summaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)Author
2013-03-24mmc: mmc_getcd/getwp: use sensible defaultsPeter Korsgaard
Let mmc_getcd() return true and mmc_getwp() false if mmc driver doesn't provide handlers for them. Signed-off-by: Peter Korsgaard <peter.korsgaard@barco.com> [trini: Add braces around first if test in each case to fix warning] Signed-off-by: Tom Rini <trini@ti.com>
2013-03-24ns16550: enable quirks for ti814xMatt Porter
TI814X requires the same quirks as AM33XX to be enabled. Signed-off-by: Matt Porter <mporter@ti.com> Reviewed-by: Tom Rini <trini@ti.com>
2013-03-24am33xx: Add required includes to some omap/am33xx codeTom Rini
- In arch/arm/cpu/armv7/omap-common/timer.c, drivers/mtd/nand/omap_gpmc.c and drivers/net/cpsw.c add #include files that the driver needs but had been relying on <config.h> to bring in. - In arch/arm/cpu/armv7/omap-common/lowlevel_init.S add <config.h> - In am335x_evm.h and pcm051.h don't globally include <asm/arch/hardware.h> and <asm/arch/cpu.h> but just <asm/arch/omap.h> as that is the only include which defines things the config uses. Cc: Lars Poeschel <poeschel@lemonage.de> Signed-off-by: Tom Rini <trini@ti.com>
2013-03-20mmc: add bcm2835 driverStephen Warren
This adds a simple driver for the BCM2835's SD controller. Workarounds are implemented for: * Register writes can't be too close to each-other in time, or they will be lost. * Register accesses must all be 32-bit, so implement custom accessors. This code was extracted from: git://github.com/gonzoua/u-boot-pi.git master which was created by Oleksandr Tymoshenko. Portions of the code there were obviously based on the Linux kernel at: git://github.com/raspberrypi/linux.git rpi-3.6.y commit f5b930b "Main bcm2708 linux port" signed-off-by Dom Cobley. swarren changed the following for upstream: * Removed hack udelay()s in bcm2835_sdhci_raw_writel(); setting SDHCI_QUIRK_WAIT_SEND_CMD appears to solve the issues. * Remove register logging from read*/write* functions. * Sort out confusion with min/max_freq values passed to add_sdhci(). * Use more descriptive variable names and calculations in IO accessors. * Simplified and commented twoticks_delay calculation. * checkpatch fixes. Cc: Andy Fleming <afleming@gmail.com> Signed-off-by: Oleksandr Tymoshenko <gonzo@bluezbox.com> Signed-off-by: Stephen Warren <swarren@wwwdotorg.org> Acked-by: Andy Fleming <afleming@gmail.com>
2013-03-20video: add a driver for the bcm2835Stephen Warren
The firmware running on the bcm2835 SoC's VideoCore CPU manages the display controller. Add a simple "LCD" driver that communicates with the firmware using the property mailbox protocol. This configures the display and frame-buffer to match whatever physical resolution the firmware chosen when booting, which is typically the native resolution of the attached display device, presumably unless otherwise specified in config.txt on the boot media. Enable this driver in the Raspberry Pi board configuration. Signed-off-by: Stephen Warren <swarren@wwwdotorg.org> Acked-by: Anatolij Gustschin <agust@denx.de>
2013-03-18Merge branch 'master' of git://git.denx.de/u-boot-usbTom Rini
2013-03-18Merge branch 'master' of git://git.denx.de/u-boot-armTom Rini
Albert's rework of the linker scripts conflicted with Simon's making everyone use __bss_end. We also had a minor conflict over README.scrapyard being added to in mainline and enhanced in u-boot-arm/master with proper formatting. Conflicts: arch/arm/cpu/ixp/u-boot.lds arch/arm/cpu/u-boot.lds arch/arm/lib/Makefile board/actux1/u-boot.lds board/actux2/u-boot.lds board/actux3/u-boot.lds board/dvlhost/u-boot.lds board/freescale/mx31ads/u-boot.lds doc/README.scrapyard include/configs/tegra-common.h Build tested for all of ARM and run-time tested on am335x_evm. Signed-off-by: Tom Rini <trini@ti.com>
2013-03-18usb: Add multiple controllers support for EHCI PCIVincent Palatin
Use the ability to have several active EHCI controller on a system in the PCI EHCI controller implementation. Signed-off-by: Simon Glass <sjg@chromium.org>
2013-03-18usb: usbeth: smsc95xx: remove EEPROM loaded checkMichael Spang
