summaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)Author
2019-08-08Merge https://gitlab.denx.de/u-boot/custodians/u-boot-marvellTom Rini
- Remove unused bcm2835 watchdog driver (still non-DM) - Cosmetic fixup of mtk_wdt.c
2019-08-07pci_ep: Fix Coverity warningRamon Fried
Fix the following Coverity warning: CID 244086: Incorrect expression (BAD_COMPARE) Comparing pointer "ep_bar" against NULL using anything besides == or is likely to be incorrect. Fixes: 914026d25848 ("drivers: pci_ep: Introduce UCLASS_PCI_EP uclass") Signed-off-by: Ramon Fried <rfried.dev@gmail.com>
2019-08-07clk: MediaTek: add hifsys entry for MT7623 SoC.Ryder Lee
This adds high speed interface subsystem - hifsys (i.e. PCIe and USB) for MT7623 SoC and enables its reset controller. The control block is shared with ethsys and accordingly rename the related defines. Tested-by: Frank Wunderlich <frank-w@public-files.de> Signed-off-by: Ryder Lee <ryder.lee@mediatek.com>
2019-08-05watchdog: mtk_wdt: Cosmetic cleanup of latest changesStefan Roese
This patch cleans up some coding style related issues in the mtk_wtd driver to make this driver comply again with the U-Boot coding style standards. The only minimal functional change is that the timeout parameter is now passed in (u64) instead of (unsigned int) from mtk_wdt_start() to mtk_wdt_set_timeout(), preserving the original value. Signed-off-by: Stefan Roese <sr@denx.de> Cc: Shannon Barber <sbarber@dataspeedinc.com> Cc: Ryder Lee <ryder.lee@mediatek.com> Cc: Matthias Brugger <matthias.bgg@gmail.com> Cc: Frank Wunderlich <frank-w@public-files.de> Reviewed-by: Matthias Brugger <matthias.bgg@gmail.com>
2019-08-05watchdog: bcm2835_wdt: Remove unused BCM283x watchdog driver and its referencesStefan Roese
The BCM2835/2836 watchdog is not used in mainline U-Boot at all. This patch removes the driver and its references (CONFIG_BCM2835_WDT) completely. Signed-off-by: Stefan Roese <sr@denx.de> Cc: Paolo Pisati <p.pisati@gmail.com>
2019-08-02Merge https://gitlab.denx.de/u-boot/custodians/u-boot-clkTom Rini
- Port more CCF code to work with i.MX8 devices.
2019-07-31Merge tag 'u-boot-amlogic-20190731' of ↵Tom Rini
https://gitlab.denx.de/u-boot/custodians/u-boot-amlogic - sync Amlogic G12A DT with linux 5.3-rc1 - add support for 4GiB DRAM memory - add support for Amlogic G12B based Odroid-N2 - small duplicate logic fix for gxbb clock driver
2019-07-31Merge branch '2019-07-31-ti-imports'Tom Rini
- Various DaVinci fixes - Migrate am335x_boneblack_vboot to use more DM drivers - Keystone updates
2019-07-31nand: davinci: avoid out of bounds array accessHeinrich Schuchardt
The array bounds have to be checked before accessing the array element. Identified by cppcheck. Fixes: 67ac6ffaeefb ("mtd: nand: davinci: add opportunity to write keystone U-boot image") Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2019-07-31Merge tag 'mmc-7-31' of https://gitlab.denx.de/u-boot/custodians/u-boot-mmcTom Rini
A new mmc/sd block test case Bug fixes for sdhci and mv_sdhci
2019-07-31clk: meson: remove duplicate logicHeinrich Schuchardt
First thing we check in meson_clk_set_rate_by_id() is current_rate == rate. There is not need to check it again. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de> Acked-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
2019-07-31mmc: relocate code commentBaruch Siach
The comment about init op being NULL used to be next to the NULL check code. Commit 8ca51e51c182 ("dm: mmc: Add a way to use driver model for MMC operations") separated the comment from the code. Put them back together. Fixes: 8ca51e51c182 ("dm: mmc: Add a way to use driver model for MMC operations") Signed-off-by: Baruch Siach <baruch@tkos.co.il> Reviewed-by: Peng Fan <peng.fan@nxp.com>
2019-07-31mmc: mtk-sd: add WATCHDOG_RESET() to prevent watchdog timeoutWeijie Gao
When reading large data in once (reading 512MiB is tested on MT7623), a watchdog timeout is triggered due to watchdog not being fed. This patch adds WATCHDOG_RESET() to msdc_start_data() so the watchdog will be fed every 1024 blocks are read/written. Signed-off-by: Weijie Gao <weijie.gao@mediatek.com>
2019-07-31mmc: sdhci: fix chip detect gpio property nameBaruch Siach
The standard property name for chip-detect gpio is "cd-gpios". All in-tree DT files use only this name. Fixes: 451931ea700 ("mmc: sdhci: Read cd-gpio from devicetree") Cc: T Karthik Reddy <t.karthik.reddy@xilinx.com> Cc: Michal Simek <michal.simek@xilinx.com> Signed-off-by: Baruch Siach <baruch@tkos.co.il> Reviewed-by: Peng Fan <peng.fan@nxp.com>
