summaryrefslogtreecommitdiff
path: root/drivers/clk
AgeCommit message (Collapse)Author
2020-07-01clk: Fix clk_get_by_* handling of indexSean Anderson
clk_get_by_index_nodev only ever fetched clock 1, due to passing a boolean predicate instead of the index. Other clk_get_by_* functions got the clock correctly, but passed a predicate instead of the index to clk_get_by_tail. This could lead to confusing error messages. Signed-off-by: Sean Anderson <seanga2@gmail.com> CC: Lukasz Majewski <lukma@denx.de>
2020-07-01clk: Check that ops of composite clock components exist before callingSean Anderson
clk_composite_ops was shared between all devices in the composite clock driver. If one clock had a feature (such as supporting set_parent) which another clock did not, it could call a null pointer dereference. This patch does three things 1. It adds null-pointer checks to all composite clock functions. 2. It makes clk_composite_ops const and sets its functions at compile-time. 3. It adds some basic sanity checks to num_parents. The combined effect of these changes is that any of mux, rate, or gate can be NULL, and composite clocks will still function normally. Previously, at least mux had to exist, since clk_composite_get_parent was used to determine the parent for clk_register. Signed-off-by: Sean Anderson <seanga2@gmail.com> Acked-by: Lukasz Majewski <lukma@denx.de>
2020-07-01clk: Always use the supplied struct clkSean Anderson
CCF clocks should always use the struct clock passed to their methods for extracting the driver-specific clock information struct. Previously, many functions would use the clk->dev->priv if the device was bound. This could cause problems with composite clocks. The individual clocks in a composite clock did not have the ->dev field filled in. This was fine, because the device-specific clock information would be used. However, since there was no ->dev, there was no way to get the parent clock. This caused the recalc_rate method of the CCF divider clock to fail. One option would be to use the clk->priv field to get the composite clock and from there get the appropriate parent device. However, this would tie the implementation to the composite clock. In general, different devices should not rely on the contents of ->priv from another device. The simple solution to this problem is to just always use the supplied struct clock. The composite clock now fills in the ->dev pointer of its child clocks. This allows child clocks to make calls like clk_get_parent() without issue. imx avoided the above problem by using a custom get_rate function with composite clocks. Signed-off-by: Sean Anderson <seanga2@gmail.com> Acked-by: Lukasz Majewski <lukma@denx.de>
2020-06-30Merge tag 'mips-pull-2020-06-29' of ↵Tom Rini
https://gitlab.denx.de/u-boot/custodians/u-boot-mips into next - net: pcnet: cleanup and add DM support - Makefile: add rule to build an endian-swapped U-Boot image used by MIPS Malta EL variants - CI: add Qemu tests for MIPS Malta
2020-06-27rockchip: clk: rk3188: change APLL to safe 600MHzAlexander Kochetkov
The commit 84a6a27ae3ff ("rockchip: rk3188: init CPU freq in clock driver") changed ARM clock from 600MHz to 1600MHz. It made boot unstable due to the fact that PMIC at the start generates insufficient voltage for operation. See also: commit f4f57c58b589 ("rockchip: rk3188: Setup the armclk in spl"). Fixes commit 84a6a27ae3ff ("rockchip: rk3188: init CPU freq in clock driver"). Signed-off-by: Alexander Kochetkov <al.kochet@gmail.com> Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2020-06-24clk: versal: Remove alt_ref_clk from clock sourcesRajan Vaja
alt_ref_clk is applicable only for PS extended version. For PS base version there is no separate alt_ref_clk. It is tied with ref_clk, so remove it from driver. Signed-off-by: Rajan Vaja <rajan.vaja@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2020-06-04clk: sifive: fu540-prci: Release ethernet clock resetPragnesh Patel
U-Boot ethernet works with FSBL flow where releasing ethernet clock reset is part of FSBL itself but with the SPL, We need to release ethernet clock reset explicitly for U-Boot proper. With this change Release ethernet clock reset code in FSBL might not be needed or unaffected. Signed-off-by: Pragnesh Patel <pragnesh.patel@sifive.com> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Tested-by: Bin Meng <bmeng.cn@gmail.com>
2020-06-04clk: sifive: fu540-prci: Add ddr clock initializationPragnesh Patel
