summaryrefslogtreecommitdiff
path: root/doc
AgeCommit message (Collapse)Author
2017-07-12mmc: fsl_esdhc: drop CONFIG_SYS_FSL_ESDHC_FORCE_VSELECTPeng Fan
CONFIG_SYS_FSL_ESDHC_FORCE_VSELECT is not the correct method to set I/O to 1.8. To boards that does not support vqmmc-supply, use vs18_enable in fsl_esdhc_cfg. If regulator is supported, use fixed 1.8V regulator for vqmmc-supply. Signed-off-by: Peng Fan <peng.fan@nxp.com> Cc: Jaehoon Chung <jh80.chung@samsung.com> Cc: York Sun <york.sun@nxp.com> Cc: Stefano Babic <sbabic@denx.de>
2017-07-12arm64: mvebu: use single defconfig for Armada8K development boardsIgal Liberman
Currently, Marvell Armada8k development board use 3 different defconfigs: mvebu_db-88f7040-nand_defconfig mvebu_db-88f7040_defconfig mvebu_db-88f8040_defconfig Having 3 different defconfigs makes maintenance difficult. This patch removes the defconfigs mentioned above and introduce a new defconfig which represents the Armada8k family. NOTE: In order not to break automatic tools compilation, a default device-tree is set in the defconfig (armada-8040-db). However, when compiling u-boot, the user MUST explicitly export the DEVICE_TREE for the requested board because using A80x0 device-tree on A70x0 might break the device. For more information, refer to "doc/README.marvell" (intoduced in this patch). Change-Id: I98515b6306498358f3722ecf7ac4c87f236ebbd8 Signed-off-by: Igal Liberman <igall@marvell.com> Signed-off-by: Stefan Roese <sr@denx.de>
2017-07-11Merge git://git.denx.de/u-boot-dmTom Rini
2017-07-11dtoc: Support multiple compatible strings in a nodeSimon Glass
Sometimes a node will have multiple compatible strings. Drivers may use one or the other so the best approach seems to be to #define them to be equivalent. Update dtoc to support this. Signed-off-by: Simon Glass <sjg@chromium.org> Tested-by: Kever Yang <kever.yang@rock-chips.com>
2017-07-11cmd gpt: test in sandboxAlison Chaiken
Make minor changes to README.gpt and sandbox_defconfig to support testing of the gpt command's functionality in the sandbox. Signed-off-by: Alison Chaiken <alison@peloton-tech.com>
2017-07-11doc: rockchip: Add phyCORE-RK3288 RDK to board listWadim Egorov
Signed-off-by: Wadim Egorov <w.egorov@phytec.de> Acked-by: Simon Glass <sjg@chromium.org> Reviewed-by: Simon Glass <sjg@chromium.org> Acked-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com> Reviewed-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
2017-07-06avr32: Retire AVR32 for goodAndy Shevchenko
AVR32 is gone. It's already more than two years for no support in Buildroot, even longer there is no support in GCC (last version is heavily patched 4.2.4). Linux kernel v4.12 got rid of it (and v4.11 didn't build successfully). There is no good point to keep this support in U-Boot either. Reviewed-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com> Reviewed-by: Heiko Schocher <hs@denx.de> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
2017-07-03powerpc: remove 4xx supportHeiko Schocher
There was for long time no activity in the 4xx area. We need to go further and convert to Kconfig, but it turned out, nobody is interested anymore in 4xx, so remove it. Signed-off-by: Heiko Schocher <hs@denx.de>
2017-06-29doc: restore doc/README.fsl-clkChristophe Leroy