2019-07-31mmc: mv_sdhci: fix uninitialized pointer deref on probeBaruch Siach
Since commit 3d296365e4e8 ("mmc: sdhci: Add support for sdhci-caps-mask") sdhci_setup_cfg() expects a valid sdhci_host mmc field. Move the mmc field initialization before sdhci_setup_cfg() call to avoid crash on mmc pointer dereference. Fixes: 3d296365e4e8 ("mmc: sdhci: Add support for sdhci-caps-mask") Cc: Faiz Abbas <faiz_abbas@ti.com> Signed-off-by: Baruch Siach <baruch@tkos.co.il>
2019-07-31clk: sandbox: add composite clkPeng Fan
Add composite clk to sandbox driver Signed-off-by: Peng Fan <peng.fan@nxp.com>
2019-07-31clk: gate: support sandboxPeng Fan
Introduce io_gate_val for sandbox clk gate test usage Signed-off-by: Peng Fan <peng.fan@nxp.com>
2019-07-31clk: add composite clk supportPeng Fan
Import clk composite clk support from Linux Kernel 5.1-rc5 Signed-off-by: Peng Fan <peng.fan@nxp.com>
2019-07-31dm: clk: ignore default settings when node not validPeng Fan
When the device not binded with a node, we need ignore the parents and rate settings. Cc: Simon Glass <sjg@chromium.org> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Philipp Tomsich <philipp.tomsich@theobroma-systems.com> Cc: Neil Armstrong <narmstrong@baylibre.com> Cc: Andreas Dannenberg <dannenberg@ti.com> Signed-off-by: Peng Fan <peng.fan@nxp.com>
2019-07-31clk: imx: gate2 add set ratePeng Fan
Add set rate for imx clk-gate2 Signed-off-by: Peng Fan <peng.fan@nxp.com>
2019-07-31clk: imx: import clk heplersPeng Fan
Import some clk helpers from Linux Kernel for i.MX8MM usage Signed-off-by: Peng Fan <peng.fan@nxp.com>
2019-07-31clk: fixed_rate: export clk_fixed_ratePeng Fan
Export the structure for others to use. Signed-off-by: Peng Fan <peng.fan@nxp.com>
2019-07-31clk: divider set rate supporrtPeng Fan
Signed-off-by: Peng Fan <peng.fan@nxp.com>
2019-07-31clk: add clk-gate supportPeng Fan
Import clk-gate support from Linux Kernel 5.1-rc5 Signed-off-by: Peng Fan <peng.fan@nxp.com>
2019-07-31clk: mux: add set parent supportPeng Fan
Add set parent support for clk mux Signed-off-by: Peng Fan <peng.fan@nxp.com>
2019-07-31clk: use clk_dev_bindedPeng Fan
Preparing to support composite clk. Signed-off-by: Peng Fan <peng.fan@nxp.com>
2019-07-31clk: introduce clk_dev_bindedPeng Fan
When support Clock Common Framework, U-Boot use dev for clk tree information, there is no clk->parent. When support composite clk, it contains mux/gate/divider, but the mux/gate/divider is not binded with device. So we could not use dev_get_uclass_priv to get the correct clk_mux/gate/divider. So add clk_dev_binded to let choose the correct method. Signed-off-by: Peng Fan <peng.fan@nxp.com>
2019-07-30Merge tag 'video-for-2019.10-rc1' of ↵Tom Rini
https://gitlab.denx.de/u-boot/custodians/u-boot-video - fix EDID mode filtering - extend mxc_ipuv3_fb to enable backlight/display - include fb_base in global_data for DM_VIDEO - show frame buffer address via board info as used to be with legacy VIDEO support
2019-07-30Merge tag 'xilinx-for-v2019.10' of ↵Tom Rini
https://gitlab.denx.de/u-boot/custodians/u-boot-microblaze Xilinx/FPGA changes for v2019.10 fpga: - Xilinx virtex2 cleanup - Altera cyclon2 cleanup zynq: - Minor Kconfig cleanup - Add psu_init configuration for Z-turn board zynqmp: - Add support for pmufw config passing to PMU - script for psu_init conversion - zcu1275 renaming xilinx: - Add support for UltraZed-EV SoM
2019-07-30Merge branch 'master' of git://git.denx.de/u-boot-shTom Rini
2019-07-30mxc_ipuv3_fb.c: enable a backlight on a panelHeiko Schocher
check if we get a panel device, if so, enable the backlight on it. Signed-off-by: Heiko Schocher <hs@denx.de>
2019-07-30mxc_ipuv3_fb.c: call display_enableHeiko Schocher
call display_enable, so a display gets enabled. Signed-off-by: Heiko Schocher <hs@denx.de>
2019-07-30mxc_ipuv3_fb.c: set gd->fb_baseHeiko Schocher
set gd->fb_base so it can be shown with bdinfo command. Signed-off-by: Heiko Schocher <hs@denx.de>
2019-07-30fpga: altera: cyclon2: Check function pointer before callingAlexander Dahl
As already done for the 'pre' function, a check is added to not follow a NULL pointer, if somebody has not assigned a 'post' function. Signed-off-by: Alexander Dahl <ada@thorsis.com>
2019-07-30fpga: altera: cyclon2: Fix indentationAlexander Dahl
Some code parts stood too far left … Signed-off-by: Alexander Dahl <ada@thorsis.com>
2019-07-30fpga: altera: cyclon2: Fix most checkpatch warningsAlexander Dahl
