summaryrefslogtreecommitdiff
path: root/arch/powerpc/cpu
diff options
context:
space:
mode:
authorYork Sun <yorksun@freescale.com>2013-09-30 09:22:09 -0700
committerYork Sun <yorksun@freescale.com>2013-11-25 11:43:43 -0800
commit5614e71b4956c579cd4419b958b33fa6316eaa92 (patch)
treef75d1d531814dbbe0ff9d65f28cc050a73a8f7de /arch/powerpc/cpu
parentac6880782d8f369b7121488e8407ae6ddcf2b9ff (diff)
Driver/DDR: Moving Freescale DDR driver to a common driver
Freescale DDR driver has been used for mpc83xx, mpc85xx, mpc86xx SoCs. The similar DDR controllers will be used for ARM-based SoCs. Signed-off-by: York Sun <yorksun@freescale.com>
Diffstat (limited to 'arch/powerpc/cpu')
-rw-r--r--arch/powerpc/cpu/mpc83xx/Makefile6
-rw-r--r--arch/powerpc/cpu/mpc83xx/ecc.c4
-rw-r--r--arch/powerpc/cpu/mpc85xx/Makefile45
-rw-r--r--arch/powerpc/cpu/mpc85xx/cpu.c16
-rw-r--r--arch/powerpc/cpu/mpc85xx/ddr-gen1.c89
-rw-r--r--arch/powerpc/cpu/mpc85xx/ddr-gen2.c95
-rw-r--r--arch/powerpc/cpu/mpc85xx/ddr-gen3.c464
-rw-r--r--arch/powerpc/cpu/mpc85xx/mp.c2
-rw-r--r--arch/powerpc/cpu/mpc86xx/Makefile3
-rw-r--r--arch/powerpc/cpu/mpc86xx/ddr-8641.c85
-rw-r--r--arch/powerpc/cpu/mpc8xxx/Makefile6
-rw-r--r--arch/powerpc/cpu/mpc8xxx/ddr/Makefile29
-rw-r--r--arch/powerpc/cpu/mpc8xxx/ddr/common_timing_params.h57
-rw-r--r--arch/powerpc/cpu/mpc8xxx/ddr/ctrl_regs.c1656
-rw-r--r--arch/powerpc/cpu/mpc8xxx/ddr/ddr.h105
-rw-r--r--arch/powerpc/cpu/mpc8xxx/ddr/ddr1_dimm_params.c343
-rw-r--r--arch/powerpc/cpu/mpc8xxx/ddr/ddr2_dimm_params.c342
-rw-r--r--arch/powerpc/cpu/mpc8xxx/ddr/ddr3_dimm_params.c341
-rw-r--r--arch/powerpc/cpu/mpc8xxx/ddr/interactive.c1870
-rw-r--r--arch/powerpc/cpu/mpc8xxx/ddr/lc_common_dimm_params.c526
-rw-r--r--arch/powerpc/cpu/mpc8xxx/ddr/main.c718
-rw-r--r--arch/powerpc/cpu/mpc8xxx/ddr/options.c1147
-rw-r--r--arch/powerpc/cpu/mpc8xxx/ddr/util.c264
23 files changed, 14 insertions, 8199 deletions
diff --git a/arch/powerpc/cpu/mpc83xx/Makefile b/arch/powerpc/cpu/mpc83xx/Makefile
index d3f7001478..c345dd6ae6 100644
--- a/arch/powerpc/cpu/mpc83xx/Makefile
+++ b/arch/powerpc/cpu/mpc83xx/Makefile
@@ -38,11 +38,11 @@ obj-$(CONFIG_OF_LIBFDT) += fdt.o
# Stub implementations of cache management functions for USB
obj-y += cache.o
-ifdef CONFIG_FSL_DDR2
-obj-$(CONFIG_MPC8349) += ../mpc85xx/ddr-gen2.o
+ifdef CONFIG_SYS_FSL_DDR2
+obj-$(CONFIG_MPC8349) += $(SRCTREE)/drivers/ddr/fsl/mpc85xx_ddr_gen2.o
else
obj-y += spd_sdram.o
endif
-obj-$(CONFIG_FSL_DDR2) += law.o
+obj-$(CONFIG_SYS_FSL_DDR2) += law.o
endif # not minimal
diff --git a/arch/powerpc/cpu/mpc83xx/ecc.c b/arch/powerpc/cpu/mpc83xx/ecc.c
index 120b37ba63..6b7f72aa7d 100644
--- a/arch/powerpc/cpu/mpc83xx/ecc.c
+++ b/arch/powerpc/cpu/mpc83xx/ecc.c
@@ -15,7 +15,7 @@
void ecc_print_status(void)
{
immap_t *immap = (immap_t *) CONFIG_SYS_IMMR;
-#ifdef CONFIG_FSL_DDR2
+#ifdef CONFIG_SYS_FSL_DDR2
ccsr_ddr_t *ddr = &immap->ddr;
#else
ddr83xx_t *ddr = &immap->ddr;
@@ -99,7 +99,7 @@ void ecc_print_status(void)
int do_ecc(cmd_tbl_t * cmdtp, int flag, int argc, char * const argv[])
{
immap_t *immap = (immap_t *) CONFIG_SYS_IMMR;
-#ifdef CONFIG_FSL_DDR2
+#ifdef CONFIG_SYS_FSL_DDR2
ccsr_ddr_t *ddr = &immap->ddr;
#else
ddr83xx_t *ddr = &immap->ddr;
diff --git a/arch/powerpc/cpu/mpc85xx/Makefile b/arch/powerpc/cpu/mpc85xx/Makefile
index a34014f305..91c8402047 100644
--- a/arch/powerpc/cpu/mpc85xx/Makefile
+++ b/arch/powerpc/cpu/mpc85xx/Makefile
@@ -29,51 +29,6 @@ obj-$(CONFIG_MP) += release.o
obj-$(CONFIG_CMD_ERRATA) += cmd_errata.o
obj-$(CONFIG_CPM2) += commproc.o
-# supports ddr1
-obj-$(CONFIG_MPC8540) += ddr-gen1.o
-obj-$(CONFIG_MPC8560) += ddr-gen1.o
-obj-$(CONFIG_MPC8541) += ddr-gen1.o
-obj-$(CONFIG_MPC8555) += ddr-gen1.o
-
-# supports ddr1/2
-obj-$(CONFIG_MPC8548) += ddr-gen2.o
-obj-$(CONFIG_MPC8568) += ddr-gen2.o
-obj-$(CONFIG_MPC8544) += ddr-gen2.o
-
-# supports ddr1/2/3
-obj-$(CONFIG_PPC_C29X) += ddr-gen3.o
-obj-$(CONFIG_MPC8572) += ddr-gen3.o
-obj-$(CONFIG_MPC8536) += ddr-gen3.o
-obj-$(CONFIG_MPC8569) += ddr-gen3.o
-obj-$(CONFIG_P1010) += ddr-gen3.o
-obj-$(CONFIG_P1011) += ddr-gen3.o
-obj-$(CONFIG_P1012) += ddr-gen3.o
-obj-$(CONFIG_P1013) += ddr-gen3.o
-obj-$(CONFIG_P1014) += ddr-gen3.o
-obj-$(CONFIG_P1020) += ddr-gen3.o
-obj-$(CONFIG_P1021) += ddr-gen3.o
-obj-$(CONFIG_P1022) += ddr-gen3.o
-obj-$(CONFIG_P1023) += ddr-gen3.o
-obj-$(CONFIG_P1024) += ddr-gen3.o
-obj-$(CONFIG_P1025) += ddr-gen3.o
-obj-$(CONFIG_P2010) += ddr-gen3.o
-obj-$(CONFIG_P2020) += ddr-gen3.o
-obj-$(CONFIG_PPC_P2041) += ddr-gen3.o
-obj-$(CONFIG_PPC_P3041) += ddr-gen3.o
-obj-$(CONFIG_PPC_P4080) += ddr-gen3.o
-obj-$(CONFIG_PPC_P5020) += ddr-gen3.o
-obj-$(CONFIG_PPC_P5040) += ddr-gen3.o
-obj-$(CONFIG_PPC_T4240) += ddr-gen3.o
-obj-$(CONFIG_PPC_T4160) += ddr-gen3.o
-obj-$(CONFIG_PPC_B4420) += ddr-gen3.o
-obj-$(CONFIG_PPC_B4860) += ddr-gen3.o
-obj-$(CONFIG_BSC9131) += ddr-gen3.o
-obj-$(CONFIG_BSC9132) += ddr-gen3.o
-obj-$(CONFIG_PPC_T1040) += ddr-gen3.o
-obj-$(CONFIG_PPC_T1042) += ddr-gen3.o
-obj-$(CONFIG_PPC_T1020) += ddr-gen3.o
-obj-$(CONFIG_PPC_T1022) += ddr-gen3.o
-
obj-$(CONFIG_CPM2) += ether_fcc.o
obj-$(CONFIG_OF_LIBFDT) += fdt.o
obj-$(CONFIG_FSL_CORENET) += liodn.o
diff --git a/arch/powerpc/cpu/mpc85xx/cpu.c b/arch/powerpc/cpu/mpc85xx/cpu.c
index 1a0196c7c4..552acc6879 100644
--- a/arch/powerpc/cpu/mpc85xx/cpu.c
+++ b/arch/powerpc/cpu/mpc85xx/cpu.c
@@ -22,7 +22,7 @@
#include <asm/fsl_lbc.h>
#include <post.h>
#include <asm/processor.h>
-#include <asm/fsl_ddr_sdram.h>
+#include <fsl_ddr_sdram.h>
DECLARE_GLOBAL_DATA_PTR;
@@ -453,21 +453,21 @@ static void dump_spd_ddr_reg(void)
for (i = 0; i < CONFIG_NUM_DDR_CONTROLLERS; i++) {
switch (i) {
case 0:
- ddr[i] = (void *)CONFIG_SYS_MPC8xxx_DDR_ADDR;
+ ddr[i] = (void *)CONFIG_SYS_FSL_DDR_ADDR;
break;
-#if defined(CONFIG_SYS_MPC8xxx_DDR2_ADDR) && (CONFIG_NUM_DDR_CONTROLLERS > 1)
+#if defined(CONFIG_SYS_FSL_DDR2_ADDR) && (CONFIG_NUM_DDR_CONTROLLERS > 1)
case 1:
- ddr[i] = (void *)CONFIG_SYS_MPC8xxx_DDR2_ADDR;
+ ddr[i] = (void *)CONFIG_SYS_FSL_DDR2_ADDR;
break;
#endif
-#if defined(CONFIG_SYS_MPC8xxx_DDR3_ADDR) && (CONFIG_NUM_DDR_CONTROLLERS > 2)
+#if defined(CONFIG_SYS_FSL_DDR3_ADDR) && (CONFIG_NUM_DDR_CONTROLLERS > 2)
case 2:
- ddr[i] = (void *)CONFIG_SYS_MPC8xxx_DDR3_ADDR;
+ ddr[i] = (void *)CONFIG_SYS_FSL_DDR3_ADDR;
break;
#endif
-#if defined(CONFIG_SYS_MPC8xxx_DDR4_ADDR) && (CONFIG_NUM_DDR_CONTROLLERS > 3)
+#if defined(CONFIG_SYS_FSL_DDR4_ADDR) && (CONFIG_NUM_DDR_CONTROLLERS > 3)
case 3:
- ddr[i] = (void *)CONFIG_SYS_MPC8xxx_DDR4_ADDR;
+ ddr[i] = (void *)CONFIG_SYS_FSL_DDR4_ADDR;
break;
#endif
default:
diff --git a/arch/powerpc/cpu/mpc85xx/ddr-gen1.c b/arch/powerpc/cpu/mpc85xx/ddr-gen1.c
deleted file mode 100644
index 4dd8c0b5bf..0000000000
--- a/arch/powerpc/cpu/mpc85xx/ddr-gen1.c
+++ /dev/null
@@ -1,89 +0,0 @@
-/*
- * Copyright 2008 Freescale Semiconductor, Inc.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * Version 2 as published by the Free Software Foundation.
- */
-
-#include <common.h>
-#include <asm/io.h>
-#include <asm/fsl_ddr_sdram.h>
-
-#if (CONFIG_CHIP_SELECTS_PER_CTRL > 4)
-#error Invalid setting for CONFIG_CHIP_SELECTS_PER_CTRL
-#endif
-
-void fsl_ddr_set_memctl_regs(const fsl_ddr_cfg_regs_t *regs,
- unsigned int ctrl_num, int step)
-{
- unsigned int i;
- volatile ccsr_ddr_t *ddr = (void *)CONFIG_SYS_MPC8xxx_DDR_ADDR;
-
- if (ctrl_num != 0) {
- printf("%s unexpected ctrl_num = %u\n", __FUNCTION__, ctrl_num);
- return;
- }
-
- for (i = 0; i < CONFIG_CHIP_SELECTS_PER_CTRL; i++) {
- if (i == 0) {
- out_be32(&ddr->cs0_bnds, regs->cs[i].bnds);
- out_be32(&ddr->cs0_config, regs->cs[i].config);
-
- } else if (i == 1) {
- out_be32(&ddr->cs1_bnds, regs->cs[i].bnds);
- out_be32(&ddr->cs1_config, regs->cs[i].config);
-
- } else if (i == 2) {
- out_be32(&ddr->cs2_bnds, regs->cs[i].bnds);
- out_be32(&ddr->cs2_config, regs->cs[i].config);
-
- } else if (i == 3) {
- out_be32(&ddr->cs3_bnds, regs->cs[i].bnds);
- out_be32(&ddr->cs3_config, regs->cs[i].config);
- }
- }
-
- out_be32(&ddr->timing_cfg_1, regs->timing_cfg_1);
- out_be32(&ddr->timing_cfg_2, regs->timing_cfg_2);
- out_be32(&ddr->sdram_mode, regs->ddr_sdram_mode);
- out_be32(&ddr->sdram_interval, regs->ddr_sdram_interval);
-#if defined(CONFIG_MPC8555) || defined(CONFIG_MPC8541)
- out_be32(&ddr->sdram_clk_cntl, regs->ddr_sdram_clk_cntl);
-#endif
-
- /*
- * 200 painful micro-seconds must elapse between
- * the DDR clock setup and the DDR config enable.
- */
- udelay(200);
- asm volatile("sync;isync");
-
- out_be32(&ddr->sdram_cfg, regs->ddr_sdram_cfg);
-
- asm("sync;isync;msync");
- udelay(500);
-}
-
-#if defined(CONFIG_DDR_ECC) && !defined(CONFIG_ECC_INIT_VIA_DDRCONTROLLER)
-/*
- * Initialize all of memory for ECC, then enable errors.
- */
-
-void
-ddr_enable_ecc(unsigned int dram_size)
-{
- volatile ccsr_ddr_t *ddr= (void *)(CONFIG_SYS_MPC8xxx_DDR_ADDR);
-
- dma_meminit(CONFIG_MEM_INIT_VALUE, dram_size);
-
- /*
- * Enable errors for ECC.
- */
- debug("DMA DDR: err_disable = 0x%08x\n", ddr->err_disable);
- ddr->err_disable = 0x00000000;
- asm("sync;isync;msync");
- debug("DMA DDR: err_disable = 0x%08x\n", ddr->err_disable);
-}
-
-#endif /* CONFIG_DDR_ECC && ! CONFIG_ECC_INIT_VIA_DDRCONTROLLER */
diff --git a/arch/powerpc/cpu/mpc85xx/ddr-gen2.c b/arch/powerpc/cpu/mpc85xx/ddr-gen2.c
deleted file mode 100644
index 542bc84acf..0000000000
--- a/arch/powerpc/cpu/mpc85xx/ddr-gen2.c
+++ /dev/null
@@ -1,95 +0,0 @@
-/*
- * Copyright 2008-2011 Freescale Semiconductor, Inc.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * Version 2 as published by the Free Software Foundation.
- */
-
-#include <common.h>
-#include <asm/io.h>
-#include <asm/processor.h>
-#include <asm/fsl_ddr_sdram.h>
-
-#if (CONFIG_CHIP_SELECTS_PER_CTRL > 4)
-#error Invalid setting for CONFIG_CHIP_SELECTS_PER_CTRL
-#endif
-
-void fsl_ddr_set_memctl_regs(const fsl_ddr_cfg_regs_t *regs,
- unsigned int ctrl_num, int step)
-{
- unsigned int i;
- ccsr_ddr_t *ddr = (void *)CONFIG_SYS_MPC8xxx_DDR_ADDR;
-
-#if defined(CONFIG_SYS_FSL_ERRATUM_NMG_DDR120) && defined(CONFIG_MPC85xx)
- ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR);
- uint svr;
-#endif
-
- if (ctrl_num) {
- printf("%s unexpected ctrl_num = %u\n", __FUNCTION__, ctrl_num);
- return;
- }
-
-#ifdef CONFIG_SYS_FSL_ERRATUM_NMG_DDR120
- /*
- * Set the DDR IO receiver to an acceptable bias point.
- * Fixed in Rev 2.1.
- */
- svr = get_svr();
- if ((SVR_MAJ(svr) == 1) || IS_SVR_REV(svr, 2, 0)) {
- if ((regs->ddr_sdram_cfg & SDRAM_CFG_SDRAM_TYPE_MASK) ==
- SDRAM_CFG_SDRAM_TYPE_DDR2)
- out_be32(&gur->ddrioovcr, 0x90000000);
- else
- out_be32(&gur->ddrioovcr, 0xA8000000);
- }
-#endif
-
- for (i = 0; i < CONFIG_CHIP_SELECTS_PER_CTRL; i++) {
- if (i == 0) {
- out_be32(&ddr->cs0_bnds, regs->cs[i].bnds);
- out_be32(&ddr->cs0_config, regs->cs[i].config);
-
- } else if (i == 1) {
- out_be32(&ddr->cs1_bnds, regs->cs[i].bnds);
- out_be32(&ddr->cs1_config, regs->cs[i].config);
-
- } else if (i == 2) {
- out_be32(&ddr->cs2_bnds, regs->cs[i].bnds);
- out_be32(&ddr->cs2_config, regs->cs[i].config);
-
- } else if (i == 3) {
- out_be32(&ddr->cs3_bnds, regs->cs[i].bnds);
- out_be32(&ddr->cs3_config, regs->cs[i].config);
- }
- }
-
- out_be32(&ddr->timing_cfg_3, regs->timing_cfg_3);
- out_be32(&ddr->timing_cfg_0, regs->timing_cfg_0);
- out_be32(&ddr->timing_cfg_1, regs->timing_cfg_1);
- out_be32(&ddr->timing_cfg_2, regs->timing_cfg_2);
- out_be32(&ddr->sdram_cfg_2, regs->ddr_sdram_cfg_2);
- out_be32(&ddr->sdram_mode, regs->ddr_sdram_mode);
- out_be32(&ddr->sdram_mode_2, regs->ddr_sdram_mode_2);
- out_be32(&ddr->sdram_md_cntl, regs->ddr_sdram_md_cntl);
- out_be32(&ddr->sdram_interval, regs->ddr_sdram_interval);
- out_be32(&ddr->sdram_data_init, regs->ddr_data_init);
- out_be32(&ddr->sdram_clk_cntl, regs->ddr_sdram_clk_cntl);
- out_be32(&ddr->init_addr, regs->ddr_init_addr);
- out_be32(&ddr->init_ext_addr, regs->ddr_init_ext_addr);
-
- /*
- * 200 painful micro-seconds must elapse between
- * the DDR clock setup and the DDR config enable.
- */
- udelay(200);
- asm volatile("sync;isync");
-
- out_be32(&ddr->sdram_cfg, regs->ddr_sdram_cfg);
-
- /* Poll DDR_SDRAM_CFG_2[D_INIT] bit until auto-data init is done. */
- while (in_be32(&ddr->sdram_cfg_2) & 0x10) {
- udelay(10000); /* throttle polling rate */
- }
-}
diff --git a/arch/powerpc/cpu/mpc85xx/ddr-gen3.c b/arch/powerpc/cpu/mpc85xx/ddr-gen3.c
deleted file mode 100644
index 1be51d3307..0000000000
--- a/arch/powerpc/cpu/mpc85xx/ddr-gen3.c
+++ /dev/null
@@ -1,464 +0,0 @@
-/*
- * Copyright 2008-2012 Freescale Semiconductor, Inc.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * Version 2 as published by the Free Software Foundation.
- */
-
-#include <common.h>
-#include <asm/io.h>
-#include <asm/fsl_ddr_sdram.h>
-#include <asm/processor.h>
-
-#if (CONFIG_CHIP_SELECTS_PER_CTRL > 4)
-#error Invalid setting for CONFIG_CHIP_SELECTS_PER_CTRL
-#endif
-
-
-/*
- * regs has the to-be-set values for DDR controller registers
- * ctrl_num is the DDR controller number
- * step: 0 goes through the initialization in one pass
- * 1 sets registers and returns before enabling controller
- * 2 resumes from step 1 and continues to initialize
- * Dividing the initialization to two steps to deassert DDR reset signal
- * to comply with JEDEC specs for RDIMMs.
- */
-void fsl_ddr_set_memctl_regs(const fsl_ddr_cfg_regs_t *regs,
- unsigned int ctrl_num, int step)
-{
- unsigned int i, bus_width;
- volatile ccsr_ddr_t *ddr;
- u32 temp_sdram_cfg;
- u32 total_gb_size_per_controller;
- int timeout;
-#ifdef CONFIG_SYS_FSL_ERRATUM_DDR111_DDR134
- int timeout_save;
- volatile ccsr_local_ecm_t *ecm = (void *)CONFIG_SYS_MPC85xx_ECM_ADDR;
- unsigned int csn_bnds_backup = 0, cs_sa, cs_ea, *csn_bnds_t;
- int csn = -1;
-#endif
-
- switch (ctrl_num) {
- case 0:
- ddr = (void *)CONFIG_SYS_MPC8xxx_DDR_ADDR;
- break;
-#if defined(CONFIG_SYS_MPC8xxx_DDR2_ADDR) && (CONFIG_NUM_DDR_CONTROLLERS > 1)
- case 1:
- ddr = (void *)CONFIG_SYS_MPC8xxx_DDR2_ADDR;
- break;
-#endif
-#if defined(CONFIG_SYS_MPC8xxx_DDR3_ADDR) && (CONFIG_NUM_DDR_CONTROLLERS > 2)
- case 2:
- ddr = (void *)CONFIG_SYS_MPC8xxx_DDR3_ADDR;
- break;
-#endif
-#if defined(CONFIG_SYS_MPC8xxx_DDR4_ADDR) && (CONFIG_NUM_DDR_CONTROLLERS > 3)
- case 3:
- ddr = (void *)CONFIG_SYS_MPC8xxx_DDR4_ADDR;
- break;
-#endif
- default:
- printf("%s unexpected ctrl_num = %u\n", __FUNCTION__, ctrl_num);
- return;
- }
-
- if (step == 2)
- goto step2;
-
- if (regs->ddr_eor)
- out_be32(&ddr->eor, regs->ddr_eor);
-#ifdef CONFIG_SYS_FSL_ERRATUM_DDR111_DDR134
- debug("Workaround for ERRATUM_DDR111_DDR134\n");
- for (i = 0; i < CONFIG_CHIP_SELECTS_PER_CTRL; i++) {
- cs_sa = (regs->cs[i].bnds >> 16) & 0xfff;
- cs_ea = regs->cs[i].bnds & 0xfff;
- if ((cs_sa <= 0xff) && (cs_ea >= 0xff)) {
- csn = i;
- csn_bnds_backup = regs->cs[i].bnds;
- csn_bnds_t = (unsigned int *) &regs->cs[i].bnds;
- if (cs_ea > 0xeff)
- *csn_bnds_t = regs->cs[i].bnds + 0x01000000;
- else
- *csn_bnds_t = regs->cs[i].bnds + 0x01000100;
- debug("Found cs%d_bns (0x%08x) covering 0xff000000, "
- "change it to 0x%x\n",
- csn, csn_bnds_backup, regs->cs[i].bnds);
- break;
- }
- }
-#endif
- for (i = 0; i < CONFIG_CHIP_SELECTS_PER_CTRL; i++) {
- if (i == 0) {
- out_be32(&ddr->cs0_bnds, regs->cs[i].bnds);
- out_be32(&ddr->cs0_config, regs->cs[i].config);
- out_be32(&ddr->cs0_config_2, regs->cs[i].config_2);
-
- } else if (i == 1) {
- out_be32(&ddr->cs1_bnds, regs->cs[i].bnds);
- out_be32(&ddr->cs1_config, regs->cs[i].config);
- out_be32(&ddr->cs1_config_2, regs->cs[i].config_2);
-
- } else if (i == 2) {
- out_be32(&ddr->cs2_bnds, regs->cs[i].bnds);
- out_be32(&ddr->cs2_config, regs->cs[i].config);
- out_be32(&ddr->cs2_config_2, regs->cs[i].config_2);
-
- } else if (i == 3) {
- out_be32(&ddr->cs3_bnds, regs->cs[i].bnds);
- out_be32(&ddr->cs3_config, regs->cs[i].config);
- out_be32(&ddr->cs3_config_2, regs->cs[i].config_2);
- }
- }
-
- out_be32(&ddr->timing_cfg_3, regs->timing_cfg_3);
- out_be32(&ddr->timing_cfg_0, regs->timing_cfg_0);
- out_be32(&ddr->timing_cfg_1, regs->timing_cfg_1);
- out_be32(&ddr->timing_cfg_2, regs->timing_cfg_2);
- out_be32(&ddr->sdram_cfg_2, regs->ddr_sdram_cfg_2);
- out_be32(&ddr->sdram_mode, regs->ddr_sdram_mode);
- out_be32(&ddr->sdram_mode_2, regs->ddr_sdram_mode_2);
- out_be32(&ddr->sdram_mode_3, regs->ddr_sdram_mode_3);
- out_be32(&ddr->sdram_mode_4, regs->ddr_sdram_mode_4);
- out_be32(&ddr->sdram_mode_5, regs->ddr_sdram_mode_5);
- out_be32(&ddr->sdram_mode_6, regs->ddr_sdram_mode_6);
- out_be32(&ddr->sdram_mode_7, regs->ddr_sdram_mode_7);
- out_be32(&ddr->sdram_mode_8, regs->ddr_sdram_mode_8);
- out_be32(&ddr->sdram_md_cntl, regs->ddr_sdram_md_cntl);
- out_be32(&ddr->sdram_interval, regs->ddr_sdram_interval);
- out_be32(&ddr->sdram_data_init, regs->ddr_data_init);
- out_be32(&ddr->sdram_clk_cntl, regs->ddr_sdram_clk_cntl);
- out_be32(&ddr->init_addr, regs->ddr_init_addr);
- out_be32(&ddr->init_ext_addr, regs->ddr_init_ext_addr);
-
- out_be32(&ddr->timing_cfg_4, regs->timing_cfg_4);
- out_be32(&ddr->timing_cfg_5, regs->timing_cfg_5);
- out_be32(&ddr->ddr_zq_cntl, regs->ddr_zq_cntl);
- out_be32(&ddr->ddr_wrlvl_cntl, regs->ddr_wrlvl_cntl);
-#ifndef CONFIG_SYS_FSL_DDR_EMU
- /*
- * Skip these two registers if running on emulator
- * because emulator doesn't have skew between bytes.
- */
-
- if (regs->ddr_wrlvl_cntl_2)
- out_be32(&ddr->ddr_wrlvl_cntl_2, regs->ddr_wrlvl_cntl_2);
- if (regs->ddr_wrlvl_cntl_3)
- out_be32(&ddr->ddr_wrlvl_cntl_3, regs->ddr_wrlvl_cntl_3);
-#endif
-
- out_be32(&ddr->ddr_sr_cntr, regs->ddr_sr_cntr);
- out_be32(&ddr->ddr_sdram_rcw_1, regs->ddr_sdram_rcw_1);
- out_be32(&ddr->ddr_sdram_rcw_2, regs->ddr_sdram_rcw_2);
- out_be32(&ddr->ddr_cdr1, regs->ddr_cdr1);
- out_be32(&ddr->ddr_cdr2, regs->ddr_cdr2);
- out_be32(&ddr->err_disable, regs->err_disable);
- out_be32(&ddr->err_int_en, regs->err_int_en);
- for (i = 0; i < 32; i++) {
- if (regs->debug[i]) {
- debug("Write to debug_%d as %08x\n", i+1, regs->debug[i]);
- out_be32(&ddr->debug[i], regs->debug[i]);
- }
- }
-#ifdef CONFIG_SYS_FSL_ERRATUM_A_004934
- out_be32(&ddr->debug[28], 0x30003000);
-#endif
-
-#ifdef CONFIG_SYS_FSL_ERRATUM_DDR_A003474
- out_be32(&ddr->debug[12], 0x00000015);
- out_be32(&ddr->debug[21], 0x24000000);
-#endif /* CONFIG_SYS_FSL_ERRATUM_DDR_A003474 */
-
- /*
- * For RDIMMs, JEDEC spec requires clocks to be stable before reset is
- * deasserted. Clocks start when any chip select is enabled and clock
- * control register is set. Because all DDR components are connected to
- * one reset signal, this needs to be done in two steps. Step 1 is to
- * get the clocks started. Step 2 resumes after reset signal is
- * deasserted.
- */
- if (step == 1) {
- udelay(200);
- return;
- }
-
-step2:
- /* Set, but do not enable the memory */
- temp_sdram_cfg = regs->ddr_sdram_cfg;
- temp_sdram_cfg &= ~(SDRAM_CFG_MEM_EN);
- out_be32(&ddr->sdram_cfg, temp_sdram_cfg);
-#ifdef CONFIG_SYS_FSL_ERRATUM_DDR_A003
- debug("Workaround for ERRATUM_DDR_A003\n");
- if (regs->ddr_sdram_rcw_2 & 0x00f00000) {
- out_be32(&ddr->timing_cfg_2, regs->timing_cfg_2 & 0xf07fffff);
- out_be32(&ddr->debug[2], 0x00000400);
- out_be32(&ddr->ddr_zq_cntl, regs->ddr_zq_cntl & 0x7fffffff);
- out_be32(&ddr->ddr_wrlvl_cntl, regs->ddr_wrlvl_cntl & 0x7fffffff);
- out_be32(&ddr->sdram_cfg_2, regs->ddr_sdram_cfg_2 & 0xffffffeb);
- out_be32(&ddr->mtcr, 0);
- out_be32(&ddr->debug[12], 0x00000015);
- out_be32(&ddr->debug[21], 0x24000000);
- out_be32(&ddr->sdram_interval, regs->ddr_sdram_interval & 0xffff);
- out_be32(&ddr->sdram_cfg, temp_sdram_cfg | SDRAM_CFG_BI | SDRAM_CFG_MEM_EN);
-
- asm volatile("sync;isync");
- while (!(in_be32(&ddr->debug[1]) & 0x2))
- ;
-
- switch (regs->ddr_sdram_rcw_2 & 0x00f00000) {
- case 0x00000000:
- out_be32(&ddr->sdram_md_cntl,
- MD_CNTL_MD_EN |
- MD_CNTL_CS_SEL_CS0_CS1 |
- 0x04000000 |
- MD_CNTL_WRCW |
- MD_CNTL_MD_VALUE(0x02));
- break;
- case 0x00100000:
- out_be32(&ddr->sdram_md_cntl,
- MD_CNTL_MD_EN |
- MD_CNTL_CS_SEL_CS0_CS1 |
- 0x04000000 |
- MD_CNTL_WRCW |
- MD_CNTL_MD_VALUE(0x0a));
- break;
- case 0x00200000:
- out_be32(&ddr->sdram_md_cntl,
- MD_CNTL_MD_EN |
- MD_CNTL_CS_SEL_CS0_CS1 |
- 0x04000000 |
- MD_CNTL_WRCW |
- MD_CNTL_MD_VALUE(0x12));
- break;
- case 0x00300000:
- out_be32(&ddr->sdram_md_cntl,
- MD_CNTL_MD_EN |
- MD_CNTL_CS_SEL_CS0_CS1 |
- 0x04000000 |
- MD_CNTL_WRCW |
- MD_CNTL_MD_VALUE(0x1a));
- break;
- default:
- out_be32(&ddr->sdram_md_cntl,
- MD_CNTL_MD_EN |
- MD_CNTL_CS_SEL_CS0_CS1 |
- 0x04000000 |
- MD_CNTL_WRCW |
- MD_CNTL_MD_VALUE(0x02));
- printf("Unsupported RC10\n");
- break;
- }
-
- while (in_be32(&ddr->sdram_md_cntl) & 0x80000000)
- ;
- udelay(6);
- out_be32(&ddr->sdram_cfg, temp_sdram_cfg);
- out_be32(&ddr->timing_cfg_2, regs->timing_cfg_2);
- out_be32(&ddr->debug[2], 0x0);
- out_be32(&ddr->ddr_zq_cntl, regs->ddr_zq_cntl);
- out_be32(&ddr->ddr_wrlvl_cntl, regs->ddr_wrlvl_cntl);
- out_be32(&ddr->sdram_cfg_2, regs->ddr_sdram_cfg_2);
- out_be32(&ddr->debug[12], 0x0);
- out_be32(&ddr->debug[21], 0x0);
- out_be32(&ddr->sdram_interval, regs->ddr_sdram_interval);
-
- }
-#endif
- /*
- * For 8572 DDR1 erratum - DDR controller may enter illegal state
- * when operatiing in 32-bit bus mode with 4-beat bursts,
- * This erratum does not affect DDR3 mode, only for DDR2 mode.