Release ddr clock reset once clock is initialized Signed-off-by: Pragnesh Patel <pragnesh.patel@sifive.com> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Tested-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Jagan Teki <jagan@amarulasolutions.com> Tested-by: Jagan Teki <jagan@amarulasolutions.com>
2020-06-04clk: sifive: fu540-prci: Add clock enable and disable opsPragnesh Patel
Added clock enable and disable functions in prci ops Signed-off-by: Pragnesh Patel <pragnesh.patel@sifive.com> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Tested-by: Bin Meng <bmeng.cn@gmail.com> Acked-by: Jagan Teki <jagan@amarulasolutions.com> Tested-by: Jagan Teki <jagan@amarulasolutions.com>
2020-05-29clk: rk3399: Enable/Disable TCPHY clocksJagan Teki
Enable/Disable TCPHY clock for rk3399 platform. Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2020-05-29clk: rk3399: Set empty for TCPHY assigned-clocksJagan Teki
Due to v5.7-rc1 sync the SD controller nodes in rk3399.dtsi have SCLK_UPHY0_TCPDCORE, SCLK_UPHY1_TCPDCORE assigned-clocks which are usually required for Linux and don't require to handle them in U-Boot. assigned-clocks = <&cru SCLK_UPHY0_TCPDCORE>; assigned-clocks = <&cru SCLK_UPHY1_TCPDCORE>; So, mark them as empty in clock otherwise device probe on those typec phy driver would fail. Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2020-05-29clk: rk3399: Enable/Disable the USB2PHY clkJagan Teki
Enable/Disable the USB2PHY clk for rk3399. CLK is clear in enable and set in disable functionality. Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2020-05-29clk: rk3399: Fix eMMC get_clk reg offsetJagan Teki
Actual eMMC get_clk register is clksel_con22 instead of clksel_con21. Fix it. Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2020-05-22clk: rk3399: Enable/Disable the PCIEPHY clkJagan Teki
Enable/Disable the PCIEPHY clk for rk3399. CLK is clear in both enable and disable functionality. Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> Tested-by: Suniel Mahesh <sunil@amarulasolutions.com> #roc-rk3399-pc Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2020-05-22clk: rk3399: Add enable/disable clksJagan Teki
Yes, most of the high speed peripheral clocks in rk3399 enabled by default. But it would be better to handle them via clk enable/disable API for handling proper reset conditions like 'usb reset' over command line. So, enable USB, GMAC clock via enable/disable ops. Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> Tested-by: Suniel Mahesh <sunil.m@amarulasolutions.com> # roc-rk3399-pc Tested-by: Suniel Mahesh <sunil@amarulasolutions.com> #roc-rk3399-pc Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2020-05-18common: Drop linux/bitops.h from common headerSimon Glass
Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
2020-05-18common: Drop linux/delay.h from common headerSimon Glass
Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
2020-05-18common: Drop linux/stringify.h from common headerSimon Glass
Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
2020-05-18common: Drop linux/bug.h from common headerSimon Glass
Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
2020-05-18common: Drop asm/ptrace.h from common headerSimon Glass
Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
2020-05-18common: Drop log.h from common headerSimon Glass
Move this header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
2020-05-18command: Remove the cmd_tbl_t typedefSimon Glass
We should not use typedefs in U-Boot. They cannot be used as forward declarations which means that header files must include the full header to access them. Drop the typedef and rename the struct to remove the _s suffix which is now not useful. This requires quite a few header-file additions. Signed-off-by: Simon Glass <sjg@chromium.org>
2020-05-18common: Drop init.h from common headerSimon Glass
Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
2020-05-18common: Drop net.h from common headerSimon Glass
Move this header out of the common header. Network support is used in quite a few places but it still does not warrant blanket inclusion. Note that this net.h header itself has quite a lot in it. It could be split into the driver-mode support, functions, structures, checksumming, etc. Signed-off-by: Simon Glass <sjg@chromium.org>
2020-05-14Merge tag 'u-boot-stm32-20200514' of ↵Tom Rini
