summaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)Author
2019-07-31mmc: relocate code commentBaruch Siach
The comment about init op being NULL used to be next to the NULL check code. Commit 8ca51e51c182 ("dm: mmc: Add a way to use driver model for MMC operations") separated the comment from the code. Put them back together. Fixes: 8ca51e51c182 ("dm: mmc: Add a way to use driver model for MMC operations") Signed-off-by: Baruch Siach <baruch@tkos.co.il> Reviewed-by: Peng Fan <peng.fan@nxp.com>
2019-07-31mmc: mtk-sd: add WATCHDOG_RESET() to prevent watchdog timeoutWeijie Gao
When reading large data in once (reading 512MiB is tested on MT7623), a watchdog timeout is triggered due to watchdog not being fed. This patch adds WATCHDOG_RESET() to msdc_start_data() so the watchdog will be fed every 1024 blocks are read/written. Signed-off-by: Weijie Gao <weijie.gao@mediatek.com>
2019-07-31mmc: sdhci: fix chip detect gpio property nameBaruch Siach
The standard property name for chip-detect gpio is "cd-gpios". All in-tree DT files use only this name. Fixes: 451931ea700 ("mmc: sdhci: Read cd-gpio from devicetree") Cc: T Karthik Reddy <t.karthik.reddy@xilinx.com> Cc: Michal Simek <michal.simek@xilinx.com> Signed-off-by: Baruch Siach <baruch@tkos.co.il> Reviewed-by: Peng Fan <peng.fan@nxp.com>
2019-07-31mmc: mv_sdhci: fix uninitialized pointer deref on probeBaruch Siach
Since commit 3d296365e4e8 ("mmc: sdhci: Add support for sdhci-caps-mask") sdhci_setup_cfg() expects a valid sdhci_host mmc field. Move the mmc field initialization before sdhci_setup_cfg() call to avoid crash on mmc pointer dereference. Fixes: 3d296365e4e8 ("mmc: sdhci: Add support for sdhci-caps-mask") Cc: Faiz Abbas <faiz_abbas@ti.com> Signed-off-by: Baruch Siach <baruch@tkos.co.il>
2019-07-31clk: sandbox: add composite clkPeng Fan
Add composite clk to sandbox driver Signed-off-by: Peng Fan <peng.fan@nxp.com>
2019-07-31clk: gate: support sandboxPeng Fan
Introduce io_gate_val for sandbox clk gate test usage Signed-off-by: Peng Fan <peng.fan@nxp.com>
2019-07-31clk: add composite clk supportPeng Fan
Import clk composite clk support from Linux Kernel 5.1-rc5 Signed-off-by: Peng Fan <peng.fan@nxp.com>
2019-07-31dm: clk: ignore default settings when node not validPeng Fan
When the device not binded with a node, we need ignore the parents and rate settings. Cc: Simon Glass <sjg@chromium.org> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Philipp Tomsich <philipp.tomsich@theobroma-systems.com> Cc: Neil Armstrong <narmstrong@baylibre.com> Cc: Andreas Dannenberg <dannenberg@ti.com> Signed-off-by: Peng Fan <peng.fan@nxp.com>
2019-07-31clk: imx: gate2 add set ratePeng Fan
Add set rate for imx clk-gate2 Signed-off-by: Peng Fan <peng.fan@nxp.com>
2019-07-31clk: imx: import clk heplersPeng Fan
Import some clk helpers from Linux Kernel for i.MX8MM usage Signed-off-by: Peng Fan <peng.fan@nxp.com>
2019-07-31clk: fixed_rate: export clk_fixed_ratePeng Fan
Export the structure for others to use. Signed-off-by: Peng Fan <peng.fan@nxp.com>
2019-07-31clk: divider set rate supporrtPeng Fan
Signed-off-by: Peng Fan <peng.fan@nxp.com>
2019-07-31clk: add clk-gate supportPeng Fan
Import clk-gate support from Linux Kernel 5.1-rc5 Signed-off-by: Peng Fan <peng.fan@nxp.com>
2019-07-31clk: mux: add set parent supportPeng Fan
Add set parent support for clk mux Signed-off-by: Peng Fan <peng.fan@nxp.com>
2019-07-31clk: use clk_dev_bindedPeng Fan
Preparing to support composite clk. Signed-off-by: Peng Fan <peng.fan@nxp.com>
2019-07-31clk: introduce clk_dev_bindedPeng Fan
When support Clock Common Framework, U-Boot use dev for clk tree information, there is no clk->parent. When support composite clk, it contains mux/gate/divider, but the mux/gate/divider is not binded with device. So we could not use dev_get_uclass_priv to get the correct clk_mux/gate/divider. So add clk_dev_binded to let choose the correct method. Signed-off-by: Peng Fan <peng.fan@nxp.com>
2019-07-31dw_mmc: turn on the IO supplyUrja Rannikko
Fixes the microSD slot on the ASUS C201. Signed-off-by: Urja Rannikko <urjaman@gmail.com> Reviewed-by: Simon Glass <sjg@chromium.org> Reviewed-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Peng Fan <peng.fan@nxp.com<mailto:peng.fan@nxp.com>>
2019-07-30Merge tag 'video-for-2019.10-rc1' of ↵Tom Rini
https://gitlab.denx.de/u-boot/custodians/u-boot-video - fix EDID mode filtering - extend mxc_ipuv3_fb to enable backlight/display - include fb_base in global_data for DM_VIDEO - show frame buffer address via board info as used to be with legacy VIDEO support
