summaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)Author
2019-07-29Merge branch '2019-07-29-ti-imports'Tom Rini
- More DaVinci DM migration, drop am18xx EVM platform - Keystone bug fix
2019-07-29nand: davinci: add support for driver modelBartosz Golaszewski
Extend the davinci NAND driver to support the driver model. For now this doesn't add any device-tree parsing due to the fact that we can't access the actual nand node on the device-tree - it's a subnode of the aemif device and we don't have an aemif driver on davinci at the moment. Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
2019-07-29nand: davinci: make davinci_nand_init() staticBartosz Golaszewski
This function is only used within the driver itself. No need to export it. Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
2019-07-29i2c: remove i2c driver-model compatibility layerBartosz Golaszewski
There are no more users of the compatibility layer for i2c. Remove the driver and all references to it. Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com> Acked-by: Heiko Schocher <hs@denx.de>
2019-07-29Merge branch '2019-07-29-master-imports'Tom Rini
- Assorted bug fixes
2019-07-29rtc, rx8025: add DM supportHeiko Schocher
add DM support for this RTC driver. Signed-off-by: Heiko Schocher <hs@denx.de>
2019-07-29rtc, rx8025: fix Coding StyleHeiko Schocher
fix Coding Style for this driver. Signed-off-by: Heiko Schocher <hs@denx.de>
2019-07-29rtc: move RTC_RX8025 to KconfigHeiko Schocher
move RTC_RX8025 to Kconfig and fixup board configs. Signed-off-by: Heiko Schocher <hs@denx.de>
2019-07-29pinctrl: mediatek: fix warningFabien Parent
Fix the following warning when CONFIG_PINCONF=n: drivers/pinctrl/mediatek/pinctrl-mtk-common.c:35:36: warning: ‘mtk_drive’ defined but not used [-Wunused-const-variable=] static const struct mtk_drive_desc mtk_drive[] = { ^~~~~~~~~ Signed-off-by: Fabien Parent <fparent@baylibre.com>
2019-07-29gpio: fixes for gpio-hog supportHeiko Schocher
recently added gpio hog patch was "in discussion" state with Simon Glass. This patch now adds most of comments from Simon Glass. Signed-off-by: Heiko Schocher <hs@denx.de>
2019-07-29doc: arch: sandbox: Replace all the instances of README.sandboxKeerthy
commit 49116e6d236d ("doc: arch: Convert README.sandbox to reST") Moves README.sandbox to doc/arch. Replace all the existing instances to point to the right documentation file. Signed-off-by: Keerthy <j-keerthy@ti.com>
2019-07-29Merge https://gitlab.denx.de/u-boot/custodians/u-boot-socfpgaTom Rini
- Various gen5 fixes
2019-07-29Merge tag 'video-for-2019.10' of ↵Tom Rini
https://gitlab.denx.de/u-boot/custodians/u-boot-video - dcu and imx7 DM_VIDEO conversion - lb070wv8 compatible in simple_panel driver - bmp_logo improvements for DM_VIDEO - EDID updates to filter supported modes - meson_dw_hdmi: support EDID mode filtering - dw_hdmi: support ddc-i2c-bus phandle for external I2C masters - fix rpi crash when firmware doesn't report connected display
2019-07-29Merge tag 'u-boot-rockchip-20190729' of ↵Tom Rini
https://gitlab.denx.de/u-boot/custodians/u-boot-rockchip - Clean up and migrate to use common rockchip spl board file - Clean up and migrate to use common rockchip board file - Increase rk3288 CONFIG_SYS_BOOTM_LEN to 16MB
2019-07-29video: arm: rpi: Bail out early if querying video information failsFabian Vogt
When probing we query for the width and hight of the display. If the firmware does not report any connected display the system will crash. See https://github.com/raspberrypi/firmware/issues/1157 for details. Signed-off-by: Fabian Vogt <fvogt@suse.com> [mb: update commit message] Signed-off-by: Matthias Brugger <mbrugger@suse.com> Reviewed-by: Andre Przywara <andre.przywara@arm.com> Tested-by: Andre Przywara <andre.przywara@arm.com>
2019-07-29rockchip: rk3188: init CPU freq in clock driverKever Yang
Init CPU frquency in clock driver instead of in SPL board file, this will help for use common board file later. Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
