summaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)Author
2016-01-27net: emaclite: Use indirect reg access in sendMichal Simek
The original logic in the driver was exchanging buffers which are used for sending packet and tx_ping and tx_pong buffers were exchanged all the time to ensure that IP has enough time to send the packet out. Based on this "feature" send function was using nextbuffertouse variable to save which buffer should be used. Before this algorithm was called driver checked that there is free buffer available. This checking remains in the driver but driver tries to use tx_ping first if available. If not, tx_pong buffer is used instead. To reach this code the original condition is met that at least one of the buffer should be available. Testing doesn't show any performance drop when this patch is applied. Signed-off-by: Michal Simek <michal.simek@xilinx.com> Acked-by: Joe Hershberger <joe.hershberger@ni.com>
2016-01-27net: emaclite: Remove XEL_TSR_XMIT_ACTIVE_MASK flagMichal Simek
This flag is not documented anywhere in the latest documentation that's why this patch removes it. Signed-off-by: Michal Simek <michal.simek@xilinx.com> Acked-by: Joe Hershberger <joe.hershberger@ni.com>
2016-01-27net: emaclite: Fix logic around available TX buffersMichal Simek
Simplify logic how to find out if there is free TX buffer. Both buffers are checked all the time that's why logic around order can be removed. Also add check when only one buffer is available. Signed-off-by: Michal Simek <michal.simek@xilinx.com> Acked-by: Joe Hershberger <joe.hershberger@ni.com>
2016-01-27net: emaclite: Use indirect register access for TX resetMichal Simek
Move to use indirect register access when timeout expires for resetting TX buffers. Signed-off-by: Michal Simek <michal.simek@xilinx.com> Acked-by: Joe Hershberger <joe.hershberger@ni.com>
2016-01-27net: emaclite: Use indirect register access for rx_ping/pongMichal Simek
Do initialization via indirect register access. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2016-01-27net: emaclite: Use indirect register access for tx_ping/pongMichal Simek
Do initialization via indirect register access. Signed-off-by: Michal Simek <michal.simek@xilinx.com> Acked-by: Joe Hershberger <joe.hershberger@ni.com>
2016-01-27net: emaclite: Convert MDIO to use register offsetMichal Simek
Use u-boot coding style how to setup and access MDIO bus. Signed-off-by: Michal Simek <michal.simek@xilinx.com> Acked-by: Joe Hershberger <joe.hershberger@ni.com>
2016-01-27net: emaclite: Add MDIO support to driverMichal Simek
Add MDIO support before move to DM. Signed-off-by: Michal Simek <michal.simek@xilinx.com> Acked-by: Joe Hershberger <joe.hershberger@ni.com>
2016-01-27net: emaclite: Remove ancient OF probe functionMichal Simek
Prepare for DM move. Signed-off-by: Michal Simek <michal.simek@xilinx.com> Acked-by: Joe Hershberger <joe.hershberger@ni.com>
2016-01-27net: Add axi emac to KconfigMichal Simek
Also add dependency on PHYLIB and MII which is required. Clean PHYLIB dependency from the driver too. Signed-off-by: Michal Simek <michal.simek@xilinx.com> Acked-by: Joe Hershberger <joe.hershberger@ni.com>
2016-01-27net: axi_emac: Rename start, stop, write_hwaddr functionsMichal Simek
Rename few functions to fit to the new name convention used by DM. Suggested-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2016-01-27net: axi_emac: Split recv from free_pktMichal Simek
Call net_process_received_packet() by core. Signed-off-by: Michal Simek <michal.simek@xilinx.com> Acked-by: Joe Hershberger <joe.hershberger@ni.com>
2016-01-27net: axi_emac: Enable access to MDIO in probeMichal Simek
Detect phy when driver probes. Signed-off-by: Michal Simek <michal.simek@xilinx.com> Acked-by: Joe Hershberger <joe.hershberger@ni.com>
2016-01-27net: axi_emac: Move driver to DMMichal Simek
Move driver to DM. Signed-off-by: Michal Simek <michal.simek@xilinx.com> Acked-by: Joe Hershberger <joe.hershberger@ni.com>
2016-01-27net: axi_emac: Pass private structure where possibleMichal Simek