[port of Linux kernel commit bcd218be5aeb by Steve Glendinning] The eeprom read & write commands currently check the E2P_CMD_LOADED_ bit is set before allowing any operations. This prevents any reading or writing unless a correctly programmed EEPROM is installed. Signed-off-by: Michael Spang <spang@chromium.org> Signed-off-by: Simon Glass <sjg@chromium.org> Acked-by: Marek Vasut <marex@denx.de>
2013-03-18usb: ehci: Fix aliasing issue in EHCI interrupt codeVincent Palatin
The interrupt endpoint handling code stores the buffer pointer in the QH padding field. We need to make it the size of a pointer to avoid strict aliasing issue with the compiler. Signed-off-by: Vincent Palatin <vpalatin@chromium.org> Signed-off-by: Simon Glass <sjg@chromium.org>
2013-03-18usb: ehci: Support interrupt transfers via periodic listPatrick Georgi
Interrupt transfers aren't meant to be used from the async list (the EHCI spec indicates trouble with low/full-speed intr on async). Build a periodic list instead, and provide an API to make use of it. Then, use that API from the existing interrupt transfer API. This provides support for USB keyboards using EHCI. Use timeouts to ensure we cannot get stuck in the keyboard scanning if something wrong happens (USB device unplugged or fatal I/O error) Signed-off-by: Vincent Palatin <vpalatin@chromium.org> Signed-off-by: Julius Werner <jwerner@chromium.org> Signed-off-by: Simon Glass <sjg@chromium.org>
2013-03-18usb: ehci: exynos: Enable non-dt pathVivek Gautam
Enabling the non-dt path for the driver so that we don't get any build errors for non-dt configuration. Signed-off-by: Vivek Gautam <gautam.vivek@samsung.com> Acked-by: Simon Glass <sjg@chromium.org>
2013-03-18usb: ehci: exynos: Fix multiple FDT decodeVivek Gautam
With current FDT support driver tries to parse device node twice in ehci_hcd_init() and ehci_hcd_stop(), which shouldn't happen ideally. Making provision to store data in a global structure and thereby passing its pointer when needed. Signed-off-by: Vivek Gautam <gautam.vivek@samsung.com>
2013-03-18usb:gadget: USB Mass Storage Gadget supportLukasz Majewski
This patch adds the USB Mass Storage Gadget to u-boot New command called "ums" is implemented to provide access to on-device embedded persistent memory. USB Mass Storage is supposed to work on top of the USB Gadget framework Signed-off-by: Lukasz Majewski <l.majewski@samsung.com> Signed-off-by: Piotr Wilczek <p.wilczek@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> CC: Marek Vasut <marek.vasut@gmail.com>
2013-03-18usb:composite: USB Mass Storage - f_mass_storage.c from Linux kernelPiotr Wilczek
The f_mass_storage.c source file from v2.6.36 Linux kernel. commit 8876f5e7d3b2a320777dd4f6f5301d474c97a06c Author: Michal Nazarewicz <m.nazarewicz@samsung.com> Date: Mon Jun 21 13:57:09 2010 +0200 USB: gadget: f_mass_storage: added eject callback Signed-off-by: Lukasz Majewski <l.majewski@samsung.com> Signed-off-by: Piotr Wilczek <p.wilczek@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> CC: Marek Vasut <marek.vasut@gmail.com>
2013-03-18usb:composite: USB Mass Storage - storage_common.c from Linux kernelLukasz Majewski
The storage_common.c source file from v2.6.36 Linux kernel. commit d26a6aa08b9f12b44fb1ee65625e7480d3d5bb81 Author: Michal Nazarewicz <m.nazarewicz@samsung.com> Date: Mon Nov 9 14:15:23 2009 +0100 USB: g_mass_storage: code cleaned up and comments updated Signed-off-by: Lukasz Majewski <l.majewski@samsung.com> Signed-off-by: Andrzej Pietrasiewicz <andrzej.p@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> CC: Marek Vasut <marek.vasut@gmail.com>
2013-03-18usb:composite:fix Provide function data when addressing device with only one ↵Lukasz Majewski
interface This commit fixes problems with some non-standard requests send with device address instead of interface address (bmRequestType.Receipent field). This happens with dfu-util (debian version: 0.5), which address non standard requests (like w_value=0x21 and bRequest=GET_DESCRIPTOR) to device. Without this fix, the above request is STALLED, and hence causes dfu-util to assume some standard configuration (packet size = 1024B instead of 4096B) In turn it displays following errors: Error obtaining DFU functional descriptor Warning: Assuming DFU version 1.0 Warning: Transfer size can not be detected ... Warning: Trying default transfer size 1024 This fix allows passing non-standard request to function setup code, where it shall be handled. Tested at: Trats (exynos4210) Tested with:DFU and UMS gadgets Signed-off-by: Lukasz Majewski <l.majewski@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