doc/README.fsl-clk was removed in commit 5b8e76c35ec31 ("powerpc, 8xx: remove support for 8xx") allthought CONFIG_SYS_FSL_CLK is defined in arch/arm/cpu/armv8/fsl-layerscape/Kconfig and still in use in the following configs: ./include/configs/mx53loco.h:21:#define CONFIG_SYS_FSL_CLK ./include/configs/m53evk.h:16:#define CONFIG_SYS_FSL_CLK ./include/configs/mx25pdk.h:17:#define CONFIG_SYS_FSL_CLK ./include/configs/usbarmory.h:14:#define CONFIG_SYS_FSL_CLK ./include/configs/ls1021aqds.h:14:#define CONFIG_SYS_FSL_CLK ./include/configs/mx53cx9020.h:22:#define CONFIG_SYS_FSL_CLK ./include/configs/colibri_vf.h:17:#define CONFIG_SYS_FSL_CLK ./include/configs/mx35pdk.h:21:#define CONFIG_SYS_FSL_CLK ./include/configs/woodburn_common.h:19:#define CONFIG_SYS_FSL_CLK ./include/configs/mx7_common.h:25:#define CONFIG_SYS_FSL_CLK ./include/configs/ls1021aiot.h:12:#define CONFIG_SYS_FSL_CLK ./include/configs/ls1021atwr.h:14:#define CONFIG_SYS_FSL_CLK ./include/configs/mx53ard.h:21:#define CONFIG_SYS_FSL_CLK ./include/configs/mx53smd.h:21:#define CONFIG_SYS_FSL_CLK ./include/configs/mx51evk.h:16:#define CONFIG_SYS_FSL_CLK ./include/configs/mx6_common.h:31:#define CONFIG_SYS_FSL_CLK ./include/configs/vf610twr.h:14:#define CONFIG_SYS_FSL_CLK ./include/configs/mx53evk.h:21:#define CONFIG_SYS_FSL_CLK Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr> Reviewed-by: Heiko Schocher <hs@denx.de>
2017-06-23MAINTAINERS, git-mailrc: update the maintainer for rockchipPhilipp Tomsich
Adding myself to MAINTAINERS and git-mailrc for the rockchip sub-architecture. Signed-off-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com> Acked-by: Simon Glass <sjg@chromium.org>
2017-06-16powerpc, 5xxx, 512x: remove support for mpc5xxx and mpc512xHeiko Schocher
There was for long time no activity in the mpx5xxx area. We need to go further and convert to Kconfig, but it turned out, nobody is interested anymore in mpc5xxx, so remove it. Signed-off-by: Heiko Schocher <hs@denx.de>
2017-06-14Merge git://git.denx.de/u-boot-mpc85xxTom Rini
2017-06-12powerpc: mpc8540ads: mpc8560ads: Drop support for MPC8540/60ADSYork Sun
Drop support for these two legacy boards. Signed-off-by: York Sun <york.sun@nxp.com>
2017-06-12powerpc, 5xx: remove support for 5xxHeiko Schocher
There was for long time no activity in the 5xx area. We need to go further and convert to Kconfig, but it turned out, nobody is interested anymore in 5xx, so remove it. Signed-off-by: Heiko Schocher <hs@denx.de>
2017-06-12powerpc, 8260: remove support for mpc8260Heiko Schocher
There was for long time no activity in the 8260 area. We need to go further and convert to Kconfig, but it turned out, nobody is interested anymore in 8260, so remove it. Signed-off-by: Heiko Schocher <hs@denx.de>
2017-06-12powerpc, 8xx: remove support for 8xxHeiko Schocher
There was for long time no activity in the 8xx area. We need to go further and convert to Kconfig, but it turned out, nobody is interested anymore in 8xx, so remove it (with a heavy heart, knowing that I remove here the root of U-Boot). Signed-off-by: Heiko Schocher <hs@denx.de>
2017-06-09README: Add instructions for chain-loading U-Boot on jerrySimon Glass
Add instructions for chromebook_jerry. Signed-off-by: Simon Glass <sjg@chromium.org>
2017-06-09rockchip: jerry: Add a .its file for chromiumSimon Glass
Add a sample .its file for booting U-Boot on a jerry Chromebook. Signed-off-by: Simon Glass <sjg@chromium.org>
2017-06-09README: Add instructions for chain-loading U-BootSimon Glass
Most Chromebooks support chain-loading U-Boot but instructions are somewhat scattered. Add a README to hold this information within the U-Boot tree. Also add the standard developer keys to simplify the instructions, since they are small. For now this only supports nyan-big. Signed-off-by: Simon Glass <sjg@chromium.org>
2017-06-09tegra: nyan-big: Add a .its file for chromiumSimon Glass
Add a sample .its file for booting U-Boot on a nyan-big Chromebook. Signed-off-by: Simon Glass <sjg@chromium.org>
2017-06-07MAINTAINERS: git-mailrc: update maintainer for RockchipKever Yang