2019-07-29video: dw_hdmi: Add support for ddc-i2c-bus propertyNiklas Schulze
Add support for the ddc-i2c-bus device tree property which allows for using an external i2c master for reading the display's EDID. Signed-off-by: Niklas Schulze <me@jns.io>
2019-07-29video: meson: dw-hdmi: add EDID mode filtering to only select supported modesNeil Armstrong
Add support for the new mode_valid() display op to filter out unsupported display DMT timings. This is useful when connected to 4k displays, since we only support DMT monitors up to 1920x1080, the 4k native timings are discarded to select supported timings. Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
2019-07-29video: display: use edid_get_timing_validate() variant to filter supported ↵Neil Armstrong
EDID modes Introduce a new display op, mode_valid() to be used with the newly introduced edid_get_timing_validate() function, to filter supported monitor timings if handled by the display driver. Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
2019-07-29video, simple_panel: add lg,lb070wv8 displayHeiko Schocher
add "lg,lb070wv8" display to compatible node. Signed-off-by: Heiko Schocher <hs@denx.de>
2019-07-29video: mxsfb: fix mxsfb fbdev binding issuesIgor Opaniuk
Add support for display and bits-per-pixel properties. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com> Reviewed-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
2019-07-29video: fsl_dcu_fb: add DM_VIDEO supportIgor Opaniuk
Extend the driver to build with DM_VIDEO enabled. DTS files must additionally include 'u-boot,dm-pre-reloc' property in soc and child nodes to enable driver binding to fsl_dcu_fb device. Currently display timings aren't obtained from DT. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com> Reviewed-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
2019-07-29video: fsl_dcu_fb: refactor init functionsIgor Opaniuk
Move dcu-related code to fsl_dcu_probe_common, keep in video_hw_init() only legacy video stack (filling GraphicPanel struct etc.). Add wrappers for all init functions, that will let to provide struct fb_info as an additional param (needed for further moving it from the global scope to driver private data struct in DM converted driver). Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com> Reviewed-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
2019-07-27Merge branch '2019-07-26-ti-imports'Tom Rini
- Bring in the rest of the J271E platform - Various OMAP3/AM3517, DA850 fixes
2019-07-27Merge tag 'u-boot-imx-20190719' of ↵Tom Rini
https://gitlab.denx.de/u-boot/custodians/u-boot-imx u-boot-imx-20190719 - CCF for i.MX6 - nandbcb command to write SPL into NAND - Switch to DM (i.MX28) - Boards: Toradex, engicam, DH - Fixes for i.MX8 - Fixes for i.MX7ULP Travis: https://travis-ci.org/sbabic/u-boot-imx/builds/561147504
2019-07-27Merge branch 'master' of https://gitlab.denx.de/u-boot/custodians/u-boot-spiTom Rini
- fix for fsl_qspi read timeout (Thomas) - spi-mem read data size fix (Ye Li) - SiFive SPI driver, mmc_spi flags (Bhargav, Anup) - Micron spi-nor parts (Ashish) - MT7629 spi-mem driver(Weijie)
2019-07-26mmc: am654_sdhci: Separate J721E compatible into 8bit and 4bit versionsFaiz Abbas
The j721e 4 bit instances don't have a hard DLL and therefore don't need any DLL related configurations. Split the compatibles into an 8 bit and a 4 bit one. Add a private flags field which can be used to check if the DLL is present and don't register the set_ios_post callback for the 4 bit compatible instances. Also update the compatibles in k3-j721e-main.dtsi to avoid breaking boot with the new compatibles. Signed-off-by: Faiz Abbas <faiz_abbas@ti.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
2019-07-26remoteproc: k3_rproc: Rename to ti_k3_arm64_rprocLokesh Vutla
k3_rproc driver is specifically meant for controlling an arm64 core using TISCI protocol. So rename the driver, Kconfig symbol, compatible and functions accordingly. While at it drop this remoteproc selection for a53 defconfig. Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
