED - mips: mscc: add support for Microsemi Ocelot and Luton SoCs - mips: mscc: add support for Ocelot and Luton evaluation boards - mips: jz47xx: add basic support for Ingenic JZ4780 SoC - mips: jz47xx: add support for Imgtec Creator CI20 board
2018-12-21ARM: mvebu: remove out of date commentChris Packham
The Marvell DDR3 training code is now part of the U-Boot SPL so the comment saying it needs porting is no longer correct. Signed-off-by: Chris Packham <judge.packham@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de> Signed-off-by: Stefan Roese <sr@denx.de>
2018-12-20arm: socfpga: stratix10: Enable Stratix10 FPGA ReconfigurationAng, Chee Hong
Select CONFIG_FPGA_STRATIX10 for CONFIG_TARGET_SOCFPGA_STRATIX10. Signed-off-by: Ang, Chee Hong <chee.hong.ang@intel.com>
2018-12-20arm: socfpga: stratix10: Add Stratix10 FPGA into FPGA device tableAng, Chee Hong
Enable 'fpga' command in u-boot. User will be able to use the FPGA command to program the FPGA on Stratix10 SoC. Signed-off-by: Ang, Chee Hong <chee.hong.ang@intel.com>
2018-12-20arm: socfpga: stratix10: Add macros for mailbox's argumentsAng, Chee Hong
Add macros for specifying number of arguments in mailbox command. Signed-off-by: Ang, Chee Hong <chee.hong.ang@intel.com>
2018-12-20arm: socfpga: stratix10: Add generic FPGA reconfig mailbox API for S10Ang, Chee Hong
Add a generic mailbox API for FPGA reconfig status which can be called by others. This new function accepts 2 different mailbox commands: CONFIG_STATUS or RECONFIG_STATUS. Signed-off-by: Ang, Chee Hong <chee.hong.ang@intel.com>
2018-12-19arm: dts: s400: Fix status for eMMC and SDIO portsNeil Armstrong
Under U-boot, the WiFi SDIO Module should be disabled and the eMMC modules should be enabled, so this patch adds an s400-u-boot.dtsi include file specific for U-Boot that will be included by the build system. Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Tested-by: Jerome Brunet <jbrunet@baylibre.com>
2018-12-19mips: jz47xx: Add Creator CI20 platformPaul Burton
Add support for the Creator CI20 platform based on the JZ4780 SoC. Cc: Daniel Schwierzeck <daniel.schwierzeck@gmail.com> Signed-off-by: Paul Burton <paul.burton@imgtec.com> Signed-off-by: Marek Vasut <marek.vasut@gmail.com> Signed-off-by: Ezequiel Garcia <ezequiel@collabora.com> Reviewed-by: Marek Vasut <marex@denx.de>
2018-12-19mips: jz47xx: Add JZ4780 SoC supportPaul Burton
Add initial support for the Ingenic JZ47xx MIPS SoC. Cc: Daniel Schwierzeck <daniel.schwierzeck@gmail.com> Signed-off-by: Paul Burton <paul.burton@imgtec.com> Signed-off-by: Marek Vasut <marek.vasut@gmail.com> Signed-off-by: Ezequiel Garcia <ezequiel@collabora.com> Reviewed-by: Marek Vasut <marex@denx.de>
2018-12-19mips: Add SPL headerPaul Burton
Add header with SPL boot mode and type definitions. Cc: Daniel Schwierzeck <daniel.schwierzeck@gmail.com> Signed-off-by: Paul Burton <paul.burton@imgtec.com> Signed-off-by: Marek Vasut <marek.vasut@gmail.com>
2018-12-19MSCC: add board support for the Luton based evaluation boardGregory CLEMENT
Adding the support for the Luton boards PCB91 which share common code with the Ocelots boards, including board code, device tree and configuration. Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
2018-12-19MSCC: add board support for the Ocelots based evaluation boardsGregory CLEMENT
Adding the support for 2 boards sharing common code for Ocelot chip: PCB120 and PCB123 Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
2018-12-19MSCC: add support for Luton SoCsGregory CLEMENT
As the Ocelots SoCs, this family of SoCs are found in the Microsemi Switches solution. Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
2018-12-19MSCC: add support for Ocelot SoCsGregory CLEMENT
This family of SoCs are found in the Microsemi Switches solution and have already a support in the linux kernel. Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
2018-12-19MIPS: Allow to prefetch and lock instructions into cacheGregory CLEMENT
This path add a new helper allowing to prefetch and lock instructions into cache. This is useful very early in the boot when no RAM is available yet. Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
2018-12-19MIPS: move create_tlb() in an proper header: mipsregs.hGregory CLEMENT
Export create_tlb() as an inline function in mipsregs.h. It allows to remove the declaration of the function from the board files. Then it will allow also to use this function very early in the boot when the stack is not usable. Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
2018-12-19MIPS: remove local_irq_[save|restore] from CP0 macrosDaniel Schwierzeck