Nothing special, but done before further cleanup. * spacing * braces * __FUNCTION__ → __func__ Suggested-by: Michal Simek <michal.simek@xilinx.com> Signed-off-by: Alexander Dahl <ada@thorsis.com>
2019-07-30fpga: virtex2: Add slave serial programming supportRobert Hancock
This adds support for slave serial programming, in addition to the previously supported slave SelectMAP mode. There are two ways that this can be used: -Using the clk and wdata callbacks in order to write image data one bit at a time using pure bit-banging. This works, but is rather painfully slow with typical image sizes. -By specifying the wbulkdata callback instead, the image loading process can be offloaded to SPI hardware. In this mode the clk and wdata callbacks do not need to be specified. This allows the image to be loaded much faster, taking only a few seconds with even relatively large images. Slave serial programming has been tested on the Kintex-7 series of FPGAs. Signed-off-by: Robert Hancock <hancock@sedsystems.ca> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2019-07-30fpga: virtex2: Add additional clock cycles after DONE assertionRobert Hancock
Some Xilinx FPGA configuration options can result in the startup sequence extending past the end of the FPGA bitstream. Continue applying CCLK clock cycles for 8 cycles after DONE is asserted in order to ensure the startup sequence is complete, as recommended by Xilinx. Signed-off-by: Robert Hancock <hancock@sedsystems.ca> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2019-07-30fpga: virtex2: Split out image writing from pre/post operationsRobert Hancock
This is in preparation for adding slave serial programming support, which uses the same pre/post operations as slave SelectMAP, to avoid duplicating code. Signed-off-by: Robert Hancock <hancock@sedsystems.ca> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2019-07-30fpga: virtex2: added Kconfig optionRobert Hancock
Add an option to allow this driver to be selected with Kconfig. As noted in the description, this driver should also work with many newer Xilinx FPGA families as the programming methods are essentially the same. Also added a missing FPGA_XILINX dependency to the similar Spartan 3 driver. Signed-off-by: Robert Hancock <hancock@sedsystems.ca> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2019-07-30fpga: virtex2: cosmetic: Cleanup code styleRobert Hancock
Address Checkpatch warnings in virtex2 code prior to making other changes. No functional change intended. Signed-off-by: Robert Hancock <hancock@sedsystems.ca> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2019-07-29Merge branch '2019-07-29-ti-imports'Tom Rini
- More DaVinci DM migration, drop am18xx EVM platform - Keystone bug fix
2019-07-29nand: davinci: add support for driver modelBartosz Golaszewski
Extend the davinci NAND driver to support the driver model. For now this doesn't add any device-tree parsing due to the fact that we can't access the actual nand node on the device-tree - it's a subnode of the aemif device and we don't have an aemif driver on davinci at the moment. Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
2019-07-29nand: davinci: make davinci_nand_init() staticBartosz Golaszewski
This function is only used within the driver itself. No need to export it. Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
2019-07-29i2c: remove i2c driver-model compatibility layerBartosz Golaszewski
There are no more users of the compatibility layer for i2c. Remove the driver and all references to it. Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com> Acked-by: Heiko Schocher <hs@denx.de>
2019-07-29Merge branch '2019-07-29-master-imports'Tom Rini
- Assorted bug fixes
2019-07-29rtc, rx8025: add DM supportHeiko Schocher
add DM support for this RTC driver. Signed-off-by: Heiko Schocher <hs@denx.de>
2019-07-29rtc, rx8025: fix Coding StyleHeiko Schocher
fix Coding Style for this driver. Signed-off-by: Heiko Schocher <hs@denx.de>
2019-07-29rtc: move RTC_RX8025 to KconfigHeiko Schocher
move RTC_RX8025 to Kconfig and fixup board configs. Signed-off-by: Heiko Schocher <hs@denx.de>
2019-07-29pinctrl: mediatek: fix warningFabien Parent
Fix the following warning when CONFIG_PINCONF=n: drivers/pinctrl/mediatek/pinctrl-mtk-common.c:35:36: warning: ‘mtk_drive’ defined but not used [-Wunused-const-variable=] static const struct mtk_drive_desc mtk_drive[] = { ^~~~~~~~~ Signed-off-by: Fabien Parent <fparent@baylibre.com>
generated by cgit (git 2.34.1) at 2024-12-27 06:06:10 +0000