2019-07-26remoteproc: k3_rproc: Update the driver to use ti_sci_proc helpersLokesh Vutla
Update the k3_rproc driver to use the generic ti_sci_proc helper apis which simplifies the driver a bit. Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
2019-07-26remoteproc: tisci: add TI-SCI processor control helper functionsLokesh Vutla
Texas Instruments' K3 generation SoCs has specific modules/register spaces used for configuring the various aspects of a remote processor. These include power, reset, boot vector and other configuration features specific to each compute processor present on the SoC. These registers are managed by the System Controller such as DMSC on K3 AM65x SoCs. The Texas Instrument's System Control Interface (TI-SCI) Message Protocol is used to communicate to the System Controller from various compute processors to invoke specific services provided by the firmware running on the System Controller. Add a common processor control interface header file that can be used by multiple remoteproc drivers. The helper functions within this header file abstract the various TI SCI protocol ops for the remoteproc drivers, and allow them to request the System Controller to be able to program and manage various remote processors on the SoC. The common macros required by the R5 remoteproc driver were also added. The remoteproc drivers are expected to manage the life-cycle of their ti_sci_proc_dev local structures. Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com> Signed-off-by: Suman Anna <s-anna@ti.com>
2019-07-26power: domain: ti_sci_power_domains: Add support for exclusive and shared accessLokesh Vutla
TISCI protocol supports for enabling the device either with exclusive permissions for the requesting host or with sharing across the hosts. There are certain devices which are exclusive to Linux context and there are certain devices that are shared across different host contexts. So add support for getting this information from DT by increasing the power-domain cells to 2. For keeping the DT backward compatibility intact, defaulting the device permissions to set the exclusive flag set. In this case the power-domain-cells is 1. Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
2019-07-26firmware: ti_sci: Add a command for releasing all exclusive devicesLokesh Vutla
Any host while requesting for a device can request for its exclusive access. If an exclusive permission is obtained then it is the host's responsibility to release the device before the software entity on the host completes its execution. Else any other host's request for the device will be nacked. So add a command that releases all the exclusive devices that is acquired by the current host. This should be used with utmost care and can be called only at the end of the execution. Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
2019-07-26firmware: ti_sci: Add processor shutdown API methodAndreas Dannenberg
Add and expose a new processor shutdown API that wraps the two TISCI messages involved in initiating a core shutdown. The API will first queue a message to have the DMSC wait for a certain processor boot status to happen followed by a message to trigger the actual shutdown- with both messages being sent without waiting or requesting for a response. Note that the processor shutdown API call will need to be followed up by user software placing the respective core into either WFE or WFI mode. Signed-off-by: Andreas Dannenberg <dannenberg@ti.com>
2019-07-26firmware: ti_sci: Allow for device shared and exclusive requestsLokesh Vutla