- */
-#ifdef CONFIG_SYS_FSL_ERRATUM_DDR_115
- debug("Workaround for ERRATUM_DDR_115\n");
- if ((((in_be32(&ddr->sdram_cfg) >> 24) & 0x7) == SDRAM_TYPE_DDR2)
- && in_be32(&ddr->sdram_cfg) & 0x80000) {
- /* set DEBUG_1[31] */
- setbits_be32(&ddr->debug[0], 1);
- }
-#endif
-#ifdef CONFIG_SYS_FSL_ERRATUM_DDR111_DDR134
- debug("Workaround for ERRATUM_DDR111_DDR134\n");
- /*
- * This is the combined workaround for DDR111 and DDR134
- * following the published errata for MPC8572
- */
-
- /* 1. Set EEBACR[3] */
- setbits_be32(&ecm->eebacr, 0x10000000);
- debug("Setting EEBACR[3] to 0x%08x\n", in_be32(&ecm->eebacr));
-
- /* 2. Set DINIT in SDRAM_CFG_2*/
- setbits_be32(&ddr->sdram_cfg_2, SDRAM_CFG2_D_INIT);
- debug("Setting sdram_cfg_2[D_INIT] to 0x%08x\n",
- in_be32(&ddr->sdram_cfg_2));
-
- /* 3. Set DEBUG_3[21] */
- setbits_be32(&ddr->debug[2], 0x400);
- debug("Setting DEBUG_3[21] to 0x%08x\n", in_be32(&ddr->debug[2]));
-
-#endif /* part 1 of the workaound */
-
- /*
- * 500 painful micro-seconds must elapse between
- * the DDR clock setup and the DDR config enable.
- * DDR2 need 200 us, and DDR3 need 500 us from spec,
- * we choose the max, that is 500 us for all of case.
- */
- udelay(500);
- asm volatile("sync;isync");
-
- /* Let the controller go */
- temp_sdram_cfg = in_be32(&ddr->sdram_cfg) & ~SDRAM_CFG_BI;
- out_be32(&ddr->sdram_cfg, temp_sdram_cfg | SDRAM_CFG_MEM_EN);
- asm volatile("sync;isync");
-
- total_gb_size_per_controller = 0;
- for (i = 0; i < CONFIG_CHIP_SELECTS_PER_CTRL; i++) {
- if (!(regs->cs[i].config & 0x80000000))
- continue;
- total_gb_size_per_controller += 1 << (
- ((regs->cs[i].config >> 14) & 0x3) + 2 +
- ((regs->cs[i].config >> 8) & 0x7) + 12 +
- ((regs->cs[i].config >> 0) & 0x7) + 8 +
- 3 - ((regs->ddr_sdram_cfg >> 19) & 0x3) -
- 26); /* minus 26 (count of 64M) */
- }
- if (fsl_ddr_get_intl3r() & 0x80000000) /* 3-way interleaving */
- total_gb_size_per_controller *= 3;
- else if (regs->cs[0].config & 0x20000000) /* 2-way interleaving */
- total_gb_size_per_controller <<= 1;
- /*
- * total memory / bus width = transactions needed
- * transactions needed / data rate = seconds
- * to add plenty of buffer, double the time
- * For example, 2GB on 666MT/s 64-bit bus takes about 402ms
- * Let's wait for 800ms
- */
- bus_width = 3 - ((ddr->sdram_cfg & SDRAM_CFG_DBW_MASK)
- >> SDRAM_CFG_DBW_SHIFT);
- timeout = ((total_gb_size_per_controller << (6 - bus_width)) * 100 /
- (get_ddr_freq(0) >> 20)) << 1;
-#ifdef CONFIG_SYS_FSL_ERRATUM_DDR111_DDR134
- timeout_save = timeout;
-#endif
- total_gb_size_per_controller >>= 4; /* shift down to gb size */
- debug("total %d GB\n", total_gb_size_per_controller);
- debug("Need to wait up to %d * 10ms\n", timeout);
-
- /* Poll DDR_SDRAM_CFG_2[D_INIT] bit until auto-data init is done. */
- while ((in_be32(&ddr->sdram_cfg_2) & SDRAM_CFG2_D_INIT) &&
- (timeout >= 0)) {
- udelay(10000); /* throttle polling rate */
- timeout--;
- }
-
- if (timeout <= 0)
- printf("Waiting for D_INIT timeout. Memory may not work.\n");
-
-#ifdef CONFIG_SYS_FSL_ERRATUM_DDR111_DDR134
- /* continue this workaround */
-
- /* 4. Clear DEBUG3[21] */
- clrbits_be32(&ddr->debug[2], 0x400);
- debug("Clearing D3[21] to 0x%08x\n", in_be32(&ddr->debug[2]));
-
- /* DDR134 workaround starts */
- /* A: Clear sdram_cfg_2[odt_cfg] */
- clrbits_be32(&ddr->sdram_cfg_2, SDRAM_CFG2_ODT_CFG_MASK);
- debug("Clearing SDRAM_CFG2[ODT_CFG] to 0x%08x\n",
- in_be32(&ddr->sdram_cfg_2));
-
- /* B: Set DEBUG1[15] */
- setbits_be32(&ddr->debug[0], 0x10000);
- debug("Setting D1[15] to 0x%08x\n", in_be32(&ddr->debug[0]));
-
- /* C: Set timing_cfg_2[cpo] to 0b11111 */
- setbits_be32(&ddr->timing_cfg_2, TIMING_CFG_2_CPO_MASK);
- debug("Setting TMING_CFG_2[CPO] to 0x%08x\n",
- in_be32(&ddr->timing_cfg_2));
-
- /* D: Set D6 to 0x9f9f9f9f */
- out_be32(&ddr->debug[5], 0x9f9f9f9f);
- debug("Setting D6 to 0x%08x\n", in_be32(&ddr->debug[5]));
-
- /* E: Set D7 to 0x9f9f9f9f */
- out_be32(&ddr->debug[6], 0x9f9f9f9f);
- debug("Setting D7 to 0x%08x\n", in_be32(&ddr->debug[6]));
-
- /* F: Set D2[20] */
- setbits_be32(&ddr->debug[1], 0x800);
- debug("Setting D2[20] to 0x%08x\n", in_be32(&ddr->debug[1]));
-
- /* G: Poll on D2[20] until cleared */
- while (in_be32(&ddr->debug[1]) & 0x800)
- udelay(10000); /* throttle polling rate */
-
- /* H: Clear D1[15] */
- clrbits_be32(&ddr->debug[0], 0x10000);
- debug("Setting D1[15] to 0x%08x\n", in_be32(&ddr->debug[0]));
-
- /* I: Set sdram_cfg_2[odt_cfg] */
- setbits_be32(&ddr->sdram_cfg_2,
- regs->ddr_sdram_cfg_2 & SDRAM_CFG2_ODT_CFG_MASK);
- debug("Setting sdram_cfg_2 to 0x%08x\n", in_be32(&ddr->sdram_cfg_2));
-
- /* Continuing with the DDR111 workaround */
- /* 5. Set D2[21] */
- setbits_be32(&ddr->debug[1], 0x400);
- debug("Setting D2[21] to 0x%08x\n", in_be32(&ddr->debug[1]));
-
- /* 6. Poll D2[21] until its cleared */
- while (in_be32(&ddr->debug[1]) & 0x400)
- udelay(10000); /* throttle polling rate */
-
- /* 7. Wait for state machine 2nd run, roughly 400ms/GB */
- debug("Wait for %d * 10ms\n", timeout_save);
- udelay(timeout_save * 10000);
-
- /* 8. Set sdram_cfg_2[dinit] if options requires */
- setbits_be32(&ddr->sdram_cfg_2,
- regs->ddr_sdram_cfg_2 & SDRAM_CFG2_D_INIT);
- debug("Setting sdram_cfg_2 to 0x%08x\n", in_be32(&ddr->sdram_cfg_2));
-
- /* 9. Poll until dinit is cleared */
- timeout = timeout_save;
- debug("Need to wait up to %d * 10ms\n", timeout);
- while ((in_be32(&ddr->sdram_cfg_2) & SDRAM_CFG2_D_INIT) &&
- (timeout >= 0)) {
- udelay(10000); /* throttle polling rate */
- timeout--;
- }
-
- if (timeout <= 0)
- printf("Waiting for D_INIT timeout. Memory may not work.\n");
-
- /* 10. Clear EEBACR[3] */
- clrbits_be32(&ecm->eebacr, 10000000);
- debug("Clearing EEBACR[3] to 0x%08x\n", in_be32(&ecm->eebacr));
-
- if (csn != -1) {
- csn_bnds_t = (unsigned int *) &regs->cs[csn].bnds;
- *csn_bnds_t = csn_bnds_backup;
- debug("Change cs%d_bnds back to 0x%08x\n",
- csn, regs->cs[csn].bnds);
- setbits_be32(&ddr->sdram_cfg, 0x2); /* MEM_HALT */
- switch (csn) {
- case 0:
- out_be32(&ddr->cs0_bnds, regs->cs[csn].bnds);
- break;
- case 1:
- out_be32(&ddr->cs1_bnds, regs->cs[csn].bnds);
- break;
- case 2:
- out_be32(&ddr->cs2_bnds, regs->cs[csn].bnds);
- break;
- case 3:
- out_be32(&ddr->cs3_bnds, regs->cs[csn].bnds);
- break;
- }
- clrbits_be32(&ddr->sdram_cfg, 0x2);
- }
-#endif /* CONFIG_SYS_FSL_ERRATUM_DDR111_DDR134 */
-}
diff --git a/arch/powerpc/cpu/mpc85xx/mp.c b/arch/powerpc/cpu/mpc85xx/mp.c
index 5f198eb305..88c8e65930 100644
--- a/arch/powerpc/cpu/mpc85xx/mp.c
+++ b/arch/powerpc/cpu/mpc85xx/mp.c
@@ -11,7 +11,7 @@
#include <asm/io.h>
#include <asm/mmu.h>
#include <asm/fsl_law.h>
-#include <asm/fsl_ddr_sdram.h>
+#include <fsl_ddr_sdram.h>
#include "mp.h"
DECLARE_GLOBAL_DATA_PTR;
diff --git a/arch/powerpc/cpu/mpc86xx/Makefile b/arch/powerpc/cpu/mpc86xx/Makefile
index bcb786dcab..0f790b0efc 100644
--- a/arch/powerpc/cpu/mpc86xx/Makefile
+++ b/arch/powerpc/cpu/mpc86xx/Makefile
@@ -16,9 +16,6 @@ obj-$(CONFIG_MP) += release.o
obj-y += cpu.o
obj-y += cpu_init.o
-# 8610 & 8641 are identical w/regards to DDR
-obj-$(CONFIG_MPC8610) += ddr-8641.o
-obj-$(CONFIG_MPC8641) += ddr-8641.o
obj-$(CONFIG_OF_LIBFDT) += fdt.o
obj-y += interrupts.o
obj-$(CONFIG_MP) += mp.o
diff --git a/arch/powerpc/cpu/mpc86xx/ddr-8641.c b/arch/powerpc/cpu/mpc86xx/ddr-8641.c
deleted file mode 100644
index 33a91f9f78..0000000000
--- a/arch/powerpc/cpu/mpc86xx/ddr-8641.c
+++ /dev/null
@@ -1,85 +0,0 @@
-/*
- * Copyright 2008 Freescale Semiconductor, Inc.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * Version 2 as published by the Free Software Foundation.
- */
-
-#include <common.h>
-#include <asm/io.h>
-#include <asm/fsl_ddr_sdram.h>
-
-#if (CONFIG_CHIP_SELECTS_PER_CTRL > 4)
-#error Invalid setting for CONFIG_CHIP_SELECTS_PER_CTRL
-#endif
-
-void fsl_ddr_set_memctl_regs(const fsl_ddr_cfg_regs_t *regs,
- unsigned int ctrl_num, int step)
-{
- unsigned int i;
- volatile ccsr_ddr_t *ddr;
-
- switch (ctrl_num) {
- case 0:
- ddr = (void *)CONFIG_SYS_MPC8xxx_DDR_ADDR;
- break;
- case 1:
- ddr = (void *)CONFIG_SYS_MPC8xxx_DDR2_ADDR;
- break;
- default:
- printf("%s unexpected ctrl_num = %u\n", __FUNCTION__, ctrl_num);
- return;
- }
-
- for (i = 0; i < CONFIG_CHIP_SELECTS_PER_CTRL; i++) {
- if (i == 0) {
- out_be32(&ddr->cs0_bnds, regs->cs[i].bnds);
- out_be32(&ddr->cs0_config, regs->cs[i].config);
-
- } else if (i == 1) {
- out_be32(&ddr->cs1_bnds, regs->cs[i].bnds);
- out_be32(&ddr->cs1_config, regs->cs[i].config);
-
- } else if (i == 2) {
- out_be32(&ddr->cs2_bnds, regs->cs[i].bnds);
- out_be32(&ddr->cs2_config, regs->cs[i].config);
-
- } else if (i == 3) {
- out_be32(&ddr->cs3_bnds, regs->cs[i].bnds);
- out_be32(&ddr->cs3_config, regs->cs[i].config);
- }
- }
-
- out_be32(&ddr->timing_cfg_3, regs->timing_cfg_3);
- out_be32(&ddr->timing_cfg_0, regs->timing_cfg_0);
- out_be32(&ddr->timing_cfg_1, regs->timing_cfg_1);
- out_be32(&ddr->timing_cfg_2, regs->timing_cfg_2);
- out_be32(&ddr->sdram_cfg_2, regs->ddr_sdram_cfg_2);
- out_be32(&ddr->sdram_mode, regs->ddr_sdram_mode);
- out_be32(&ddr->sdram_mode_2, regs->ddr_sdram_mode_2);
- out_be32(&ddr->sdram_mode_cntl, regs->ddr_sdram_md_cntl);
- out_be32(&ddr->sdram_interval, regs->ddr_sdram_interval);
- out_be32(&ddr->sdram_data_init, regs->ddr_data_init);
- out_be32(&ddr->sdram_clk_cntl, regs->ddr_sdram_clk_cntl);
- out_be32(&ddr->init_addr, regs->ddr_init_addr);
- out_be32(&ddr->init_ext_addr, regs->ddr_init_ext_addr);
-
- debug("before go\n");
-
- /*
- * 200 painful micro-seconds must elapse between
- * the DDR clock setup and the DDR config enable.
- */
- udelay(200);
- asm volatile("sync;isync");
-
- out_be32(&ddr->sdram_cfg, regs->ddr_sdram_cfg);
-
- /*
- * Poll DDR_SDRAM_CFG_2[D_INIT] bit until auto-data init is done
- */
- while (in_be32(&ddr->sdram_cfg_2) & 0x10) {
- udelay(10000); /* throttle polling rate */
- }
-}
diff --git a/arch/powerpc/cpu/mpc8xxx/Makefile b/arch/powerpc/cpu/mpc8xxx/Makefile
index 1d083bf354..395fed16b6 100644
--- a/arch/powerpc/cpu/mpc8xxx/Makefile
+++ b/arch/powerpc/cpu/mpc8xxx/Makefile
@@ -31,9 +31,3 @@ obj-$(CONFIG_SYS_SRIO) += srio.o
obj-$(CONFIG_FSL_LAW) += law.o
endif
-
-ifdef CONFIG_SPL_BUILD
-obj-$(CONFIG_SPL_MPC8XXX_INIT_DDR_SUPPORT) += ddr/
-else
-obj-y += ddr/
-endif
diff --git a/arch/powerpc/cpu/mpc8xxx/ddr/Makefile b/arch/powerpc/cpu/mpc8xxx/ddr/Makefile
deleted file mode 100644
index 8cbc06c95a..0000000000
--- a/arch/powerpc/cpu/mpc8xxx/ddr/Makefile
+++ /dev/null
@@ -1,29 +0,0 @@
-#
-# Copyright 2008-2011 Freescale Semiconductor, Inc.
-#
-# This program is free software; you can redistribute it and/or
-# modify it under the terms of the GNU General Public License
-# Version 2 as published by the Free Software Foundation.
-#
-
-obj-$(CONFIG_FSL_DDR1) += main.o util.o ctrl_regs.o options.o \
- lc_common_dimm_params.o
-
-obj-$(CONFIG_FSL_DDR2) += main.o util.o ctrl_regs.o options.o \
- lc_common_dimm_params.o
-
-obj-$(CONFIG_FSL_DDR3) += main.o util.o ctrl_regs.o options.o \
- lc_common_dimm_params.o
-ifdef CONFIG_DDR_SPD
-SPD := y
-endif
-ifdef CONFIG_SPD_EEPROM
-SPD := y
-endif
-ifdef SPD
-obj-$(CONFIG_FSL_DDR1) += ddr1_dimm_params.o
-obj-$(CONFIG_FSL_DDR2) += ddr2_dimm_params.o
-obj-$(CONFIG_FSL_DDR3) += ddr3_dimm_params.o
-endif
-
-obj-$(CONFIG_FSL_DDR_INTERACTIVE) += interactive.o
diff --git a/arch/powerpc/cpu/mpc8xxx/ddr/common_timing_params.h b/arch/powerpc/cpu/mpc8xxx/ddr/common_timing_params.h
deleted file mode 100644
index 76338d4e6c..0000000000
--- a/arch/powerpc/cpu/mpc8xxx/ddr/common_timing_params.h
+++ /dev/null
@@ -1,57 +0,0 @@
-/*
- * Copyright 2008 Freescale Semiconductor, Inc.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * Version 2 as published by the Free Software Foundation.
- */
-
-#ifndef COMMON_TIMING_PARAMS_H
-#define COMMON_TIMING_PARAMS_H
-
-typedef struct {
- /* parameters to constrict */
-
- unsigned int tckmin_x_ps;
- unsigned int tckmax_ps;
- unsigned int tckmax_max_ps;
- unsigned int trcd_ps;
- unsigned int trp_ps;
- unsigned int tras_ps;
-
- unsigned int twr_ps; /* maximum = 63750 ps */
- unsigned int twtr_ps; /* maximum = 63750 ps */
- unsigned int trfc_ps; /* maximum = 255 ns + 256 ns + .75 ns
- = 511750 ps */
-
- unsigned int trrd_ps; /* maximum = 63750 ps */
- unsigned int trc_ps; /* maximum = 254 ns + .75 ns = 254750 ps */
-
- unsigned int refresh_rate_ps;
- unsigned int extended_op_srt;
-
- unsigned int tis_ps; /* byte 32, spd->ca_setup */
- unsigned int tih_ps; /* byte 33, spd->ca_hold */
- unsigned int tds_ps; /* byte 34, spd->data_setup */
- unsigned int tdh_ps; /* byte 35, spd->data_hold */
- unsigned int trtp_ps; /* byte 38, spd->trtp */
- unsigned int tdqsq_max_ps; /* byte 44, spd->tdqsq */
- unsigned int tqhs_ps; /* byte 45, spd->tqhs */
-
- unsigned int ndimms_present;
- unsigned int lowest_common_SPD_caslat;
- unsigned int highest_common_derated_caslat;
- unsigned int additive_latency;
- unsigned int all_dimms_burst_lengths_bitmask;
- unsigned int all_dimms_registered;
- unsigned int all_dimms_unbuffered;
- unsigned int all_dimms_ecc_capable;
-
- unsigned long long total_mem;
- unsigned long long base_address;
-
- /* DDR3 RDIMM */
- unsigned char rcw[16]; /* Register Control Word 0-15 */
-} common_timing_params_t;
-
-#endif
diff --git a/arch/powerpc/cpu/mpc8xxx/ddr/ctrl_regs.c b/arch/powerpc/cpu/mpc8xxx/ddr/ctrl_regs.c
deleted file mode 100644
index dcfc48aa95..0000000000
--- a/arch/powerpc/cpu/mpc8xxx/ddr/ctrl_regs.c
+++ /dev/null
@@ -1,1656 +0,0 @@
-/*
- * Copyright 2008-2012 Freescale Semiconductor, Inc.
- *
- * SPDX-License-Identifier: GPL-2.0+
- */
-
-/*
- * Generic driver for Freescale DDR/DDR2/DDR3 memory controller.
- * Based on code from spd_sdram.c
- * Author: James Yang [at freescale.com]
- */
-
-#include <common.h>
-#include <asm/fsl_ddr_sdram.h>
-
-#include "ddr.h"
-
-#define _DDR_ADDR CONFIG_SYS_MPC8xxx_DDR_ADDR
-
-static u32 fsl_ddr_get_version(void)
-{
- ccsr_ddr_t *ddr;
- u32 ver_major_minor_errata;
-
- ddr = (void *)_DDR_ADDR;
- ver_major_minor_errata = (in_be32(&ddr->ip_rev1) & 0xFFFF) << 8;
- ver_major_minor_errata |= (in_be32(&ddr->ip_rev2) & 0xFF00) >> 8;
-
- return ver_major_minor_errata;
-}
-
-unsigned int picos_to_mclk(unsigned int picos);
-
-/*
- * Determine Rtt value.
- *
- * This should likely be either board or controller specific.
- *
- * Rtt(nominal) - DDR2:
- * 0 = Rtt disabled
- * 1 = 75 ohm
- * 2 = 150 ohm
- * 3 = 50 ohm
- * Rtt(nominal) - DDR3:
- * 0 = Rtt disabled
- * 1 = 60 ohm
- * 2 = 120 ohm
- * 3 = 40 ohm
- * 4 = 20 ohm
- * 5 = 30 ohm
- *
- * FIXME: Apparently 8641 needs a value of 2
- * FIXME: Old code seys if 667 MHz or higher, use 3 on 8572
- *
- * FIXME: There was some effort down this line earlier:
- *
- * unsigned int i;
- * for (i = 0; i < CONFIG_CHIP_SELECTS_PER_CTRL/2; i++) {
- * if (popts->dimmslot[i].num_valid_cs
- * && (popts->cs_local_opts[2*i].odt_rd_cfg
- * || popts->cs_local_opts[2*i].odt_wr_cfg)) {
- * rtt = 2;
- * break;
- * }
- * }
- */
-static inline int fsl_ddr_get_rtt(void)
-{
- int rtt;
-
-#if defined(CONFIG_FSL_DDR1)
- rtt = 0;
-#elif defined(CONFIG_FSL_DDR2)
- rtt = 3;
-#else
- rtt = 0;
-#endif
-
- return rtt;
-}
-
-/*
- * compute the CAS write latency according to DDR3 spec
- * CWL = 5 if tCK >= 2.5ns
- * 6 if 2.5ns > tCK >= 1.875ns
- * 7 if 1.875ns > tCK >= 1.5ns
- * 8 if 1.5ns > tCK >= 1.25ns
- * 9 if 1.25ns > tCK >= 1.07ns
- * 10 if 1.07ns > tCK >= 0.935ns
- * 11 if 0.935ns > tCK >= 0.833ns
- * 12 if 0.833ns > tCK >= 0.75ns
- */
-static inline unsigned int compute_cas_write_latency(void)
-{
- unsigned int cwl;
- const unsigned int mclk_ps = get_memory_clk_period_ps();
-
- if (mclk_ps >= 2500)
- cwl = 5;
- else if (mclk_ps >= 1875)
- cwl = 6;
- else if (mclk_ps >= 1500)
- cwl = 7;
- else if (mclk_ps >= 1250)
- cwl = 8;
- else if (mclk_ps >= 1070)
- cwl = 9;
- else if (mclk_ps >= 935)
- cwl = 10;
- else if (mclk_ps >= 833)
- cwl = 11;
- else if (mclk_ps >= 750)
- cwl = 12;
- else {
- cwl = 12;
- printf("Warning: CWL is out of range\n");
- }
- return cwl;
-}
-
-/* Chip Select Configuration (CSn_CONFIG) */
-static void set_csn_config(int dimm_number, int i, fsl_ddr_cfg_regs_t *ddr,
- const memctl_options_t *popts,
- const dimm_params_t *dimm_params)
-{
- unsigned int cs_n_en = 0; /* Chip Select enable */
- unsigned int intlv_en = 0; /* Memory controller interleave enable */
- unsigned int intlv_ctl = 0; /* Interleaving control */
- unsigned int ap_n_en = 0; /* Chip select n auto-precharge enable */
- unsigned int odt_rd_cfg = 0; /* ODT for reads configuration */
- unsigned int odt_wr_cfg = 0; /* ODT for writes configuration */
- unsigned int ba_bits_cs_n = 0; /* Num of bank bits for SDRAM on CSn */
- unsigned int row_bits_cs_n = 0; /* Num of row bits for SDRAM on CSn */
- unsigned int col_bits_cs_n = 0; /* Num of ocl bits for SDRAM on CSn */
- int go_config = 0;
-
- /* Compute CS_CONFIG only for existing ranks of each DIMM. */
- switch (i) {
- case 0:
- if (dimm_params[dimm_number].n_ranks > 0) {
- go_config = 1;
- /* These fields only available in CS0_CONFIG */
- if (!popts->memctl_interleaving)
- break;
- switch (popts->memctl_interleaving_mode) {
- case FSL_DDR_CACHE_LINE_INTERLEAVING:
- case FSL_DDR_PAGE_INTERLEAVING:
- case FSL_DDR_BANK_INTERLEAVING:
- case FSL_DDR_SUPERBANK_INTERLEAVING:
- intlv_en = popts->memctl_interleaving;
- intlv_ctl = popts->memctl_interleaving_mode;
- break;
- default:
- break;
- }
- }
- break;
- case 1:
- if ((dimm_number == 0 && dimm_params[0].n_ranks > 1) || \
- (dimm_number == 1 && dimm_params[1].n_ranks > 0))
- go_config = 1;
- break;
- case 2:
- if ((dimm_number == 0 && dimm_params[0].n_ranks > 2) || \
- (dimm_number >= 1 && dimm_params[dimm_number].n_ranks > 0))
- go_config = 1;
- break;
- case 3:
- if ((dimm_number == 0 && dimm_params[0].n_ranks > 3) || \
- (dimm_number == 1 && dimm_params[1].n_ranks > 1) || \
- (dimm_number == 3 && dimm_params[3].n_ranks > 0))
- go_config = 1;
- break;
- default:
- break;
- }
- if (go_config) {
- unsigned int n_banks_per_sdram_device;
- cs_n_en = 1;
- ap_n_en = popts->cs_local_opts[i].auto_precharge;
- odt_rd_cfg = popts->cs_local_opts[i].odt_rd_cfg;
- odt_wr_cfg = popts->cs_local_opts[i].odt_wr_cfg;
- n_banks_per_sdram_device
- = dimm_params[dimm_number].n_banks_per_sdram_device;
- ba_bits_cs_n = __ilog2(n_banks_per_sdram_device) - 2;
- row_bits_cs_n = dimm_params[dimm_number].n_row_addr - 12;
- col_bits_cs_n = dimm_params[dimm_number].n_col_addr - 8;
- }
- ddr->cs[i].config = (0
- | ((cs_n_en & 0x1) << 31)
- | ((intlv_en & 0x3) << 29)
- | ((intlv_ctl & 0xf) << 24)
- | ((ap_n_en & 0x1) << 23)
-
- /* XXX: some implementation only have 1 bit starting at left */
- | ((odt_rd_cfg & 0x7) << 20)
-
- /* XXX: Some implementation only have 1 bit starting at left */
- | ((odt_wr_cfg & 0x7) << 16)
-
- | ((ba_bits_cs_n & 0x3) << 14)
- | ((row_bits_cs_n & 0x7) << 8)
- | ((col_bits_cs_n & 0x7) << 0)
- );
- debug("FSLDDR: cs[%d]_config = 0x%08x\n", i,ddr->cs[i].config);
-}
-
-/* Chip Select Configuration 2 (CSn_CONFIG_2) */
-/* FIXME: 8572 */
-static void set_csn_config_2(int i, fsl_ddr_cfg_regs_t *ddr)
-{
- unsigned int pasr_cfg = 0; /* Partial array self refresh config */
-
- ddr->cs[i].config_2 = ((pasr_cfg & 7) << 24);
- debug("FSLDDR: cs[%d]_config_2 = 0x%08x\n", i, ddr->cs[i].config_2);
-}
-
-/* -3E = 667 CL5, -25 = CL6 800, -25E = CL5 800 */
-
-#if !defined(CONFIG_FSL_DDR1)
-static inline int avoid_odt_overlap(const dimm_params_t *dimm_params)
-{
-#if CONFIG_DIMM_SLOTS_PER_CTLR == 1
- if (dimm_params[0].n_ranks == 4)
- return 1;
-#endif
-
-#if CONFIG_DIMM_SLOTS_PER_CTLR == 2
- if ((dimm_params[0].n_ranks == 2) &&
- (dimm_params[1].n_ranks == 2))
- return 1;
-
-#ifdef CONFIG_FSL_DDR_FIRST_SLOT_QUAD_CAPABLE
- if (dimm_params[0].n_ranks == 4)
- return 1;
-#endif
-#endif
- return 0;
-}
-
-/*
- * DDR SDRAM Timing Configuration 0 (TIMING_CFG_0)
- *
- * Avoid writing for DDR I. The new PQ38 DDR controller
- * dreams up non-zero default values to be backwards compatible.
- */
-static void set_timing_cfg_0(fsl_ddr_cfg_regs_t *ddr,
- const memctl_options_t *popts,
- const dimm_params_t *dimm_params)
-{
- unsigned char trwt_mclk = 0; /* Read-to-write turnaround */
- unsigned char twrt_mclk = 0; /* Write-to-read turnaround */
- /* 7.5 ns on -3E; 0 means WL - CL + BL/2 + 1 */
- unsigned char trrt_mclk = 0; /* Read-to-read turnaround */
- unsigned char twwt_mclk = 0; /* Write-to-write turnaround */
-
- /* Active powerdown exit timing (tXARD and tXARDS). */
- unsigned char act_pd_exit_mclk;
- /* Precharge powerdown exit timing (tXP). */
- unsigned char pre_pd_exit_mclk;
- /* ODT powerdown exit timing (tAXPD). */
- unsigned char taxpd_mclk;
- /* Mode register set cycle time (tMRD). */
- unsigned char tmrd_mclk;
-
-#ifdef CONFIG_FSL_DDR3
- /*
- * (tXARD and tXARDS). Empirical?