Use axidma_priv instead of ethdevice in preparation of the DM move. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2016-01-27net: axi_emac: Pass private structure to phyread/phywriteMichal Simek
Prepare for move to DM. Signed-off-by: Michal Simek <michal.simek@xilinx.com> Acked-by: Joe Hershberger <joe.hershberger@ni.com>
2016-01-27net: axi_emac: Put iobase to private structureMichal Simek
Saving iobase directly to private structure helps with moving to DM. There is an option to load iobase from pdata but it is additional load. Pointer to private structure is available all the time. Signed-off-by: Michal Simek <michal.simek@xilinx.com> Acked-by: Joe Hershberger <joe.hershberger@ni.com>
2016-01-27net: axi_emac: Pass directly pointer to register spaceMichal Simek
Simplify mdio_wait function by passing regs directly. Signed-off-by: Michal Simek <michal.simek@xilinx.com> Acked-by: Joe Hershberger <joe.hershberger@ni.com>
2016-01-27net: axi_emac: Show phy address instead of register contentMichal Simek
Fix debug message. Signed-off-by: Michal Simek <michal.simek@xilinx.com> Acked-by: Joe Hershberger <joe.hershberger@ni.com>
2016-01-27net: axi_emac: Fix parentheses around operand !Michal Simek
Fix these compilation warning by proper grouping: In function 'axi_dma_init': drivers/net/xilinx_axi_emac.c:391:7: warning: suggest parentheses around operand of '!' or change '&' to '&&' or '!' to '~' [-Wparentheses] if (!(in_be32(&priv->dmatx->control) | ^ In function 'axiemac_send': drivers/net/xilinx_axi_emac.c:501:21: warning: suggest parentheses around operand of '!' or change '&' to '&&' or '!' to '~' [-Wparentheses] while (timeout && (!in_be32(&priv->dmatx->status) & Signed-off-by: Michal Simek <michal.simek@xilinx.com> Acked-by: Joe Hershberger <joe.hershberger@ni.com>
2016-01-27serial: uartlite: Add uartlite to KconfigMichal Simek
- Move config option out of board file. - Remove uartlite address from config file Signed-off-by: Michal Simek <michal.simek@xilinx.com> Reviewed-by: Thomas Chou <thomas@wytron.com.tw>
2016-01-27serial: uartlite: Add support for debug consoleMichal Simek
Add support for debug console. Signed-off-by: Michal Simek <michal.simek@xilinx.com> Reviewed-by: Thomas Chou <thomas@wytron.com.tw>
2016-01-27serial: uartlite: Move driver to DMMichal Simek
Enable SPL DM too. Signed-off-by: Michal Simek <michal.simek@xilinx.com> Reviewed-by: Thomas Chou <thomas@wytron.com.tw>
2016-01-27mailaddr: Update mail addressRicardo Ribalda Delgado
The old mail address will stop working soon. Update it all the files Signed-off-by: Ricardo Ribalda Delgado <ricardo.ribalda@gmail.com> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Tom Rini <trini@konsulko.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com> Reviewed-by: Michal Simek <michal.simek@xilinx.com>
2016-01-27atmel_nand: use the definition: PMECC_OOB_RESERVED_BYTES instead magic numberJosh Wu
As atmel_nand_ecc.h is sync with v4.1 kernel, which adds the PMECC_OOB_RESERVED_BYTES. So use it in the driver. Signed-off-by: Josh Wu <josh.wu@atmel.com> Reviewed-by: Andreas Bießmann <andreas.devel@googlemail.com> Signed-off-by: Wenyou Yang <wenyou.yang@atmel.com>
2016-01-27atmel_nand: add '\n' in the end of error message for better displayJosh Wu
Also align the open parenthesis. Signed-off-by: Josh Wu <josh.wu@atmel.com> Signed-off-by: Wenyou Yang <wenyou.yang@atmel.com> Reviewed-by: Andreas Bießmann <andreas.devel@googlemail.com>
2016-01-27atmel_nand: use nand ecc_{strength, step}_ds instead of our own functionJosh Wu
Since ecc_{strength,step}_ds is introduced in nand_chip structure for minimum ecc requirements. So we can use them directly and remove our own get_onfi_ecc_param function. Signed-off-by: Josh Wu <josh.wu@atmel.com> Reviewed-by: Andreas Bießmann <andreas.devel@googlemail.com> Signed-off-by: Wenyou Yang <wenyou.yang@atmel.com>
2016-01-27net: macb: Not all the GEM are gigabit capableGregory CLEMENT