2019-07-30Merge tag 'xilinx-for-v2019.10' of ↵Tom Rini
https://gitlab.denx.de/u-boot/custodians/u-boot-microblaze Xilinx/FPGA changes for v2019.10 fpga: - Xilinx virtex2 cleanup - Altera cyclon2 cleanup zynq: - Minor Kconfig cleanup - Add psu_init configuration for Z-turn board zynqmp: - Add support for pmufw config passing to PMU - script for psu_init conversion - zcu1275 renaming xilinx: - Add support for UltraZed-EV SoM
2019-07-30Merge branch 'master' of git://git.denx.de/u-boot-shTom Rini
2019-07-30mxc_ipuv3_fb.c: enable a backlight on a panelHeiko Schocher
check if we get a panel device, if so, enable the backlight on it. Signed-off-by: Heiko Schocher <hs@denx.de>
2019-07-30mxc_ipuv3_fb.c: call display_enableHeiko Schocher
call display_enable, so a display gets enabled. Signed-off-by: Heiko Schocher <hs@denx.de>
2019-07-30mxc_ipuv3_fb.c: set gd->fb_baseHeiko Schocher
set gd->fb_base so it can be shown with bdinfo command. Signed-off-by: Heiko Schocher <hs@denx.de>
2019-07-30fpga: altera: cyclon2: Check function pointer before callingAlexander Dahl
As already done for the 'pre' function, a check is added to not follow a NULL pointer, if somebody has not assigned a 'post' function. Signed-off-by: Alexander Dahl <ada@thorsis.com>
2019-07-30fpga: altera: cyclon2: Fix indentationAlexander Dahl
Some code parts stood too far left … Signed-off-by: Alexander Dahl <ada@thorsis.com>
2019-07-30fpga: altera: cyclon2: Fix most checkpatch warningsAlexander Dahl
Nothing special, but done before further cleanup. * spacing * braces * __FUNCTION__ → __func__ Suggested-by: Michal Simek <michal.simek@xilinx.com> Signed-off-by: Alexander Dahl <ada@thorsis.com>
2019-07-30fpga: virtex2: Add slave serial programming supportRobert Hancock
This adds support for slave serial programming, in addition to the previously supported slave SelectMAP mode. There are two ways that this can be used: -Using the clk and wdata callbacks in order to write image data one bit at a time using pure bit-banging. This works, but is rather painfully slow with typical image sizes. -By specifying the wbulkdata callback instead, the image loading process can be offloaded to SPI hardware. In this mode the clk and wdata callbacks do not need to be specified. This allows the image to be loaded much faster, taking only a few seconds with even relatively large images. Slave serial programming has been tested on the Kintex-7 series of FPGAs. Signed-off-by: Robert Hancock <hancock@sedsystems.ca> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2019-07-30fpga: virtex2: Add additional clock cycles after DONE assertionRobert Hancock
Some Xilinx FPGA configuration options can result in the startup sequence extending past the end of the FPGA bitstream. Continue applying CCLK clock cycles for 8 cycles after DONE is asserted in order to ensure the startup sequence is complete, as recommended by Xilinx. Signed-off-by: Robert Hancock <hancock@sedsystems.ca> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2019-07-30fpga: virtex2: Split out image writing from pre/post operationsRobert Hancock
This is in preparation for adding slave serial programming support, which uses the same pre/post operations as slave SelectMAP, to avoid duplicating code. Signed-off-by: Robert Hancock <hancock@sedsystems.ca> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2019-07-30fpga: virtex2: added Kconfig optionRobert Hancock
Add an option to allow this driver to be selected with Kconfig. As noted in the description, this driver should also work with many newer Xilinx FPGA families as the programming methods are essentially the same. Also added a missing FPGA_XILINX dependency to the similar Spartan 3 driver. Signed-off-by: Robert Hancock <hancock@sedsystems.ca> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2019-07-30fpga: virtex2: cosmetic: Cleanup code styleRobert Hancock
Address Checkpatch warnings in virtex2 code prior to making other changes. No functional change intended. Signed-off-by: Robert Hancock <hancock@sedsystems.ca> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2019-07-29Merge branch '2019-07-29-ti-imports'Tom Rini
- More DaVinci DM migration, drop am18xx EVM platform - Keystone bug fix
2019-07-29nand: davinci: add support for driver modelBartosz Golaszewski
Extend the davinci NAND driver to support the driver model. For now this doesn't add any device-tree parsing due to the fact that we can't access the actual nand node on the device-tree - it's a subnode of the aemif device and we don't have an aemif driver on davinci at the moment. Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