- * The DDR3 spec has not tXARD,
- * we use the tXP instead of it.
- * tXP=max(3nCK, 7.5ns) for DDR3.
- * spec has not the tAXPD, we use
- * tAXPD=1, need design to confirm.
- */
- int tXP = max((get_memory_clk_period_ps() * 3), 7500); /* unit=ps */
- unsigned int data_rate = get_ddr_freq(0);
- tmrd_mclk = 4;
- /* set the turnaround time */
-
- /*
- * for single quad-rank DIMM and two dual-rank DIMMs
- * to avoid ODT overlap
- */
- if (avoid_odt_overlap(dimm_params)) {
- twwt_mclk = 2;
- trrt_mclk = 1;
- }
- /* for faster clock, need more time for data setup */
- trwt_mclk = (data_rate/1000000 > 1800) ? 2 : 1;
-
- if ((data_rate/1000000 > 1150) || (popts->memctl_interleaving))
- twrt_mclk = 1;
-
- if (popts->dynamic_power == 0) { /* powerdown is not used */
- act_pd_exit_mclk = 1;
- pre_pd_exit_mclk = 1;
- taxpd_mclk = 1;
- } else {
- /* act_pd_exit_mclk = tXARD, see above */
- act_pd_exit_mclk = picos_to_mclk(tXP);
- /* Mode register MR0[A12] is '1' - fast exit */
- pre_pd_exit_mclk = act_pd_exit_mclk;
- taxpd_mclk = 1;
- }
-#else /* CONFIG_FSL_DDR2 */
- /*
- * (tXARD and tXARDS). Empirical?
- * tXARD = 2 for DDR2
- * tXP=2
- * tAXPD=8
- */
- act_pd_exit_mclk = 2;
- pre_pd_exit_mclk = 2;
- taxpd_mclk = 8;
- tmrd_mclk = 2;
-#endif
-
- if (popts->trwt_override)
- trwt_mclk = popts->trwt;
-
- ddr->timing_cfg_0 = (0
- | ((trwt_mclk & 0x3) << 30) /* RWT */
- | ((twrt_mclk & 0x3) << 28) /* WRT */
- | ((trrt_mclk & 0x3) << 26) /* RRT */
- | ((twwt_mclk & 0x3) << 24) /* WWT */
- | ((act_pd_exit_mclk & 0x7) << 20) /* ACT_PD_EXIT */
- | ((pre_pd_exit_mclk & 0xF) << 16) /* PRE_PD_EXIT */
- | ((taxpd_mclk & 0xf) << 8) /* ODT_PD_EXIT */
- | ((tmrd_mclk & 0xf) << 0) /* MRS_CYC */
- );
- debug("FSLDDR: timing_cfg_0 = 0x%08x\n", ddr->timing_cfg_0);
-}
-#endif /* defined(CONFIG_FSL_DDR2) */
-
-/* DDR SDRAM Timing Configuration 3 (TIMING_CFG_3) */
-static void set_timing_cfg_3(fsl_ddr_cfg_regs_t *ddr,
- const memctl_options_t *popts,
- const common_timing_params_t *common_dimm,
- unsigned int cas_latency)
-{
- /* Extended precharge to activate interval (tRP) */
- unsigned int ext_pretoact = 0;
- /* Extended Activate to precharge interval (tRAS) */
- unsigned int ext_acttopre = 0;
- /* Extended activate to read/write interval (tRCD) */
- unsigned int ext_acttorw = 0;
- /* Extended refresh recovery time (tRFC) */
- unsigned int ext_refrec;
- /* Extended MCAS latency from READ cmd */
- unsigned int ext_caslat = 0;
- /* Extended last data to precharge interval (tWR) */
- unsigned int ext_wrrec = 0;
- /* Control Adjust */
- unsigned int cntl_adj = 0;
-
- ext_pretoact = picos_to_mclk(common_dimm->trp_ps) >> 4;
- ext_acttopre = picos_to_mclk(common_dimm->tras_ps) >> 4;
- ext_acttorw = picos_to_mclk(common_dimm->trcd_ps) >> 4;
- ext_caslat = (2 * cas_latency - 1) >> 4;
- ext_refrec = (picos_to_mclk(common_dimm->trfc_ps) - 8) >> 4;
- /* ext_wrrec only deals with 16 clock and above, or 14 with OTF */
- ext_wrrec = (picos_to_mclk(common_dimm->twr_ps) +
- (popts->otf_burst_chop_en ? 2 : 0)) >> 4;
-
- ddr->timing_cfg_3 = (0
- | ((ext_pretoact & 0x1) << 28)
- | ((ext_acttopre & 0x3) << 24)
- | ((ext_acttorw & 0x1) << 22)
- | ((ext_refrec & 0x1F) << 16)
- | ((ext_caslat & 0x3) << 12)
- | ((ext_wrrec & 0x1) << 8)
- | ((cntl_adj & 0x7) << 0)
- );
- debug("FSLDDR: timing_cfg_3 = 0x%08x\n", ddr->timing_cfg_3);
-}
-
-/* DDR SDRAM Timing Configuration 1 (TIMING_CFG_1) */
-static void set_timing_cfg_1(fsl_ddr_cfg_regs_t *ddr,
- const memctl_options_t *popts,
- const common_timing_params_t *common_dimm,
- unsigned int cas_latency)
-{
- /* Precharge-to-activate interval (tRP) */
- unsigned char pretoact_mclk;
- /* Activate to precharge interval (tRAS) */
- unsigned char acttopre_mclk;
- /* Activate to read/write interval (tRCD) */
- unsigned char acttorw_mclk;
- /* CASLAT */
- unsigned char caslat_ctrl;
- /* Refresh recovery time (tRFC) ; trfc_low */
- unsigned char refrec_ctrl;
- /* Last data to precharge minimum interval (tWR) */
- unsigned char wrrec_mclk;
- /* Activate-to-activate interval (tRRD) */
- unsigned char acttoact_mclk;
- /* Last write data pair to read command issue interval (tWTR) */
- unsigned char wrtord_mclk;
- /* DDR_SDRAM_MODE doesn't support 9,11,13,15 */
- static const u8 wrrec_table[] = {
- 1, 2, 3, 4, 5, 6, 7, 8, 10, 10, 12, 12, 14, 14, 0, 0};
-
- pretoact_mclk = picos_to_mclk(common_dimm->trp_ps);
- acttopre_mclk = picos_to_mclk(common_dimm->tras_ps);
- acttorw_mclk = picos_to_mclk(common_dimm->trcd_ps);
-
- /*
- * Translate CAS Latency to a DDR controller field value:
- *
- * CAS Lat DDR I DDR II Ctrl
- * Clocks SPD Bit SPD Bit Value
- * ------- ------- ------- -----
- * 1.0 0 0001
- * 1.5 1 0010
- * 2.0 2 2 0011
- * 2.5 3 0100
- * 3.0 4 3 0101
- * 3.5 5 0110
- * 4.0 4 0111
- * 4.5 1000
- * 5.0 5 1001
- */
-#if defined(CONFIG_FSL_DDR1)
- caslat_ctrl = (cas_latency + 1) & 0x07;
-#elif defined(CONFIG_FSL_DDR2)
- caslat_ctrl = 2 * cas_latency - 1;
-#else
- /*
- * if the CAS latency more than 8 cycle,
- * we need set extend bit for it at
- * TIMING_CFG_3[EXT_CASLAT]
- */
- caslat_ctrl = 2 * cas_latency - 1;
-#endif
-
- refrec_ctrl = picos_to_mclk(common_dimm->trfc_ps) - 8;
- wrrec_mclk = picos_to_mclk(common_dimm->twr_ps);
-
- if (wrrec_mclk > 16)
- printf("Error: WRREC doesn't support more than 16 clocks\n");
- else
- wrrec_mclk = wrrec_table[wrrec_mclk - 1];
- if (popts->otf_burst_chop_en)
- wrrec_mclk += 2;
-
- acttoact_mclk = picos_to_mclk(common_dimm->trrd_ps);
- /*
- * JEDEC has min requirement for tRRD
- */
-#if defined(CONFIG_FSL_DDR3)
- if (acttoact_mclk < 4)
- acttoact_mclk = 4;
-#endif
- wrtord_mclk = picos_to_mclk(common_dimm->twtr_ps);
- /*
- * JEDEC has some min requirements for tWTR
- */
-#if defined(CONFIG_FSL_DDR2)
- if (wrtord_mclk < 2)
- wrtord_mclk = 2;
-#elif defined(CONFIG_FSL_DDR3)
- if (wrtord_mclk < 4)
- wrtord_mclk = 4;
-#endif
- if (popts->otf_burst_chop_en)
- wrtord_mclk += 2;
-
- ddr->timing_cfg_1 = (0
- | ((pretoact_mclk & 0x0F) << 28)
- | ((acttopre_mclk & 0x0F) << 24)
- | ((acttorw_mclk & 0xF) << 20)
- | ((caslat_ctrl & 0xF) << 16)
- | ((refrec_ctrl & 0xF) << 12)
- | ((wrrec_mclk & 0x0F) << 8)
- | ((acttoact_mclk & 0x0F) << 4)
- | ((wrtord_mclk & 0x0F) << 0)
- );
- debug("FSLDDR: timing_cfg_1 = 0x%08x\n", ddr->timing_cfg_1);
-}
-
-/* DDR SDRAM Timing Configuration 2 (TIMING_CFG_2) */
-static void set_timing_cfg_2(fsl_ddr_cfg_regs_t *ddr,
- const memctl_options_t *popts,
- const common_timing_params_t *common_dimm,
- unsigned int cas_latency,
- unsigned int additive_latency)
-{
- /* Additive latency */
- unsigned char add_lat_mclk;
- /* CAS-to-preamble override */
- unsigned short cpo;
- /* Write latency */
- unsigned char wr_lat;
- /* Read to precharge (tRTP) */
- unsigned char rd_to_pre;
- /* Write command to write data strobe timing adjustment */
- unsigned char wr_data_delay;
- /* Minimum CKE pulse width (tCKE) */
- unsigned char cke_pls;
- /* Window for four activates (tFAW) */
- unsigned short four_act;
-
- /* FIXME add check that this must be less than acttorw_mclk */
- add_lat_mclk = additive_latency;
- cpo = popts->cpo_override;
-
-#if defined(CONFIG_FSL_DDR1)
- /*
- * This is a lie. It should really be 1, but if it is
- * set to 1, bits overlap into the old controller's
- * otherwise unused ACSM field. If we leave it 0, then
- * the HW will magically treat it as 1 for DDR 1. Oh Yea.
- */
- wr_lat = 0;
-#elif defined(CONFIG_FSL_DDR2)
- wr_lat = cas_latency - 1;
-#else
- wr_lat = compute_cas_write_latency();
-#endif
-
- rd_to_pre = picos_to_mclk(common_dimm->trtp_ps);
- /*
- * JEDEC has some min requirements for tRTP
- */
-#if defined(CONFIG_FSL_DDR2)
- if (rd_to_pre < 2)
- rd_to_pre = 2;
-#elif defined(CONFIG_FSL_DDR3)
- if (rd_to_pre < 4)
- rd_to_pre = 4;
-#endif
- if (additive_latency)
- rd_to_pre += additive_latency;
- if (popts->otf_burst_chop_en)
- rd_to_pre += 2; /* according to UM */
-
- wr_data_delay = popts->write_data_delay;
- cke_pls = picos_to_mclk(popts->tcke_clock_pulse_width_ps);
- four_act = picos_to_mclk(popts->tfaw_window_four_activates_ps);
-
- ddr->timing_cfg_2 = (0
- | ((add_lat_mclk & 0xf) << 28)
- | ((cpo & 0x1f) << 23)
- | ((wr_lat & 0xf) << 19)
- | ((rd_to_pre & RD_TO_PRE_MASK) << RD_TO_PRE_SHIFT)
- | ((wr_data_delay & WR_DATA_DELAY_MASK) << WR_DATA_DELAY_SHIFT)
- | ((cke_pls & 0x7) << 6)
- | ((four_act & 0x3f) << 0)
- );
- debug("FSLDDR: timing_cfg_2 = 0x%08x\n", ddr->timing_cfg_2);
-}
-
-/* DDR SDRAM Register Control Word */
-static void set_ddr_sdram_rcw(fsl_ddr_cfg_regs_t *ddr,
- const memctl_options_t *popts,
- const common_timing_params_t *common_dimm)
-{
- if (common_dimm->all_dimms_registered &&
- !common_dimm->all_dimms_unbuffered) {
- if (popts->rcw_override) {
- ddr->ddr_sdram_rcw_1 = popts->rcw_1;
- ddr->ddr_sdram_rcw_2 = popts->rcw_2;
- } else {
- ddr->ddr_sdram_rcw_1 =
- common_dimm->rcw[0] << 28 | \
- common_dimm->rcw[1] << 24 | \
- common_dimm->rcw[2] << 20 | \
- common_dimm->rcw[3] << 16 | \
- common_dimm->rcw[4] << 12 | \
- common_dimm->rcw[5] << 8 | \
- common_dimm->rcw[6] << 4 | \
- common_dimm->rcw[7];
- ddr->ddr_sdram_rcw_2 =
- common_dimm->rcw[8] << 28 | \
- common_dimm->rcw[9] << 24 | \
- common_dimm->rcw[10] << 20 | \
- common_dimm->rcw[11] << 16 | \
- common_dimm->rcw[12] << 12 | \
- common_dimm->rcw[13] << 8 | \
- common_dimm->rcw[14] << 4 | \
- common_dimm->rcw[15];
- }
- debug("FSLDDR: ddr_sdram_rcw_1 = 0x%08x\n", ddr->ddr_sdram_rcw_1);
- debug("FSLDDR: ddr_sdram_rcw_2 = 0x%08x\n", ddr->ddr_sdram_rcw_2);
- }
-}
-
-/* DDR SDRAM control configuration (DDR_SDRAM_CFG) */
-static void set_ddr_sdram_cfg(fsl_ddr_cfg_regs_t *ddr,
- const memctl_options_t *popts,
- const common_timing_params_t *common_dimm)
-{
- unsigned int mem_en; /* DDR SDRAM interface logic enable */
- unsigned int sren; /* Self refresh enable (during sleep) */
- unsigned int ecc_en; /* ECC enable. */
- unsigned int rd_en; /* Registered DIMM enable */
- unsigned int sdram_type; /* Type of SDRAM */
- unsigned int dyn_pwr; /* Dynamic power management mode */
- unsigned int dbw; /* DRAM dta bus width */
- unsigned int eight_be = 0; /* 8-beat burst enable, DDR2 is zero */
- unsigned int ncap = 0; /* Non-concurrent auto-precharge */
- unsigned int threet_en; /* Enable 3T timing */
- unsigned int twot_en; /* Enable 2T timing */
- unsigned int ba_intlv_ctl; /* Bank (CS) interleaving control */
- unsigned int x32_en = 0; /* x32 enable */
- unsigned int pchb8 = 0; /* precharge bit 8 enable */
- unsigned int hse; /* Global half strength override */
- unsigned int mem_halt = 0; /* memory controller halt */
- unsigned int bi = 0; /* Bypass initialization */
-
- mem_en = 1;
- sren = popts->self_refresh_in_sleep;
- if (common_dimm->all_dimms_ecc_capable) {
- /* Allow setting of ECC only if all DIMMs are ECC. */
- ecc_en = popts->ecc_mode;
- } else {
- ecc_en = 0;
- }
-
- if (common_dimm->all_dimms_registered &&
- !common_dimm->all_dimms_unbuffered) {
- rd_en = 1;
- twot_en = 0;
- } else {
- rd_en = 0;
- twot_en = popts->twot_en;
- }
-
- sdram_type = CONFIG_FSL_SDRAM_TYPE;
-
- dyn_pwr = popts->dynamic_power;
- dbw = popts->data_bus_width;
- /* 8-beat burst enable DDR-III case
- * we must clear it when use the on-the-fly mode,
- * must set it when use the 32-bits bus mode.
- */
- if (sdram_type == SDRAM_TYPE_DDR3) {
- if (popts->burst_length == DDR_BL8)
- eight_be = 1;
- if (popts->burst_length == DDR_OTF)
- eight_be = 0;
- if (dbw == 0x1)
- eight_be = 1;
- }
-
- threet_en = popts->threet_en;
- ba_intlv_ctl = popts->ba_intlv_ctl;
- hse = popts->half_strength_driver_enable;
-
- ddr->ddr_sdram_cfg = (0
- | ((mem_en & 0x1) << 31)
- | ((sren & 0x1) << 30)
- | ((ecc_en & 0x1) << 29)
- | ((rd_en & 0x1) << 28)
- | ((sdram_type & 0x7) << 24)
- | ((dyn_pwr & 0x1) << 21)
- | ((dbw & 0x3) << 19)
- | ((eight_be & 0x1) << 18)
- | ((ncap & 0x1) << 17)
- | ((threet_en & 0x1) << 16)
- | ((twot_en & 0x1) << 15)
- | ((ba_intlv_ctl & 0x7F) << 8)
- | ((x32_en & 0x1) << 5)
- | ((pchb8 & 0x1) << 4)
- | ((hse & 0x1) << 3)
- | ((mem_halt & 0x1) << 1)
- | ((bi & 0x1) << 0)
- );
- debug("FSLDDR: ddr_sdram_cfg = 0x%08x\n", ddr->ddr_sdram_cfg);
-}
-
-/* DDR SDRAM control configuration 2 (DDR_SDRAM_CFG_2) */
-static void set_ddr_sdram_cfg_2(fsl_ddr_cfg_regs_t *ddr,
- const memctl_options_t *popts,
- const unsigned int unq_mrs_en)
-{
- unsigned int frc_sr = 0; /* Force self refresh */
- unsigned int sr_ie = 0; /* Self-refresh interrupt enable */
- unsigned int dll_rst_dis; /* DLL reset disable */
- unsigned int dqs_cfg; /* DQS configuration */
- unsigned int odt_cfg = 0; /* ODT configuration */
- unsigned int num_pr; /* Number of posted refreshes */
- unsigned int slow = 0; /* DDR will be run less than 1250 */
- unsigned int x4_en = 0; /* x4 DRAM enable */
- unsigned int obc_cfg; /* On-The-Fly Burst Chop Cfg */
- unsigned int ap_en; /* Address Parity Enable */
- unsigned int d_init; /* DRAM data initialization */
- unsigned int rcw_en = 0; /* Register Control Word Enable */
- unsigned int md_en = 0; /* Mirrored DIMM Enable */
- unsigned int qd_en = 0; /* quad-rank DIMM Enable */
- int i;
-
- dll_rst_dis = 1; /* Make this configurable */
- dqs_cfg = popts->dqs_config;
- for (i = 0; i < CONFIG_CHIP_SELECTS_PER_CTRL; i++) {
- if (popts->cs_local_opts[i].odt_rd_cfg
- || popts->cs_local_opts[i].odt_wr_cfg) {
- odt_cfg = SDRAM_CFG2_ODT_ONLY_READ;
- break;
- }
- }
-
- num_pr = 1; /* Make this configurable */
-
- /*
- * 8572 manual says
- * {TIMING_CFG_1[PRETOACT]
- * + [DDR_SDRAM_CFG_2[NUM_PR]
- * * ({EXT_REFREC || REFREC} + 8 + 2)]}
- * << DDR_SDRAM_INTERVAL[REFINT]
- */
-#if defined(CONFIG_FSL_DDR3)
- obc_cfg = popts->otf_burst_chop_en;
-#else
- obc_cfg = 0;
-#endif
-
-#if (CONFIG_SYS_FSL_DDR_VER >= FSL_DDR_VER_4_7)
- slow = get_ddr_freq(0) < 1249000000;
-#endif
-
- if (popts->registered_dimm_en) {
- rcw_en = 1;
- ap_en = popts->ap_en;
- } else {
- ap_en = 0;
- }
-
- x4_en = popts->x4_en ? 1 : 0;
-
-#if defined(CONFIG_ECC_INIT_VIA_DDRCONTROLLER)
- /* Use the DDR controller to auto initialize memory. */
- d_init = popts->ecc_init_using_memctl;
- ddr->ddr_data_init = CONFIG_MEM_INIT_VALUE;
- debug("DDR: ddr_data_init = 0x%08x\n", ddr->ddr_data_init);
-#else
- /* Memory will be initialized via DMA, or not at all. */
- d_init = 0;
-#endif
-
-#if defined(CONFIG_FSL_DDR3)
- md_en = popts->mirrored_dimm;
-#endif
- qd_en = popts->quad_rank_present ? 1 : 0;
- ddr->ddr_sdram_cfg_2 = (0
- | ((frc_sr & 0x1) << 31)
- | ((sr_ie & 0x1) << 30)
- | ((dll_rst_dis & 0x1) << 29)
- | ((dqs_cfg & 0x3) << 26)
- | ((odt_cfg & 0x3) << 21)
- | ((num_pr & 0xf) << 12)
- | ((slow & 1) << 11)
- | (x4_en << 10)
- | (qd_en << 9)
- | (unq_mrs_en << 8)
- | ((obc_cfg & 0x1) << 6)
- | ((ap_en & 0x1) << 5)
- | ((d_init & 0x1) << 4)
- | ((rcw_en & 0x1) << 2)
- | ((md_en & 0x1) << 0)
- );
- debug("FSLDDR: ddr_sdram_cfg_2 = 0x%08x\n", ddr->ddr_sdram_cfg_2);
-}
-
-/* DDR SDRAM Mode configuration 2 (DDR_SDRAM_MODE_2) */
-static void set_ddr_sdram_mode_2(fsl_ddr_cfg_regs_t *ddr,
- const memctl_options_t *popts,
- const common_timing_params_t *common_dimm,
- const unsigned int unq_mrs_en)
-{
- unsigned short esdmode2 = 0; /* Extended SDRAM mode 2 */
- unsigned short esdmode3 = 0; /* Extended SDRAM mode 3 */
-
-#if defined(CONFIG_FSL_DDR3)
- int i;
- unsigned int rtt_wr = 0; /* Rtt_WR - dynamic ODT off */
- unsigned int srt = 0; /* self-refresh temerature, normal range */
- unsigned int asr = 0; /* auto self-refresh disable */
- unsigned int cwl = compute_cas_write_latency() - 5;
- unsigned int pasr = 0; /* partial array self refresh disable */
-
- if (popts->rtt_override)
- rtt_wr = popts->rtt_wr_override_value;
- else
- rtt_wr = popts->cs_local_opts[0].odt_rtt_wr;
-
- if (common_dimm->extended_op_srt)
- srt = common_dimm->extended_op_srt;
-
- esdmode2 = (0
- | ((rtt_wr & 0x3) << 9)
- | ((srt & 0x1) << 7)
- | ((asr & 0x1) << 6)
- | ((cwl & 0x7) << 3)
- | ((pasr & 0x7) << 0));
-#endif
- ddr->ddr_sdram_mode_2 = (0
- | ((esdmode2 & 0xFFFF) << 16)
- | ((esdmode3 & 0xFFFF) << 0)
- );
- debug("FSLDDR: ddr_sdram_mode_2 = 0x%08x\n", ddr->ddr_sdram_mode_2);
-
-#ifdef CONFIG_FSL_DDR3
- if (unq_mrs_en) { /* unique mode registers are supported */
- for (i = 1; i < CONFIG_CHIP_SELECTS_PER_CTRL; i++) {
- if (popts->rtt_override)
- rtt_wr = popts->rtt_wr_override_value;
- else
- rtt_wr = popts->cs_local_opts[i].odt_rtt_wr;
-
- esdmode2 &= 0xF9FF; /* clear bit 10, 9 */
- esdmode2 |= (rtt_wr & 0x3) << 9;
- switch (i) {
- case 1:
- ddr->ddr_sdram_mode_4 = (0
- | ((esdmode2 & 0xFFFF) << 16)
- | ((esdmode3 & 0xFFFF) << 0)
- );
- break;
- case 2:
- ddr->ddr_sdram_mode_6 = (0
- | ((esdmode2 & 0xFFFF) << 16)
- | ((esdmode3 & 0xFFFF) << 0)
- );
- break;
- case 3:
- ddr->ddr_sdram_mode_8 = (0
- | ((esdmode2 & 0xFFFF) << 16)
- | ((esdmode3 & 0xFFFF) << 0)
- );
- break;
- }
- }
- debug("FSLDDR: ddr_sdram_mode_4 = 0x%08x\n",
- ddr->ddr_sdram_mode_4);
- debug("FSLDDR: ddr_sdram_mode_6 = 0x%08x\n",
- ddr->ddr_sdram_mode_6);
- debug("FSLDDR: ddr_sdram_mode_8 = 0x%08x\n",
- ddr->ddr_sdram_mode_8);
- }
-#endif
-}
-
-/* DDR SDRAM Interval Configuration (DDR_SDRAM_INTERVAL) */
-static void set_ddr_sdram_interval(fsl_ddr_cfg_regs_t *ddr,
- const memctl_options_t *popts,
- const common_timing_params_t *common_dimm)
-{
- unsigned int refint; /* Refresh interval */
- unsigned int bstopre; /* Precharge interval */
-
- refint = picos_to_mclk(common_dimm->refresh_rate_ps);
-
- bstopre = popts->bstopre;
-
- /* refint field used 0x3FFF in earlier controllers */
- ddr->ddr_sdram_interval = (0
- | ((refint & 0xFFFF) << 16)
- | ((bstopre & 0x3FFF) << 0)
- );
- debug("FSLDDR: ddr_sdram_interval = 0x%08x\n", ddr->ddr_sdram_interval);
-}
-
-#if defined(CONFIG_FSL_DDR3)
-/* DDR SDRAM Mode configuration set (DDR_SDRAM_MODE) */
-static void set_ddr_sdram_mode(fsl_ddr_cfg_regs_t *ddr,
- const memctl_options_t *popts,
- const common_timing_params_t *common_dimm,
- unsigned int cas_latency,
- unsigned int additive_latency,
- const unsigned int unq_mrs_en)
-{
- unsigned short esdmode; /* Extended SDRAM mode */
- unsigned short sdmode; /* SDRAM mode */
-
- /* Mode Register - MR1 */
- unsigned int qoff = 0; /* Output buffer enable 0=yes, 1=no */
- unsigned int tdqs_en = 0; /* TDQS Enable: 0=no, 1=yes */
- unsigned int rtt;
- unsigned int wrlvl_en = 0; /* Write level enable: 0=no, 1=yes */
- unsigned int al = 0; /* Posted CAS# additive latency (AL) */
- unsigned int dic = 0; /* Output driver impedance, 40ohm */
- unsigned int dll_en = 0; /* DLL Enable 0=Enable (Normal),
- 1=Disable (Test/Debug) */
-
- /* Mode Register - MR0 */
- unsigned int dll_on; /* DLL control for precharge PD, 0=off, 1=on */
- unsigned int wr = 0; /* Write Recovery */
- unsigned int dll_rst; /* DLL Reset */
- unsigned int mode; /* Normal=0 or Test=1 */
- unsigned int caslat = 4;/* CAS# latency, default set as 6 cycles */
- /* BT: Burst Type (0=Nibble Sequential, 1=Interleaved) */
- unsigned int bt;
- unsigned int bl; /* BL: Burst Length */
-
- unsigned int wr_mclk;
- /*
- * DDR_SDRAM_MODE doesn't support 9,11,13,15
- * Please refer JEDEC Standard No. 79-3E for Mode Register MR0
- * for this table
- */
- static const u8 wr_table[] = {1, 2, 3, 4, 5, 5, 6, 6, 7, 7, 0, 0};
-
- const unsigned int mclk_ps = get_memory_clk_period_ps();
- int i;
-
- if (popts->rtt_override)
- rtt = popts->rtt_override_value;
- else
- rtt = popts->cs_local_opts[0].odt_rtt_norm;
-
- if (additive_latency == (cas_latency - 1))
- al = 1;
- if (additive_latency == (cas_latency - 2))
- al = 2;
-
- if (popts->quad_rank_present)
- dic = 1; /* output driver impedance 240/7 ohm */
-
- /*
- * The esdmode value will also be used for writing
- * MR1 during write leveling for DDR3, although the
- * bits specifically related to the write leveling
- * scheme will be handled automatically by the DDR
- * controller. so we set the wrlvl_en = 0 here.
- */
- esdmode = (0
- | ((qoff & 0x1) << 12)
- | ((tdqs_en & 0x1) << 11)
- | ((rtt & 0x4) << 7) /* rtt field is split */
- | ((wrlvl_en & 0x1) << 7)
- | ((rtt & 0x2) << 5) /* rtt field is split */
- | ((dic & 0x2) << 4) /* DIC field is split */
- | ((al & 0x3) << 3)
- | ((rtt & 0x1) << 2) /* rtt field is split */
- | ((dic & 0x1) << 1) /* DIC field is split */
- | ((dll_en & 0x1) << 0)
- );
-
- /*
- * DLL control for precharge PD
- * 0=slow exit DLL off (tXPDLL)
- * 1=fast exit DLL on (tXP)
- */
- dll_on = 1;
-
- wr_mclk = (common_dimm->twr_ps + mclk_ps - 1) / mclk_ps;
- if (wr_mclk <= 16) {
- wr = wr_table[wr_mclk - 5];
- } else {
- printf("Error: unsupported write recovery for mode register "
- "wr_mclk = %d\n", wr_mclk);
- }
-
- dll_rst = 0; /* dll no reset */
- mode = 0; /* normal mode */
-
- /* look up table to get the cas latency bits */
- if (cas_latency >= 5 && cas_latency <= 16) {
- unsigned char cas_latency_table[] = {
- 0x2, /* 5 clocks */
- 0x4, /* 6 clocks */
- 0x6, /* 7 clocks */
- 0x8, /* 8 clocks */
- 0xa, /* 9 clocks */
- 0xc, /* 10 clocks */
- 0xe, /* 11 clocks */
- 0x1, /* 12 clocks */
- 0x3, /* 13 clocks */
- 0x5, /* 14 clocks */
- 0x7, /* 15 clocks */
- 0x9, /* 16 clocks */
- };
- caslat = cas_latency_table[cas_latency - 5];
- } else {
- printf("Error: unsupported cas latency for mode register\n");
- }
-
- bt = 0; /* Nibble sequential */
-
- switch (popts->burst_length) {
- case DDR_BL8:
- bl = 0;
- break;
- case DDR_OTF:
- bl = 1;
- break;
- case DDR_BC4:
- bl = 2;
- break;
- default:
- printf("Error: invalid burst length of %u specified. "
- " Defaulting to on-the-fly BC4 or BL8 beats.\n",
- popts->burst_length);
- bl = 1;
- break;
- }
-
- sdmode = (0
- | ((dll_on & 0x1) << 12)
- | ((wr & 0x7) << 9)
- | ((dll_rst & 0x1) << 8)
- | ((mode & 0x1) << 7)
- | (((caslat >> 1) & 0x7) << 4)
- | ((bt & 0x1) << 3)
- | ((caslat & 1) << 2)
- | ((bl & 0x3) << 0)
- );
-
- ddr->ddr_sdram_mode = (0
- | ((esdmode & 0xFFFF) << 16)
- | ((sdmode & 0xFFFF) << 0)
- );
-
- debug("FSLDDR: ddr_sdram_mode = 0x%08x\n", ddr->ddr_sdram_mode);
-
- if (unq_mrs_en) { /* unique mode registers are supported */
- for (i = 1; i < CONFIG_CHIP_SELECTS_PER_CTRL; i++) {
- if (popts->rtt_override)
- rtt = popts->rtt_override_value;
- else
- rtt = popts->cs_local_opts[i].odt_rtt_norm;
-
- esdmode &= 0xFDBB; /* clear bit 9,6,2 */
- esdmode |= (0
- | ((rtt & 0x4) << 7) /* rtt field is split */
- | ((rtt & 0x2) << 5) /* rtt field is split */
- | ((rtt & 0x1) << 2) /* rtt field is split */
- );
- switch (i) {
- case 1:
- ddr->ddr_sdram_mode_3 = (0
- | ((esdmode & 0xFFFF) << 16)
- | ((sdmode & 0xFFFF) << 0)
- );
- break;
- case 2:
- ddr->ddr_sdram_mode_5 = (0
- | ((esdmode & 0xFFFF) << 16)
- | ((sdmode & 0xFFFF) << 0)
- );
- break;
- case 3:
- ddr->ddr_sdram_mode_7 = (0
- | ((esdmode & 0xFFFF) << 16)
- | ((sdmode & 0xFFFF) << 0)
- );
- break;
- }
- }
- debug("FSLDDR: ddr_sdram_mode_3 = 0x%08x\n",
- ddr->ddr_sdram_mode_3);
- debug("FSLDDR: ddr_sdram_mode_5 = 0x%08x\n",
- ddr->ddr_sdram_mode_5);
- debug("FSLDDR: ddr_sdram_mode_5 = 0x%08x\n",
- ddr->ddr_sdram_mode_5);
- }
-}
-
-#else /* !CONFIG_FSL_DDR3 */
-
-/* DDR SDRAM Mode configuration set (DDR_SDRAM_MODE) */
-static void set_ddr_sdram_mode(fsl_ddr_cfg_regs_t *ddr,
- const memctl_options_t *popts,
- const common_timing_params_t *common_dimm,
- unsigned int cas_latency,
- unsigned int additive_latency,
- const unsigned int unq_mrs_en)
-{
- unsigned short esdmode; /* Extended SDRAM mode */
- unsigned short sdmode; /* SDRAM mode */
-
- /*
- * FIXME: This ought to be pre-calculated in a
- * technology-specific routine,
- * e.g. compute_DDR2_mode_register(), and then the
- * sdmode and esdmode passed in as part of common_dimm.
