uboot-2021-rebase.git - uboot 2021 rebase, to fix booting on modern SD cards, from https://github.com/fifteenhex/u-boot/tree/am335x_som

Age	Commit message (Expand)	Author
2009-03-23	Blackfin: put memory into self-refresh before/after programming clocks	Mike Frysinger
2009-03-23	Blackfin: do not program voltage regulator on parts that do not have one	Mike Frysinger
2009-03-23	Blackfin: setup a sane default EBIU_SDBCTL for SDRAM controllers	Mike Frysinger
2009-03-23	Blackfin: handle reboot anomaly 432	Mike Frysinger
2009-03-23	Blackfin: kill off LDR jump block	Mike Frysinger
2009-03-23	Blackfin: simplify symbol_lookup() a bit	Mike Frysinger
2009-03-23	Blackfin: mark bfin_reset static	Mike Frysinger
2009-03-23	Blackfin: fix jtag console tstc	Mike Frysinger
2009-02-21	Blackfin: disable syscontrol code for now	Mike Frysinger
2009-02-05	Blackfin: dynamically update UART speed when initializing	Mike Frysinger
2009-02-05	Blackfin: add support for fast SPI reads with Boot ROM	Mike Frysinger
2009-02-05	Blackfin: check for reserved settings in DDR MMRs	Mike Frysinger
2009-02-05	Blackfin: set default voltage levels for BF538/BF539 parts	Mike Frysinger
2009-02-05	Blackfin: use on-chip syscontrol() rom function when available	Mike Frysinger
2009-02-02	Blackfin: rewrite cache handling functions	Mike Frysinger
2009-02-02	Blackfin: enable --gc-sections	Mike Frysinger
2009-02-02	Blackfin: dont check baud if it wont actually get used	Mike Frysinger
2009-01-28	Blackfin: fixup misc warnings such as printf's and missing casts	Mike Frysinger
2009-01-28	Blackfin: allow serial console to be disabled	Mike Frysinger
2009-01-28	Blackfin: support console-over-JTAG	Mike Frysinger
2009-01-28	Blackfin: handle new anomalies with reset	Mike Frysinger
2009-01-28	Blackfin: pass RETX to Linux	Mike Frysinger
2009-01-28	Blackfin: clarify relocation comment during init	Mike Frysinger
2009-01-28	Blackfin: just set SP register directly during init	Mike Frysinger
2009-01-28	Blackfin: add portmuxing for UARTs on the BF51x	Mike Frysinger
2009-01-28	Blackfin: respect CONFIG_CLKIN_HALF	Mike Frysinger
2009-01-28	Blackfin: use common memcpy routine during init	Mike Frysinger
2009-01-28	Blackfin: overhaul i2c driver	Mike Frysinger
2009-01-28	Blackfin: fix dcache handling when doing dma memcpy's	Mike Frysinger
2009-01-28	Blackfin: minimize time cache is turned off when replacing cplb entries	Mike Frysinger
2008-12-15	i2c: merge all i2c_reg_read() and i2c_reg_write() into inline functions	Timur Tabi
2008-10-23	Blackfin: fix up UART status bit handling	Mike Frysinger
2008-10-23	Blackfin: small cpu init optimization while setting interrupt mask	Mike Frysinger
2008-10-23	Blackfin: set initial stack correctly according to Blackfin ABI	Mike Frysinger
2008-10-23	Blackfin: make baud calculation more accurate	Mike Frysinger
2008-10-23	Blackfin: decode hwerrcause/excause when crashing	Mike Frysinger
2008-10-23	Blackfin: fix register dump messages	Mike Frysinger
2008-10-23	Blackfin: don't bother displaying reboot msg when crashing	Mike Frysinger
2008-10-23	Blackfin: enable support for nested interrupts	Mike Frysinger
2008-10-23	Blackfin: drop unused cache flush code	Mike Frysinger
2008-10-23	Blackfin: unify cache handling code	Mike Frysinger
2008-10-23	Blackfin: only enable hardware error irq by default	Mike Frysinger
2008-10-18	rename CFG_ macros to CONFIG_SYS	Jean-Christophe PLAGNIOL-VILLARD
2008-05-21	Big white-space cleanup.	Wolfgang Denk
2008-03-30	Blackfin: unify cpu and boot modes	Mike Frysinger