2013-03-16usbtty: adapt buffers for large packet supportShiraz Hashim
Increase buffer sizes at driver and tty level to accommodate kermit large packet support. Signed-off-by: Shiraz Hashim <shiraz.hashim@st.com>
2013-03-16usb/host/ehci: Add support for EHCI on spearVipin Kumar
Add EHCI support for spear boards Signed-off-by: Armando Visconti <armando.visconti@st.com> Signed-off-by: Vipin Kumar <vipin.kumar@st.com>
2013-03-16usb: Fix bug when both DFU & ETHER are definedPantelis Antoniou
When both CONFIG_USB_GADGET & CONFIG_USB_ETHER are defined the makefile links objects twice. This patch uses a Makefile specific idiom of 'if defined(CONFIG_USB_GADGET) || defined(CONFIG_USB_ETHER)' to handle the case. Signed-off-by: Pantelis Antoniou <panto@antoniou-consulting.com>
2013-03-16dfu: Add a partition type targetPantelis Antoniou
Dealing with raw block numbers with the dfu is very annoying. Introduce a partition method. Signed-off-by: Pantelis Antoniou <panto@antoniou-consulting.com>
2013-03-16dfu: Properly zero out timeout valuePantelis Antoniou
Zero out timeout value; letting it filled with undefined values ends up with the dfu host hanging. Signed-off-by: Pantelis Antoniou <panto@antoniou-consulting.com>
2013-03-16usb: ehci: Add 64-bit controller supportVincent Palatin
On EHCI controller with 64-bit address space support, we must initialize properly the high word for the PCI bus master accesses. Signed-off-by: Vincent Palatin <vpalatin@chromium.org> Signed-off-by: Simon Glass <sjg@chromium.org>
2013-03-16usb: ehci: generic PCI supportVincent Palatin
Instead of hardcoding the PCI IDs on the USB controller, use the PCI class to detect them. Ensure the busmaster bit is properly set in the PCI configuration. Signed-off-by: Simon Glass <sjg@chromium.org>
2013-03-15serial: ns16550: Remove unwanted castSimon Glass
This cast does not seem correct, since we should be writing to a pointer, not a ulong. This fixes the following warning on nds32: -ns16550.c:49: warning: passing argument 2 of 'writeb' makes pointer from integer without a cast Signed-off-by: Simon Glass <sjg@chromium.org>
2013-03-15Merge branch 'u-boot-tegra/master' into 'u-boot-arm/master'Albert ARIBAUD
2013-03-15Merge branch 'u-boot-imx/master' into 'u-boot-arm/master'Albert ARIBAUD
2013-03-14mmc: Tegra: Add SD bus power/voltage function and MMC pad init call.Tom Warren
Tegra30 requires the SD Bus Voltage & Power bits be set in the SD Power Control register. Tegra20 works w/o them set, but do it anyway for those SoCs as it's part of the SD spec. Also call a common board pad init routine (pad_init_mmc) in mmc_reset(), used by Tegra30 only for now. Note that Tegra20 SD/MMC HW differs enough from Tegra20 that a new compatible entry is used in the fdt compat_names/id tables. Signed-off-by: Tom Warren <twarren@nvidia.com> Reviewed-by: Stephen Warren <swarren@nvidia.com>
2013-03-14Tegra: MMC: Add DT support to MMC driver for all T20 boardsTom Warren
tegra_mmc_init() now parses the DT info for bus width, WP/CD GPIOs, etc. Tested on Seaboard, fully functional. Tamonten boards (medcom-wide, plutux, and tec) use a different/new dtsi file w/common settings. Signed-off-by: Tom Warren <twarren@nvidia.com> Signed-off-by: Thierry Reding <thierry.reding@avionic-design.de> Reviewed-by: Stephen Warren <swarren@nvidia.com>
2013-03-14Tegra: I2C: Add T114 clock support to tegra_i2c driverTom Warren
T114 has a slightly different I2C clock, with a new (extra) divisor in standard/fast mode and HS mode. Tested on my Dalmore, and the I2C clock is 100KHz +/- 3Hz on my Saleae Logic analyzer. Added a new entry in compat_names for T114 I2C since it differs from the previous Tegra SoCs. A flag is set when T114 I2C HW is found so new features like the extra clock divisor can be used. Signed-off-by: Tom Warren <twarren@nvidia.com> Acked-by: Laxman Dewangan <ldewangan@nvidia.com>