- */
-
- /* Extended Mode Register */
- unsigned int mrs = 0; /* Mode Register Set */
- unsigned int outputs = 0; /* 0=Enabled, 1=Disabled */
- unsigned int rdqs_en = 0; /* RDQS Enable: 0=no, 1=yes */
- unsigned int dqs_en = 0; /* DQS# Enable: 0=enable, 1=disable */
- unsigned int ocd = 0; /* 0x0=OCD not supported,
- 0x7=OCD default state */
- unsigned int rtt;
- unsigned int al; /* Posted CAS# additive latency (AL) */
- unsigned int ods = 0; /* Output Drive Strength:
- 0 = Full strength (18ohm)
- 1 = Reduced strength (4ohm) */
- unsigned int dll_en = 0; /* DLL Enable 0=Enable (Normal),
- 1=Disable (Test/Debug) */
-
- /* Mode Register (MR) */
- unsigned int mr; /* Mode Register Definition */
- unsigned int pd; /* Power-Down Mode */
- unsigned int wr; /* Write Recovery */
- unsigned int dll_res; /* DLL Reset */
- unsigned int mode; /* Normal=0 or Test=1 */
- unsigned int caslat = 0;/* CAS# latency */
- /* BT: Burst Type (0=Sequential, 1=Interleaved) */
- unsigned int bt;
- unsigned int bl; /* BL: Burst Length */
-
-#if defined(CONFIG_FSL_DDR2)
- const unsigned int mclk_ps = get_memory_clk_period_ps();
-#endif
- dqs_en = !popts->dqs_config;
- rtt = fsl_ddr_get_rtt();
-
- al = additive_latency;
-
- esdmode = (0
- | ((mrs & 0x3) << 14)
- | ((outputs & 0x1) << 12)
- | ((rdqs_en & 0x1) << 11)
- | ((dqs_en & 0x1) << 10)
- | ((ocd & 0x7) << 7)
- | ((rtt & 0x2) << 5) /* rtt field is split */
- | ((al & 0x7) << 3)
- | ((rtt & 0x1) << 2) /* rtt field is split */
- | ((ods & 0x1) << 1)
- | ((dll_en & 0x1) << 0)
- );
-
- mr = 0; /* FIXME: CHECKME */
-
- /*
- * 0 = Fast Exit (Normal)
- * 1 = Slow Exit (Low Power)
- */
- pd = 0;
-
-#if defined(CONFIG_FSL_DDR1)
- wr = 0; /* Historical */
-#elif defined(CONFIG_FSL_DDR2)
- wr = (common_dimm->twr_ps + mclk_ps - 1) / mclk_ps - 1;
-#endif
- dll_res = 0;
- mode = 0;
-
-#if defined(CONFIG_FSL_DDR1)
- if (1 <= cas_latency && cas_latency <= 4) {
- unsigned char mode_caslat_table[4] = {
- 0x5, /* 1.5 clocks */
- 0x2, /* 2.0 clocks */
- 0x6, /* 2.5 clocks */
- 0x3 /* 3.0 clocks */
- };
- caslat = mode_caslat_table[cas_latency - 1];
- } else {
- printf("Warning: unknown cas_latency %d\n", cas_latency);
- }
-#elif defined(CONFIG_FSL_DDR2)
- caslat = cas_latency;
-#endif
- bt = 0;
-
- switch (popts->burst_length) {
- case DDR_BL4:
- bl = 2;
- break;
- case DDR_BL8:
- bl = 3;
- break;
- default:
- printf("Error: invalid burst length of %u specified. "
- " Defaulting to 4 beats.\n",
- popts->burst_length);
- bl = 2;
- break;
- }
-
- sdmode = (0
- | ((mr & 0x3) << 14)
- | ((pd & 0x1) << 12)
- | ((wr & 0x7) << 9)
- | ((dll_res & 0x1) << 8)
- | ((mode & 0x1) << 7)
- | ((caslat & 0x7) << 4)
- | ((bt & 0x1) << 3)
- | ((bl & 0x7) << 0)
- );
-
- ddr->ddr_sdram_mode = (0
- | ((esdmode & 0xFFFF) << 16)
- | ((sdmode & 0xFFFF) << 0)
- );
- debug("FSLDDR: ddr_sdram_mode = 0x%08x\n", ddr->ddr_sdram_mode);
-}
-#endif
-
-/* DDR SDRAM Data Initialization (DDR_DATA_INIT) */
-static void set_ddr_data_init(fsl_ddr_cfg_regs_t *ddr)
-{
- unsigned int init_value; /* Initialization value */
-
-#ifdef CONFIG_MEM_INIT_VALUE
- init_value = CONFIG_MEM_INIT_VALUE;
-#else
- init_value = 0xDEADBEEF;
-#endif
- ddr->ddr_data_init = init_value;
-}
-
-/*
- * DDR SDRAM Clock Control (DDR_SDRAM_CLK_CNTL)
- * The old controller on the 8540/60 doesn't have this register.
- * Hope it's OK to set it (to 0) anyway.
- */
-static void set_ddr_sdram_clk_cntl(fsl_ddr_cfg_regs_t *ddr,
- const memctl_options_t *popts)
-{
- unsigned int clk_adjust; /* Clock adjust */
-
- clk_adjust = popts->clk_adjust;
- ddr->ddr_sdram_clk_cntl = (clk_adjust & 0xF) << 23;
- debug("FSLDDR: clk_cntl = 0x%08x\n", ddr->ddr_sdram_clk_cntl);
-}
-
-/* DDR Initialization Address (DDR_INIT_ADDR) */
-static void set_ddr_init_addr(fsl_ddr_cfg_regs_t *ddr)
-{
- unsigned int init_addr = 0; /* Initialization address */
-
- ddr->ddr_init_addr = init_addr;
-}
-
-/* DDR Initialization Address (DDR_INIT_EXT_ADDR) */
-static void set_ddr_init_ext_addr(fsl_ddr_cfg_regs_t *ddr)
-{
- unsigned int uia = 0; /* Use initialization address */
- unsigned int init_ext_addr = 0; /* Initialization address */
-
- ddr->ddr_init_ext_addr = (0
- | ((uia & 0x1) << 31)
- | (init_ext_addr & 0xF)
- );
-}
-
-/* DDR SDRAM Timing Configuration 4 (TIMING_CFG_4) */
-static void set_timing_cfg_4(fsl_ddr_cfg_regs_t *ddr,
- const memctl_options_t *popts)
-{
- unsigned int rwt = 0; /* Read-to-write turnaround for same CS */
- unsigned int wrt = 0; /* Write-to-read turnaround for same CS */
- unsigned int rrt = 0; /* Read-to-read turnaround for same CS */
- unsigned int wwt = 0; /* Write-to-write turnaround for same CS */
- unsigned int dll_lock = 0; /* DDR SDRAM DLL Lock Time */
-
-#if defined(CONFIG_FSL_DDR3)
- if (popts->burst_length == DDR_BL8) {
- /* We set BL/2 for fixed BL8 */
- rrt = 0; /* BL/2 clocks */
- wwt = 0; /* BL/2 clocks */
- } else {
- /* We need to set BL/2 + 2 to BC4 and OTF */
- rrt = 2; /* BL/2 + 2 clocks */
- wwt = 2; /* BL/2 + 2 clocks */
- }
- dll_lock = 1; /* tDLLK = 512 clocks from spec */
-#endif
- ddr->timing_cfg_4 = (0
- | ((rwt & 0xf) << 28)
- | ((wrt & 0xf) << 24)
- | ((rrt & 0xf) << 20)
- | ((wwt & 0xf) << 16)
- | (dll_lock & 0x3)
- );
- debug("FSLDDR: timing_cfg_4 = 0x%08x\n", ddr->timing_cfg_4);
-}
-
-/* DDR SDRAM Timing Configuration 5 (TIMING_CFG_5) */
-static void set_timing_cfg_5(fsl_ddr_cfg_regs_t *ddr, unsigned int cas_latency)
-{
- unsigned int rodt_on = 0; /* Read to ODT on */
- unsigned int rodt_off = 0; /* Read to ODT off */
- unsigned int wodt_on = 0; /* Write to ODT on */
- unsigned int wodt_off = 0; /* Write to ODT off */
-
-#if defined(CONFIG_FSL_DDR3)
- /* rodt_on = timing_cfg_1[caslat] - timing_cfg_2[wrlat] + 1 */
- rodt_on = cas_latency - ((ddr->timing_cfg_2 & 0x00780000) >> 19) + 1;
- rodt_off = 4; /* 4 clocks */
- wodt_on = 1; /* 1 clocks */
- wodt_off = 4; /* 4 clocks */
-#endif
-
- ddr->timing_cfg_5 = (0
- | ((rodt_on & 0x1f) << 24)
- | ((rodt_off & 0x7) << 20)
- | ((wodt_on & 0x1f) << 12)
- | ((wodt_off & 0x7) << 8)
- );
- debug("FSLDDR: timing_cfg_5 = 0x%08x\n", ddr->timing_cfg_5);
-}
-
-/* DDR ZQ Calibration Control (DDR_ZQ_CNTL) */
-static void set_ddr_zq_cntl(fsl_ddr_cfg_regs_t *ddr, unsigned int zq_en)
-{
- unsigned int zqinit = 0;/* POR ZQ Calibration Time (tZQinit) */
- /* Normal Operation Full Calibration Time (tZQoper) */
- unsigned int zqoper = 0;
- /* Normal Operation Short Calibration Time (tZQCS) */
- unsigned int zqcs = 0;
-
- if (zq_en) {
- zqinit = 9; /* 512 clocks */
- zqoper = 8; /* 256 clocks */
- zqcs = 6; /* 64 clocks */
- }
-
- ddr->ddr_zq_cntl = (0
- | ((zq_en & 0x1) << 31)
- | ((zqinit & 0xF) << 24)
- | ((zqoper & 0xF) << 16)
- | ((zqcs & 0xF) << 8)
- );
- debug("FSLDDR: zq_cntl = 0x%08x\n", ddr->ddr_zq_cntl);
-}
-
-/* DDR Write Leveling Control (DDR_WRLVL_CNTL) */
-static void set_ddr_wrlvl_cntl(fsl_ddr_cfg_regs_t *ddr, unsigned int wrlvl_en,
- const memctl_options_t *popts)
-{
- /*
- * First DQS pulse rising edge after margining mode
- * is programmed (tWL_MRD)
- */
- unsigned int wrlvl_mrd = 0;
- /* ODT delay after margining mode is programmed (tWL_ODTEN) */
- unsigned int wrlvl_odten = 0;
- /* DQS/DQS_ delay after margining mode is programmed (tWL_DQSEN) */
- unsigned int wrlvl_dqsen = 0;
- /* WRLVL_SMPL: Write leveling sample time */
- unsigned int wrlvl_smpl = 0;
- /* WRLVL_WLR: Write leveling repeition time */
- unsigned int wrlvl_wlr = 0;
- /* WRLVL_START: Write leveling start time */
- unsigned int wrlvl_start = 0;
-
- /* suggest enable write leveling for DDR3 due to fly-by topology */
- if (wrlvl_en) {
- /* tWL_MRD min = 40 nCK, we set it 64 */
- wrlvl_mrd = 0x6;
- /* tWL_ODTEN 128 */
- wrlvl_odten = 0x7;
- /* tWL_DQSEN min = 25 nCK, we set it 32 */
- wrlvl_dqsen = 0x5;
- /*
- * Write leveling sample time at least need 6 clocks
- * higher than tWLO to allow enough time for progagation
- * delay and sampling the prime data bits.
- */
- wrlvl_smpl = 0xf;
- /*
- * Write leveling repetition time
- * at least tWLO + 6 clocks clocks
- * we set it 64
- */
- wrlvl_wlr = 0x6;
- /*
- * Write leveling start time
- * The value use for the DQS_ADJUST for the first sample
- * when write leveling is enabled. It probably needs to be
- * overriden per platform.
- */
- wrlvl_start = 0x8;
- /*
- * Override the write leveling sample and start time
- * according to specific board
- */
- if (popts->wrlvl_override) {
- wrlvl_smpl = popts->wrlvl_sample;
- wrlvl_start = popts->wrlvl_start;
- }
- }
-
- ddr->ddr_wrlvl_cntl = (0
- | ((wrlvl_en & 0x1) << 31)
- | ((wrlvl_mrd & 0x7) << 24)
- | ((wrlvl_odten & 0x7) << 20)
- | ((wrlvl_dqsen & 0x7) << 16)
- | ((wrlvl_smpl & 0xf) << 12)
- | ((wrlvl_wlr & 0x7) << 8)
- | ((wrlvl_start & 0x1F) << 0)
- );
- debug("FSLDDR: wrlvl_cntl = 0x%08x\n", ddr->ddr_wrlvl_cntl);
- ddr->ddr_wrlvl_cntl_2 = popts->wrlvl_ctl_2;
- debug("FSLDDR: wrlvl_cntl_2 = 0x%08x\n", ddr->ddr_wrlvl_cntl_2);
- ddr->ddr_wrlvl_cntl_3 = popts->wrlvl_ctl_3;
- debug("FSLDDR: wrlvl_cntl_3 = 0x%08x\n", ddr->ddr_wrlvl_cntl_3);
-
-}
-
-/* DDR Self Refresh Counter (DDR_SR_CNTR) */
-static void set_ddr_sr_cntr(fsl_ddr_cfg_regs_t *ddr, unsigned int sr_it)
-{
- /* Self Refresh Idle Threshold */
- ddr->ddr_sr_cntr = (sr_it & 0xF) << 16;
-}
-
-static void set_ddr_eor(fsl_ddr_cfg_regs_t *ddr, const memctl_options_t *popts)
-{
- if (popts->addr_hash) {
- ddr->ddr_eor = 0x40000000; /* address hash enable */
- puts("Address hashing enabled.\n");
- }
-}
-
-static void set_ddr_cdr1(fsl_ddr_cfg_regs_t *ddr, const memctl_options_t *popts)
-{
- ddr->ddr_cdr1 = popts->ddr_cdr1;
- debug("FSLDDR: ddr_cdr1 = 0x%08x\n", ddr->ddr_cdr1);
-}
-
-static void set_ddr_cdr2(fsl_ddr_cfg_regs_t *ddr, const memctl_options_t *popts)
-{
- ddr->ddr_cdr2 = popts->ddr_cdr2;
- debug("FSLDDR: ddr_cdr2 = 0x%08x\n", ddr->ddr_cdr2);
-}
-
-unsigned int
-check_fsl_memctl_config_regs(const fsl_ddr_cfg_regs_t *ddr)
-{
- unsigned int res = 0;
-
- /*
- * Check that DDR_SDRAM_CFG[RD_EN] and DDR_SDRAM_CFG[2T_EN] are
- * not set at the same time.
- */
- if (ddr->ddr_sdram_cfg & 0x10000000
- && ddr->ddr_sdram_cfg & 0x00008000) {
- printf("Error: DDR_SDRAM_CFG[RD_EN] and DDR_SDRAM_CFG[2T_EN] "
- " should not be set at the same time.\n");
- res++;
- }
-
- return res;
-}
-
-unsigned int
-compute_fsl_memctl_config_regs(const memctl_options_t *popts,
- fsl_ddr_cfg_regs_t *ddr,
- const common_timing_params_t *common_dimm,
- const dimm_params_t *dimm_params,
- unsigned int dbw_cap_adj,
- unsigned int size_only)
-{
- unsigned int i;
- unsigned int cas_latency;
- unsigned int additive_latency;
- unsigned int sr_it;
- unsigned int zq_en;
- unsigned int wrlvl_en;
- unsigned int ip_rev = 0;
- unsigned int unq_mrs_en = 0;
- int cs_en = 1;
-
- memset(ddr, 0, sizeof(fsl_ddr_cfg_regs_t));
-
- if (common_dimm == NULL) {
- printf("Error: subset DIMM params struct null pointer\n");
- return 1;
- }
-
- /*
- * Process overrides first.
- *
- * FIXME: somehow add dereated caslat to this
- */
- cas_latency = (popts->cas_latency_override)
- ? popts->cas_latency_override_value
- : common_dimm->lowest_common_SPD_caslat;
-
- additive_latency = (popts->additive_latency_override)
- ? popts->additive_latency_override_value
- : common_dimm->additive_latency;
-
- sr_it = (popts->auto_self_refresh_en)
- ? popts->sr_it
- : 0;
- /* ZQ calibration */
- zq_en = (popts->zq_en) ? 1 : 0;
- /* write leveling */
- wrlvl_en = (popts->wrlvl_en) ? 1 : 0;
-
- /* Chip Select Memory Bounds (CSn_BNDS) */
- for (i = 0; i < CONFIG_CHIP_SELECTS_PER_CTRL; i++) {
- unsigned long long ea, sa;
- unsigned int cs_per_dimm
- = CONFIG_CHIP_SELECTS_PER_CTRL / CONFIG_DIMM_SLOTS_PER_CTLR;
- unsigned int dimm_number
- = i / cs_per_dimm;
- unsigned long long rank_density
- = dimm_params[dimm_number].rank_density >> dbw_cap_adj;
-
- if (dimm_params[dimm_number].n_ranks == 0) {
- debug("Skipping setup of CS%u "
- "because n_ranks on DIMM %u is 0\n", i, dimm_number);
- continue;
- }
- if (popts->memctl_interleaving) {
- switch (popts->ba_intlv_ctl & FSL_DDR_CS0_CS1_CS2_CS3) {
- case FSL_DDR_CS0_CS1_CS2_CS3:
- break;
- case FSL_DDR_CS0_CS1:
- case FSL_DDR_CS0_CS1_AND_CS2_CS3:
- if (i > 1)
- cs_en = 0;
- break;
- case FSL_DDR_CS2_CS3:
- default:
- if (i > 0)
- cs_en = 0;
- break;
- }
- sa = common_dimm->base_address;
- ea = sa + common_dimm->total_mem - 1;
- } else if (!popts->memctl_interleaving) {
- /*
- * If memory interleaving between controllers is NOT
- * enabled, the starting address for each memory
- * controller is distinct. However, because rank
- * interleaving is enabled, the starting and ending
- * addresses of the total memory on that memory
- * controller needs to be programmed into its
- * respective CS0_BNDS.
- */
- switch (popts->ba_intlv_ctl & FSL_DDR_CS0_CS1_CS2_CS3) {
- case FSL_DDR_CS0_CS1_CS2_CS3:
- sa = common_dimm->base_address;
- ea = sa + common_dimm->total_mem - 1;
- break;
- case FSL_DDR_CS0_CS1_AND_CS2_CS3:
- if ((i >= 2) && (dimm_number == 0)) {
- sa = dimm_params[dimm_number].base_address +
- 2 * rank_density;
- ea = sa + 2 * rank_density - 1;
- } else {
- sa = dimm_params[dimm_number].base_address;
- ea = sa + 2 * rank_density - 1;
- }
- break;
- case FSL_DDR_CS0_CS1:
- if (dimm_params[dimm_number].n_ranks > (i % cs_per_dimm)) {
- sa = dimm_params[dimm_number].base_address;
- ea = sa + rank_density - 1;
- if (i != 1)
- sa += (i % cs_per_dimm) * rank_density;
- ea += (i % cs_per_dimm) * rank_density;
- } else {
- sa = 0;
- ea = 0;
- }
- if (i == 0)
- ea += rank_density;
- break;
- case FSL_DDR_CS2_CS3:
- if (dimm_params[dimm_number].n_ranks > (i % cs_per_dimm)) {
- sa = dimm_params[dimm_number].base_address;
- ea = sa + rank_density - 1;
- if (i != 3)
- sa += (i % cs_per_dimm) * rank_density;
- ea += (i % cs_per_dimm) * rank_density;
- } else {
- sa = 0;
- ea = 0;
- }
- if (i == 2)
- ea += (rank_density >> dbw_cap_adj);
- break;
- default: /* No bank(chip-select) interleaving */
- sa = dimm_params[dimm_number].base_address;
- ea = sa + rank_density - 1;
- if (dimm_params[dimm_number].n_ranks > (i % cs_per_dimm)) {
- sa += (i % cs_per_dimm) * rank_density;
- ea += (i % cs_per_dimm) * rank_density;
- } else {
- sa = 0;
- ea = 0;
- }
- break;
- }
- }
-
- sa >>= 24;
- ea >>= 24;
-
- if (cs_en) {
- ddr->cs[i].bnds = (0
- | ((sa & 0xFFF) << 16)/* starting address MSB */
- | ((ea & 0xFFF) << 0) /* ending address MSB */
- );
- } else {
- /* setting bnds to 0xffffffff for inactive CS */
- ddr->cs[i].bnds = 0xffffffff;
- }
-
- debug("FSLDDR: cs[%d]_bnds = 0x%08x\n", i, ddr->cs[i].bnds);
- set_csn_config(dimm_number, i, ddr, popts, dimm_params);
- set_csn_config_2(i, ddr);
- }
-
- /*
- * In the case we only need to compute the ddr sdram size, we only need
- * to set csn registers, so return from here.
- */
- if (size_only)
- return 0;
-
- set_ddr_eor(ddr, popts);
-
-#if !defined(CONFIG_FSL_DDR1)
- set_timing_cfg_0(ddr, popts, dimm_params);
-#endif
-
- set_timing_cfg_3(ddr, popts, common_dimm, cas_latency);
- set_timing_cfg_1(ddr, popts, common_dimm, cas_latency);
- set_timing_cfg_2(ddr, popts, common_dimm,
- cas_latency, additive_latency);
-
- set_ddr_cdr1(ddr, popts);
- set_ddr_cdr2(ddr, popts);
- set_ddr_sdram_cfg(ddr, popts, common_dimm);
- ip_rev = fsl_ddr_get_version();
- if (ip_rev > 0x40400)
- unq_mrs_en = 1;
-
- set_ddr_sdram_cfg_2(ddr, popts, unq_mrs_en);
- set_ddr_sdram_mode(ddr, popts, common_dimm,
- cas_latency, additive_latency, unq_mrs_en);
- set_ddr_sdram_mode_2(ddr, popts, common_dimm, unq_mrs_en);
- set_ddr_sdram_interval(ddr, popts, common_dimm);
- set_ddr_data_init(ddr);
- set_ddr_sdram_clk_cntl(ddr, popts);
- set_ddr_init_addr(ddr);
- set_ddr_init_ext_addr(ddr);
- set_timing_cfg_4(ddr, popts);
- set_timing_cfg_5(ddr, cas_latency);
-
- set_ddr_zq_cntl(ddr, zq_en);
- set_ddr_wrlvl_cntl(ddr, wrlvl_en, popts);
-
- set_ddr_sr_cntr(ddr, sr_it);
-
- set_ddr_sdram_rcw(ddr, popts, common_dimm);
-
-#ifdef CONFIG_SYS_FSL_DDR_EMU
- /* disble DDR training for emulator */
- ddr->debug[2] = 0x00000400;
- ddr->debug[4] = 0xff800000;
-#endif
- return check_fsl_memctl_config_regs(ddr);
-}
diff --git a/arch/powerpc/cpu/mpc8xxx/ddr/ddr.h b/arch/powerpc/cpu/mpc8xxx/ddr/ddr.h
deleted file mode 100644
index e3b414e666..0000000000
--- a/arch/powerpc/cpu/mpc8xxx/ddr/ddr.h
+++ /dev/null
@@ -1,105 +0,0 @@
-/*
- * Copyright 2008-2011 Freescale Semiconductor, Inc.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * Version 2 as published by the Free Software Foundation.
- */
-
-#ifndef FSL_DDR_MAIN_H
-#define FSL_DDR_MAIN_H
-
-#include <asm/fsl_ddr_sdram.h>
-#include <asm/fsl_ddr_dimm_params.h>
-
-#include "common_timing_params.h"
-
-#if defined(CONFIG_DDR_SPD) || defined(CONFIG_SPD_EEPROM)
-/*
- * Bind the main DDR setup driver's generic names
- * to this specific DDR technology.
- */
-static __inline__ int
-compute_dimm_parameters(const generic_spd_eeprom_t *spd,
- dimm_params_t *pdimm,
- unsigned int dimm_number)
-{
- return ddr_compute_dimm_parameters(spd, pdimm, dimm_number);
-}
-#endif
-
-/*
- * Data Structures
- *
- * All data structures have to be on the stack
- */
-#define CONFIG_SYS_NUM_DDR_CTLRS CONFIG_NUM_DDR_CONTROLLERS
-#define CONFIG_SYS_DIMM_SLOTS_PER_CTLR CONFIG_DIMM_SLOTS_PER_CTLR
-
-typedef struct {
- generic_spd_eeprom_t
- spd_installed_dimms[CONFIG_SYS_NUM_DDR_CTLRS][CONFIG_SYS_DIMM_SLOTS_PER_CTLR];
- struct dimm_params_s
- dimm_params[CONFIG_SYS_NUM_DDR_CTLRS][CONFIG_SYS_DIMM_SLOTS_PER_CTLR];
- memctl_options_t memctl_opts[CONFIG_SYS_NUM_DDR_CTLRS];
- common_timing_params_t common_timing_params[CONFIG_SYS_NUM_DDR_CTLRS];
- fsl_ddr_cfg_regs_t fsl_ddr_config_reg[CONFIG_SYS_NUM_DDR_CTLRS];
-} fsl_ddr_info_t;
-
-/* Compute steps */
-#define STEP_GET_SPD (1 << 0)
-#define STEP_COMPUTE_DIMM_PARMS (1 << 1)
-#define STEP_COMPUTE_COMMON_PARMS (1 << 2)
-#define STEP_GATHER_OPTS (1 << 3)
-#define STEP_ASSIGN_ADDRESSES (1 << 4)
-#define STEP_COMPUTE_REGS (1 << 5)
-#define STEP_PROGRAM_REGS (1 << 6)
-#define STEP_ALL 0xFFF
-
-unsigned long long
-fsl_ddr_compute(fsl_ddr_info_t *pinfo, unsigned int start_step,
- unsigned int size_only);
-
-const char *step_to_string(unsigned int step);
-
-unsigned int compute_fsl_memctl_config_regs(const memctl_options_t *popts,
- fsl_ddr_cfg_regs_t *ddr,
- const common_timing_params_t *common_dimm,
- const dimm_params_t *dimm_parameters,
- unsigned int dbw_capacity_adjust,
- unsigned int size_only);
-unsigned int compute_lowest_common_dimm_parameters(
- const dimm_params_t *dimm_params,
- common_timing_params_t *outpdimm,
- unsigned int number_of_dimms);
-unsigned int populate_memctl_options(int all_dimms_registered,
- memctl_options_t *popts,
- dimm_params_t *pdimm,
- unsigned int ctrl_num);
-void check_interleaving_options(fsl_ddr_info_t *pinfo);
-
-unsigned int mclk_to_picos(unsigned int mclk);
-unsigned int get_memory_clk_period_ps(void);
-unsigned int picos_to_mclk(unsigned int picos);
-void fsl_ddr_set_lawbar(
- const common_timing_params_t *memctl_common_params,
- unsigned int memctl_interleaved,
- unsigned int ctrl_num);
-
-int fsl_ddr_interactive_env_var_exists(void);
-unsigned long long fsl_ddr_interactive(fsl_ddr_info_t *pinfo, int var_is_set);
-void fsl_ddr_get_spd(generic_spd_eeprom_t *ctrl_dimms_spd,
- unsigned int ctrl_num);
-
-int do_reset(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]);
-unsigned int check_fsl_memctl_config_regs(const fsl_ddr_cfg_regs_t *ddr);
-
-/* processor specific function */
-void fsl_ddr_set_memctl_regs(const fsl_ddr_cfg_regs_t *regs,
- unsigned int ctrl_num, int step);
-
-/* board specific function */
-int fsl_ddr_get_dimm_params(dimm_params_t *pdimm,
- unsigned int controller_number,
- unsigned int dimm_number);
-#endif
diff --git a/arch/powerpc/cpu/mpc8xxx/ddr/ddr1_dimm_params.c b/arch/powerpc/cpu/mpc8xxx/ddr/ddr1_dimm_params.c
deleted file mode 100644
index f137fcee34..0000000000
--- a/arch/powerpc/cpu/mpc8xxx/ddr/ddr1_dimm_params.c
+++ /dev/null
@@ -1,343 +0,0 @@
-/*
- * Copyright 2008 Freescale Semiconductor, Inc.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * Version 2 as published by the Free Software Foundation.
- */
-
-#include <common.h>
-#include <asm/fsl_ddr_sdram.h>
-
-#include "ddr.h"
-
-/*
- * Calculate the Density of each Physical Rank.
- * Returned size is in bytes.
- *
- * Study these table from Byte 31 of JEDEC SPD Spec.
- *
- * DDR I DDR II
- * Bit Size Size
- * --- ----- ------
- * 7 high 512MB 512MB
- * 6 256MB 256MB
- * 5 128MB 128MB
- * 4 64MB 16GB
- * 3 32MB 8GB
- * 2 16MB 4GB
- * 1 2GB 2GB
- * 0 low 1GB 1GB
- *
- * Reorder Table to be linear by stripping the bottom
- * 2 or 5 bits off and shifting them up to the top.
- */
-
-static unsigned long long
-compute_ranksize(unsigned int mem_type, unsigned char row_dens)
-{
- unsigned long long bsize;
-
- /* Bottom 2 bits up to the top. */
- bsize = ((row_dens >> 2) | ((row_dens & 3) << 6));
- bsize <<= 24ULL;
- debug("DDR: DDR I rank density = 0x%16llx\n", bsize);
-
- return bsize;
-}
-
-/*
- * Convert a two-nibble BCD value into a cycle time.
- * While the spec calls for nano-seconds, picos are returned.
- *
- * This implements the tables for bytes 9, 23 and 25 for both
- * DDR I and II. No allowance for distinguishing the invalid
- * fields absent for DDR I yet present in DDR II is made.