Send patch to Kever Yang instead of Lin Huang for Rockchip patches, for Lin is not always working on upstream U-Boot. Signed-off-by: Kever Yang <kever.yang@rock-chips.com> Reviewed-by: Simon Glass <sjg@chromium.org> Changed , to : in subject: Signed-off-by: Simon Glass <sjg@chromium.org>
2017-06-05x86: baytrail: Change lpe/lpss-sio/scc FSP properties to integerBin Meng
At present lpe/lpss-sio/scc FSP properties are all boolean, but in fact for "enable-lpe" it has 3 possible options. This adds macros for these options and change the property from a boolean type to an integer type, and change their names to explicitly indicate what the property is really for. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de> Reviewed-by: Simon Glass <sjg@chromium.org>
2017-06-05x86: baytrail: Use macros instead of magic numbers for FSP settingsBin Meng
Introduce various meaningful macros for FSP settings and switch over to use them instead of magic numbers. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de> Reviewed-by: Simon Glass <sjg@chromium.org>
2017-06-05x86: baytrail: Remove "serial-debug-port-*" settingsBin Meng
"serial-debug-port-address" and "serial-debug-port-type" settings are actually reserved in the FSP UPD data structure. Remove them. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de> Reviewed-by: Simon Glass <sjg@chromium.org>
2017-05-29doc: document u-boot, mmc-env-offset and u-boot, mmc-env-offset-redundPhilipp Tomsich
Adding documentation on the new config properties: 'u-boot,mmc-env-offset' - overrides CONFIG_ENV_OFFSET 'u-boot,mmc-env-offset-redundant' - overrides CONFIG_ENV_OFFSET_REDUND Signed-off-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com> Reviewed-by: Jaehoon Chung <jh80.chung@samsung.com>
2017-05-22Merge git://git.denx.de/u-boot-sunxiTom Rini
trini: Make Kconfig SPL_xxx entires only show if SPL, so that we don't get Kconfig errors on platforms without SPL, ie sandbox (without SPL). Signed-off-by: Tom Rini <trini@konsulko.com>
2017-05-22fs: Kconfig: Add a separate option for FS_JFFS2Simon Glass
Rather than using CMD_JFFS2 for both the filesystem and its command, we should have a separate option for each. This allows us to enable JFFS2 support without the command, if desired, which reduces U-Boot's size slightly. Signed-off-by: Simon Glass <sjg@chromium.org>
2017-05-17SPL: FIT: allow loading multiple imagesAndre Przywara
So far we were not using the FIT image format to its full potential: The SPL FIT loader was just loading the first image from the /images node plus one of the listed DTBs. Now with the refactored loader code it's easy to load an arbitrary number of images in addition to the two mentioned above. As described in the FIT image source file format description, iterate over all images listed at the "loadables" property in the configuration node and load every image at its desired location. This allows to load any kind of images: - firmware images to execute before U-Boot proper (for instance ARM Trusted Firmware (ATF)) - firmware images for management processors (SCP, arisc, ...) - firmware images for devices like WiFi controllers - bit files for FPGAs - additional configuration data - kernels and/or ramdisks The actual usage of this feature would be platform and/or board specific. Also update the FIT documentation to mention the new SPL feature and provide an example .its file to demonstrate its features. Signed-off-by: Andre Przywara <andre.przywara@arm.com> Reviewed-by: Lokesh Vutla <lokeshvuta@ti.com> Reviewed-by: Simon Glass <sjg@chromium.org> Tested-by: Heiko Stuebner <heiko@sntech.de> Reviewed-by: Kever Yang <kever.yang@rock-chips.com> Tested-by: Kever Yang <kever.yang@rock-chips.com> Tested-by: Jagan Teki <jagan@openedev.com> Reviewed-by: Jagan Teki <jagan@openedev.com>