Sysfw provides an option for requesting exclusive access for a device using the flags MSG_FLAG_DEVICE_EXCLUSIVE. If this flag is not used, the device is meant to be shared across hosts. Once a device is requested from a host with this flag set, any request to this device from a different host will be nacked by sysfw. Current tisci driver enables this flag for every device requests. But this may not be true for all the devices. So provide a separate commands in driver for exclusive and shared device requests. Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
2019-07-25Merge https://gitlab.denx.de/u-boot/custodians/u-boot-netTom Rini
- DaVinci emac DM work - NXP driver work - macb updates for RISC-V
2019-07-25net: sun8i_emac: Test the correct phyEmmanuel Vadot
H3/H5 can either use the internal phy or an external one. Before getting clock and resets for the internal phy, test that we are using it because otherwise it break emac when using an external phy. Tested-on: OrangePi PC2 (H5) Fixes: 2348453c41 (net: sun8i_emac: Add EPHY CLK and RESET support) Signed-off-by: Emmanuel Vadot <manu@freebsd.org> Acked-by: Joe Hershberger <joe.hershberger@ni.com>
2019-07-25net: davinci_emac: convert to using the driver modelBartosz Golaszewski
Now that we removed all legacy boards selecting TI_EMAC we can completely convert the driver code to using the driver model. This patch also updates all remaining users of davinci_emac. Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com> Tested-by: Adam Ford <aford173@gmail.com> #am3517-evm & da850-evm Reviewed-by: Ramon Fried <rfried.dev@gmail.com>
2019-07-25net: macb: Fix check for little-endian system in gmac_configure_dma()Anup Patel
Instead of depending on CONFIG_SYS_LITTLE_ENDIAN, we check at runtime whether underlying system is little-endian or big-endian. This way we are not dependent on any U-Boot specific OR compiler specific macro to check system endianness. Signed-off-by: Anup Patel <anup.patel@wdc.com> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Ramon Fried <rfried.dev@gmail.com> Acked-by: Joe Hershberger <joe.hershberger@ni.com>
2019-07-25net: macb: Extend MACB driver for SiFive Unleashed boardAnup Patel
The SiFive MACB ethernet has a custom TX_CLK_SEL register to select different TX clock for 1000mbps vs 10/100mbps. This patch adds SiFive MACB compatible string and extends the MACB ethernet driver to change TX clock using TX_CLK_SEL register for SiFive MACB. Signed-off-by: Anup Patel <anup.patel@wdc.com> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Ramon Fried <rfried.dev@gmail.com> Acked-by: Joe Hershberger <joe.hershberger@ni.com>
2019-07-25net: tsec: Change compatible strings to match LinuxVladimir Oltean
In the case of the tsec network driver, so far there has been no mainline user of DM_ETH where the DT bindings get used. In the case of the mdio bus, it looks like the "fsl,tsec-mdio" string was made up for the documentation, but there is no mainline code that parses the "compatible" property anyway. In both cases, there are no DT blobs that contain the old strings. So change the documentation to "fsl,etsec2" for the Ethernet ports and "fsl,etsec2-mdio" for the MDIO buses, which are strings that Linux also uses, at least for LS1021A. More compatible strings can be added once other (PowerPC) SoCs are migrated to DM_ETH. The current ls1021a.dtsi doesn't match what was documented for the MDIO buses anyway (the "compatible" is "gianfar" currently). This will be fixed in the next patch. Fixes: 69a00875e3db ("doc: dt-bindings: Describe Freescale TSEC ethernet controller") Signed-off-by: Vladimir Oltean <olteanv@gmail.com> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Acked-by: Joe Hershberger <joe.hershberger@ni.com>
2019-07-25net: tsec: Common handling of MAC station address for DM_ETHVladimir Oltean
In tsec_init, the MAC address is retrieved from 2 different structures depending on whether DM_ETH is enabled or not. But since the field name is the same inside both structures, we can conditionally define the structure of the correct type and simplify the assignments. Signed-off-by: Vladimir Oltean <olteanv@gmail.com> Acked-by: Joe Hershberger <joe.hershberger@ni.com> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2019-07-25net: tsec: Make errors visibleVladimir Oltean