- * (That is, cycle times of .25, .33, .66 and .75 ns are
- * allowed for both DDR II and I.)
- */
-static unsigned int
-convert_bcd_tenths_to_cycle_time_ps(unsigned int spd_val)
-{
- /* Table look up the lower nibble, allow DDR I & II. */
- unsigned int tenths_ps[16] = {
- 0,
- 100,
- 200,
- 300,
- 400,
- 500,
- 600,
- 700,
- 800,
- 900,
- 250, /* This and the next 3 entries valid ... */
- 330, /* ... only for tCK calculations. */
- 660,
- 750,
- 0, /* undefined */
- 0 /* undefined */
- };
-
- unsigned int whole_ns = (spd_val & 0xF0) >> 4;
- unsigned int tenth_ns = spd_val & 0x0F;
- unsigned int ps = whole_ns * 1000 + tenths_ps[tenth_ns];
-
- return ps;
-}
-
-static unsigned int
-convert_bcd_hundredths_to_cycle_time_ps(unsigned int spd_val)
-{
- unsigned int tenth_ns = (spd_val & 0xF0) >> 4;
- unsigned int hundredth_ns = spd_val & 0x0F;
- unsigned int ps = tenth_ns * 100 + hundredth_ns * 10;
-
- return ps;
-}
-
-static unsigned int byte40_table_ps[8] = {
- 0,
- 250,
- 330,
- 500,
- 660,
- 750,
- 0, /* supposed to be RFC, but not sure what that means */
- 0 /* Undefined */
-};
-
-static unsigned int
-compute_trfc_ps_from_spd(unsigned char trctrfc_ext, unsigned char trfc)
-{
- unsigned int trfc_ps;
-
- trfc_ps = (((trctrfc_ext & 0x1) * 256) + trfc) * 1000
- + byte40_table_ps[(trctrfc_ext >> 1) & 0x7];
-
- return trfc_ps;
-}
-
-static unsigned int
-compute_trc_ps_from_spd(unsigned char trctrfc_ext, unsigned char trc)
-{
- unsigned int trc_ps;
-
- trc_ps = trc * 1000 + byte40_table_ps[(trctrfc_ext >> 4) & 0x7];
-
- return trc_ps;
-}
-
-/*
- * tCKmax from DDR I SPD Byte 43
- *
- * Bits 7:2 == whole ns
- * Bits 1:0 == quarter ns
- * 00 == 0.00 ns
- * 01 == 0.25 ns
- * 10 == 0.50 ns
- * 11 == 0.75 ns
- *
- * Returns picoseconds.
- */
-static unsigned int
-compute_tckmax_from_spd_ps(unsigned int byte43)
-{
- return (byte43 >> 2) * 1000 + (byte43 & 0x3) * 250;
-}
-
-/*
- * Determine Refresh Rate. Ignore self refresh bit on DDR I.
- * Table from SPD Spec, Byte 12, converted to picoseconds and
- * filled in with "default" normal values.
- */
-static unsigned int
-determine_refresh_rate_ps(const unsigned int spd_refresh)
-{
- unsigned int refresh_time_ps[8] = {
- 15625000, /* 0 Normal 1.00x */
- 3900000, /* 1 Reduced .25x */
- 7800000, /* 2 Extended .50x */
- 31300000, /* 3 Extended 2.00x */
- 62500000, /* 4 Extended 4.00x */
- 125000000, /* 5 Extended 8.00x */
- 15625000, /* 6 Normal 1.00x filler */
- 15625000, /* 7 Normal 1.00x filler */
- };
-
- return refresh_time_ps[spd_refresh & 0x7];
-}
-
-/*
- * The purpose of this function is to compute a suitable
- * CAS latency given the DRAM clock period. The SPD only
- * defines at most 3 CAS latencies. Typically the slower in
- * frequency the DIMM runs at, the shorter its CAS latency can be.
- * If the DIMM is operating at a sufficiently low frequency,
- * it may be able to run at a CAS latency shorter than the
- * shortest SPD-defined CAS latency.
- *
- * If a CAS latency is not found, 0 is returned.
- *
- * Do this by finding in the standard speed bin table the longest
- * tCKmin that doesn't exceed the value of mclk_ps (tCK).
- *
- * An assumption made is that the SDRAM device allows the
- * CL to be programmed for a value that is lower than those
- * advertised by the SPD. This is not always the case,
- * as those modes not defined in the SPD are optional.
- *
- * CAS latency de-rating based upon values JEDEC Standard No. 79-E
- * Table 11.
- *
- * ordinal 2, ddr1_speed_bins[1] contains tCK for CL=2
- */
- /* CL2.0 CL2.5 CL3.0 */
-unsigned short ddr1_speed_bins[] = {0, 7500, 6000, 5000 };
-
-unsigned int
-compute_derated_DDR1_CAS_latency(unsigned int mclk_ps)
-{
- const unsigned int num_speed_bins = ARRAY_SIZE(ddr1_speed_bins);
- unsigned int lowest_tCKmin_found = 0;
- unsigned int lowest_tCKmin_CL = 0;
- unsigned int i;
-
- debug("mclk_ps = %u\n", mclk_ps);
-
- for (i = 0; i < num_speed_bins; i++) {
- unsigned int x = ddr1_speed_bins[i];
- debug("i=%u, x = %u, lowest_tCKmin_found = %u\n",
- i, x, lowest_tCKmin_found);
- if (x && lowest_tCKmin_found <= x && x <= mclk_ps) {
- lowest_tCKmin_found = x;
- lowest_tCKmin_CL = i + 1;
- }
- }
-
- debug("lowest_tCKmin_CL = %u\n", lowest_tCKmin_CL);
-
- return lowest_tCKmin_CL;
-}
-
-/*
- * ddr_compute_dimm_parameters for DDR1 SPD
- *
- * Compute DIMM parameters based upon the SPD information in spd.
- * Writes the results to the dimm_params_t structure pointed by pdimm.
- *
- * FIXME: use #define for the retvals
- */
-unsigned int
-ddr_compute_dimm_parameters(const ddr1_spd_eeprom_t *spd,
- dimm_params_t *pdimm,
- unsigned int dimm_number)
-{
- unsigned int retval;
-
- if (spd->mem_type) {
- if (spd->mem_type != SPD_MEMTYPE_DDR) {
- printf("DIMM %u: is not a DDR1 SPD.\n", dimm_number);
- return 1;
- }
- } else {
- memset(pdimm, 0, sizeof(dimm_params_t));
- return 1;
- }
-
- retval = ddr1_spd_check(spd);
- if (retval) {
- printf("DIMM %u: failed checksum\n", dimm_number);
- return 2;
- }
-
- /*
- * The part name in ASCII in the SPD EEPROM is not null terminated.
- * Guarantee null termination here by presetting all bytes to 0
- * and copying the part name in ASCII from the SPD onto it
- */
- memset(pdimm->mpart, 0, sizeof(pdimm->mpart));
- memcpy(pdimm->mpart, spd->mpart, sizeof(pdimm->mpart) - 1);
-
- /* DIMM organization parameters */
- pdimm->n_ranks = spd->nrows;
- pdimm->rank_density = compute_ranksize(spd->mem_type, spd->bank_dens);
- pdimm->capacity = pdimm->n_ranks * pdimm->rank_density;
- pdimm->data_width = spd->dataw_lsb;
- pdimm->primary_sdram_width = spd->primw;
- pdimm->ec_sdram_width = spd->ecw;
-
- /*
- * FIXME: Need to determine registered_dimm status.
- * 1 == register buffered
- * 0 == unbuffered
- */
- pdimm->registered_dimm = 0; /* unbuffered */
-
- /* SDRAM device parameters */
- pdimm->n_row_addr = spd->nrow_addr;
- pdimm->n_col_addr = spd->ncol_addr;
- pdimm->n_banks_per_sdram_device = spd->nbanks;
- pdimm->edc_config = spd->config;
- pdimm->burst_lengths_bitmask = spd->burstl;
- pdimm->row_density = spd->bank_dens;
-
- /*
- * Calculate the Maximum Data Rate based on the Minimum Cycle time.
- * The SPD clk_cycle field (tCKmin) is measured in tenths of
- * nanoseconds and represented as BCD.
- */
- pdimm->tckmin_x_ps
- = convert_bcd_tenths_to_cycle_time_ps(spd->clk_cycle);
- pdimm->tckmin_x_minus_1_ps
- = convert_bcd_tenths_to_cycle_time_ps(spd->clk_cycle2);
- pdimm->tckmin_x_minus_2_ps
- = convert_bcd_tenths_to_cycle_time_ps(spd->clk_cycle3);
-
- pdimm->tckmax_ps = compute_tckmax_from_spd_ps(spd->tckmax);
-
- /*
- * Compute CAS latencies defined by SPD
- * The SPD caslat_x should have at least 1 and at most 3 bits set.
- *
- * If cas_lat after masking is 0, the __ilog2 function returns
- * 255 into the variable. This behavior is abused once.
- */
- pdimm->caslat_x = __ilog2(spd->cas_lat);
- pdimm->caslat_x_minus_1 = __ilog2(spd->cas_lat
- & ~(1 << pdimm->caslat_x));
- pdimm->caslat_x_minus_2 = __ilog2(spd->cas_lat
- & ~(1 << pdimm->caslat_x)
- & ~(1 << pdimm->caslat_x_minus_1));
-
- /* Compute CAS latencies below that defined by SPD */
- pdimm->caslat_lowest_derated
- = compute_derated_DDR1_CAS_latency(get_memory_clk_period_ps());
-
- /* Compute timing parameters */
- pdimm->trcd_ps = spd->trcd * 250;
- pdimm->trp_ps = spd->trp * 250;
- pdimm->tras_ps = spd->tras * 1000;
-
- pdimm->twr_ps = mclk_to_picos(3);
- pdimm->twtr_ps = mclk_to_picos(1);
- pdimm->trfc_ps = compute_trfc_ps_from_spd(0, spd->trfc);
-
- pdimm->trrd_ps = spd->trrd * 250;
- pdimm->trc_ps = compute_trc_ps_from_spd(0, spd->trc);
-
- pdimm->refresh_rate_ps = determine_refresh_rate_ps(spd->refresh);
-
- pdimm->tis_ps = convert_bcd_hundredths_to_cycle_time_ps(spd->ca_setup);
- pdimm->tih_ps = convert_bcd_hundredths_to_cycle_time_ps(spd->ca_hold);
- pdimm->tds_ps
- = convert_bcd_hundredths_to_cycle_time_ps(spd->data_setup);
- pdimm->tdh_ps
- = convert_bcd_hundredths_to_cycle_time_ps(spd->data_hold);
-
- pdimm->trtp_ps = mclk_to_picos(2); /* By the book. */
- pdimm->tdqsq_max_ps = spd->tdqsq * 10;
- pdimm->tqhs_ps = spd->tqhs * 10;
-
- return 0;
-}
diff --git a/arch/powerpc/cpu/mpc8xxx/ddr/ddr2_dimm_params.c b/arch/powerpc/cpu/mpc8xxx/ddr/ddr2_dimm_params.c
deleted file mode 100644
index e4d02e8f61..0000000000
--- a/arch/powerpc/cpu/mpc8xxx/ddr/ddr2_dimm_params.c
+++ /dev/null
@@ -1,342 +0,0 @@
-/*
- * Copyright 2008 Freescale Semiconductor, Inc.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * Version 2 as published by the Free Software Foundation.
- */
-
-#include <common.h>
-#include <asm/fsl_ddr_sdram.h>
-
-#include "ddr.h"
-/*
- * Calculate the Density of each Physical Rank.
- * Returned size is in bytes.
- *
- * Study these table from Byte 31 of JEDEC SPD Spec.
- *
- * DDR I DDR II
- * Bit Size Size
- * --- ----- ------
- * 7 high 512MB 512MB
- * 6 256MB 256MB
- * 5 128MB 128MB
- * 4 64MB 16GB
- * 3 32MB 8GB
- * 2 16MB 4GB
- * 1 2GB 2GB
- * 0 low 1GB 1GB
- *
- * Reorder Table to be linear by stripping the bottom
- * 2 or 5 bits off and shifting them up to the top.
- *
- */
-static unsigned long long
-compute_ranksize(unsigned int mem_type, unsigned char row_dens)
-{
- unsigned long long bsize;
-
- /* Bottom 5 bits up to the top. */
- bsize = ((row_dens >> 5) | ((row_dens & 31) << 3));
- bsize <<= 27ULL;
- debug("DDR: DDR II rank density = 0x%16llx\n", bsize);
-
- return bsize;
-}
-
-/*
- * Convert a two-nibble BCD value into a cycle time.
- * While the spec calls for nano-seconds, picos are returned.
- *
- * This implements the tables for bytes 9, 23 and 25 for both
- * DDR I and II. No allowance for distinguishing the invalid
- * fields absent for DDR I yet present in DDR II is made.
- * (That is, cycle times of .25, .33, .66 and .75 ns are
- * allowed for both DDR II and I.)
- */
-static unsigned int
-convert_bcd_tenths_to_cycle_time_ps(unsigned int spd_val)
-{
- /* Table look up the lower nibble, allow DDR I & II. */
- unsigned int tenths_ps[16] = {
- 0,
- 100,
- 200,
- 300,
- 400,
- 500,
- 600,
- 700,
- 800,
- 900,
- 250, /* This and the next 3 entries valid ... */
- 330, /* ... only for tCK calculations. */
- 660,
- 750,
- 0, /* undefined */
- 0 /* undefined */
- };
-
- unsigned int whole_ns = (spd_val & 0xF0) >> 4;
- unsigned int tenth_ns = spd_val & 0x0F;
- unsigned int ps = whole_ns * 1000 + tenths_ps[tenth_ns];
-
- return ps;
-}
-
-static unsigned int
-convert_bcd_hundredths_to_cycle_time_ps(unsigned int spd_val)
-{
- unsigned int tenth_ns = (spd_val & 0xF0) >> 4;
- unsigned int hundredth_ns = spd_val & 0x0F;
- unsigned int ps = tenth_ns * 100 + hundredth_ns * 10;
-
- return ps;
-}
-
-static unsigned int byte40_table_ps[8] = {
- 0,
- 250,
- 330,
- 500,
- 660,
- 750,
- 0, /* supposed to be RFC, but not sure what that means */
- 0 /* Undefined */
-};
-
-static unsigned int
-compute_trfc_ps_from_spd(unsigned char trctrfc_ext, unsigned char trfc)
-{
- unsigned int trfc_ps;
-
- trfc_ps = (((trctrfc_ext & 0x1) * 256) + trfc) * 1000
- + byte40_table_ps[(trctrfc_ext >> 1) & 0x7];
-
- return trfc_ps;
-}
-
-static unsigned int
-compute_trc_ps_from_spd(unsigned char trctrfc_ext, unsigned char trc)
-{
- unsigned int trc_ps;
-
- trc_ps = trc * 1000 + byte40_table_ps[(trctrfc_ext >> 4) & 0x7];
-
- return trc_ps;
-}
-
-/*
- * Determine Refresh Rate. Ignore self refresh bit on DDR I.
- * Table from SPD Spec, Byte 12, converted to picoseconds and
- * filled in with "default" normal values.
- */
-static unsigned int
-determine_refresh_rate_ps(const unsigned int spd_refresh)
-{
- unsigned int refresh_time_ps[8] = {
- 15625000, /* 0 Normal 1.00x */
- 3900000, /* 1 Reduced .25x */
- 7800000, /* 2 Extended .50x */
- 31300000, /* 3 Extended 2.00x */
- 62500000, /* 4 Extended 4.00x */
- 125000000, /* 5 Extended 8.00x */
- 15625000, /* 6 Normal 1.00x filler */
- 15625000, /* 7 Normal 1.00x filler */
- };
-
- return refresh_time_ps[spd_refresh & 0x7];
-}
-
-/*
- * The purpose of this function is to compute a suitable
- * CAS latency given the DRAM clock period. The SPD only
- * defines at most 3 CAS latencies. Typically the slower in
- * frequency the DIMM runs at, the shorter its CAS latency can.
- * be. If the DIMM is operating at a sufficiently low frequency,
- * it may be able to run at a CAS latency shorter than the
- * shortest SPD-defined CAS latency.
- *
- * If a CAS latency is not found, 0 is returned.
- *
- * Do this by finding in the standard speed bin table the longest
- * tCKmin that doesn't exceed the value of mclk_ps (tCK).
- *
- * An assumption made is that the SDRAM device allows the
- * CL to be programmed for a value that is lower than those
- * advertised by the SPD. This is not always the case,
- * as those modes not defined in the SPD are optional.
- *
- * CAS latency de-rating based upon values JEDEC Standard No. 79-2C
- * Table 40, "DDR2 SDRAM stanadard speed bins and tCK, tRCD, tRP, tRAS,
- * and tRC for corresponding bin"
- *
- * ordinal 2, ddr2_speed_bins[1] contains tCK for CL=3
- * Not certain if any good value exists for CL=2
- */
- /* CL2 CL3 CL4 CL5 CL6 CL7*/
-unsigned short ddr2_speed_bins[] = { 0, 5000, 3750, 3000, 2500, 1875 };
-
-unsigned int
-compute_derated_DDR2_CAS_latency(unsigned int mclk_ps)
-{
- const unsigned int num_speed_bins = ARRAY_SIZE(ddr2_speed_bins);
- unsigned int lowest_tCKmin_found = 0;
- unsigned int lowest_tCKmin_CL = 0;
- unsigned int i;
-
- debug("mclk_ps = %u\n", mclk_ps);
-
- for (i = 0; i < num_speed_bins; i++) {
- unsigned int x = ddr2_speed_bins[i];
- debug("i=%u, x = %u, lowest_tCKmin_found = %u\n",
- i, x, lowest_tCKmin_found);
- if (x && x <= mclk_ps && x >= lowest_tCKmin_found ) {
- lowest_tCKmin_found = x;
- lowest_tCKmin_CL = i + 2;
- }
- }
-
- debug("lowest_tCKmin_CL = %u\n", lowest_tCKmin_CL);
-
- return lowest_tCKmin_CL;
-}
-
-/*
- * ddr_compute_dimm_parameters for DDR2 SPD
- *
- * Compute DIMM parameters based upon the SPD information in spd.
- * Writes the results to the dimm_params_t structure pointed by pdimm.
- *
- * FIXME: use #define for the retvals
- */
-unsigned int
-ddr_compute_dimm_parameters(const ddr2_spd_eeprom_t *spd,
- dimm_params_t *pdimm,
- unsigned int dimm_number)
-{
- unsigned int retval;
-
- if (spd->mem_type) {
- if (spd->mem_type != SPD_MEMTYPE_DDR2) {
- printf("DIMM %u: is not a DDR2 SPD.\n", dimm_number);
- return 1;
- }
- } else {
- memset(pdimm, 0, sizeof(dimm_params_t));
- return 1;
- }
-
- retval = ddr2_spd_check(spd);
- if (retval) {
- printf("DIMM %u: failed checksum\n", dimm_number);
- return 2;
- }
-
- /*
- * The part name in ASCII in the SPD EEPROM is not null terminated.
- * Guarantee null termination here by presetting all bytes to 0
- * and copying the part name in ASCII from the SPD onto it
- */
- memset(pdimm->mpart, 0, sizeof(pdimm->mpart));
- memcpy(pdimm->mpart, spd->mpart, sizeof(pdimm->mpart) - 1);
-
- /* DIMM organization parameters */
- pdimm->n_ranks = (spd->mod_ranks & 0x7) + 1;
- pdimm->rank_density = compute_ranksize(spd->mem_type, spd->rank_dens);
- pdimm->capacity = pdimm->n_ranks * pdimm->rank_density;
- pdimm->data_width = spd->dataw;
- pdimm->primary_sdram_width = spd->primw;
- pdimm->ec_sdram_width = spd->ecw;
-
- /* These are all the types defined by the JEDEC DDR2 SPD 1.3 spec */
- switch (spd->dimm_type) {
- case DDR2_SPD_DIMMTYPE_RDIMM:
- case DDR2_SPD_DIMMTYPE_72B_SO_RDIMM:
- case DDR2_SPD_DIMMTYPE_MINI_RDIMM:
- /* Registered/buffered DIMMs */
- pdimm->registered_dimm = 1;
- break;
-
- case DDR2_SPD_DIMMTYPE_UDIMM:
- case DDR2_SPD_DIMMTYPE_SO_DIMM:
- case DDR2_SPD_DIMMTYPE_MICRO_DIMM:
- case DDR2_SPD_DIMMTYPE_MINI_UDIMM:
- /* Unbuffered DIMMs */
- pdimm->registered_dimm = 0;
- break;
-
- case DDR2_SPD_DIMMTYPE_72B_SO_CDIMM:
- default:
- printf("unknown dimm_type 0x%02X\n", spd->dimm_type);
- return 1;
- }
-
- /* SDRAM device parameters */
- pdimm->n_row_addr = spd->nrow_addr;
- pdimm->n_col_addr = spd->ncol_addr;
- pdimm->n_banks_per_sdram_device = spd->nbanks;
- pdimm->edc_config = spd->config;
- pdimm->burst_lengths_bitmask = spd->burstl;
- pdimm->row_density = spd->rank_dens;
-
- /*
- * Calculate the Maximum Data Rate based on the Minimum Cycle time.
- * The SPD clk_cycle field (tCKmin) is measured in tenths of
- * nanoseconds and represented as BCD.
- */
- pdimm->tckmin_x_ps
- = convert_bcd_tenths_to_cycle_time_ps(spd->clk_cycle);
- pdimm->tckmin_x_minus_1_ps
- = convert_bcd_tenths_to_cycle_time_ps(spd->clk_cycle2);
- pdimm->tckmin_x_minus_2_ps
- = convert_bcd_tenths_to_cycle_time_ps(spd->clk_cycle3);
-
- pdimm->tckmax_ps = convert_bcd_tenths_to_cycle_time_ps(spd->tckmax);
-
- /*
- * Compute CAS latencies defined by SPD
- * The SPD caslat_x should have at least 1 and at most 3 bits set.
- *
- * If cas_lat after masking is 0, the __ilog2 function returns
- * 255 into the variable. This behavior is abused once.
- */
- pdimm->caslat_x = __ilog2(spd->cas_lat);
- pdimm->caslat_x_minus_1 = __ilog2(spd->cas_lat
- & ~(1 << pdimm->caslat_x));
- pdimm->caslat_x_minus_2 = __ilog2(spd->cas_lat
- & ~(1 << pdimm->caslat_x)
- & ~(1 << pdimm->caslat_x_minus_1));
-
- /* Compute CAS latencies below that defined by SPD */
- pdimm->caslat_lowest_derated
- = compute_derated_DDR2_CAS_latency(get_memory_clk_period_ps());
-
- /* Compute timing parameters */
- pdimm->trcd_ps = spd->trcd * 250;
- pdimm->trp_ps = spd->trp * 250;
- pdimm->tras_ps = spd->tras * 1000;
-
- pdimm->twr_ps = spd->twr * 250;
- pdimm->twtr_ps = spd->twtr * 250;
- pdimm->trfc_ps = compute_trfc_ps_from_spd(spd->trctrfc_ext, spd->trfc);
-
- pdimm->trrd_ps = spd->trrd * 250;
- pdimm->trc_ps = compute_trc_ps_from_spd(spd->trctrfc_ext, spd->trc);
-
- pdimm->refresh_rate_ps = determine_refresh_rate_ps(spd->refresh);
-
- pdimm->tis_ps = convert_bcd_hundredths_to_cycle_time_ps(spd->ca_setup);
- pdimm->tih_ps = convert_bcd_hundredths_to_cycle_time_ps(spd->ca_hold);
- pdimm->tds_ps
- = convert_bcd_hundredths_to_cycle_time_ps(spd->data_setup);
- pdimm->tdh_ps
- = convert_bcd_hundredths_to_cycle_time_ps(spd->data_hold);
-
- pdimm->trtp_ps = spd->trtp * 250;
- pdimm->tdqsq_max_ps = spd->tdqsq * 10;
- pdimm->tqhs_ps = spd->tqhs * 10;
-
- return 0;
-}
diff --git a/arch/powerpc/cpu/mpc8xxx/ddr/ddr3_dimm_params.c b/arch/powerpc/cpu/mpc8xxx/ddr/ddr3_dimm_params.c
deleted file mode 100644
index 4c8645da56..0000000000
--- a/arch/powerpc/cpu/mpc8xxx/ddr/ddr3_dimm_params.c
+++ /dev/null
@@ -1,341 +0,0 @@
-/*
- * Copyright 2008-2012 Freescale Semiconductor, Inc.
- * Dave Liu <daveliu@freescale.com>
- *
- * calculate the organization and timing parameter
- * from ddr3 spd, please refer to the spec
- * JEDEC standard No.21-C 4_01_02_11R18.pdf
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * Version 2 as published by the Free Software Foundation.
- */
-
-#include <common.h>
-#include <asm/fsl_ddr_sdram.h>
-
-#include "ddr.h"
-
-/*
- * Calculate the Density of each Physical Rank.
- * Returned size is in bytes.
- *
- * each rank size =
- * sdram capacity(bit) / 8 * primary bus width / sdram width
- *
- * where: sdram capacity = spd byte4[3:0]
- * primary bus width = spd byte8[2:0]
- * sdram width = spd byte7[2:0]
- *
- * SPD byte4 - sdram density and banks
- * bit[3:0] size(bit) size(byte)
- * 0000 256Mb 32MB
- * 0001 512Mb 64MB
- * 0010 1Gb 128MB
- * 0011 2Gb 256MB
- * 0100 4Gb 512MB
- * 0101 8Gb 1GB
- * 0110 16Gb 2GB
- *
- * SPD byte8 - module memory bus width
- * bit[2:0] primary bus width
- * 000 8bits
- * 001 16bits
- * 010 32bits
- * 011 64bits
- *
- * SPD byte7 - module organiztion
- * bit[2:0] sdram device width
- * 000 4bits
- * 001 8bits
- * 010 16bits
- * 011 32bits
- *
- */
-static unsigned long long
-compute_ranksize(const ddr3_spd_eeprom_t *spd)
-{
- unsigned long long bsize;
-
- int nbit_sdram_cap_bsize = 0;
- int nbit_primary_bus_width = 0;
- int nbit_sdram_width = 0;
-
- if ((spd->density_banks & 0xf) < 7)
- nbit_sdram_cap_bsize = (spd->density_banks & 0xf) + 28;
- if ((spd->bus_width & 0x7) < 4)
- nbit_primary_bus_width = (spd->bus_width & 0x7) + 3;
- if ((spd->organization & 0x7) < 4)
- nbit_sdram_width = (spd->organization & 0x7) + 2;
-
- bsize = 1ULL << (nbit_sdram_cap_bsize - 3
- + nbit_primary_bus_width - nbit_sdram_width);
-
- debug("DDR: DDR III rank density = 0x%16llx\n", bsize);
-
- return bsize;
-}
-
-/*
- * ddr_compute_dimm_parameters for DDR3 SPD
- *
- * Compute DIMM parameters based upon the SPD information in spd.
- * Writes the results to the dimm_params_t structure pointed by pdimm.
- *
- */
-unsigned int
-ddr_compute_dimm_parameters(const ddr3_spd_eeprom_t *spd,
- dimm_params_t *pdimm,
- unsigned int dimm_number)
-{
- unsigned int retval;
- unsigned int mtb_ps;
- int ftb_10th_ps;
- int i;
-
- if (spd->mem_type) {
- if (spd->mem_type != SPD_MEMTYPE_DDR3) {
- printf("DIMM %u: is not a DDR3 SPD.\n", dimm_number);
- return 1;
- }
- } else {
- memset(pdimm, 0, sizeof(dimm_params_t));
- return 1;
- }
-
- retval = ddr3_spd_check(spd);
- if (retval) {
- printf("DIMM %u: failed checksum\n", dimm_number);
- return 2;
- }
-
- /*
- * The part name in ASCII in the SPD EEPROM is not null terminated.
- * Guarantee null termination here by presetting all bytes to 0
- * and copying the part name in ASCII from the SPD onto it
- */
- memset(pdimm->mpart, 0, sizeof(pdimm->mpart));
- if ((spd->info_size_crc & 0xF) > 1)
- memcpy(pdimm->mpart, spd->mpart, sizeof(pdimm->mpart) - 1);
-
- /* DIMM organization parameters */
- pdimm->n_ranks = ((spd->organization >> 3) & 0x7) + 1;
- pdimm->rank_density = compute_ranksize(spd);
- pdimm->capacity = pdimm->n_ranks * pdimm->rank_density;
- pdimm->primary_sdram_width = 1 << (3 + (spd->bus_width & 0x7));
- if ((spd->bus_width >> 3) & 0x3)
- pdimm->ec_sdram_width = 8;
- else
- pdimm->ec_sdram_width = 0;
- pdimm->data_width = pdimm->primary_sdram_width
- + pdimm->ec_sdram_width;
- pdimm->device_width = 1 << ((spd->organization & 0x7) + 2);
-
- /* These are the types defined by the JEDEC DDR3 SPD spec */
- pdimm->mirrored_dimm = 0;
- pdimm->registered_dimm = 0;
- switch (spd->module_type & DDR3_SPD_MODULETYPE_MASK) {
- case DDR3_SPD_MODULETYPE_RDIMM:
- case DDR3_SPD_MODULETYPE_MINI_RDIMM:
- case DDR3_SPD_MODULETYPE_72B_SO_RDIMM:
- /* Registered/buffered DIMMs */
- pdimm->registered_dimm = 1;
- for (i = 0; i < 16; i += 2) {
- u8 rcw = spd->mod_section.registered.rcw[i/2];
- pdimm->rcw[i] = (rcw >> 0) & 0x0F;
- pdimm->rcw[i+1] = (rcw >> 4) & 0x0F;
- }
- break;
-
- case DDR3_SPD_MODULETYPE_UDIMM:
- case DDR3_SPD_MODULETYPE_SO_DIMM:
- case DDR3_SPD_MODULETYPE_MICRO_DIMM:
- case DDR3_SPD_MODULETYPE_MINI_UDIMM:
- case DDR3_SPD_MODULETYPE_MINI_CDIMM:
- case DDR3_SPD_MODULETYPE_72B_SO_UDIMM:
- case DDR3_SPD_MODULETYPE_72B_SO_CDIMM:
- case DDR3_SPD_MODULETYPE_LRDIMM:
- case DDR3_SPD_MODULETYPE_16B_SO_DIMM:
- case DDR3_SPD_MODULETYPE_32B_SO_DIMM:
- /* Unbuffered DIMMs */
- if (spd->mod_section.unbuffered.addr_mapping & 0x1)
- pdimm->mirrored_dimm = 1;
- break;
-
- default:
- printf("unknown module_type 0x%02X\n", spd->module_type);
- return 1;
- }
-
- /* SDRAM device parameters */
- pdimm->n_row_addr = ((spd->addressing >> 3) & 0x7) + 12;
- pdimm->n_col_addr = (spd->addressing & 0x7) + 9;
- pdimm->n_banks_per_sdram_device = 8 << ((spd->density_banks >> 4) & 0x7);
-
- /*
- * The SPD spec has not the ECC bit,
- * We consider the DIMM as ECC capability
- * when the extension bus exist
- */
- if (pdimm->ec_sdram_width)
- pdimm->edc_config = 0x02;
- else
- pdimm->edc_config = 0x00;
-
- /*
- * The SPD spec has not the burst length byte
- * but DDR3 spec has nature BL8 and BC4,
- * BL8 -bit3, BC4 -bit2
- */
- pdimm->burst_lengths_bitmask = 0x0c;
- pdimm->row_density = __ilog2(pdimm->rank_density);
-
- /* MTB - medium timebase
- * The unit in the SPD spec is ns,
- * We convert it to ps.