2019-07-29nand: davinci: make davinci_nand_init() staticBartosz Golaszewski
This function is only used within the driver itself. No need to export it. Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
2019-07-29i2c: remove i2c driver-model compatibility layerBartosz Golaszewski
There are no more users of the compatibility layer for i2c. Remove the driver and all references to it. Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com> Acked-by: Heiko Schocher <hs@denx.de>
2019-07-29Merge branch '2019-07-29-master-imports'Tom Rini
- Assorted bug fixes
2019-07-29rtc, rx8025: add DM supportHeiko Schocher
add DM support for this RTC driver. Signed-off-by: Heiko Schocher <hs@denx.de>
2019-07-29rtc, rx8025: fix Coding StyleHeiko Schocher
fix Coding Style for this driver. Signed-off-by: Heiko Schocher <hs@denx.de>
2019-07-29rtc: move RTC_RX8025 to KconfigHeiko Schocher
move RTC_RX8025 to Kconfig and fixup board configs. Signed-off-by: Heiko Schocher <hs@denx.de>
2019-07-29pinctrl: mediatek: fix warningFabien Parent
Fix the following warning when CONFIG_PINCONF=n: drivers/pinctrl/mediatek/pinctrl-mtk-common.c:35:36: warning: ‘mtk_drive’ defined but not used [-Wunused-const-variable=] static const struct mtk_drive_desc mtk_drive[] = { ^~~~~~~~~ Signed-off-by: Fabien Parent <fparent@baylibre.com>
2019-07-29gpio: fixes for gpio-hog supportHeiko Schocher
recently added gpio hog patch was "in discussion" state with Simon Glass. This patch now adds most of comments from Simon Glass. Signed-off-by: Heiko Schocher <hs@denx.de>
2019-07-29doc: arch: sandbox: Replace all the instances of README.sandboxKeerthy
commit 49116e6d236d ("doc: arch: Convert README.sandbox to reST") Moves README.sandbox to doc/arch. Replace all the existing instances to point to the right documentation file. Signed-off-by: Keerthy <j-keerthy@ti.com>
2019-07-29Merge https://gitlab.denx.de/u-boot/custodians/u-boot-socfpgaTom Rini
- Various gen5 fixes
2019-07-29Merge tag 'video-for-2019.10' of ↵Tom Rini
https://gitlab.denx.de/u-boot/custodians/u-boot-video - dcu and imx7 DM_VIDEO conversion - lb070wv8 compatible in simple_panel driver - bmp_logo improvements for DM_VIDEO - EDID updates to filter supported modes - meson_dw_hdmi: support EDID mode filtering - dw_hdmi: support ddc-i2c-bus phandle for external I2C masters - fix rpi crash when firmware doesn't report connected display
2019-07-29Merge tag 'u-boot-rockchip-20190729' of ↵Tom Rini
https://gitlab.denx.de/u-boot/custodians/u-boot-rockchip - Clean up and migrate to use common rockchip spl board file - Clean up and migrate to use common rockchip board file - Increase rk3288 CONFIG_SYS_BOOTM_LEN to 16MB
2019-07-29pinctrl: renesas: fix R-Car gpio0_00 operation fails with 'gpio -input' commandtitron
Fix GPIO bank 0 pin 0 request/release off by one error. Without this patch, it is not possible to request/release GPIO bank 0 pin 0. Signed-off-by: Tiezhuang Dong <tiezhuang.dong.yh@renesas.com> Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com> Cc: Eugeniu Rosca <roscaeugeniu@gmail.com> Cc: Yoshihiro Shimoda <shimoda.yoshihiro.uh@renesas.com>
2019-07-29video: arm: rpi: Bail out early if querying video information failsFabian Vogt
When probing we query for the width and hight of the display. If the firmware does not report any connected display the system will crash. See https://github.com/raspberrypi/firmware/issues/1157 for details. Signed-off-by: Fabian Vogt <fvogt@suse.com> [mb: update commit message] Signed-off-by: Matthias Brugger <mbrugger@suse.com> Reviewed-by: Andre Przywara <andre.przywara@arm.com> Tested-by: Andre Przywara <andre.przywara@arm.com>
2019-07-29rockchip: rk3188: init CPU freq in clock driverKever Yang
Init CPU frquency in clock driver instead of in SPL board file, this will help for use common board file later. Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
2019-07-29video: dw_hdmi: Add support for ddc-i2c-bus propertyNiklas Schulze
Add support for the ddc-i2c-bus device tree property which allows for using an external i2c master for reading the display's EDID. Signed-off-by: Niklas Schulze <me@jns.io>
2019-07-29video: meson: dw-hdmi: add EDID mode filtering to only select supported modesNeil Armstrong
Add support for the new mode_valid() display op to filter out unsupported display DMT timings. This is useful when connected to 4k displays, since we only support DMT monitors up to 1920x1080, the 4k native timings are discarded to select supported timings. Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
generated by cgit (git 2.34.1) at 2025-01-10 14:05:46 +0000