2017-05-17x86: Document ACPI S3 supportBin Meng
Now that we have ACPI S3 support on Intel MinnowMax board, document some generic information of S3 and how to test it. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Simon Glass <sjg@chromium.org> Tested-by: Stefan Roese <sr@denx.de>
2017-05-15omap5: Migrate CONFIG_OMAP_PLATFORM_RESET_TIME_MAX_USEC to KconfigTom Rini
While in theory this value could be used in places outside of "omap5" (such as OMAP4), we only make use of it today in OMAP5, so place the Kconfig entry there. Given that Kconfig lets us provide a default, we drop CONFIG_DEFAULT_OMAP_RESET_TIME_MAX_USEC entirely. The contents of doc/README.omap-reset-time make a good help entry, so adjust them slightly and delete the file. Move the comment about range to where we use the value now, and have Kconfig enforce the upper bound. Signed-off-by: Tom Rini <trini@konsulko.com>
2017-05-11doc: document /config/u-boot, spl-payload-offset propertyPhilipp Tomsich
This adds documentation on the u-boot,spl-payload-offset property (which overrides CONFIG_SYS_SPI_U_BOOT_OFFS during the SPI loading in the SPL stage, if present). Signed-off-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com> Acked-by: Simon Glass <sjg@chromium.org>
2017-05-10Merge git://git.denx.de/u-boot-rockchipTom Rini
This adds a new firefly-rk3399 board, MIPI support for rk3399 and rk3288, rk818 pmic support, mkimage improvements for rockchip and a few other things.
2017-05-10Merge branch 'master' of git://git.denx.de/u-boot-mipsTom Rini
2017-05-10doc: dtbinding: add pwm binding fileKever Yang
This is a copy from kernel. Signed-off-by: Kever Yang <kever.yang@rock-chips.com> Acked-by: Simon Glass <sjg@chromium.org>
2017-05-10dm: led: add BCM6358 led driverÁlvaro Fernández Rojas
This driver is a simplified version of linux/drivers/leds/leds-bcm6358.c Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2017-05-10dm: led: add BCM6328 led driverÁlvaro Fernández Rojas
This driver is a simplified version of linux/drivers/leds/leds-bcm6328.c, simplified to remove HW leds and blink fallbacks. Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2017-05-09Allow boards to initialize the DT at runtime.Alex Deymo
In some boards like the Raspberry Pi the initial bootloader will pass a DT to the kernel. When using U-Boot as such kernel, the board code in U-Boot should be able to provide U-Boot with this, already assembled device tree blob. This patch introduces a new config option CONFIG_OF_BOARD to use instead of CONFIG_OF_EMBED or CONFIG_OF_SEPARATE which will initialize the DT from a board-specific funtion instead of bundling one with U-Boot or as a separated file. This allows boards like the Raspberry Pi to reuse the device tree passed from the bootcode.bin and start.elf firmware files, including the run-time selected device tree overlays. Signed-off-by: Alex Deymo <deymo@google.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2017-05-08ARM: DT: stm32f7: add sdram pin contol nodeVikas Manocha
Also added DT binding doc for stm32 fmc(flexible memory controller). Signed-off-by: Vikas Manocha <vikas.manocha@st.com> cc: Christophe KERELLO <christophe.kerello@st.com>
2017-04-14Merge branch 'master' of git://git.denx.de/u-boot-videoTom Rini
2017-04-14at91: video: DT binding for HLCDC driverSongjun Wu
DT binding documentation for atmel HLCDC driver. Signed-off-by: Songjun Wu <songjun.wu@microchip.com>
2017-04-14Merge branch 'master' of git://git.denx.de/u-boot-socfpgaTom Rini
2017-04-14ARM: socfpga: add fpga build and bsp handoff instructions to readmeStephen Arnold