https://gitlab.denx.de/u-boot/custodians/u-boot-stm - stm32mp1: migrate MTD and DFU configuration in Kconfig - stm32mp1: add command stm32prog - stm32mp1: several board and arch updates - stm32mp1: activate data cache in SPL and before relocation - Many improvment for AV96 board and DHCOR SoM (add new defconfig, DDR3 coding on DHCOR SoM, split between board and SOM Synchronize DDR setttings on DH SoMs, setting for I2C EEPROM) - clk: stm32mp1: fix CK_MPU calculation - DT alignment of stm32mp1 device tree with Linux 5.7-rc2
2020-05-14clk: stm32mp1: fix CK_MPU calculationLionel Debieve
When the CK_MPU used PLL1_MPUDIV, the current rate is wrong. The clock must use stm32mp1_mpu_div as a shift value. Fix the check value used to enter PLL_MPUDIV. Signed-off-by: Lionel Debieve <lionel.debieve@st.com> Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
2020-05-13CLK: ARC: HSDK: add separate clock map for HSDK-4xDEugeniy Paltsev
HSDK and HSDK-4xD clock trees are slightly different. commit 1dfb2ec0d7fb ("ARC: HSDK: CGU: add support for timer clock") introduce regression for HSDK board cause crash when setting tunnel clock. Fix that. Fixes: 1dfb2ec0d7fb ("ARC: HSDK: CGU: add support for timer clock") Signed-off-by: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com> Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
2020-05-13CLK: ARC: HSDK: define clock map with DT binding constantsEugeniy Paltsev
Define clock map with DT binding constants so clock map can be discontinuous. Signed-off-by: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com> Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
2020-05-13CLK: ARC: HSDK: make set_clock optionalEugeniy Paltsev
We don't want to allow change some clocks, i.e. DDR clock. So allow to have set_clock to be unset in clock map. Signed-off-by: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com> Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
2020-05-13CLK: ARC: HSDK: prepare for multiple clock maps supportEugeniy Paltsev
The clock trees of HSDK and HSDK-4xD vary so we need to prepare CGU driver for multiple clock maps support. Signed-off-by: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com> Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
2020-05-13CLK: ARC: HSDK: driver cleanupEugeniy Paltsev
Minor code cleanup to improve readability. No functional change intended. Signed-off-by: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com> Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
2020-05-13CLK: ARC: HSDK: use appropriate config data typesEugeniy Paltsev
* constify clocks config data where is possible * use more appropriate data types for clocks config Signed-off-by: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com> Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
2020-05-13CLK: ARC: HSDK: drop unused offsetEugeniy Paltsev
Drop creg_div_oft offset as it doesn't vary (due to it is used for CPU PLL only). Signed-off-by: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com> Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
2020-05-13CLK: ARC: HSDK: avoid code duplicationEugeniy Paltsev
hsdk_axi_clk_cfg and hsdk_tun_clk_cfg clock divider structures and functions for their processing are almost the same so merge them to avoid code duplication. Signed-off-by: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com> Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
2020-05-04Merge tag 'u-boot-imx-20200502' of ↵Tom Rini
https://gitlab.denx.de/u-boot/custodians/u-boot-imx i.MX for 2020.07 ---------------- - imxrt: fix LCD clock, fix doc - new board: Coral Dev - imx8: enable Cache in SPL. SNVS, update SCFW API - imx8MM: fix reset, 8MQ quand and QuadLite, CPU speed grading - MX6ULL : is_imx6ull to include i.MX6ULZ - Net: add config to enable TXC delay Travis: https://travis-ci.org/github/sbabic/u-boot-imx/builds/682033914
2020-05-04Merge tag 'u-boot-rockchip-20200501' of ↵Tom Rini
https://gitlab.denx.de/u-boot/custodians/u-boot-rockchip - dts clean up to use -u-boot for px30, rk3399 boards - dts sycn from upstream kernel for rk3328, rk3399 - add rockchip rng driver - new board support: rk3328-roc-cc, rk3399-roc-pc,Nanopi M4 2GB
2020-05-01clk: imx: clk-imxrt1050: fix lcdif clock gateGiulio Benetti
LCDIF clock gate was wrong so set it according to RM. Signed-off-by: Giulio Benetti <giulio.benetti@benettiengineering.com> Reviewed-by: Anatolij Gustschin <agust@denx.de> Reviewed-by: Fabio Estevam <festevam@gmail.com>
2020-05-01clk: rk3399: Set empty for HCLK_SD assigned-clocksJagan Teki