During the initialization of PHY the gigabit bit capable is set if the controller is a GEM. However, for sama5d2 and sama5d4, the GEM is configured to support only 10/100. Improperly setting the GBE capability leads to an unresponsive MAC controller. This patch fixes this behavior allowing using the gmac with these SoCs. Suggested-by: Nicolas Ferre <nicolas.ferre@atmel.com> Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com> Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com> Acked-by: Joe Hershberger <joe.hershberger@ni.com> Reviewed-by: Andreas Bießmann <andreas.devel@googlemail.com> [fixed minor checkpatch warning] Signed-off-by: Andreas Bießmann <andreas.devel@googlemail.com>
2016-01-27mmc: atmel: Properly fix clock configurationGregory CLEMENT
Timing issue occurs on eMMC not only when modifying the frequency but also for all the switch command(CMD6). According to the MMC spec waiting 8 clocks after a switch command would be the thing to do. This patch allows fixing CPU hang observed when trying to changing the bus width on a eMMC on SAMA5D4. Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com> Tested-by: Marek Vasut <marex@denx.de> # on DENX MA5D4EV Acked-by: Marek Vasut <marex@denx.de> Tested-by: Andreas Bießmann <andreas.devel@googlemail.com> # on atngw100 Acked-by: Andreas Bießmann <andreas.devel@googlemail.com> [fixed minor checkpatch warning] Signed-off-by: Andreas Bießmann <andreas.devel@googlemail.com>
2016-01-26Merge branch 'master' of http://git.denx.de/u-boot-sunxiTom Rini
2016-01-26mvtwsi: Fix breakage introduced by "Fix mvtwsi not working on sun6i and ↵Hans de Goede
newer sunxi SoCs" "Fix mvtwsi not working on sun6i and newer sunxi SoCs" includes the following: @@ -189,7 +200,8 @@ static int twsi_start(struct i2c_adapter *adap, int expected_status) /* globally set TWSIEN in case it was not */ twsi_control_flags |= MVTWSI_CONTROL_TWSIEN; /* assert START */ - writel(twsi_control_flags | MVTWSI_CONTROL_START, &twsi->control); + twsi_control_flags |= MVTWSI_CONTROL_START | MVTWSI_CONTROL_CLEAR_IFLG; + writel(twsi_control_flags, &twsi->control); /* wait for controller to process START */ return twsi_wait(adap, expected_status); } The modification of twsi_control_flags done here was introduced while merging to fix a line > 80 chars, but twsi_control_flags is a global variable and should not be modified like this here, this commit fixes this, restoring mvtwsi functionality. Signed-off-by: Hans de Goede <hdegoede@redhat.com>
2016-01-26sunxi: power: axp818: Enable support for ALDOsChen-Yu Tsai
Previously, AXP818 ALDO support was partially added to Kconfig, but never enabled in the board file, nor properly set or configured in Kconfig. The boards continue to work because the AXP818 is designed to pair with the A83T/H8, and the default voltages match the reference design's requirements. Signed-off-by: Chen-Yu Tsai <wens@csie.org> Acked-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com>
2016-01-26power: axp818: Add support for DLDO and ELDO regulatorsChen-Yu Tsai
AXP818 provides an array of LDOs to provide power to various peripherals. None of these regulators are critical. Signed-off-by: Chen-Yu Tsai <wens@csie.org> Acked-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com>
2016-01-26power: axp: merge separate DLDO functions into 1Chen-Yu Tsai
Instead of one function for each DLDO regulator, make 1 function that takes an extra "index". Since the control bits for the DLDO regulators are contiguous, this makes the function very simple. This removes a lot of duplicate code. Signed-off-by: Chen-Yu Tsai <wens@csie.org> Acked-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com>
2016-01-26sunxi: Implement poweroff support for axp221 pmicHans de Goede
Adds poweroff support for axp221 pmic. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Acked-by: Ian Campbell <ijc@hellion.org.uk>
2016-01-26sunxi: Implement poweroff support for axp209 pmicMichael van Slingerland
Adds poweroff support for axp209 pmic. Signed-off-by: Michael van Slingerland <michael@deviousops.nl> Signed-off-by: Hans de Goede <hdegoede@redhat.com> Acked-by: Ian Campbell <ijc@hellion.org.uk>
2016-01-26sunxi: Implement poweroff support for axp152 pmicHans de Goede
Adds poweroff support for axp152 pmic. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Acked-by: Ian Campbell <ijc@hellion.org.uk>