- * eg: MTB = 0.125ns (125ps)
- */
- mtb_ps = (spd->mtb_dividend * 1000) /spd->mtb_divisor;
- pdimm->mtb_ps = mtb_ps;
-
- /*
- * FTB - fine timebase
- * use 1/10th of ps as our unit to avoid floating point
- * eg, 10 for 1ps, 25 for 2.5ps, 50 for 5ps
- */
- ftb_10th_ps =
- ((spd->ftb_div & 0xf0) >> 4) * 10 / (spd->ftb_div & 0x0f);
- pdimm->ftb_10th_ps = ftb_10th_ps;
- /*
- * sdram minimum cycle time
- * we assume the MTB is 0.125ns
- * eg:
- * tck_min=15 MTB (1.875ns) ->DDR3-1066
- * =12 MTB (1.5ns) ->DDR3-1333
- * =10 MTB (1.25ns) ->DDR3-1600
- */
- pdimm->tckmin_x_ps = spd->tck_min * mtb_ps +
- (spd->fine_tck_min * ftb_10th_ps) / 10;
-
- /*
- * CAS latency supported
- * bit4 - CL4
- * bit5 - CL5
- * bit18 - CL18
- */
- pdimm->caslat_x = ((spd->caslat_msb << 8) | spd->caslat_lsb) << 4;
-
- /*
- * min CAS latency time
- * eg: taa_min =
- * DDR3-800D 100 MTB (12.5ns)
- * DDR3-1066F 105 MTB (13.125ns)
- * DDR3-1333H 108 MTB (13.5ns)
- * DDR3-1600H 90 MTB (11.25ns)
- */
- pdimm->taa_ps = spd->taa_min * mtb_ps +
- (spd->fine_taa_min * ftb_10th_ps) / 10;
-
- /*
- * min write recovery time
- * eg:
- * twr_min = 120 MTB (15ns) -> all speed grades.
- */
- pdimm->twr_ps = spd->twr_min * mtb_ps;
-
- /*
- * min RAS to CAS delay time
- * eg: trcd_min =
- * DDR3-800 100 MTB (12.5ns)
- * DDR3-1066F 105 MTB (13.125ns)
- * DDR3-1333H 108 MTB (13.5ns)
- * DDR3-1600H 90 MTB (11.25)
- */
- pdimm->trcd_ps = spd->trcd_min * mtb_ps +
- (spd->fine_trcd_min * ftb_10th_ps) / 10;
-
- /*
- * min row active to row active delay time
- * eg: trrd_min =
- * DDR3-800(1KB page) 80 MTB (10ns)
- * DDR3-1333(1KB page) 48 MTB (6ns)
- */
- pdimm->trrd_ps = spd->trrd_min * mtb_ps;
-
- /*
- * min row precharge delay time
- * eg: trp_min =
- * DDR3-800D 100 MTB (12.5ns)
- * DDR3-1066F 105 MTB (13.125ns)
- * DDR3-1333H 108 MTB (13.5ns)
- * DDR3-1600H 90 MTB (11.25ns)
- */
- pdimm->trp_ps = spd->trp_min * mtb_ps +
- (spd->fine_trp_min * ftb_10th_ps) / 10;
-
- /* min active to precharge delay time
- * eg: tRAS_min =
- * DDR3-800D 300 MTB (37.5ns)
- * DDR3-1066F 300 MTB (37.5ns)
- * DDR3-1333H 288 MTB (36ns)
- * DDR3-1600H 280 MTB (35ns)
- */
- pdimm->tras_ps = (((spd->tras_trc_ext & 0xf) << 8) | spd->tras_min_lsb)
- * mtb_ps;
- /*
- * min active to actice/refresh delay time
- * eg: tRC_min =
- * DDR3-800D 400 MTB (50ns)
- * DDR3-1066F 405 MTB (50.625ns)
- * DDR3-1333H 396 MTB (49.5ns)
- * DDR3-1600H 370 MTB (46.25ns)
- */
- pdimm->trc_ps = (((spd->tras_trc_ext & 0xf0) << 4) | spd->trc_min_lsb)
- * mtb_ps + (spd->fine_trc_min * ftb_10th_ps) / 10;
- /*
- * min refresh recovery delay time
- * eg: tRFC_min =
- * 512Mb 720 MTB (90ns)
- * 1Gb 880 MTB (110ns)
- * 2Gb 1280 MTB (160ns)
- */
- pdimm->trfc_ps = ((spd->trfc_min_msb << 8) | spd->trfc_min_lsb)
- * mtb_ps;
- /*
- * min internal write to read command delay time
- * eg: twtr_min = 40 MTB (7.5ns) - all speed bins.
- * tWRT is at least 4 mclk independent of operating freq.
- */
- pdimm->twtr_ps = spd->twtr_min * mtb_ps;
-
- /*
- * min internal read to precharge command delay time
- * eg: trtp_min = 40 MTB (7.5ns) - all speed bins.
- * tRTP is at least 4 mclk independent of operating freq.
- */
- pdimm->trtp_ps = spd->trtp_min * mtb_ps;
-
- /*
- * Average periodic refresh interval
- * tREFI = 7.8 us at normal temperature range
- * = 3.9 us at ext temperature range
- */
- pdimm->refresh_rate_ps = 7800000;
- if ((spd->therm_ref_opt & 0x1) && !(spd->therm_ref_opt & 0x2)) {
- pdimm->refresh_rate_ps = 3900000;
- pdimm->extended_op_srt = 1;
- }
-
- /*
- * min four active window delay time
- * eg: tfaw_min =
- * DDR3-800(1KB page) 320 MTB (40ns)
- * DDR3-1066(1KB page) 300 MTB (37.5ns)
- * DDR3-1333(1KB page) 240 MTB (30ns)
- * DDR3-1600(1KB page) 240 MTB (30ns)
- */
- pdimm->tfaw_ps = (((spd->tfaw_msb & 0xf) << 8) | spd->tfaw_min)
- * mtb_ps;
-
- return 0;
-}
diff --git a/arch/powerpc/cpu/mpc8xxx/ddr/interactive.c b/arch/powerpc/cpu/mpc8xxx/ddr/interactive.c
deleted file mode 100644
index 3b661129cb..0000000000
--- a/arch/powerpc/cpu/mpc8xxx/ddr/interactive.c
+++ /dev/null
@@ -1,1870 +0,0 @@
-/*
- * Copyright 2010-2012 Freescale Semiconductor, Inc.
- *
- * SPDX-License-Identifier: GPL-2.0+
- */
-
-/*
- * Generic driver for Freescale DDR/DDR2/DDR3 memory controller.
- * Based on code from spd_sdram.c
- * Author: James Yang [at freescale.com]
- * York Sun [at freescale.com]
- */
-
-#include <common.h>
-#include <linux/ctype.h>
-#include <asm/types.h>
-
-#include <asm/fsl_ddr_sdram.h>
-#include "ddr.h"
-
-/* Option parameter Structures */
-struct options_string {
- const char *option_name;
- size_t offset;
- unsigned int size;
- const char printhex;
-};
-
-static unsigned int picos_to_mhz(unsigned int picos)
-{
- return 1000000 / picos;
-}
-
-static void print_option_table(const struct options_string *table,
- int table_size,
- const void *base)
-{
- unsigned int i;
- unsigned int *ptr;
- unsigned long long *ptr_l;
-
- for (i = 0; i < table_size; i++) {
- switch (table[i].size) {
- case 4:
- ptr = (unsigned int *) (base + table[i].offset);
- if (table[i].printhex) {
- printf("%s = 0x%08X\n",
- table[i].option_name, *ptr);
- } else {
- printf("%s = %u\n",
- table[i].option_name, *ptr);
- }
- break;
- case 8:
- ptr_l = (unsigned long long *) (base + table[i].offset);
- printf("%s = %llu\n",
- table[i].option_name, *ptr_l);
- break;
- default:
- printf("Unrecognized size!\n");
- break;
- }
- }
-}
-
-static int handle_option_table(const struct options_string *table,
- int table_size,
- void *base,
- const char *opt,
- const char *val)
-{
- unsigned int i;
- unsigned int value, *ptr;
- unsigned long long value_l, *ptr_l;
-
- for (i = 0; i < table_size; i++) {
- if (strcmp(table[i].option_name, opt) != 0)
- continue;
- switch (table[i].size) {
- case 4:
- value = simple_strtoul(val, NULL, 0);
- ptr = base + table[i].offset;
- *ptr = value;
- break;
- case 8:
- value_l = simple_strtoull(val, NULL, 0);
- ptr_l = base + table[i].offset;
- *ptr_l = value_l;
- break;
- default:
- printf("Unrecognized size!\n");
- break;
- }
- return 1;
- }
-
- return 0;
-}
-
-static void fsl_ddr_generic_edit(void *pdata,
- void *pend,
- unsigned int element_size,
- unsigned int element_num,
- unsigned int value)
-{
- char *pcdata = (char *)pdata; /* BIG ENDIAN ONLY */
-
- pcdata += element_num * element_size;
- if ((pcdata + element_size) > (char *) pend) {
- printf("trying to write past end of data\n");
- return;
- }
-
- switch (element_size) {
- case 1:
- __raw_writeb(value, pcdata);
- break;
- case 2:
- __raw_writew(value, pcdata);
- break;
- case 4:
- __raw_writel(value, pcdata);
- break;
- default:
- printf("unexpected element size %u\n", element_size);
- break;
- }
-}
-
-static void fsl_ddr_spd_edit(fsl_ddr_info_t *pinfo,
- unsigned int ctrl_num,
- unsigned int dimm_num,
- unsigned int element_num,
- unsigned int value)
-{
- generic_spd_eeprom_t *pspd;
-
- pspd = &(pinfo->spd_installed_dimms[ctrl_num][dimm_num]);
- fsl_ddr_generic_edit(pspd, pspd + 1, 1, element_num, value);
-}
-
-#define COMMON_TIMING(x) {#x, offsetof(common_timing_params_t, x), \
- sizeof((common_timing_params_t *)0)->x, 0}
-
-static void lowest_common_dimm_parameters_edit(fsl_ddr_info_t *pinfo,
- unsigned int ctrl_num,
- const char *optname_str,
- const char *value_str)
-{
- common_timing_params_t *p = &pinfo->common_timing_params[ctrl_num];
-
- static const struct options_string options[] = {
- COMMON_TIMING(tckmin_x_ps),
- COMMON_TIMING(tckmax_ps),
- COMMON_TIMING(tckmax_max_ps),
- COMMON_TIMING(trcd_ps),
- COMMON_TIMING(trp_ps),
- COMMON_TIMING(tras_ps),
- COMMON_TIMING(twr_ps),
- COMMON_TIMING(twtr_ps),
- COMMON_TIMING(trfc_ps),
- COMMON_TIMING(trrd_ps),
- COMMON_TIMING(trc_ps),
- COMMON_TIMING(refresh_rate_ps),
- COMMON_TIMING(tis_ps),
- COMMON_TIMING(tih_ps),
- COMMON_TIMING(tds_ps),
- COMMON_TIMING(tdh_ps),
- COMMON_TIMING(trtp_ps),
- COMMON_TIMING(tdqsq_max_ps),
- COMMON_TIMING(tqhs_ps),
- COMMON_TIMING(ndimms_present),
- COMMON_TIMING(lowest_common_SPD_caslat),
- COMMON_TIMING(highest_common_derated_caslat),
- COMMON_TIMING(additive_latency),
- COMMON_TIMING(all_dimms_burst_lengths_bitmask),
- COMMON_TIMING(all_dimms_registered),
- COMMON_TIMING(all_dimms_unbuffered),
- COMMON_TIMING(all_dimms_ecc_capable),
- COMMON_TIMING(total_mem),
- COMMON_TIMING(base_address),
- };
- static const unsigned int n_opts = ARRAY_SIZE(options);
-
- if (handle_option_table(options, n_opts, p, optname_str, value_str))
- return;
-
- printf("Error: couldn't find option string %s\n", optname_str);
-}
-
-#define DIMM_PARM(x) {#x, offsetof(dimm_params_t, x), \
- sizeof((dimm_params_t *)0)->x, 0}
-
-static void fsl_ddr_dimm_parameters_edit(fsl_ddr_info_t *pinfo,
- unsigned int ctrl_num,
- unsigned int dimm_num,
- const char *optname_str,
- const char *value_str)
-{
- dimm_params_t *p = &(pinfo->dimm_params[ctrl_num][dimm_num]);
-
- static const struct options_string options[] = {
- DIMM_PARM(n_ranks),
- DIMM_PARM(data_width),
- DIMM_PARM(primary_sdram_width),
- DIMM_PARM(ec_sdram_width),
- DIMM_PARM(registered_dimm),
- DIMM_PARM(device_width),
-
- DIMM_PARM(n_row_addr),
- DIMM_PARM(n_col_addr),
- DIMM_PARM(edc_config),
- DIMM_PARM(n_banks_per_sdram_device),
- DIMM_PARM(burst_lengths_bitmask),
- DIMM_PARM(row_density),
-
- DIMM_PARM(tckmin_x_ps),
- DIMM_PARM(tckmin_x_minus_1_ps),
- DIMM_PARM(tckmin_x_minus_2_ps),
- DIMM_PARM(tckmax_ps),
-
- DIMM_PARM(caslat_x),
- DIMM_PARM(caslat_x_minus_1),
- DIMM_PARM(caslat_x_minus_2),
-
- DIMM_PARM(caslat_lowest_derated),
-
- DIMM_PARM(trcd_ps),
- DIMM_PARM(trp_ps),
- DIMM_PARM(tras_ps),
- DIMM_PARM(twr_ps),
- DIMM_PARM(twtr_ps),
- DIMM_PARM(trfc_ps),
- DIMM_PARM(trrd_ps),
- DIMM_PARM(trc_ps),
- DIMM_PARM(refresh_rate_ps),
-
- DIMM_PARM(tis_ps),
- DIMM_PARM(tih_ps),
- DIMM_PARM(tds_ps),
- DIMM_PARM(tdh_ps),
- DIMM_PARM(trtp_ps),
- DIMM_PARM(tdqsq_max_ps),
- DIMM_PARM(tqhs_ps),
-
- DIMM_PARM(rank_density),
- DIMM_PARM(capacity),
- DIMM_PARM(base_address),
- };
-
- static const unsigned int n_opts = ARRAY_SIZE(options);
-
- if (handle_option_table(options, n_opts, p, optname_str, value_str))
- return;
-
- printf("couldn't find option string %s\n", optname_str);
-}
-
-static void print_dimm_parameters(const dimm_params_t *pdimm)
-{
- static const struct options_string options[] = {
- DIMM_PARM(n_ranks),
- DIMM_PARM(data_width),
- DIMM_PARM(primary_sdram_width),
- DIMM_PARM(ec_sdram_width),
- DIMM_PARM(registered_dimm),
- DIMM_PARM(device_width),
-
- DIMM_PARM(n_row_addr),
- DIMM_PARM(n_col_addr),
- DIMM_PARM(edc_config),
- DIMM_PARM(n_banks_per_sdram_device),
-
- DIMM_PARM(tckmin_x_ps),
- DIMM_PARM(tckmin_x_minus_1_ps),
- DIMM_PARM(tckmin_x_minus_2_ps),
- DIMM_PARM(tckmax_ps),
-
- DIMM_PARM(caslat_x),
- DIMM_PARM(taa_ps),
- DIMM_PARM(caslat_x_minus_1),
- DIMM_PARM(caslat_x_minus_2),
- DIMM_PARM(caslat_lowest_derated),
-
- DIMM_PARM(trcd_ps),
- DIMM_PARM(trp_ps),
- DIMM_PARM(tras_ps),
- DIMM_PARM(twr_ps),
- DIMM_PARM(twtr_ps),
- DIMM_PARM(trfc_ps),
- DIMM_PARM(trrd_ps),
- DIMM_PARM(trc_ps),
- DIMM_PARM(refresh_rate_ps),
-
- DIMM_PARM(tis_ps),
- DIMM_PARM(tih_ps),
- DIMM_PARM(tds_ps),
- DIMM_PARM(tdh_ps),
- DIMM_PARM(trtp_ps),
- DIMM_PARM(tdqsq_max_ps),
- DIMM_PARM(tqhs_ps),
- };
- static const unsigned int n_opts = ARRAY_SIZE(options);
-
- if (pdimm->n_ranks == 0) {
- printf("DIMM not present\n");
- return;
- }
- printf("DIMM organization parameters:\n");
- printf("module part name = %s\n", pdimm->mpart);
- printf("rank_density = %llu bytes (%llu megabytes)\n",
- pdimm->rank_density, pdimm->rank_density / 0x100000);
- printf("capacity = %llu bytes (%llu megabytes)\n",
- pdimm->capacity, pdimm->capacity / 0x100000);
- printf("burst_lengths_bitmask = %02X\n",
- pdimm->burst_lengths_bitmask);
- printf("base_addresss = %llu (%08llX %08llX)\n",
- pdimm->base_address,
- (pdimm->base_address >> 32),
- pdimm->base_address & 0xFFFFFFFF);
- print_option_table(options, n_opts, pdimm);
-}
-
-static void print_lowest_common_dimm_parameters(
- const common_timing_params_t *plcd_dimm_params)
-{
- static const struct options_string options[] = {
- COMMON_TIMING(tckmax_max_ps),
- COMMON_TIMING(trcd_ps),
- COMMON_TIMING(trp_ps),
- COMMON_TIMING(tras_ps),
- COMMON_TIMING(twr_ps),
- COMMON_TIMING(twtr_ps),
- COMMON_TIMING(trfc_ps),
- COMMON_TIMING(trrd_ps),
- COMMON_TIMING(trc_ps),
- COMMON_TIMING(refresh_rate_ps),
- COMMON_TIMING(tis_ps),
- COMMON_TIMING(tds_ps),
- COMMON_TIMING(tdh_ps),
- COMMON_TIMING(trtp_ps),
- COMMON_TIMING(tdqsq_max_ps),
- COMMON_TIMING(tqhs_ps),
- COMMON_TIMING(lowest_common_SPD_caslat),
- COMMON_TIMING(highest_common_derated_caslat),
- COMMON_TIMING(additive_latency),
- COMMON_TIMING(ndimms_present),
- COMMON_TIMING(all_dimms_registered),
- COMMON_TIMING(all_dimms_unbuffered),
- COMMON_TIMING(all_dimms_ecc_capable),
- };
- static const unsigned int n_opts = ARRAY_SIZE(options);
-
- /* Clock frequencies */
- printf("tckmin_x_ps = %u (%u MHz)\n",
- plcd_dimm_params->tckmin_x_ps,
- picos_to_mhz(plcd_dimm_params->tckmin_x_ps));
- printf("tckmax_ps = %u (%u MHz)\n",
- plcd_dimm_params->tckmax_ps,
- picos_to_mhz(plcd_dimm_params->tckmax_ps));
- printf("all_dimms_burst_lengths_bitmask = %02X\n",
- plcd_dimm_params->all_dimms_burst_lengths_bitmask);
-
- print_option_table(options, n_opts, plcd_dimm_params);
-
- printf("total_mem = %llu (%llu megabytes)\n",
- plcd_dimm_params->total_mem,
- plcd_dimm_params->total_mem / 0x100000);
- printf("base_address = %llu (%llu megabytes)\n",
- plcd_dimm_params->base_address,
- plcd_dimm_params->base_address / 0x100000);
-}
-
-#define CTRL_OPTIONS(x) {#x, offsetof(memctl_options_t, x), \
- sizeof((memctl_options_t *)0)->x, 0}
-#define CTRL_OPTIONS_CS(x, y) {"cs" #x "_" #y, \
- offsetof(memctl_options_t, cs_local_opts[x].y), \
- sizeof((memctl_options_t *)0)->cs_local_opts[x].y, 0}
-
-static void fsl_ddr_options_edit(fsl_ddr_info_t *pinfo,
- unsigned int ctl_num,
- const char *optname_str,
- const char *value_str)
-{
- memctl_options_t *p = &(pinfo->memctl_opts[ctl_num]);
- /*
- * This array all on the stack and *computed* each time this
- * function is rung.
- */
- static const struct options_string options[] = {
- CTRL_OPTIONS_CS(0, odt_rd_cfg),
- CTRL_OPTIONS_CS(0, odt_wr_cfg),
-#if (CONFIG_CHIP_SELECTS_PER_CTRL > 1)
- CTRL_OPTIONS_CS(1, odt_rd_cfg),
- CTRL_OPTIONS_CS(1, odt_wr_cfg),
-#endif
-#if (CONFIG_CHIP_SELECTS_PER_CTRL > 2)
- CTRL_OPTIONS_CS(2, odt_rd_cfg),
- CTRL_OPTIONS_CS(2, odt_wr_cfg),
-#endif
-#if (CONFIG_CHIP_SELECTS_PER_CTRL > 2)
- CTRL_OPTIONS_CS(3, odt_rd_cfg),
- CTRL_OPTIONS_CS(3, odt_wr_cfg),
-#endif
-#if defined(CONFIG_FSL_DDR3)
- CTRL_OPTIONS_CS(0, odt_rtt_norm),
- CTRL_OPTIONS_CS(0, odt_rtt_wr),
-#if (CONFIG_CHIP_SELECTS_PER_CTRL > 1)
- CTRL_OPTIONS_CS(1, odt_rtt_norm),
- CTRL_OPTIONS_CS(1, odt_rtt_wr),
-#endif
-#if (CONFIG_CHIP_SELECTS_PER_CTRL > 2)
- CTRL_OPTIONS_CS(2, odt_rtt_norm),
- CTRL_OPTIONS_CS(2, odt_rtt_wr),
-#endif
-#if (CONFIG_CHIP_SELECTS_PER_CTRL > 2)
- CTRL_OPTIONS_CS(3, odt_rtt_norm),
- CTRL_OPTIONS_CS(3, odt_rtt_wr),
-#endif
-#endif
- CTRL_OPTIONS(memctl_interleaving),
- CTRL_OPTIONS(memctl_interleaving_mode),
- CTRL_OPTIONS(ba_intlv_ctl),
- CTRL_OPTIONS(ecc_mode),
- CTRL_OPTIONS(ecc_init_using_memctl),
- CTRL_OPTIONS(dqs_config),
- CTRL_OPTIONS(self_refresh_in_sleep),
- CTRL_OPTIONS(dynamic_power),
- CTRL_OPTIONS(data_bus_width),
- CTRL_OPTIONS(burst_length),
- CTRL_OPTIONS(cas_latency_override),
- CTRL_OPTIONS(cas_latency_override_value),
- CTRL_OPTIONS(use_derated_caslat),
- CTRL_OPTIONS(additive_latency_override),
- CTRL_OPTIONS(additive_latency_override_value),
- CTRL_OPTIONS(clk_adjust),
- CTRL_OPTIONS(cpo_override),
- CTRL_OPTIONS(write_data_delay),
- CTRL_OPTIONS(half_strength_driver_enable),
-
- /*
- * These can probably be changed to 2T_EN and 3T_EN
- * (using a leading numerical character) without problem
- */
- CTRL_OPTIONS(twot_en),
- CTRL_OPTIONS(threet_en),
- CTRL_OPTIONS(ap_en),
- CTRL_OPTIONS(x4_en),
- CTRL_OPTIONS(bstopre),
- CTRL_OPTIONS(wrlvl_override),
- CTRL_OPTIONS(wrlvl_sample),
- CTRL_OPTIONS(wrlvl_start),
- CTRL_OPTIONS(rcw_override),
- CTRL_OPTIONS(rcw_1),
- CTRL_OPTIONS(rcw_2),
- CTRL_OPTIONS(ddr_cdr1),
- CTRL_OPTIONS(ddr_cdr2),
- CTRL_OPTIONS(tcke_clock_pulse_width_ps),
- CTRL_OPTIONS(tfaw_window_four_activates_ps),
- CTRL_OPTIONS(trwt_override),
- CTRL_OPTIONS(trwt),
- };
-
- static const unsigned int n_opts = ARRAY_SIZE(options);
-
- if (handle_option_table(options, n_opts, p,
- optname_str, value_str))
- return;
-
- printf("couldn't find option string %s\n", optname_str);
-}
-
-#define CFG_REGS(x) {#x, offsetof(fsl_ddr_cfg_regs_t, x), \
- sizeof((fsl_ddr_cfg_regs_t *)0)->x, 1}
-#define CFG_REGS_CS(x, y) {"cs" #x "_" #y, \
- offsetof(fsl_ddr_cfg_regs_t, cs[x].y), \
- sizeof((fsl_ddr_cfg_regs_t *)0)->cs[x].y, 1}
-
-static void print_fsl_memctl_config_regs(const fsl_ddr_cfg_regs_t *ddr)
-{
- unsigned int i;
- static const struct options_string options[] = {
- CFG_REGS_CS(0, bnds),
- CFG_REGS_CS(0, config),
- CFG_REGS_CS(0, config_2),
-#if (CONFIG_CHIP_SELECTS_PER_CTRL > 1)
- CFG_REGS_CS(1, bnds),
- CFG_REGS_CS(1, config),
- CFG_REGS_CS(1, config_2),
-#endif
-#if (CONFIG_CHIP_SELECTS_PER_CTRL > 2)
- CFG_REGS_CS(2, bnds),
- CFG_REGS_CS(2, config),
- CFG_REGS_CS(2, config_2),
-#endif
-#if (CONFIG_CHIP_SELECTS_PER_CTRL > 2)
- CFG_REGS_CS(3, bnds),
- CFG_REGS_CS(3, config),
- CFG_REGS_CS(3, config_2),
-#endif
- CFG_REGS(timing_cfg_3),
- CFG_REGS(timing_cfg_0),
- CFG_REGS(timing_cfg_1),
- CFG_REGS(timing_cfg_2),
- CFG_REGS(ddr_sdram_cfg),
- CFG_REGS(ddr_sdram_cfg_2),
- CFG_REGS(ddr_sdram_mode),
- CFG_REGS(ddr_sdram_mode_2),
- CFG_REGS(ddr_sdram_mode_3),
- CFG_REGS(ddr_sdram_mode_4),
- CFG_REGS(ddr_sdram_mode_5),
- CFG_REGS(ddr_sdram_mode_6),
- CFG_REGS(ddr_sdram_mode_7),
- CFG_REGS(ddr_sdram_mode_8),
- CFG_REGS(ddr_sdram_interval),
- CFG_REGS(ddr_data_init),
- CFG_REGS(ddr_sdram_clk_cntl),
- CFG_REGS(ddr_init_addr),
- CFG_REGS(ddr_init_ext_addr),
- CFG_REGS(timing_cfg_4),
- CFG_REGS(timing_cfg_5),
- CFG_REGS(ddr_zq_cntl),
- CFG_REGS(ddr_wrlvl_cntl),
- CFG_REGS(ddr_wrlvl_cntl_2),
- CFG_REGS(ddr_wrlvl_cntl_3),
- CFG_REGS(ddr_sr_cntr),
- CFG_REGS(ddr_sdram_rcw_1),
- CFG_REGS(ddr_sdram_rcw_2),
- CFG_REGS(ddr_cdr1),
- CFG_REGS(ddr_cdr2),
- CFG_REGS(err_disable),
- CFG_REGS(err_int_en),
- CFG_REGS(ddr_eor),
- };
- static const unsigned int n_opts = ARRAY_SIZE(options);
-
- print_option_table(options, n_opts, ddr);
-
- for (i = 0; i < 32; i++)
- printf("debug_%02d = 0x%08X\n", i+1, ddr->debug[i]);
-}
-
-static void fsl_ddr_regs_edit(fsl_ddr_info_t *pinfo,
- unsigned int ctrl_num,
- const char *regname,
- const char *value_str)
-{
- unsigned int i;
- fsl_ddr_cfg_regs_t *ddr;
- char buf[20];
- static const struct options_string options[] = {
- CFG_REGS_CS(0, bnds),
- CFG_REGS_CS(0, config),
- CFG_REGS_CS(0, config_2),
-#if (CONFIG_CHIP_SELECTS_PER_CTRL > 1)
- CFG_REGS_CS(1, bnds),
- CFG_REGS_CS(1, config),
- CFG_REGS_CS(1, config_2),
-#endif
-#if (CONFIG_CHIP_SELECTS_PER_CTRL > 2)
- CFG_REGS_CS(2, bnds),
- CFG_REGS_CS(2, config),
- CFG_REGS_CS(2, config_2),
-#endif
-#if (CONFIG_CHIP_SELECTS_PER_CTRL > 3)
- CFG_REGS_CS(3, bnds),
- CFG_REGS_CS(3, config),
- CFG_REGS_CS(3, config_2),
-#endif
- CFG_REGS(timing_cfg_3),
- CFG_REGS(timing_cfg_0),
- CFG_REGS(timing_cfg_1),
- CFG_REGS(timing_cfg_2),
- CFG_REGS(ddr_sdram_cfg),
- CFG_REGS(ddr_sdram_cfg_2),
- CFG_REGS(ddr_sdram_mode),
- CFG_REGS(ddr_sdram_mode_2),
- CFG_REGS(ddr_sdram_mode_3),
- CFG_REGS(ddr_sdram_mode_4),
- CFG_REGS(ddr_sdram_mode_5),
- CFG_REGS(ddr_sdram_mode_6),
- CFG_REGS(ddr_sdram_mode_7),
- CFG_REGS(ddr_sdram_mode_8),
- CFG_REGS(ddr_sdram_interval),
- CFG_REGS(ddr_data_init),
- CFG_REGS(ddr_sdram_clk_cntl),
- CFG_REGS(ddr_init_addr),
- CFG_REGS(ddr_init_ext_addr),
- CFG_REGS(timing_cfg_4),
- CFG_REGS(timing_cfg_5),
- CFG_REGS(ddr_zq_cntl),
- CFG_REGS(ddr_wrlvl_cntl),
- CFG_REGS(ddr_wrlvl_cntl_2),
- CFG_REGS(ddr_wrlvl_cntl_3),
- CFG_REGS(ddr_sr_cntr),
- CFG_REGS(ddr_sdram_rcw_1),
- CFG_REGS(ddr_sdram_rcw_2),
- CFG_REGS(ddr_cdr1),
- CFG_REGS(ddr_cdr2),
- CFG_REGS(err_disable),
- CFG_REGS(err_int_en),
- CFG_REGS(ddr_sdram_rcw_2),
- CFG_REGS(ddr_sdram_rcw_2),
- CFG_REGS(ddr_eor),
- };
- static const unsigned int n_opts = ARRAY_SIZE(options);
-
- debug("fsl_ddr_regs_edit: ctrl_num = %u, "
- "regname = %s, value = %s\n",
- ctrl_num, regname, value_str);
- if (ctrl_num > CONFIG_NUM_DDR_CONTROLLERS)
- return;
-
- ddr = &(pinfo->fsl_ddr_config_reg[ctrl_num]);
-
- if (handle_option_table(options, n_opts, ddr, regname, value_str))
- return;
-
- for (i = 0; i < 32; i++) {
- unsigned int value = simple_strtoul(value_str, NULL, 0);
- sprintf(buf, "debug_%u", i + 1);
- if (strcmp(buf, regname) == 0) {
- ddr->debug[i] = value;
- return;
- }
- }
- printf("Error: couldn't find register string %s\n", regname);
-}
-
-#define CTRL_OPTIONS_HEX(x) {#x, offsetof(memctl_options_t, x), \
- sizeof((memctl_options_t *)0)->x, 1}
-
-static void print_memctl_options(const memctl_options_t *popts)
-{
- static const struct options_string options[] = {
- CTRL_OPTIONS_CS(0, odt_rd_cfg),
- CTRL_OPTIONS_CS(0, odt_wr_cfg),
-#if (CONFIG_CHIP_SELECTS_PER_CTRL > 1)
- CTRL_OPTIONS_CS(1, odt_rd_cfg),
- CTRL_OPTIONS_CS(1, odt_wr_cfg),
-#endif
-#if (CONFIG_CHIP_SELECTS_PER_CTRL > 2)
- CTRL_OPTIONS_CS(2, odt_rd_cfg),
- CTRL_OPTIONS_CS(2, odt_wr_cfg),
-#endif
-#if (CONFIG_CHIP_SELECTS_PER_CTRL > 3)
- CTRL_OPTIONS_CS(3, odt_rd_cfg),
- CTRL_OPTIONS_CS(3, odt_wr_cfg),
-#endif
-#if defined(CONFIG_FSL_DDR3)
- CTRL_OPTIONS_CS(0, odt_rtt_norm),
- CTRL_OPTIONS_CS(0, odt_rtt_wr),
-#if (CONFIG_CHIP_SELECTS_PER_CTRL > 1)
- CTRL_OPTIONS_CS(1, odt_rtt_norm),
- CTRL_OPTIONS_CS(1, odt_rtt_wr),
-#endif
-#if (CONFIG_CHIP_SELECTS_PER_CTRL > 2)
- CTRL_OPTIONS_CS(2, odt_rtt_norm),
- CTRL_OPTIONS_CS(2, odt_rtt_wr),
-#endif
-#if (CONFIG_CHIP_SELECTS_PER_CTRL > 3)
- CTRL_OPTIONS_CS(3, odt_rtt_norm),
- CTRL_OPTIONS_CS(3, odt_rtt_wr),
-#endif
-#endif
- CTRL_OPTIONS(memctl_interleaving),
- CTRL_OPTIONS(memctl_interleaving_mode),
- CTRL_OPTIONS_HEX(ba_intlv_ctl),
- CTRL_OPTIONS(ecc_mode),
- CTRL_OPTIONS(ecc_init_using_memctl),
- CTRL_OPTIONS(dqs_config),
- CTRL_OPTIONS(self_refresh_in_sleep),
- CTRL_OPTIONS(dynamic_power),
- CTRL_OPTIONS(data_bus_width),
- CTRL_OPTIONS(burst_length),
- CTRL_OPTIONS(cas_latency_override),
- CTRL_OPTIONS(cas_latency_override_value),
- CTRL_OPTIONS(use_derated_caslat),
- CTRL_OPTIONS(additive_latency_override),