Due to v5.7-rc1 sync the SD controller nodes in rk3399.dtsi have HCLK_SD assigned-clocks which are usually required for Linux and don't require to handle them in U-Boot. assigned-clocks = <&cru HCLK_SD>; So, mark them as empty in clock otherwise device probe on those SD controllers would fail. Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2020-04-30Merge tag 'xilinx-for-v2020.07-rc2' of ↵Tom Rini
https://gitlab.denx.de/u-boot/custodians/u-boot-microblaze Xilinx changes for v2020.07-rc2 mmc: - Fix dt property handling via generic function clk: - Fix versal watchdog clock setting nand: - Fix zynq nand command comparison xilinx: - Enable ubifs - Sync board_late_init configurations with initrd_high setup - Make custom distro boot more verbose zynq: - Kconfig alignments - Fix nand cse configuration zynqmp: - Fix zcu104 low level qspi configuration - Small DT updates Signed-off-by: Tom Rini <trini@konsulko.com>
2020-04-28Merge tag 'u-boot-amlogic-20200428' of ↵Tom Rini
https://gitlab.denx.de/u-boot/custodians/u-boot-amlogic - fix sd-emmc controller A init on G12A/G12B/SM1 SoCs - add GXBB USB PHY driver - enable access to SPI NOR Flash on VIM2 and VIM3/VIM3L boards - fix USB PHYs Power-Up on on VIM3/VIM3L boards
2020-04-28clk: meson: g12a: add missing SD_EMMC_A controller gatesNeil Armstrong
Add missing SD_EMMC_A controller gates needed for probe of the A controller, otherwise leading to a freeze of the SoC after b3d69aa596. Fixes: b3d69aa596 ("clk: meson: reset mmc clock on probe") Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
2020-04-27clk: versal: Fix watchdog clock issueT Karthik Reddy
Enable mux based clocks to populate LPD_LSBUS clock to xilinx_wwdt driver. Skip reading clock rate for the mux based clocks with parent clock id is zero. Signed-off-by: T Karthik Reddy <t.karthik.reddy@xilinx.com> Signed-off-by: Ashok Reddy Soma <ashok.reddy.soma@xilinx.com>
2020-04-27ARC: HSDK: CGU: add support for timer clockEugeniy Paltsev
Add support for additional timer clock which belongs to tunnel domain. Signed-off-by: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com> Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
2020-04-24clk: actions: Add common clock driverAmit Singh Tomar
This patch converts S900 clock driver to something common that can be used for other SoCs, for instance S700(few of clk registers are same). Reviewed-by: Andre Przywara <andre.przywara@arm.com> Signed-off-by: Amit Singh Tomar <amittomer25@gmail.com>
2020-04-24arm: dts: sync dts for Action Semi S900Amit Singh Tomar
Synchronize device tree bindings with v5.5-rc6 tag with commit id "b3a987b0264d". Also, it removes older clock binding defined for S900 along with undocumented compatible string "actions,s900-serial" from serial driver and adapts clock driver to cater to new bindings. Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Reviewed-by: Andre Przywara <andre.przywara@arm.com> Signed-off-by: Amit Singh Tomar <amittomer25@gmail.com>
2020-04-22clk: armada-37xx-periph: fix DDR PHY clock divider valuesMarek Behún
Register value table for DDR PHY clock divider are wrong. They should be 0 or 1 for divide-by-2 or divide-by-4, respectively. Not 1 or 2. Current values do not make sense, since 2 cannot be achieved, because the register is only 1 bit long (mask is set to 1). This fixes clk dump reporting DDR PHY clock rate differently from Linux. Signed-off-by: Marek Behún <marek.behun@nic.cz> Reviewed-by: Stefan Roese <sr@denx.de>
2020-04-18clk: imx: add i.IMXRT1020 clk driverGiulio Benetti
Add i.MXRT1020 clk driver support. Signed-off-by: Giulio Benetti <giulio.benetti@benettiengineering.com> Reviewed-by: Lukasz Majewski <lukma@denx.de>
2020-04-18clk: imx: clk-imxrt1050: add set_parent() callbackGiulio Benetti
Need to add set_parent() callback to allow dts assigned-clock-parents to work so let's add it accordingly. Signed-off-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
2020-04-18clk: imx: clk-imxrt1050: setup PLL5 for video in non-SPLGiulio Benetti
mxsfb needs PLL5 as source, so let's setup it at its default frequency specified in RM(650Mhz). Signed-off-by: Giulio Benetti <giulio.benetti@benettiengineering.com> Reviewed-by: Lukasz Majewski <lukma@denx.de>
2020-04-18clk: imx: clk-imxrt1050: fix typo in clock name "video:"Giulio Benetti
"video:" must be "video", ":" is a typo. Signed-off-by: Giulio Benetti <giulio.benetti@benettiengineering.com> Reviewed-by: Lukasz Majewski <lukma@denx.de>
generated by cgit (git 2.34.1) at 2024-12-24 19:22:25 +0000