This patch adds the steps to manually (re)build a Quartus FPGA project, generate the required BSP glue, and update u-boot handoff files for mainline SPL support. Requires Quartus toolchain and current U-Boot. Signed-off-by: Steve Arnold <stephen.arnold42@gmail.com> Cc: Dinh Nguyen <dinguyen@kernel.org> Cc: Stefan Roese <sr@denx.de> Cc: Marek Vasut <marex@denx.de>
2017-04-13Merge branch 'master' of git://www.denx.de/git/u-boot-imxTom Rini
Drop CONFIG_STACKSIZE from include/configs/imx6_logic.h Signed-off-by: Tom Rini <trini@konsulko.com>
2017-04-13board_f: Rename initdram() to dram_init()Simon Glass
This allows us to use the same DRAM init function on all archs. Add a dummy function for arc, which does not use DRAM init here. Signed-off-by: Simon Glass <sjg@chromium.org> [trini: Dummy function on nios2] Signed-off-by: Tom Rini <trini@konsulko.com>
2017-04-08doc: Updates info on using Keystone2 secure devicesMadan Srinivas
Add a section describing the secure boot image used on Keystone2 secure devices. Signed-off-by: Madan Srinivas <madans@ti.com> Signed-off-by: Andrew F. Davis <afd@ti.com> Reviewed-by: Tom Rini <trini@konsulko.com> Reviewed-by: Lokesh Vutla <lokeshvutla@ti.com>
2017-04-05ARM: mxs: Rename M28EVKMarek Vasut
The board is now manufactured by Aries Embedded GmbH , rename it. Signed-off-by: Marek Vasut <marex@denx.de>
2017-04-04rockchip: Add support for MiQi rk3288 boardJernej Skrabec
MiQi is rk3288 based development board with 1 or 2 GB SDRAM, 16 GB eMMC, micro SD card interface, 4 USB 2.0 ports, HDMI, gigabit Ethernet and expansion ports. Signed-off-by: Jernej Skrabec <jernej.skrabec@siol.net> Reviewed-by: Kever Yang <kever.yang@rock-chips.com> Reviewed-by: Eddie Cai <eddie.cai.linux@gmail.com> Acked-by: Simon Glass <sjg@chromium.org>
2017-04-04rockchip: cosmetic: Sort RK3288 boardsJernej Skrabec
Sort rk3288 boards in alphabetical order. Signed-off-by: Jernej Skrabec <jernej.skrabec@siol.net> Reviewed-by: Kever Yang <kever.yang@rock-chips.com> Reviewed-by: Eddie Cai <eddie.cai.linux@gmail.com> Acked-by: Simon Glass <sjg@chromium.org>
2017-04-04rockchip: rk3399: spl: make SPL boot-order configurable via /chosenPhilipp Tomsich
The RK3399 does not have any boot selection pins and the BootROM probes the boot interfaces using the following boot-order: 1. SPI 2. eMMC (sdhci in DTS) 3. SD card (sdmmc in DTS) 4. USB loader For ease of deployment, the SPL stage should mirror the boot order of the ROM and use the same probing order (assuming that valid images can be detected by SPL) unless instructed otherwise. The boot-order can then be configured via the 'u-boot,spl-boot-order' property in the chosen-node of the DTS. While this approach is easily extensible to other boards, it is only implemented for the RK3399 for now, as the large SRAM on the RK3399 makes this easy to fit the needed infrastructure into SPL and our production setup already runs with DM, OF_CONTROL and BLK in SPL. The new boot-order property is expected to be used in conjunction with FIT images (and all legacy image formats disabled via Kconfig). A boot-sequence with probing and fallthroughs from SPI via eMMC to SD card (i.e. &spiflash, &sdhci, &sdmmc) has been validated on the RK3399-Q7. Signed-off-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com> Tested-by: Klaus Goger <klaus.goger@theobroma-systems.com> Tested-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com> Acked-by: Simon Glass <sjg@chromium.org>
2017-04-04rockchip: rk3188: add README.rockchip paragraph describing sd bootHeiko Stübner
Building sd images for rk3188 requires more steps due to the needed split into TPL and SPL as loaders. Describe how to build an image for it in a separate paragraph in the READER.rockchip file. Signed-off-by: Heiko Stuebner <heiko@sntech.de> Reviewed-by: Kever Yang <kever.yang@rock-chips.com>