summaryrefslogtreecommitdiff
path: root/board
AgeCommit message (Collapse)Author
2008-08-12Merge branch 'master' of /home/stefan/git/u-boot/u-boot into nextStefan Roese
2008-08-12Merge branch 'master' of git://www.denx.de/git/u-boot-armWolfgang Denk
2008-08-11i.MX31: Fix mx31_gpio_mux() function and MUX_-macros.Magnus Lilja
Correct the mx31_gpio_mux() function to allow changing all i.MX31 IOMUX contacts instead of only the first 256 ones as is the case prior to this patch. Add missing MUX_* macros and update board files to use the new macros. Signed-off-by: Magnus Lilja <lilja.magnus@gmail.com>
2008-08-11i.MX31: Fix IOMUX related typosMagnus Lilja
Correct the names of some IOMUX macros. Signed-off-by: Magnus Lilja <lilja.magnus@gmail.com>
2008-08-11Merge branch 'master' of /home/stefan/git/u-boot/u-bootStefan Roese
2008-08-10mpc85xx: workaround old binutils bugKumar Gala
The recent change to move the .bss outside of the image gives older binutils (ld from eldk4.1/binutils-2.16) some headache: ppc_85xx-ld: u-boot: Not enough room for program headers (allocated 3, need 4) ppc_85xx-ld: final link failed: Bad value We workaround it by being explicit about the program headers and not assigning the .bss to a program header. Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-08-07ppc4xx: Sequoia has two UARTs in "4-pin" mode. Configure the GPIOs as per ↵Steven A. Falco
schematic. The Sequoia board has two UARTs in "4-pin" mode. This patch modifies the GPIO configuration to match the schematic, and also sets the SDR0_PFC1 register to select the corresponding mode for the UARTs. Signed-off-by: Steven A. Falco <sfalco@harris.com> Signed-off-by: Stefan Roese <sr@denx.de>
2008-08-06Fix merge problemsStefan Roese
Signed-off-by: Stefan Roese <sr@denx.de>
2008-08-05mpc5121: Move iopin features from board specific to common files.Kenneth Johansson
And in the process eliminate some duplicate register defines. Signed-off-by: Kenneth Johansson <kenneth@southpole.se>
2008-08-01Fix compilation error for TASREGTsiChung Liew
TASREG is ColdFire platform, the include ppc4xx.h in board/esd/common/flash.c causes conflict. Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
2008-08-01Fix compilation error for MCF5275TsiChung Liew
Rename OBJ to COBJ in board/platform/Makefile Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
2008-08-01Fix compile error caused by incorrect function return typeTsiChung Liew
Rename int mii_init(void) to void mii_init(void) for idmr ColdFire platform Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
2008-07-31TQM85xx: fix typo introduce by commit ffbb5cb9Wolfgang Denk
Signed-off-by: Wolfgang Denk <wd@denx.de>
2008-07-31mvbc_p board: fix most build warnings.Wolfgang Denk
Signed-off-by: Wolfgang Denk <wd@denx.de>
2008-07-31mpc85xx: Update linker scripts for Freescale boardsKumar Gala
* Move to using absolute addressing always. Makes the scripts a bit more portable and common * Moved .bss after the end of the image. These allows us to have more room in the resulting binary image for code and data. * Removed .text object files that aren't really needed * Make sure _end is 4-byte aligned as the .bss init code expects this. (Its possible that the end of .bss isn't 4-byte aligned) Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-07-31ppc4xx: Fix W7OLMG compile problems by adding missing LM75 definesStefan Roese
Signed-off-by: Stefan Roese <sr@denx.de>
2008-07-31Merge branch 'master' of git://git.denx.de/u-boot-avr32Wolfgang Denk
2008-07-30ppc4xx: ML507: Environment in flash and MTD SupportRicardo Ribalda Delgado
- Relocate the location of U-Boot in the flash - Save the environment in one sector of the flash memory - MTD Support Signed-off-by: Ricardo Ribalda Delgado <ricardo.ribalda@uam.es> Signed-off-by: Stefan Roese <sr@denx.de>
2008-07-30ppc4xx: ML507: Use of get_ram_size in board ml507Ricardo Ribalda Delgado
- Change suggested by WD Signed-off-by: Ricardo Ribalda Delgado <ricardo.ribalda@uam.es> Signed-off-by: Stefan Roese <sr@denx.de>
2008-07-30ppc4xx: ML507: U-Boot in flash and System ACERicardo Ribalda Delgado
This patch allows booting from FLASH the ML507 board by Xilinx. Previously, U-Boot needed to be loaded from JTAG or a Sytem ACE CF Signed-off-by: Ricardo Ribalda Delgado <ricardo.ribalda@uam.es> Signed-off-by: Stefan Roese <sr@denx.de>
2008-07-30Fix remaining CFG_CMD_ define, ifdef and commentsJean-Christophe PLAGNIOL-VILLARD
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
2008-07-30Removed support for the adsvix board.Adrian Filipi
Support for the adsvix was originally provided by Applied Data Systems (ADS), inc., now EuroTech, Inc. The board never shipped aside from some sample boards. Signed-off-by: Adrian Filipi <adrian.filipi@eurotech.com>
2008-07-23avr32: Fix printf() format warningsHaavard Skinnemoen
Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
2008-07-20tqm85xx: Demystify 'DK: !!!' commentDetlev Zundel
Signed-off-by: Detlev Zundel <dzu@denx.de>
2008-07-18ppc4xx: ML507 Board SupportRicardo Ribalda Delgado