2013-03-14tegra: usb: move [start|stop]_port into ehci_hcd_[init|stop]Lucas Stach
The ehci_hcd entry points were just calling into the Tegra USB functions. Now that they are in the same file we can just move over the implementation. Signed-off-by: Lucas Stach <dev@lynxeye.de> Acked-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Warren <twarren@nvidia.com>
2013-03-14tegra: usb: move implementation into right directoryLucas Stach
This moves the Tegra USB implementation into the drivers/usb/host directory. Note that this merges the old /arch/arm/cpu/armv7/tegra20/usb.c file into ehci-tegra.c. No code changes, just moving stuff around. v2: While at it also move some defines and the usb.h header file to make usb driver usable for Tegra30. NOTE: A lot more work is required to properly init the PHYs and PLL_U on Tegra30, this is just to make porting easier and it does no harm here. Signed-off-by: Lucas Stach <dev@lynxeye.de> Acked-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Warren <twarren@nvidia.com>
2013-03-12I2C: S3C24X0: Bug fixes in i2c_transferRajeshwari Shinde
This patch corrects the following issues 1) Write the correct M/T Stop value to I2CSTAT after i2c write. According to the spec, after finish the data transmission, we should write a M/T Stop (I2C_MODE_MT | I2C_TXRX_ENA) to I2CSTAT instead of a M/R Stop (I2C_MODE_MR | I2C_TXRX_ENA). 2) Not split the write to I2CSTAT into 2 steps in i2c read. According to the spec, we should write the combined M/R Start value to I2CSTAT after setting the slave address to I2CDS 3) Fix the mistake of making an equality check to an assignment. In the case of I2C write with the zero-length address, while tranfering the data, it should be an equality check (==) instead of an assignment (=). Signed-off-by: Tom Wai-Hong Tam <waihong@chromium.org> Signed-off-by: Rajeshwari Shinde <rajeshwari.s@samsung.com>
2013-03-12I2C: S3C24X0: Remove the dead codeRajeshwari Shinde
This revomes the code under #if 0 in the s3c24x0_i2c driver. Signed-off-by: Alim Akhtar <alim.akhtar@samsung.com> Signed-off-by: Rajeshwari Shinde <rajeshwari.s@samsung.com> Acked-by: Simon Glass <sjg@chromium.org>
2013-03-11mvsata_ide.c: Correction of typo in commentsGray Remlin
Signed-off-by: Gray Remlin <gryrmln@gmail.com>
2013-03-11ppc: Remove PCIPPC2 and PCIPPC6 boardsStefan Roese
These boards seem to be unmaintained for quite some time. So lets remove support for them completely. This also cleans up some common drivers/files. Signed-off-by: Stefan Roese <sr@denx.de> Cc: Guillaume Alexandre <guillaume.alexandre@gespac.ch> Acked-by: Wolfgang Denk <wd@denx.de>
2013-03-11Merge u-boot/master into u-boot-ti/masterTom Rini
In master we had already taken a patch to fix the davinci GPIO code for CONFIG_SOC_DM646X and in u-boot-ti we have additional patches to support DA830 (which is CONFIG_SOC_DA8XX && !CONFIG_SOC_DA850). Resolve these conflicts manually and comment the #else/#endif lines for clarity. Conflicts: arch/arm/include/asm/arch-davinci/gpio.h drivers/gpio/da8xx_gpio.c Signed-off-by: Tom Rini <trini@ti.com>
2013-03-11ARM: OMAP4+: Make control module register structure genericLokesh Vutla
A seperate omap_sys_ctrl_regs structure is defined for omap4 & 5. If there is any change in control module for any of the ES versions, a new structure needs to be created. In order to remove this dependency, making the register structure generic for all the omap4+ boards. Signed-off-by: R Sricharan <r.sricharan@ti.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com> Reviewed-by: Tom Rini <trini@ti.com>
2013-03-11am335x: cpsw: optimize cpsw_send to increase network performanceMugunthan V N
Before submitting packets to cpdma, phy status is updated on every packet which leads to delay in packet send intern reduces the Ethernet performance. Checking mdio status for each packet will reduce timetaken to send a packet and there by increasing the Ethernet performance. With this the performance is increased from 208KiB/s to 375KiB/s on EVMsk Signed-off-by: Mugunthan V N <mugunthanvnm@ti.com>