2016-01-26Merge branch 'master' of git://git.denx.de/u-boot-videoTom Rini
2016-01-26video: add CONFIG_I2C_EDID and disable CONFIG_DISPLAY by defaultAnatolij Gustschin
Enabling CONFIG_DISPLAY breaks building for some architectures (microblaze-generic), so we disable CONFIG_DISPLAY in Kconfig by default and enable this option in defconfigs. CONFIG_DISPLAY depends on CONFIG_I2C_EDID, so add and enable it in defconfigs, too. Signed-off-by: Anatolij Gustschin <agust@denx.de> Reported-by: Bin Meng <bmeng.cn@gmail.com> Cc: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org> Tested-by: Bin Meng <bmeng.cn@gmail.com> Signed-off-by: Anatolij Gustschin <agust@denx.de>
2016-01-25Merge branch 'master' of git://git.denx.de/u-boot-usbTom Rini
2016-01-25usb: add clock support for generic EHCIMasahiro Yamada
This driver is designed in a generic manner, so clocks should be handled genericly as well. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2016-01-25drivers: net: fsl_mc: Compare pointer value qbman_swp_mc_startPratiyush Mohan Srivastava
Current code compares the return pointer of function qbman_cena_write_start with NULL. Instead the value of the return pointer should be compared. Signed-off-by: Pratiyush Mohan Srivastava <pratiyush.srivastava@freescale.com> Acked-by: Prabhakar Kushwaha <prabhakar.kushwaha@nxp.com> Reviewed-by: York Sun <york.sun@nxp.com>
2016-01-25drivers/ddr/fsl: fsl_ddr_sdram_size remove unused controllersEd Swarthout
Following commit 61bd2f75, exclude unused DDR controller from calculating RAM size for SPL boot. Signed-off-by: Ed Swarthout <Ed.Swarthout@nxp.com> Reviewed-by: York Sun <york.sun@nxp.com>
2016-01-25driver/ddr/fsl: Add workaround for A009663Shengzhou Liu
Erratum A-009663 workaround requires to set DDR_INTERVAL[BSTOPRE] to 0 before setting DDR_SDRAM_CFG[MEM_EN] and set DDR_INTERVAL[BSTOPRE] to the desired value after DDR initialization has completed. When DDR controller is configured to operate in auto-precharge mode(DDR_INTERVAL[BSTOPRE]=0), this workaround is not needed. Signed-off-by: Shengzhou Liu <Shengzhou.Liu@freescale.com> Reviewed-by: York Sun <york.sun@nxp.com>
2016-01-25fsl/ddr: Add workaround for ERRATUM_A009942Shengzhou Liu
During the receive data training, the DDRC may complete on a non-optimal setting that could lead to data corruption or initialization failure. Workaround: before setting MEM_EN, set DEBUG_29 register with specific value for different data rates. Signed-off-by: Shengzhou Liu <Shengzhou.Liu@freescale.com> Reviewed-by: York Sun <york.sun@nxp.com>
2016-01-25Merge branch 'master' of git://git.denx.de/u-boot-imxTom Rini
2016-01-25ns16550: zap the rockchip serial compatible stringThomas Chou
Zap the rockchip serial compatible string, because rockchip serial has "snps,dw-apb-uart" compatible string in the dts. Signed-off-by: Thomas Chou <thomas@wytron.com.tw> Acked-by: Simon Glass <sjg@chromium.org>
2016-01-25net: eepro100: Fix build warningsBin Meng
When building katmai, it reports quite a lot warning: cast to pointer from integer of different size [-Wint-to-pointer-cast] Fix this by casting the dev->iobase with u_long. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Acked-by: Joe Hershberger <joe.hershberger@ni.com>
2016-01-25bug.h: move BUILD_BUG_* defines to include/linux/bug.hMasahiro Yamada
BUILD_BUG_* macros have been defined in several headers. It would be nice to collect them in include/linux/bug.h like Linux. This commit is cherry-picking useful macros from include/linux/bug.h of Linux 4.4. I did not import BUILD_BUG_ON_MSG() because it would not work if it is used with include/common.h in U-Boot. I'd like to postpone it until the root cause (the "error()" macro in include/common.h causes the name conflict with "__attribute__((error()))") is fixed. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Reviewed-by: Tom Rini <trini@konsulko.com>
2016-01-25net: zynq_gem: Use shared wait_for_bitMateusz Kulikowski
Use existing library function to poll bit(s). Signed-off-by: Mateusz Kulikowski <mateusz.kulikowski@gmail.com>
generated by cgit (git 2.34.1) at 2025-01-25 15:50:53 +0000