The Xilinx ML507 Board is a Virtex 5 prototyping board that includes, among others: -Virtex 5 FX FPGA (With a ppc440x5 in it) -256MB of SDRAM2 -32MB of Flash -I2C Eeprom -System ACE chip -Serial ATA connectors -RS232 Level Conversors -Ethernet Transceiver This patch gives support to a standard design produced by EDK for this board: ppc440, uartlite, xilinx_int and flash - Includes Changes propossed by Stefan Roese and Michal Simek Signed-off-by: Ricardo Ribalda Delgado <ricardo.ribalda@uam.es> Acked-by: Stefan Roese <sr@denx.de>
2008-07-17Merge branch 'master' of /home/stefan/git/u-boot/u-boot into nextStefan Roese
2008-07-15Prepare v1.3.4-rc1: Code cleanup, update CHANGELOG, sort MakefileWolfgang Denk
Signed-off-by: Wolfgang Denk <wd@denx.de>
2008-07-15Merge branch 'master' of git://git.denx.de/u-boot-mpc5xxxWolfgang Denk
2008-07-15Merge branch 'master' of git://git.denx.de/u-boot-mpc86xxWolfgang Denk
2008-07-15Merge branch 'master' of git://git.denx.de/u-boot-mpc85xxWolfgang Denk
2008-07-15mpc5xxx: Add MVBC_P board supportAndre Schwarz
The MVBC_P is a MPC5200B based camera system with Intel Gigabit ethernet controller (using e1000) and custom Altera Cyclone-II FPGA on PCI. Signed-off-by: Andre Schwarz <andre.schwarz@matrix-vision.de> Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2008-07-15Update Freescale sys_eeprom.c to handle CCID formatsTimur Tabi
Update the sys_eeprom.c file to handle both NXID and CCID EEPROM formats. The NXID format replaces the older CCID format, but it's important to support both since most boards out there still use the CCID format. This change is in preparation for using one file to handle both formats. This will also unify EEPROM support for all Freescale 85xx and 86xx boards. Also update the 86xx board header files to use the standard CFG_I2C_EEPROM_ADDR instead of ID_EEPROM_ADDR. Signed-off-by: Timur Tabi <timur@freescale.com>
2008-07-14MPC8544DS: Add ATI Video card supportKumar Gala
Add support for using a PCIe ATI Video card on PCIe2. Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-07-14MPC8544DS: Report board id, board version and fpga version.Kumar Gala
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-07-14sbc8560: add in ft_board_setup()Paul Gortmaker
Add in for the sbc8560, the ft_board_setup() routine, based on what is in use for the Freescale MPC8560ADS board. Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2008-07-14sbc8560: properly set cs0_bnds for 512MBPaul Gortmaker
The sbc8560 board ships with 512MB of memory installed, but the current cs0_bnds is hard coded for 256MB. Set the value based on CFG_SDRAM_SIZE. Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2008-07-14ARM DaVinci: Remove extern phy_t declaration by moving code to proper placeHugo Villeneuve
ARM DaVinci: Remove extern phy_t declaration by moving code to proper place. Signed-off-by: Hugo Villeneuve <hugo.villeneuve@lyrtech.com>
2008-07-14ARM DaVinci: Remove duplicate definitions of MACH_TYPE and prototype of ↵Hugo Villeneuve
i2c_init() ARM DaVinci: Remove duplicate definitions of MACH_TYPE and prototype of i2c_init(). Signed-off-by: Hugo Villeneuve <hugo.villeneuve@lyrtech.com>
2008-07-14Fix coding style; make code better parsable by external toolsWolfgang Denk
Signed-off-by: Wolfgang Denk <wd@denx.de>
2008-07-14elppc board: Coding style cleanup.Wolfgang Denk
Signed-off-by: Wolfgang Denk <wd@denx.de>
2008-07-14elppc board: fix syntax error.Wolfgang Denk
Signed-off-by: Wolfgang Denk <wd@denx.de>
2008-07-14EB+MCF-EV123 board: fix coding style (alingment)Wolfgang Denk
Signed-off-by: Wolfgang Denk <wd@denx.de>
2008-07-14EB+MCF-EV123 board: fix syntx errorWolfgang Denk
Signed-off-by: Wolfgang Denk <wd@denx.de>
2008-07-14Remove LBC_CACHE_BASE from 8544 DSAndy Fleming
The 8544 DS doesn't have any cacheable Local Bus memories set up. By mapping space for some anyway, we were allowing speculative loads into unmapped space, which would cause an exception (annoying, even if ultimately harmless). Removing LBC_CACHE_BASE, and using LBC_NONCACHE_BASE for the LBC LAW solves the problem. Signed-off-by: Andy Fleming <afleming@freescale.com>
2008-07-14Code cleanup: fix old style assignment ambiguities like "=-" etc.Wolfgang Denk
Signed-off-by: Wolfgang Denk <wd@denx.de>
2008-07-14AmigaOneG3SE: remove dead and incomplete filesWolfgang Denk
Signed-off-by: Wolfgang Denk <wd@denx.de>
2008-07-14Merge branch 'master' of /home/stefan/git/u-boot/u-boot into nextStefan Roese
2008-07-13ADS5121: Fix (delete) incorrect ads5121_diu_init() prototypeWolfgang Denk
Signed-off-by: Wolfgang Denk <wd@denx.de>
2008-07-13Fix some more printf() format issues.Jean-Christophe PLAGNIOL-VILLARD
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
2008-07-13ppc4xx: Remove redundant ft_board_setup() functions from some 4xx boardsStefan Roese
This patch removes some ft_board_setup() functions from some 4xx boards. This can be done since we now have a default weak implementation for this in cpu/ppc4xx/fdt.c. Only board in need for a different/custom implementation like canyonlands need their own version. Signed-off-by: Stefan Roese <sr@denx.de>
generated by cgit (git 2.34.1) at 2025-01-15 05:15:32 +0000