2013-03-08SPL: ONENAND: Fix onenand_spl_load_image implementation.Enric Balletbo i Serra
Tested with an IGEPv2 board seems that current onenand_spl_load_image implementation doesn't work. This patch fixes this function changing the read loop and reading the onenand blocks from page to page. Tested with various IGEP based boards with a OneNAND from Numonyx. Signed-off-by: Enric Balletbo i Serra <eballetbo@iseebcn.com>
2013-03-08omap3: allow dynamic selection of gfx_formatNikita Kiryanov
Currently, omap3_dss_panel_config() sets gfx_format to a value that is hardcoded in the code. This forces anyone who wants to use a different gfx_format to make adjustments after calling omap3_dss_panel_config(). This could be avoided if the value of gfx_format were parameterized as input for omap3_dss_panel_config(). Make gfx_format a field in struct panel_config, and update existing structs to set this field to the value that was originally hard coded. Cc: Wolfgang Denk <wd@denx.de> Cc: Jeroen Hofstee <jeroen@myspectrum.nl> Cc: Tom Rini <trini@ti.com> Cc: Anatolij Gustschin <agust@denx.de> Signed-off-by: Nikita Kiryanov <nikita@compulab.co.il> Signed-off-by: Igor Grinberg <grinberg@compulab.co.il>
2013-03-08omap_hsmmc: add driver check for write protectionNikita Kiryanov
Add check for write protection in omap mmc driver. Signed-off-by: Nikita Kiryanov <nikita@compulab.co.il> Signed-off-by: Igor Grinberg <grinberg@compulab.co.il> Reviewed-by: Tom Rini <trini@ti.com>
2013-03-08mmc: add support for write protectionNikita Kiryanov
Add generic mmc write protection functionality. Signed-off-by: Nikita Kiryanov <nikita@compulab.co.il> Signed-off-by: Igor Grinberg <grinberg@compulab.co.il>
2013-03-08omap_hsmmc: implement driver check for card detectionNikita Kiryanov
Implement driver check for card detection. Signed-off-by: Nikita Kiryanov <nikita@compulab.co.il> Signed-off-by: Igor Grinberg <grinberg@compulab.co.il>
2013-03-08omap_hsmmc: introduce omap_hsmmc_data structNikita Kiryanov
Currently there's no appropriate place to store driver specific data because the pointer that is meant for that (priv) is being used to store the base address of mmc registers. Introduce a new struct for storing driver specific data. Signed-off-by: Nikita Kiryanov <nikita@compulab.co.il>
2013-03-08omap_hsmmc: fix out of bounds array accessNikita Kiryanov
There are 3 MMC/SD/SDIO controllers in OMAP SoCs, but only 2 structs are defined for devices. This leads to data being written outside of array bounds on systems that use all 3 controllers. Update hsmmc_dev array to the correct size. Signed-off-by: Nikita Kiryanov <nikita@compulab.co.il>
2013-03-07mxs: Make ehci-mxs multiport capableMarek Vasut
Rework ehci-mxs so it supports both ports on MX28. It was necessary to wrap the per-port configuration into struct ehci_mxs_port and pull out the clock configuration function. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@freescale.com> Cc: Otavio Salvador <otavio@ossystems.com.br> Cc: Stefano Babic <sbabic@denx.de>
2013-03-07mxs: Squash the header file usage in ehci-mxsMarek Vasut
The ehci-mxs driver included the register definitions directly. Use imx-regs.h instead since it contains proper handling of the differences between mx23 and mx28. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@freescale.com> Cc: Otavio Salvador <otavio@ossystems.com.br> Cc: Stefano Babic <sbabic@denx.de> Acked-by: Otavio Salvador <otavio@ossystems.com.br>
2013-03-07mxs: spi: Remove CONFIG_MXS_SPI_DMA_ENABLEMarek Vasut
The CONFIG_MXS_SPI_DMA_ENABLE is no longer relevant as the SPI DMA has proven to work correctly. Remove this configuration option. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@freescale.com> Cc: Otavio Salvador <otavio@ossystems.com.br> Cc: Stefano Babic <sbabic@denx.de>
2013-03-07mxs: spi: Fix the MXS SPI for mx23Marek Vasut
The MX23 has slightly different register layout. Adjust the SPI driver to match the layout, both the PIO and DMA part. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@freescale.com> Cc: Otavio Salvador <otavio@ossystems.com.br> Cc: Stefano Babic <sbabic@denx.de>
generated by cgit (git 2.34.1) at 2024-12-27 22:50:18 +0000