This replaces debug() calls with printf() so that it is immediately obvious from the console that something is wrong. Signed-off-by: Vladimir Oltean <olteanv@gmail.com> Acked-by: Joe Hershberger <joe.hershberger@ni.com> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2019-07-25net: tsec: Reverse Christmas tree notationVladimir Oltean
This is a cosmetic patch that reorders variable definitions in the inverse order of their line length, where possible. Signed-off-by: Vladimir Oltean <olteanv@gmail.com> Acked-by: Joe Hershberger <joe.hershberger@ni.com> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2019-07-25net: tsec: Fix offset of MDIO registers for DM_ETHVladimir Oltean
By convention, the eTSEC MDIO controller nodes are defined in DT at 0x2d24000 and 0x2d50000, but actually U-Boot does not touch the interrupt portion of the register map (MDIO_IEVENTM, MDIO_IMASKM, MDIO_EMAPM). That leaves only the MDIO bus registers (MDIO_MIIMCFG, MDIO_MIIMCOM, MDIO_MIIMADD, MDIO_MIIMADD, MDIO_MIIMCON, MDIO_MIIMSTAT) which start at the 0x520 offset. So shift the DT-defined register map by the offset of MDIO_MIIMCFG when mapping the MDIO bus registers. Signed-off-by: Vladimir Oltean <olteanv@gmail.com> Acked-by: Joe Hershberger <joe.hershberger@ni.com> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2019-07-25net: tsec: Refactor the readout of the tbi-handle propertyVladimir Oltean
The point of this patch is to eliminate the use of the locally-defined "reg" variable (which interferes with next patch) and simplify the fallback to the default CONFIG_SYS_TBIPA_VALUE in case "tbi-handle" is missing. Signed-off-by: Vladimir Oltean <olteanv@gmail.com> Acked-by: Joe Hershberger <joe.hershberger@ni.com> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2019-07-25net/macb: increase RX buffer size for GEMRamon Fried
Macb Ethernet controller requires a RX buffer of 128 bytes. It is highly sub-optimal for Gigabit-capable GEM that is able to use a bigger DMA buffer. Change this constant and associated macros with data stored in the private structure. RX DMA buffer size has to be multiple of 64 bytes as indicated in DMA Configuration Register specification. Signed-off-by: Ramon Fried <rfried.dev@gmail.com> Acked-by: Joe Hershberger <joe.hershberger@ni.com>
2019-07-25net: macb: apply sane DMA configurationRamon Fried
DMA configuration was heavily dependent on the HW defaults, add function to properly set the required fields, including the new dma_burst_length. Signed-off-by: Ramon Fried <rfried.dev@gmail.com> Reviewed-by: Anup Patel <anup.patel@wdc.com> Tested-by: Anup Patel <anup.patel@wdc.com> Acked-by: Joe Hershberger <joe.hershberger@ni.com>
2019-07-25net: macb: add dma_burst_length configRamon Fried
GEM support higher DMA burst writes/reads than the default (4). add configuration structure with dma burst length so it could be applied later to DMA configuration. Signed-off-by: Ramon Fried <rfried.dev@gmail.com> Reviewed-by: Anup Patel <anup.patel@wdc.com> Tested-by: Anup Patel <anup.patel@wdc.com> Acked-by: Joe Hershberger <joe.hershberger@ni.com>
2019-07-25net: macb: add support for SGMII phy interfaceRamon Fried
This patch adds support for the sgmii phy interface, available only to DM users, dictated by current driver design. Signed-off-by: Ramon Fried <rfried.dev@gmail.com> Reviewed-by: Anup Patel <anup.patel@wdc.com> Tested-by: Anup Patel <anup.patel@wdc.com> Acked-by: Joe Hershberger <joe.hershberger@ni.com>
2019-07-25net: macb: use bit access macro from header fileRamon Fried
macb.h provides macros for reading/setting bitfields, in macb registers and descriptors. use that instead of redefining them in the source file. Signed-off-by: Ramon Fried <rfried.dev@gmail.com> Reviewed-by: Anup Patel <anup.patel@wdc.com> Tested-by: Anup Patel <anup.patel@wdc.com> Acked-by: Joe Hershberger <joe.hershberger@ni.com>
generated by cgit (git 2.34.1) at 2024-12-29 10:08:14 +0000