- CTRL_OPTIONS(additive_latency_override_value),
- CTRL_OPTIONS(clk_adjust),
- CTRL_OPTIONS(cpo_override),
- CTRL_OPTIONS(write_data_delay),
- CTRL_OPTIONS(half_strength_driver_enable),
- /*
- * These can probably be changed to 2T_EN and 3T_EN
- * (using a leading numerical character) without problem
- */
- CTRL_OPTIONS(twot_en),
- CTRL_OPTIONS(threet_en),
- CTRL_OPTIONS(registered_dimm_en),
- CTRL_OPTIONS(ap_en),
- CTRL_OPTIONS(x4_en),
- CTRL_OPTIONS(bstopre),
- CTRL_OPTIONS(wrlvl_override),
- CTRL_OPTIONS(wrlvl_sample),
- CTRL_OPTIONS(wrlvl_start),
- CTRL_OPTIONS(rcw_override),
- CTRL_OPTIONS(rcw_1),
- CTRL_OPTIONS(rcw_2),
- CTRL_OPTIONS_HEX(ddr_cdr1),
- CTRL_OPTIONS_HEX(ddr_cdr2),
- CTRL_OPTIONS(tcke_clock_pulse_width_ps),
- CTRL_OPTIONS(tfaw_window_four_activates_ps),
- CTRL_OPTIONS(trwt_override),
- CTRL_OPTIONS(trwt),
- };
- static const unsigned int n_opts = ARRAY_SIZE(options);
-
- print_option_table(options, n_opts, popts);
-}
-
-#ifdef CONFIG_FSL_DDR1
-void ddr1_spd_dump(const ddr1_spd_eeprom_t *spd)
-{
- unsigned int i;
-
- printf("%-3d : %02x %s\n", 0, spd->info_size,
- " spd->info_size, * 0 # bytes written into serial memory *");
- printf("%-3d : %02x %s\n", 1, spd->chip_size,
- " spd->chip_size, * 1 Total # bytes of SPD memory device *");
- printf("%-3d : %02x %s\n", 2, spd->mem_type,
- " spd->mem_type, * 2 Fundamental memory type *");
- printf("%-3d : %02x %s\n", 3, spd->nrow_addr,
- " spd->nrow_addr, * 3 # of Row Addresses on this assembly *");
- printf("%-3d : %02x %s\n", 4, spd->ncol_addr,
- " spd->ncol_addr, * 4 # of Column Addrs on this assembly *");
- printf("%-3d : %02x %s\n", 5, spd->nrows,
- " spd->nrows * 5 # of DIMM Banks *");
- printf("%-3d : %02x %s\n", 6, spd->dataw_lsb,
- " spd->dataw_lsb, * 6 Data Width lsb of this assembly *");
- printf("%-3d : %02x %s\n", 7, spd->dataw_msb,
- " spd->dataw_msb, * 7 Data Width msb of this assembly *");
- printf("%-3d : %02x %s\n", 8, spd->voltage,
- " spd->voltage, * 8 Voltage intf std of this assembly *");
- printf("%-3d : %02x %s\n", 9, spd->clk_cycle,
- " spd->clk_cycle, * 9 SDRAM Cycle time at CL=X *");
- printf("%-3d : %02x %s\n", 10, spd->clk_access,
- " spd->clk_access, * 10 SDRAM Access from Clock at CL=X *");
- printf("%-3d : %02x %s\n", 11, spd->config,
- " spd->config, * 11 DIMM Configuration type *");
- printf("%-3d : %02x %s\n", 12, spd->refresh,
- " spd->refresh, * 12 Refresh Rate/Type *");
- printf("%-3d : %02x %s\n", 13, spd->primw,
- " spd->primw, * 13 Primary SDRAM Width *");
- printf("%-3d : %02x %s\n", 14, spd->ecw,
- " spd->ecw, * 14 Error Checking SDRAM width *");
- printf("%-3d : %02x %s\n", 15, spd->min_delay,
- " spd->min_delay, * 15 Back to Back Random Access *");
- printf("%-3d : %02x %s\n", 16, spd->burstl,
- " spd->burstl, * 16 Burst Lengths Supported *");
- printf("%-3d : %02x %s\n", 17, spd->nbanks,
- " spd->nbanks, * 17 # of Banks on Each SDRAM Device *");
- printf("%-3d : %02x %s\n", 18, spd->cas_lat,
- " spd->cas_lat, * 18 CAS# Latencies Supported *");
- printf("%-3d : %02x %s\n", 19, spd->cs_lat,
- " spd->cs_lat, * 19 Chip Select Latency *");
- printf("%-3d : %02x %s\n", 20, spd->write_lat,
- " spd->write_lat, * 20 Write Latency/Recovery *");
- printf("%-3d : %02x %s\n", 21, spd->mod_attr,
- " spd->mod_attr, * 21 SDRAM Module Attributes *");
- printf("%-3d : %02x %s\n", 22, spd->dev_attr,
- " spd->dev_attr, * 22 SDRAM Device Attributes *");
- printf("%-3d : %02x %s\n", 23, spd->clk_cycle2,
- " spd->clk_cycle2, * 23 Min SDRAM Cycle time at CL=X-1 *");
- printf("%-3d : %02x %s\n", 24, spd->clk_access2,
- " spd->clk_access2, * 24 SDRAM Access from Clock at CL=X-1 *");
- printf("%-3d : %02x %s\n", 25, spd->clk_cycle3,
- " spd->clk_cycle3, * 25 Min SDRAM Cycle time at CL=X-2 *");
- printf("%-3d : %02x %s\n", 26, spd->clk_access3,
- " spd->clk_access3, * 26 Max Access from Clock at CL=X-2 *");
- printf("%-3d : %02x %s\n", 27, spd->trp,
- " spd->trp, * 27 Min Row Precharge Time (tRP)*");
- printf("%-3d : %02x %s\n", 28, spd->trrd,
- " spd->trrd, * 28 Min Row Active to Row Active (tRRD) *");
- printf("%-3d : %02x %s\n", 29, spd->trcd,
- " spd->trcd, * 29 Min RAS to CAS Delay (tRCD) *");
- printf("%-3d : %02x %s\n", 30, spd->tras,
- " spd->tras, * 30 Minimum RAS Pulse Width (tRAS) *");
- printf("%-3d : %02x %s\n", 31, spd->bank_dens,
- " spd->bank_dens, * 31 Density of each bank on module *");
- printf("%-3d : %02x %s\n", 32, spd->ca_setup,
- " spd->ca_setup, * 32 Cmd + Addr signal input setup time *");
- printf("%-3d : %02x %s\n", 33, spd->ca_hold,
- " spd->ca_hold, * 33 Cmd and Addr signal input hold time *");
- printf("%-3d : %02x %s\n", 34, spd->data_setup,
- " spd->data_setup, * 34 Data signal input setup time *");
- printf("%-3d : %02x %s\n", 35, spd->data_hold,
- " spd->data_hold, * 35 Data signal input hold time *");
- printf("%-3d : %02x %s\n", 36, spd->res_36_40[0],
- " spd->res_36_40[0], * 36 Reserved / tWR *");
- printf("%-3d : %02x %s\n", 37, spd->res_36_40[1],
- " spd->res_36_40[1], * 37 Reserved / tWTR *");
- printf("%-3d : %02x %s\n", 38, spd->res_36_40[2],
- " spd->res_36_40[2], * 38 Reserved / tRTP *");
- printf("%-3d : %02x %s\n", 39, spd->res_36_40[3],
- " spd->res_36_40[3], * 39 Reserved / mem_probe *");
- printf("%-3d : %02x %s\n", 40, spd->res_36_40[4],
- " spd->res_36_40[4], * 40 Reserved / trc,trfc extensions *");
- printf("%-3d : %02x %s\n", 41, spd->trc,
- " spd->trc, * 41 Min Active to Auto refresh time tRC *");
- printf("%-3d : %02x %s\n", 42, spd->trfc,
- " spd->trfc, * 42 Min Auto to Active period tRFC *");
- printf("%-3d : %02x %s\n", 43, spd->tckmax,
- " spd->tckmax, * 43 Max device cycle time tCKmax *");
- printf("%-3d : %02x %s\n", 44, spd->tdqsq,
- " spd->tdqsq, * 44 Max DQS to DQ skew *");
- printf("%-3d : %02x %s\n", 45, spd->tqhs,
- " spd->tqhs, * 45 Max Read DataHold skew tQHS *");
- printf("%-3d : %02x %s\n", 46, spd->res_46,
- " spd->res_46, * 46 Reserved/ PLL Relock time *");
- printf("%-3d : %02x %s\n", 47, spd->dimm_height,
- " spd->dimm_height * 47 SDRAM DIMM Height *");
-
- printf("%-3d-%3d: ", 48, 61);
-
- for (i = 0; i < 14; i++)
- printf("%02x", spd->res_48_61[i]);
-
- printf(" * 48-61 IDD in SPD and Reserved space *\n");
-
- printf("%-3d : %02x %s\n", 62, spd->spd_rev,
- " spd->spd_rev, * 62 SPD Data Revision Code *");
- printf("%-3d : %02x %s\n", 63, spd->cksum,
- " spd->cksum, * 63 Checksum for bytes 0-62 *");
- printf("%-3d-%3d: ", 64, 71);
-
- for (i = 0; i < 8; i++)
- printf("%02x", spd->mid[i]);
-
- printf("* 64 Mfr's JEDEC ID code per JEP-108E *\n");
- printf("%-3d : %02x %s\n", 72, spd->mloc,
- " spd->mloc, * 72 Manufacturing Location *");
-
- printf("%-3d-%3d: >>", 73, 90);
-
- for (i = 0; i < 18; i++)
- printf("%c", spd->mpart[i]);
-
- printf("<<* 73 Manufacturer's Part Number *\n");
-
- printf("%-3d-%3d: %02x %02x %s\n", 91, 92, spd->rev[0], spd->rev[1],
- "* 91 Revision Code *");
- printf("%-3d-%3d: %02x %02x %s\n", 93, 94, spd->mdate[0], spd->mdate[1],
- "* 93 Manufacturing Date *");
- printf("%-3d-%3d: ", 95, 98);
-
- for (i = 0; i < 4; i++)
- printf("%02x", spd->sernum[i]);
-
- printf("* 95 Assembly Serial Number *\n");
-
- printf("%-3d-%3d: ", 99, 127);
-
- for (i = 0; i < 27; i++)
- printf("%02x", spd->mspec[i]);
-
- printf("* 99 Manufacturer Specific Data *\n");
-}
-#endif
-
-#ifdef CONFIG_FSL_DDR2
-void ddr2_spd_dump(const ddr2_spd_eeprom_t *spd)
-{
- unsigned int i;
-
- printf("%-3d : %02x %s\n", 0, spd->info_size,
- " spd->info_size, * 0 # bytes written into serial memory *");
- printf("%-3d : %02x %s\n", 1, spd->chip_size,
- " spd->chip_size, * 1 Total # bytes of SPD memory device *");
- printf("%-3d : %02x %s\n", 2, spd->mem_type,
- " spd->mem_type, * 2 Fundamental memory type *");
- printf("%-3d : %02x %s\n", 3, spd->nrow_addr,
- " spd->nrow_addr, * 3 # of Row Addresses on this assembly *");
- printf("%-3d : %02x %s\n", 4, spd->ncol_addr,
- " spd->ncol_addr, * 4 # of Column Addrs on this assembly *");
- printf("%-3d : %02x %s\n", 5, spd->mod_ranks,
- " spd->mod_ranks * 5 # of Module Rows on this assembly *");
- printf("%-3d : %02x %s\n", 6, spd->dataw,
- " spd->dataw, * 6 Data Width of this assembly *");
- printf("%-3d : %02x %s\n", 7, spd->res_7,
- " spd->res_7, * 7 Reserved *");
- printf("%-3d : %02x %s\n", 8, spd->voltage,
- " spd->voltage, * 8 Voltage intf std of this assembly *");
- printf("%-3d : %02x %s\n", 9, spd->clk_cycle,
- " spd->clk_cycle, * 9 SDRAM Cycle time at CL=X *");
- printf("%-3d : %02x %s\n", 10, spd->clk_access,
- " spd->clk_access, * 10 SDRAM Access from Clock at CL=X *");
- printf("%-3d : %02x %s\n", 11, spd->config,
- " spd->config, * 11 DIMM Configuration type *");
- printf("%-3d : %02x %s\n", 12, spd->refresh,
- " spd->refresh, * 12 Refresh Rate/Type *");
- printf("%-3d : %02x %s\n", 13, spd->primw,
- " spd->primw, * 13 Primary SDRAM Width *");
- printf("%-3d : %02x %s\n", 14, spd->ecw,
- " spd->ecw, * 14 Error Checking SDRAM width *");
- printf("%-3d : %02x %s\n", 15, spd->res_15,
- " spd->res_15, * 15 Reserved *");
- printf("%-3d : %02x %s\n", 16, spd->burstl,
- " spd->burstl, * 16 Burst Lengths Supported *");
- printf("%-3d : %02x %s\n", 17, spd->nbanks,
- " spd->nbanks, * 17 # of Banks on Each SDRAM Device *");
- printf("%-3d : %02x %s\n", 18, spd->cas_lat,
- " spd->cas_lat, * 18 CAS# Latencies Supported *");
- printf("%-3d : %02x %s\n", 19, spd->mech_char,
- " spd->mech_char, * 19 Mechanical Characteristics *");
- printf("%-3d : %02x %s\n", 20, spd->dimm_type,
- " spd->dimm_type, * 20 DIMM type *");
- printf("%-3d : %02x %s\n", 21, spd->mod_attr,
- " spd->mod_attr, * 21 SDRAM Module Attributes *");
- printf("%-3d : %02x %s\n", 22, spd->dev_attr,
- " spd->dev_attr, * 22 SDRAM Device Attributes *");
- printf("%-3d : %02x %s\n", 23, spd->clk_cycle2,
- " spd->clk_cycle2, * 23 Min SDRAM Cycle time at CL=X-1 *");
- printf("%-3d : %02x %s\n", 24, spd->clk_access2,
- " spd->clk_access2, * 24 SDRAM Access from Clock at CL=X-1 *");
- printf("%-3d : %02x %s\n", 25, spd->clk_cycle3,
- " spd->clk_cycle3, * 25 Min SDRAM Cycle time at CL=X-2 *");
- printf("%-3d : %02x %s\n", 26, spd->clk_access3,
- " spd->clk_access3, * 26 Max Access from Clock at CL=X-2 *");
- printf("%-3d : %02x %s\n", 27, spd->trp,
- " spd->trp, * 27 Min Row Precharge Time (tRP)*");
- printf("%-3d : %02x %s\n", 28, spd->trrd,
- " spd->trrd, * 28 Min Row Active to Row Active (tRRD) *");
- printf("%-3d : %02x %s\n", 29, spd->trcd,
- " spd->trcd, * 29 Min RAS to CAS Delay (tRCD) *");
- printf("%-3d : %02x %s\n", 30, spd->tras,
- " spd->tras, * 30 Minimum RAS Pulse Width (tRAS) *");
- printf("%-3d : %02x %s\n", 31, spd->rank_dens,
- " spd->rank_dens, * 31 Density of each rank on module *");
- printf("%-3d : %02x %s\n", 32, spd->ca_setup,
- " spd->ca_setup, * 32 Cmd + Addr signal input setup time *");
- printf("%-3d : %02x %s\n", 33, spd->ca_hold,
- " spd->ca_hold, * 33 Cmd and Addr signal input hold time *");
- printf("%-3d : %02x %s\n", 34, spd->data_setup,
- " spd->data_setup, * 34 Data signal input setup time *");
- printf("%-3d : %02x %s\n", 35, spd->data_hold,
- " spd->data_hold, * 35 Data signal input hold time *");
- printf("%-3d : %02x %s\n", 36, spd->twr,
- " spd->twr, * 36 Write Recovery time tWR *");
- printf("%-3d : %02x %s\n", 37, spd->twtr,
- " spd->twtr, * 37 Int write to read delay tWTR *");
- printf("%-3d : %02x %s\n", 38, spd->trtp,
- " spd->trtp, * 38 Int read to precharge delay tRTP *");
- printf("%-3d : %02x %s\n", 39, spd->mem_probe,
- " spd->mem_probe, * 39 Mem analysis probe characteristics *");
- printf("%-3d : %02x %s\n", 40, spd->trctrfc_ext,
- " spd->trctrfc_ext, * 40 Extensions to trc and trfc *");
- printf("%-3d : %02x %s\n", 41, spd->trc,
- " spd->trc, * 41 Min Active to Auto refresh time tRC *");
- printf("%-3d : %02x %s\n", 42, spd->trfc,
- " spd->trfc, * 42 Min Auto to Active period tRFC *");
- printf("%-3d : %02x %s\n", 43, spd->tckmax,
- " spd->tckmax, * 43 Max device cycle time tCKmax *");
- printf("%-3d : %02x %s\n", 44, spd->tdqsq,
- " spd->tdqsq, * 44 Max DQS to DQ skew *");
- printf("%-3d : %02x %s\n", 45, spd->tqhs,
- " spd->tqhs, * 45 Max Read DataHold skew tQHS *");
- printf("%-3d : %02x %s\n", 46, spd->pll_relock,
- " spd->pll_relock, * 46 PLL Relock time *");
- printf("%-3d : %02x %s\n", 47, spd->t_casemax,
- " spd->t_casemax, * 47 t_casemax *");
- printf("%-3d : %02x %s\n", 48, spd->psi_ta_dram,
- " spd->psi_ta_dram, * 48 Thermal Resistance of DRAM Package "
- "from Top (Case) to Ambient (Psi T-A DRAM) *");
- printf("%-3d : %02x %s\n", 49, spd->dt0_mode,
- " spd->dt0_mode, * 49 DRAM Case Temperature Rise from "
- "Ambient due to Activate-Precharge/Mode Bits "
- "(DT0/Mode Bits) *)");
- printf("%-3d : %02x %s\n", 50, spd->dt2n_dt2q,
- " spd->dt2n_dt2q, * 50 DRAM Case Temperature Rise from "
- "Ambient due to Precharge/Quiet Standby "
- "(DT2N/DT2Q) *");
- printf("%-3d : %02x %s\n", 51, spd->dt2p,
- " spd->dt2p, * 51 DRAM Case Temperature Rise from "
- "Ambient due to Precharge Power-Down (DT2P) *");
- printf("%-3d : %02x %s\n", 52, spd->dt3n,
- " spd->dt3n, * 52 DRAM Case Temperature Rise from "
- "Ambient due to Active Standby (DT3N) *");
- printf("%-3d : %02x %s\n", 53, spd->dt3pfast,
- " spd->dt3pfast, * 53 DRAM Case Temperature Rise from "
- "Ambient due to Active Power-Down with Fast PDN Exit "
- "(DT3Pfast) *");
- printf("%-3d : %02x %s\n", 54, spd->dt3pslow,
- " spd->dt3pslow, * 54 DRAM Case Temperature Rise from "
- "Ambient due to Active Power-Down with Slow PDN Exit "
- "(DT3Pslow) *");
- printf("%-3d : %02x %s\n", 55, spd->dt4r_dt4r4w,
- " spd->dt4r_dt4r4w, * 55 DRAM Case Temperature Rise from "
- "Ambient due to Page Open Burst Read/DT4R4W Mode Bit "
- "(DT4R/DT4R4W Mode Bit) *");
- printf("%-3d : %02x %s\n", 56, spd->dt5b,
- " spd->dt5b, * 56 DRAM Case Temperature Rise from "
- "Ambient due to Burst Refresh (DT5B) *");
- printf("%-3d : %02x %s\n", 57, spd->dt7,
- " spd->dt7, * 57 DRAM Case Temperature Rise from "
- "Ambient due to Bank Interleave Reads with "
- "Auto-Precharge (DT7) *");
- printf("%-3d : %02x %s\n", 58, spd->psi_ta_pll,
- " spd->psi_ta_pll, * 58 Thermal Resistance of PLL Package form"
- " Top (Case) to Ambient (Psi T-A PLL) *");
- printf("%-3d : %02x %s\n", 59, spd->psi_ta_reg,
- " spd->psi_ta_reg, * 59 Thermal Reisitance of Register Package"
- " from Top (Case) to Ambient (Psi T-A Register) *");
- printf("%-3d : %02x %s\n", 60, spd->dtpllactive,
- " spd->dtpllactive, * 60 PLL Case Temperature Rise from "
- "Ambient due to PLL Active (DT PLL Active) *");
- printf("%-3d : %02x %s\n", 61, spd->dtregact,
- " spd->dtregact, "
- "* 61 Register Case Temperature Rise from Ambient due to "
- "Register Active/Mode Bit (DT Register Active/Mode Bit) *");
- printf("%-3d : %02x %s\n", 62, spd->spd_rev,
- " spd->spd_rev, * 62 SPD Data Revision Code *");
- printf("%-3d : %02x %s\n", 63, spd->cksum,
- " spd->cksum, * 63 Checksum for bytes 0-62 *");
-
- printf("%-3d-%3d: ", 64, 71);
-
- for (i = 0; i < 8; i++)
- printf("%02x", spd->mid[i]);
-
- printf("* 64 Mfr's JEDEC ID code per JEP-108E *\n");
-
- printf("%-3d : %02x %s\n", 72, spd->mloc,
- " spd->mloc, * 72 Manufacturing Location *");
-
- printf("%-3d-%3d: >>", 73, 90);
- for (i = 0; i < 18; i++)
- printf("%c", spd->mpart[i]);
-
-
- printf("<<* 73 Manufacturer's Part Number *\n");
-
- printf("%-3d-%3d: %02x %02x %s\n", 91, 92, spd->rev[0], spd->rev[1],
- "* 91 Revision Code *");
- printf("%-3d-%3d: %02x %02x %s\n", 93, 94, spd->mdate[0], spd->mdate[1],
- "* 93 Manufacturing Date *");
- printf("%-3d-%3d: ", 95, 98);
-
- for (i = 0; i < 4; i++)
- printf("%02x", spd->sernum[i]);
-
- printf("* 95 Assembly Serial Number *\n");
-
- printf("%-3d-%3d: ", 99, 127);
- for (i = 0; i < 27; i++)
- printf("%02x", spd->mspec[i]);
-
-
- printf("* 99 Manufacturer Specific Data *\n");
-}
-#endif
-
-#ifdef CONFIG_FSL_DDR3
-void ddr3_spd_dump(const ddr3_spd_eeprom_t *spd)
-{
- unsigned int i;
-
- /* General Section: Bytes 0-59 */
-
-#define PRINT_NXS(x, y, z...) printf("%-3d : %02x " z "\n", x, (u8)y);
-#define PRINT_NNXXS(n0, n1, x0, x1, s) \
- printf("%-3d-%3d: %02x %02x " s "\n", n0, n1, x0, x1);
-
- PRINT_NXS(0, spd->info_size_crc,
- "info_size_crc bytes written into serial memory, "
- "CRC coverage");
- PRINT_NXS(1, spd->spd_rev,
- "spd_rev SPD Revision");
- PRINT_NXS(2, spd->mem_type,
- "mem_type Key Byte / DRAM Device Type");
- PRINT_NXS(3, spd->module_type,
- "module_type Key Byte / Module Type");
- PRINT_NXS(4, spd->density_banks,
- "density_banks SDRAM Density and Banks");
- PRINT_NXS(5, spd->addressing,
- "addressing SDRAM Addressing");
- PRINT_NXS(6, spd->module_vdd,
- "module_vdd Module Nominal Voltage, VDD");
- PRINT_NXS(7, spd->organization,
- "organization Module Organization");
- PRINT_NXS(8, spd->bus_width,
- "bus_width Module Memory Bus Width");
- PRINT_NXS(9, spd->ftb_div,
- "ftb_div Fine Timebase (FTB) Dividend / Divisor");
- PRINT_NXS(10, spd->mtb_dividend,
- "mtb_dividend Medium Timebase (MTB) Dividend");
- PRINT_NXS(11, spd->mtb_divisor,
- "mtb_divisor Medium Timebase (MTB) Divisor");
- PRINT_NXS(12, spd->tck_min,
- "tck_min SDRAM Minimum Cycle Time");
- PRINT_NXS(13, spd->res_13,
- "res_13 Reserved");
- PRINT_NXS(14, spd->caslat_lsb,
- "caslat_lsb CAS Latencies Supported, LSB");
- PRINT_NXS(15, spd->caslat_msb,
- "caslat_msb CAS Latencies Supported, MSB");
- PRINT_NXS(16, spd->taa_min,
- "taa_min Min CAS Latency Time");
- PRINT_NXS(17, spd->twr_min,
- "twr_min Min Write REcovery Time");
- PRINT_NXS(18, spd->trcd_min,
- "trcd_min Min RAS# to CAS# Delay Time");
- PRINT_NXS(19, spd->trrd_min,
- "trrd_min Min Row Active to Row Active Delay Time");
- PRINT_NXS(20, spd->trp_min,
- "trp_min Min Row Precharge Delay Time");
- PRINT_NXS(21, spd->tras_trc_ext,
- "tras_trc_ext Upper Nibbles for tRAS and tRC");
- PRINT_NXS(22, spd->tras_min_lsb,
- "tras_min_lsb Min Active to Precharge Delay Time, LSB");
- PRINT_NXS(23, spd->trc_min_lsb,
- "trc_min_lsb Min Active to Active/Refresh Delay Time, LSB");
- PRINT_NXS(24, spd->trfc_min_lsb,
- "trfc_min_lsb Min Refresh Recovery Delay Time LSB");
- PRINT_NXS(25, spd->trfc_min_msb,
- "trfc_min_msb Min Refresh Recovery Delay Time MSB");
- PRINT_NXS(26, spd->twtr_min,
- "twtr_min Min Internal Write to Read Command Delay Time");
- PRINT_NXS(27, spd->trtp_min,
- "trtp_min "
- "Min Internal Read to Precharge Command Delay Time");
- PRINT_NXS(28, spd->tfaw_msb,
- "tfaw_msb Upper Nibble for tFAW");
- PRINT_NXS(29, spd->tfaw_min,
- "tfaw_min Min Four Activate Window Delay Time");
- PRINT_NXS(30, spd->opt_features,
- "opt_features SDRAM Optional Features");
- PRINT_NXS(31, spd->therm_ref_opt,
- "therm_ref_opt SDRAM Thermal and Refresh Opts");
- PRINT_NXS(32, spd->therm_sensor,
- "therm_sensor SDRAM Thermal Sensor");
- PRINT_NXS(33, spd->device_type,
- "device_type SDRAM Device Type");
- PRINT_NXS(34, spd->fine_tck_min,
- "fine_tck_min Fine offset for tCKmin");
- PRINT_NXS(35, spd->fine_taa_min,
- "fine_taa_min Fine offset for tAAmin");
- PRINT_NXS(36, spd->fine_trcd_min,
- "fine_trcd_min Fine offset for tRCDmin");
- PRINT_NXS(37, spd->fine_trp_min,
- "fine_trp_min Fine offset for tRPmin");
- PRINT_NXS(38, spd->fine_trc_min,
- "fine_trc_min Fine offset for tRCmin");
-
- printf("%-3d-%3d: ", 39, 59); /* Reserved, General Section */
-
- for (i = 39; i <= 59; i++)
- printf("%02x ", spd->res_39_59[i - 39]);
-
- puts("\n");
-
- switch (spd->module_type) {
- case 0x02: /* UDIMM */
- case 0x03: /* SO-DIMM */
- case 0x04: /* Micro-DIMM */
- case 0x06: /* Mini-UDIMM */
- PRINT_NXS(60, spd->mod_section.unbuffered.mod_height,
- "mod_height (Unbuffered) Module Nominal Height");
- PRINT_NXS(61, spd->mod_section.unbuffered.mod_thickness,
- "mod_thickness (Unbuffered) Module Maximum Thickness");
- PRINT_NXS(62, spd->mod_section.unbuffered.ref_raw_card,
- "ref_raw_card (Unbuffered) Reference Raw Card Used");
- PRINT_NXS(63, spd->mod_section.unbuffered.addr_mapping,
- "addr_mapping (Unbuffered) Address mapping from "
- "Edge Connector to DRAM");
- break;
- case 0x01: /* RDIMM */
- case 0x05: /* Mini-RDIMM */
- PRINT_NXS(60, spd->mod_section.registered.mod_height,
- "mod_height (Registered) Module Nominal Height");
- PRINT_NXS(61, spd->mod_section.registered.mod_thickness,
- "mod_thickness (Registered) Module Maximum Thickness");
- PRINT_NXS(62, spd->mod_section.registered.ref_raw_card,
- "ref_raw_card (Registered) Reference Raw Card Used");
- PRINT_NXS(63, spd->mod_section.registered.modu_attr,
- "modu_attr (Registered) DIMM Module Attributes");
- PRINT_NXS(64, spd->mod_section.registered.thermal,
- "thermal (Registered) Thermal Heat "
- "Spreader Solution");
- PRINT_NXS(65, spd->mod_section.registered.reg_id_lo,
- "reg_id_lo (Registered) Register Manufacturer ID "
- "Code, LSB");
- PRINT_NXS(66, spd->mod_section.registered.reg_id_hi,
- "reg_id_hi (Registered) Register Manufacturer ID "
- "Code, MSB");
- PRINT_NXS(67, spd->mod_section.registered.reg_rev,
- "reg_rev (Registered) Register "
- "Revision Number");
- PRINT_NXS(68, spd->mod_section.registered.reg_type,
- "reg_type (Registered) Register Type");
- for (i = 69; i <= 76; i++) {
- printf("%-3d : %02x rcw[%d]\n", i,
- spd->mod_section.registered.rcw[i-69], i-69);
- }
- break;
- default:
- /* Module-specific Section, Unsupported Module Type */
- printf("%-3d-%3d: ", 60, 116);
-
- for (i = 60; i <= 116; i++)
- printf("%02x", spd->mod_section.uc[i - 60]);
-
- break;
- }
-
- /* Unique Module ID: Bytes 117-125 */
- PRINT_NXS(117, spd->mmid_lsb, "Module MfgID Code LSB - JEP-106");
- PRINT_NXS(118, spd->mmid_msb, "Module MfgID Code MSB - JEP-106");
- PRINT_NXS(119, spd->mloc, "Mfg Location");
- PRINT_NNXXS(120, 121, spd->mdate[0], spd->mdate[1], "Mfg Date");
-
- printf("%-3d-%3d: ", 122, 125);
-
- for (i = 122; i <= 125; i++)
- printf("%02x ", spd->sernum[i - 122]);
- printf(" Module Serial Number\n");
-
- /* CRC: Bytes 126-127 */
- PRINT_NNXXS(126, 127, spd->crc[0], spd->crc[1], " SPD CRC");
-
- /* Other Manufacturer Fields and User Space: Bytes 128-255 */
- printf("%-3d-%3d: ", 128, 145);
- for (i = 128; i <= 145; i++)
- printf("%02x ", spd->mpart[i - 128]);
- printf(" Mfg's Module Part Number\n");
-
- PRINT_NNXXS(146, 147, spd->mrev[0], spd->mrev[1],
- "Module Revision code");
-
- PRINT_NXS(148, spd->dmid_lsb, "DRAM MfgID Code LSB - JEP-106");
- PRINT_NXS(149, spd->dmid_msb, "DRAM MfgID Code MSB - JEP-106");
-
- printf("%-3d-%3d: ", 150, 175);