With moving write_on_tlb() to arch/mips/include/asm/mipsregs.h there are now compiler warnings when some generic code includes asm/io.h. This happens for example when enabling OF live tree. Signed-off-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
2018-12-19mips: mt76xx: Flush d-cache in arch_misc_init() to solve d-cache issuesStefan Roese
It has been noticed, that sometimes the d-cache is not in a "clean-state" when U-Boot is running on MT7688. This was detected when using the ethernet driver (which uses d-cache) and a TFTP command does not complete. Flushing the complete d-cache (again?) here seems to fix this issue. Signed-off-by: Stefan Roese <sr@denx.de> Cc: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
2018-12-19mips: xilfpga: fix DTC warningsDaniel Schwierzeck
This fixes following DTC warning: arch/mips/dts/nexys4ddr.dtb: Warning (compatible_is_string_list): /ethernet@10e00000/mdio/phy@1:compatible: property is not a string list As upstream DTS in Linux doesn't have the offending property, simply remove it to fix the warning. Signed-off-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
2018-12-19mips: ath79: fix DTC warningsDaniel Schwierzeck
Remove all interrupt nodes that cause warnings regarding a missing interrupt parent. There are no interrupt controller nodes defined and the device trees don't match the ones in Linux anymore. Signed-off-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
2018-12-19bmips: enable ar-5315u enet supportÁlvaro Fernández Rojas
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
2018-12-19bmips: bcm6318: add support for bcm6368-enetÁlvaro Fernández Rojas
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
2018-12-19bmips: enable vr-3032u enet supportÁlvaro Fernández Rojas
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
2018-12-19bmips: bcm63268: add support for bcm6368-enetÁlvaro Fernández Rojas
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
2018-12-19bmips: enable dgnd3700v2 enet supportÁlvaro Fernández Rojas
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
2018-12-19bmips: bcm6362: add support for bcm6368-enetÁlvaro Fernández Rojas
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
2018-12-19bmips: enable ar-5387un enet supportÁlvaro Fernández Rojas
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
2018-12-19bmips: bcm6328: add support for bcm6368-enetÁlvaro Fernández Rojas
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
2018-12-19bmips: enable wap-5813n enet supportÁlvaro Fernández Rojas
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
2018-12-19bmips: bcm6368: add support for bcm6368-enetÁlvaro Fernández Rojas
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
2018-12-19bmips: enable nb4-ser enet supportÁlvaro Fernández Rojas
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
2018-12-19bmips: enable hg556a enet supportÁlvaro Fernández Rojas
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
2018-12-19bmips: bcm6358: add support for bcm6348-enetÁlvaro Fernández Rojas
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
2018-12-19bmips: enable ct-5361 enet supportÁlvaro Fernández Rojas
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
2018-12-19bmips: bcm6348: add support for bcm6348-enetÁlvaro Fernández Rojas
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
2018-12-19bmips: enable f@st1704 enet supportÁlvaro Fernández Rojas
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
2018-12-19bmips: bcm6338: add support for bcm6348-enetÁlvaro Fernández Rojas
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
2018-12-19bmips: bcm6318: add bcm6348-iudma supportÁlvaro Fernández Rojas
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
2018-12-19bmips: bcm63268: add bcm6348-iudma supportÁlvaro Fernández Rojas
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
2018-12-19bmips: bcm6362: add bcm6348-iudma supportÁlvaro Fernández Rojas
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
2018-12-19bmips: bcm6328: add bcm6348-iudma supportÁlvaro Fernández Rojas
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
2018-12-19bmips: bcm6368: add bcm6348-iudma supportÁlvaro Fernández Rojas
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
2018-12-19bmips: bcm6358: add bcm6348-iudma supportÁlvaro Fernández Rojas
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
2018-12-19bmips: bcm6348: add bcm6348-iudma supportÁlvaro Fernández Rojas
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
2018-12-19bmips: bcm6338: add bcm6348-iudma supportÁlvaro Fernández Rojas
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
generated by cgit (git 2.34.1) at 2025-01-06 02:03:40 +0000