- for (i = 150; i <= 175; i++)
- printf("%02x ", spd->msd[i - 150]);
- printf(" Mfg's Specific Data\n");
-
- printf("%-3d-%3d: ", 176, 255);
- for (i = 176; i <= 255; i++)
- printf("%02x", spd->cust[i - 176]);
- printf(" Mfg's Specific Data\n");
-
-}
-#endif
-
-static inline void generic_spd_dump(const generic_spd_eeprom_t *spd)
-{
-#if defined(CONFIG_FSL_DDR1)
- ddr1_spd_dump(spd);
-#elif defined(CONFIG_FSL_DDR2)
- ddr2_spd_dump(spd);
-#elif defined(CONFIG_FSL_DDR3)
- ddr3_spd_dump(spd);
-#endif
-}
-
-static void fsl_ddr_printinfo(const fsl_ddr_info_t *pinfo,
- unsigned int ctrl_mask,
- unsigned int dimm_mask,
- unsigned int do_mask)
-{
- unsigned int i, j, retval;
-
- /* STEP 1: DIMM SPD data */
- if (do_mask & STEP_GET_SPD) {
- for (i = 0; i < CONFIG_NUM_DDR_CONTROLLERS; i++) {
- if (!(ctrl_mask & (1 << i)))
- continue;
-
- for (j = 0; j < CONFIG_DIMM_SLOTS_PER_CTLR; j++) {
- if (!(dimm_mask & (1 << j)))
- continue;
-
- printf("SPD info: Controller=%u "
- "DIMM=%u\n", i, j);
- generic_spd_dump(
- &(pinfo->spd_installed_dimms[i][j]));
- printf("\n");
- }
- printf("\n");
- }
- printf("\n");
- }
-
- /* STEP 2: DIMM Parameters */
- if (do_mask & STEP_COMPUTE_DIMM_PARMS) {
- for (i = 0; i < CONFIG_NUM_DDR_CONTROLLERS; i++) {
- if (!(ctrl_mask & (1 << i)))
- continue;
- for (j = 0; j < CONFIG_DIMM_SLOTS_PER_CTLR; j++) {
- if (!(dimm_mask & (1 << j)))
- continue;
- printf("DIMM parameters: Controller=%u "
- "DIMM=%u\n", i, j);
- print_dimm_parameters(
- &(pinfo->dimm_params[i][j]));
- printf("\n");
- }
- printf("\n");
- }
- printf("\n");
- }
-
- /* STEP 3: Common Parameters */
- if (do_mask & STEP_COMPUTE_COMMON_PARMS) {
- for (i = 0; i < CONFIG_NUM_DDR_CONTROLLERS; i++) {
- if (!(ctrl_mask & (1 << i)))
- continue;
- printf("\"lowest common\" DIMM parameters: "
- "Controller=%u\n", i);
- print_lowest_common_dimm_parameters(
- &pinfo->common_timing_params[i]);
- printf("\n");
- }
- printf("\n");
- }
-
- /* STEP 4: User Configuration Options */
- if (do_mask & STEP_GATHER_OPTS) {
- for (i = 0; i < CONFIG_NUM_DDR_CONTROLLERS; i++) {
- if (!(ctrl_mask & (1 << i)))
- continue;
- printf("User Config Options: Controller=%u\n", i);
- print_memctl_options(&pinfo->memctl_opts[i]);
- printf("\n");
- }
- printf("\n");
- }
-
- /* STEP 5: Address assignment */
- if (do_mask & STEP_ASSIGN_ADDRESSES) {
- for (i = 0; i < CONFIG_NUM_DDR_CONTROLLERS; i++) {
- if (!(ctrl_mask & (1 << i)))
- continue;
- for (j = 0; j < CONFIG_DIMM_SLOTS_PER_CTLR; j++) {
- printf("Address Assignment: Controller=%u "
- "DIMM=%u\n", i, j);
- printf("Don't have this functionality yet\n");
- }
- printf("\n");
- }
- printf("\n");
- }
-
- /* STEP 6: computed controller register values */
- if (do_mask & STEP_COMPUTE_REGS) {
- for (i = 0; i < CONFIG_NUM_DDR_CONTROLLERS; i++) {
- if (!(ctrl_mask & (1 << i)))
- continue;
- printf("Computed Register Values: Controller=%u\n", i);
- print_fsl_memctl_config_regs(
- &pinfo->fsl_ddr_config_reg[i]);
- retval = check_fsl_memctl_config_regs(
- &pinfo->fsl_ddr_config_reg[i]);
- if (retval) {
- printf("check_fsl_memctl_config_regs "
- "result = %u\n", retval);
- }
- printf("\n");
- }
- printf("\n");
- }
-}
-
-struct data_strings {
- const char *data_name;
- unsigned int step_mask;
- unsigned int dimm_number_required;
-};
-
-#define DATA_OPTIONS(name, step, dimm) {#name, step, dimm}
-
-static unsigned int fsl_ddr_parse_interactive_cmd(
- char **argv,
- int argc,
- unsigned int *pstep_mask,
- unsigned int *pctlr_mask,
- unsigned int *pdimm_mask,
- unsigned int *pdimm_number_required
- ) {
-
- static const struct data_strings options[] = {
- DATA_OPTIONS(spd, STEP_GET_SPD, 1),
- DATA_OPTIONS(dimmparms, STEP_COMPUTE_DIMM_PARMS, 1),
- DATA_OPTIONS(commonparms, STEP_COMPUTE_COMMON_PARMS, 0),
- DATA_OPTIONS(opts, STEP_GATHER_OPTS, 0),
- DATA_OPTIONS(addresses, STEP_ASSIGN_ADDRESSES, 0),
- DATA_OPTIONS(regs, STEP_COMPUTE_REGS, 0),
- };
- static const unsigned int n_opts = ARRAY_SIZE(options);
-
- unsigned int i, j;
- unsigned int error = 0;
-
- for (i = 1; i < argc; i++) {
- unsigned int matched = 0;
-
- for (j = 0; j < n_opts; j++) {
- if (strcmp(options[j].data_name, argv[i]) != 0)
- continue;
- *pstep_mask |= options[j].step_mask;
- *pdimm_number_required =
- options[j].dimm_number_required;
- matched = 1;
- break;
- }
-
- if (matched)
- continue;
-
- if (argv[i][0] == 'c') {
- char c = argv[i][1];
- if (isdigit(c))
- *pctlr_mask |= 1 << (c - '0');
- continue;
- }
-
- if (argv[i][0] == 'd') {
- char c = argv[i][1];
- if (isdigit(c))
- *pdimm_mask |= 1 << (c - '0');
- continue;
- }
-
- printf("unknown arg %s\n", argv[i]);
- *pstep_mask = 0;
- error = 1;
- break;
- }
-
- return error;
-}
-
-int fsl_ddr_interactive_env_var_exists(void)
-{
- char buffer[CONFIG_SYS_CBSIZE];
-
- if (getenv_f("ddr_interactive", buffer, CONFIG_SYS_CBSIZE) >= 0)
- return 1;
-
- return 0;
-}
-
-unsigned long long fsl_ddr_interactive(fsl_ddr_info_t *pinfo, int var_is_set)
-{
- unsigned long long ddrsize;
- const char *prompt = "FSL DDR>";
- char buffer[CONFIG_SYS_CBSIZE];
- char buffer2[CONFIG_SYS_CBSIZE];
- char *p = NULL;
- char *argv[CONFIG_SYS_MAXARGS + 1]; /* NULL terminated */
- int argc;
- unsigned int next_step = STEP_GET_SPD;
- const char *usage = {
- "commands:\n"
- "print print SPD and intermediate computed data\n"
- "reset reboot machine\n"
- "recompute reload SPD and options to default and recompute regs\n"
- "edit modify spd, parameter, or option\n"
- "compute recompute registers from current next_step to end\n"
- "copy copy parameters\n"
- "next_step shows current next_step\n"
- "help this message\n"
- "go program the memory controller and continue with u-boot\n"
- };
-
- if (var_is_set) {
- if (getenv_f("ddr_interactive", buffer2, CONFIG_SYS_CBSIZE) > 0) {
- p = buffer2;
- } else {
- var_is_set = 0;
- }
- }
-
- /*
- * The strategy for next_step is that it points to the next
- * step in the computation process that needs to be done.
- */
- while (1) {
- if (var_is_set) {
- char *pend = strchr(p, ';');
- if (pend) {
- /* found command separator, copy sub-command */
- *pend = '\0';
- strcpy(buffer, p);
- p = pend + 1;
- } else {
- /* separator not found, copy whole string */
- strcpy(buffer, p);
- p = NULL;
- var_is_set = 0;
- }
- } else {
- /*
- * No need to worry for buffer overflow here in
- * this function; readline() maxes out at CFG_CBSIZE
- */
- readline_into_buffer(prompt, buffer, 0);
- }
- argc = parse_line(buffer, argv);
- if (argc == 0)
- continue;
-
-
- if (strcmp(argv[0], "help") == 0) {
- puts(usage);
- continue;
- }
-
- if (strcmp(argv[0], "next_step") == 0) {
- printf("next_step = 0x%02X (%s)\n",
- next_step,
- step_to_string(next_step));
- continue;
- }
-
- if (strcmp(argv[0], "copy") == 0) {
- unsigned int error = 0;
- unsigned int step_mask = 0;
- unsigned int src_ctlr_mask = 0;
- unsigned int src_dimm_mask = 0;
- unsigned int dimm_number_required = 0;
- unsigned int src_ctlr_num = 0;
- unsigned int src_dimm_num = 0;
- unsigned int dst_ctlr_num = -1;
- unsigned int dst_dimm_num = -1;
- unsigned int i, num_dest_parms;
-
- if (argc == 1) {
- printf("copy <src c#> <src d#> <spd|dimmparms|commonparms|opts|addresses|regs> <dst c#> <dst d#>\n");
- continue;
- }
-
- error = fsl_ddr_parse_interactive_cmd(
- argv, argc,
- &step_mask,
- &src_ctlr_mask,
- &src_dimm_mask,
- &dimm_number_required
- );
-
- /* XXX: only dimm_number_required and step_mask will
- be used by this function. Parse the controller and
- DIMM number separately because it is easier. */
-
- if (error)
- continue;
-
- /* parse source destination controller / DIMM */
-
- num_dest_parms = dimm_number_required ? 2 : 1;
-
- for (i = 0; i < argc; i++) {
- if (argv[i][0] == 'c') {
- char c = argv[i][1];
- if (isdigit(c)) {
- src_ctlr_num = (c - '0');
- break;
- }
- }
- }
-
- for (i = 0; i < argc; i++) {
- if (argv[i][0] == 'd') {
- char c = argv[i][1];
- if (isdigit(c)) {
- src_dimm_num = (c - '0');
- break;
- }
- }
- }
-
- /* parse destination controller / DIMM */
-
- for (i = argc - 1; i >= argc - num_dest_parms; i--) {
- if (argv[i][0] == 'c') {
- char c = argv[i][1];
- if (isdigit(c)) {
- dst_ctlr_num = (c - '0');
- break;
- }
- }
- }
-
- for (i = argc - 1; i >= argc - num_dest_parms; i--) {
- if (argv[i][0] == 'd') {
- char c = argv[i][1];
- if (isdigit(c)) {
- dst_dimm_num = (c - '0');
- break;
- }
- }
- }
-
- /* TODO: validate inputs */
-
- debug("src_ctlr_num = %u, src_dimm_num = %u, dst_ctlr_num = %u, dst_dimm_num = %u, step_mask = %x\n",
- src_ctlr_num, src_dimm_num, dst_ctlr_num, dst_dimm_num, step_mask);
-
-
- switch (step_mask) {
-
- case STEP_GET_SPD:
- memcpy(&(pinfo->spd_installed_dimms[dst_ctlr_num][dst_dimm_num]),
- &(pinfo->spd_installed_dimms[src_ctlr_num][src_dimm_num]),
- sizeof(pinfo->spd_installed_dimms[0][0]));
- break;
-
- case STEP_COMPUTE_DIMM_PARMS:
- memcpy(&(pinfo->dimm_params[dst_ctlr_num][dst_dimm_num]),
- &(pinfo->dimm_params[src_ctlr_num][src_dimm_num]),
- sizeof(pinfo->dimm_params[0][0]));
- break;
-
- case STEP_COMPUTE_COMMON_PARMS:
- memcpy(&(pinfo->common_timing_params[dst_ctlr_num]),
- &(pinfo->common_timing_params[src_ctlr_num]),
- sizeof(pinfo->common_timing_params[0]));
- break;
-
- case STEP_GATHER_OPTS:
- memcpy(&(pinfo->memctl_opts[dst_ctlr_num]),
- &(pinfo->memctl_opts[src_ctlr_num]),
- sizeof(pinfo->memctl_opts[0]));
- break;
-
- /* someday be able to have addresses to copy addresses... */
-
- case STEP_COMPUTE_REGS:
- memcpy(&(pinfo->fsl_ddr_config_reg[dst_ctlr_num]),
- &(pinfo->fsl_ddr_config_reg[src_ctlr_num]),
- sizeof(pinfo->memctl_opts[0]));
- break;
-
- default:
- printf("unexpected step_mask value\n");
- }
-
- continue;
-
- }
-
- if (strcmp(argv[0], "edit") == 0) {
- unsigned int error = 0;
- unsigned int step_mask = 0;
- unsigned int ctlr_mask = 0;
- unsigned int dimm_mask = 0;
- char *p_element = NULL;
- char *p_value = NULL;
- unsigned int dimm_number_required = 0;
- unsigned int ctrl_num;
- unsigned int dimm_num;
-
- if (argc == 1) {
- /* Only the element and value must be last */
- printf("edit <c#> <d#> "
- "<spd|dimmparms|commonparms|opts|"
- "addresses|regs> <element> <value>\n");
- printf("for spd, specify byte number for "
- "element\n");
- continue;
- }
-
- error = fsl_ddr_parse_interactive_cmd(
- argv, argc - 2,
- &step_mask,
- &ctlr_mask,
- &dimm_mask,
- &dimm_number_required
- );
-
- if (error)
- continue;
-
-
- /* Check arguments */
-
- /* ERROR: If no steps were found */
- if (step_mask == 0) {
- printf("Error: No valid steps were specified "
- "in argument.\n");
- continue;
- }
-
- /* ERROR: If multiple steps were found */
- if (step_mask & (step_mask - 1)) {
- printf("Error: Multiple steps specified in "
- "argument.\n");
- continue;
- }
-
- /* ERROR: Controller not specified */
- if (ctlr_mask == 0) {
- printf("Error: controller number not "
- "specified or no element and "
- "value specified\n");
- continue;
- }
-
- if (ctlr_mask & (ctlr_mask - 1)) {
- printf("Error: multiple controllers "
- "specified, %X\n", ctlr_mask);
- continue;
- }
-
- /* ERROR: DIMM number not specified */
- if (dimm_number_required && dimm_mask == 0) {
- printf("Error: DIMM number number not "
- "specified or no element and "
- "value specified\n");
- continue;
- }
-
- if (dimm_mask & (dimm_mask - 1)) {
- printf("Error: multipled DIMMs specified\n");
- continue;
- }
-
- p_element = argv[argc - 2];
- p_value = argv[argc - 1];
-
- ctrl_num = __ilog2(ctlr_mask);
- dimm_num = __ilog2(dimm_mask);
-
- switch (step_mask) {
- case STEP_GET_SPD:
- {
- unsigned int element_num;
- unsigned int value;
-
- element_num = simple_strtoul(p_element,
- NULL, 0);
- value = simple_strtoul(p_value,
- NULL, 0);
- fsl_ddr_spd_edit(pinfo,
- ctrl_num,
- dimm_num,
- element_num,
- value);
- next_step = STEP_COMPUTE_DIMM_PARMS;
- }
- break;
-
- case STEP_COMPUTE_DIMM_PARMS:
- fsl_ddr_dimm_parameters_edit(
- pinfo, ctrl_num, dimm_num,
- p_element, p_value);
- next_step = STEP_COMPUTE_COMMON_PARMS;
- break;
-
- case STEP_COMPUTE_COMMON_PARMS:
- lowest_common_dimm_parameters_edit(pinfo,
- ctrl_num, p_element, p_value);
- next_step = STEP_GATHER_OPTS;
- break;
-
- case STEP_GATHER_OPTS:
- fsl_ddr_options_edit(pinfo, ctrl_num,
- p_element, p_value);
- next_step = STEP_ASSIGN_ADDRESSES;
- break;
-
- case STEP_ASSIGN_ADDRESSES:
- printf("editing of address assignment "
- "not yet implemented\n");
- break;
-
- case STEP_COMPUTE_REGS:
- {
- fsl_ddr_regs_edit(pinfo,
- ctrl_num,
- p_element,
- p_value);
- next_step = STEP_PROGRAM_REGS;
- }
- break;
-
- default:
- printf("programming error\n");
- while (1)
- ;
- break;
- }
- continue;
- }
-
- if (strcmp(argv[0], "reset") == 0) {
- /*
- * Reboot machine.
- * Args don't seem to matter because this
- * doesn't return
- */
- do_reset(NULL, 0, 0, NULL);
- printf("Reset didn't work\n");
- }
-
- if (strcmp(argv[0], "recompute") == 0) {
- /*
- * Recalculate everything, starting with
- * loading SPD EEPROM from DIMMs
- */
- next_step = STEP_GET_SPD;
- ddrsize = fsl_ddr_compute(pinfo, next_step, 0);
- continue;
- }
-
- if (strcmp(argv[0], "compute") == 0) {
- /*
- * Compute rest of steps starting at
- * the current next_step/
- */
- ddrsize = fsl_ddr_compute(pinfo, next_step, 0);
- continue;
- }
-
- if (strcmp(argv[0], "print") == 0) {
- unsigned int error = 0;
- unsigned int step_mask = 0;
- unsigned int ctlr_mask = 0;
- unsigned int dimm_mask = 0;
- unsigned int dimm_number_required = 0;
-
- if (argc == 1) {
- printf("print [c<n>] [d<n>] [spd] [dimmparms] "
- "[commonparms] [opts] [addresses] [regs]\n");
- continue;
- }
-
- error = fsl_ddr_parse_interactive_cmd(
- argv, argc,
- &step_mask,
- &ctlr_mask,
- &dimm_mask,
- &dimm_number_required
- );
-
- if (error)
- continue;
-
- /* If no particular controller was found, print all */
- if (ctlr_mask == 0)
- ctlr_mask = 0xFF;
-
- /* If no particular dimm was found, print all dimms. */
- if (dimm_mask == 0)
- dimm_mask = 0xFF;
-
- /* If no steps were found, print all steps. */
- if (step_mask == 0)
- step_mask = STEP_ALL;
-
- fsl_ddr_printinfo(pinfo, ctlr_mask,
- dimm_mask, step_mask);
- continue;
- }
-
- if (strcmp(argv[0], "go") == 0) {
- if (next_step)
- ddrsize = fsl_ddr_compute(pinfo, next_step, 0);
- break;
- }
-
- printf("unknown command %s\n", argv[0]);
- }
-
- debug("end of memory = %llu\n", (u64)ddrsize);
-
- return ddrsize;
-}
diff --git a/arch/powerpc/cpu/mpc8xxx/ddr/lc_common_dimm_params.c b/arch/powerpc/cpu/mpc8xxx/ddr/lc_common_dimm_params.c
deleted file mode 100644
index 332fe25c48..0000000000
--- a/arch/powerpc/cpu/mpc8xxx/ddr/lc_common_dimm_params.c
+++ /dev/null
@@ -1,526 +0,0 @@
-/*
- * Copyright 2008-2012 Freescale Semiconductor, Inc.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * Version 2 as published by the Free Software Foundation.
- */
-
-#include <common.h>
-#include <asm/fsl_ddr_sdram.h>
-
-#include "ddr.h"
-
-#if defined(CONFIG_FSL_DDR3)
-static unsigned int
-compute_cas_latency_ddr3(const dimm_params_t *dimm_params,
- common_timing_params_t *outpdimm,
- unsigned int number_of_dimms)
-{
- unsigned int i;
- unsigned int taamin_ps = 0;
- unsigned int tckmin_x_ps = 0;
- unsigned int common_caslat;
- unsigned int caslat_actual;
- unsigned int retry = 16;
- unsigned int tmp;
- const unsigned int mclk_ps = get_memory_clk_period_ps();
-
- /* compute the common CAS latency supported between slots */
- tmp = dimm_params[0].caslat_x;
- for (i = 1; i < number_of_dimms; i++) {
- if (dimm_params[i].n_ranks)
- tmp &= dimm_params[i].caslat_x;
- }
- common_caslat = tmp;
-
- /* compute the max tAAmin tCKmin between slots */
- for (i = 0; i < number_of_dimms; i++) {
- taamin_ps = max(taamin_ps, dimm_params[i].taa_ps);
- tckmin_x_ps = max(tckmin_x_ps, dimm_params[i].tckmin_x_ps);
- }
- /* validate if the memory clk is in the range of dimms */
- if (mclk_ps < tckmin_x_ps) {
- printf("DDR clock (MCLK cycle %u ps) is faster than "
- "the slowest DIMM(s) (tCKmin %u ps) can support.\n",
- mclk_ps, tckmin_x_ps);
- }
- /* determine the acutal cas latency */
- caslat_actual = (taamin_ps + mclk_ps - 1) / mclk_ps;
- /* check if the dimms support the CAS latency */
- while (!(common_caslat & (1 << caslat_actual)) && retry > 0) {
- caslat_actual++;
- retry--;
- }
- /* once the caculation of caslat_actual is completed
- * we must verify that this CAS latency value does not
- * exceed tAAmax, which is 20 ns for all DDR3 speed grades
- */
- if (caslat_actual * mclk_ps > 20000) {
- printf("The choosen cas latency %d is too large\n",
- caslat_actual);
- }
- outpdimm->lowest_common_SPD_caslat = caslat_actual;
-
- return 0;
-}
-#endif
-
-/*
- * compute_lowest_common_dimm_parameters()
- *
- * Determine the worst-case DIMM timing parameters from the set of DIMMs
- * whose parameters have been computed into the array pointed to
- * by dimm_params.
- */
-unsigned int
-compute_lowest_common_dimm_parameters(const dimm_params_t *dimm_params,
- common_timing_params_t *outpdimm,
- const unsigned int number_of_dimms)
-{
- unsigned int i, j;
-
- unsigned int tckmin_x_ps = 0;
- unsigned int tckmax_ps = 0xFFFFFFFF;
- unsigned int tckmax_max_ps = 0;
- unsigned int trcd_ps = 0;
- unsigned int trp_ps = 0;
- unsigned int tras_ps = 0;
- unsigned int twr_ps = 0;
- unsigned int twtr_ps = 0;
- unsigned int trfc_ps = 0;
- unsigned int trrd_ps = 0;
- unsigned int trc_ps = 0;
- unsigned int refresh_rate_ps = 0;
- unsigned int extended_op_srt = 1;
- unsigned int tis_ps = 0;
- unsigned int tih_ps = 0;
- unsigned int tds_ps = 0;
- unsigned int tdh_ps = 0;
- unsigned int trtp_ps = 0;
- unsigned int tdqsq_max_ps = 0;
- unsigned int tqhs_ps = 0;
-
- unsigned int temp1, temp2;
- unsigned int additive_latency = 0;
-#if !defined(CONFIG_FSL_DDR3)
- const unsigned int mclk_ps = get_memory_clk_period_ps();
- unsigned int lowest_good_caslat;
- unsigned int not_ok;
-
- debug("using mclk_ps = %u\n", mclk_ps);
-#endif
-
- temp1 = 0;
- for (i = 0; i < number_of_dimms; i++) {
- /*
- * If there are no ranks on this DIMM,
- * it probably doesn't exist, so skip it.
- */
- if (dimm_params[i].n_ranks == 0) {
- temp1++;
- continue;
- }
- if (dimm_params[i].n_ranks == 4 && i != 0) {
- printf("Found Quad-rank DIMM in wrong bank, ignored."
- " Software may not run as expected.\n");
- temp1++;
- continue;
- }
-
- /*
- * check if quad-rank DIMM is plugged if
- * CONFIG_CHIP_SELECT_QUAD_CAPABLE is not defined
- * Only the board with proper design is capable
- */
-#ifndef CONFIG_FSL_DDR_FIRST_SLOT_QUAD_CAPABLE
- if (dimm_params[i].n_ranks == 4 && \
- CONFIG_CHIP_SELECTS_PER_CTRL/CONFIG_DIMM_SLOTS_PER_CTLR < 4) {
- printf("Found Quad-rank DIMM, not able to support.");
- temp1++;
- continue;
- }
-#endif
- /*
- * Find minimum tckmax_ps to find fastest slow speed,
- * i.e., this is the slowest the whole system can go.
- */
- tckmax_ps = min(tckmax_ps, dimm_params[i].tckmax_ps);
-
- /* Either find maximum value to determine slowest
- * speed, delay, time, period, etc */
- tckmin_x_ps = max(tckmin_x_ps, dimm_params[i].tckmin_x_ps);
- tckmax_max_ps = max(tckmax_max_ps, dimm_params[i].tckmax_ps);
- trcd_ps = max(trcd_ps, dimm_params[i].trcd_ps);
- trp_ps = max(trp_ps, dimm_params[i].trp_ps);
- tras_ps = max(tras_ps, dimm_params[i].tras_ps);
- twr_ps = max(twr_ps, dimm_params[i].twr_ps);
- twtr_ps = max(twtr_ps, dimm_params[i].twtr_ps);
- trfc_ps = max(trfc_ps, dimm_params[i].trfc_ps);
- trrd_ps = max(trrd_ps, dimm_params[i].trrd_ps);
- trc_ps = max(trc_ps, dimm_params[i].trc_ps);
- tis_ps = max(tis_ps, dimm_params[i].tis_ps);
- tih_ps = max(tih_ps, dimm_params[i].tih_ps);
- tds_ps = max(tds_ps, dimm_params[i].tds_ps);
- tdh_ps = max(tdh_ps, dimm_params[i].tdh_ps);
- trtp_ps = max(trtp_ps, dimm_params[i].trtp_ps);
- tqhs_ps = max(tqhs_ps, dimm_params[i].tqhs_ps);
- refresh_rate_ps = max(refresh_rate_ps,
- dimm_params[i].refresh_rate_ps);
- /* extended_op_srt is either 0 or 1, 0 having priority */
- extended_op_srt = min(extended_op_srt,
- dimm_params[i].extended_op_srt);
-
- /*
- * Find maximum tdqsq_max_ps to find slowest.
- *
- * FIXME: is finding the slowest value the correct
- * strategy for this parameter?
- */
- tdqsq_max_ps = max(tdqsq_max_ps, dimm_params[i].tdqsq_max_ps);
- }
-
- outpdimm->ndimms_present = number_of_dimms - temp1;
-
- if (temp1 == number_of_dimms) {
- debug("no dimms this memory controller\n");
- return 0;
- }
-
- outpdimm->tckmin_x_ps = tckmin_x_ps;
- outpdimm->tckmax_ps = tckmax_ps;
- outpdimm->tckmax_max_ps = tckmax_max_ps;
- outpdimm->trcd_ps = trcd_ps;
- outpdimm->trp_ps = trp_ps;
- outpdimm->tras_ps = tras_ps;
- outpdimm->twr_ps = twr_ps;
- outpdimm->twtr_ps = twtr_ps;
- outpdimm->trfc_ps = trfc_ps;
- outpdimm->trrd_ps = trrd_ps;
- outpdimm->trc_ps = trc_ps;
- outpdimm->refresh_rate_ps = refresh_rate_ps;
- outpdimm->extended_op_srt = extended_op_srt;
- outpdimm->tis_ps = tis_ps;
- outpdimm->tih_ps = tih_ps;
- outpdimm->tds_ps = tds_ps;
- outpdimm->tdh_ps = tdh_ps;
- outpdimm->trtp_ps = trtp_ps;
- outpdimm->tdqsq_max_ps = tdqsq_max_ps;
- outpdimm->tqhs_ps = tqhs_ps;
-
- /* Determine common burst length for all DIMMs. */
- temp1 = 0xff;
- for (i = 0; i < number_of_dimms; i++) {
- if (dimm_params[i].n_ranks) {
- temp1 &= dimm_params[i].burst_lengths_bitmask;
- }
- }
- outpdimm->all_dimms_burst_lengths_bitmask = temp1;
-
- /* Determine if all DIMMs registered buffered. */
- temp1 = temp2 = 0;
- for (i = 0; i < number_of_dimms; i++) {
- if (dimm_params[i].n_ranks) {
- if (dimm_params[i].registered_dimm) {
- temp1 = 1;
-#ifndef CONFIG_SPL_BUILD
- printf("Detected RDIMM %s\n",
- dimm_params[i].mpart);
-#endif
- } else {
- temp2 = 1;
-#ifndef CONFIG_SPL_BUILD
- printf("Detected UDIMM %s\n",
- dimm_params[i].mpart);
-#endif
- }
- }
- }
-
- outpdimm->all_dimms_registered = 0;
- outpdimm->all_dimms_unbuffered = 0;
- if (temp1 && !temp2) {
- outpdimm->all_dimms_registered = 1;
- } else if (!temp1 && temp2) {
- outpdimm->all_dimms_unbuffered = 1;
- } else {
- printf("ERROR: Mix of registered buffered and unbuffered "
- "DIMMs detected!\n");
- }
-
- temp1 = 0;
- if (outpdimm->all_dimms_registered)
- for (j = 0; j < 16; j++) {
- outpdimm->rcw[j] = dimm_params[0].rcw[j];
- for (i = 1; i < number_of_dimms; i++) {
- if (!dimm_params[i].n_ranks)
- continue;
- if (dimm_params[i].rcw[j] != dimm_params[0].rcw[j]) {
- temp1 = 1;
- break;
- }
- }
- }
-
- if (temp1 != 0)
- printf("ERROR: Mix different RDIMM detected!\n");
-
-#if defined(CONFIG_FSL_DDR3)
- if (compute_cas_latency_ddr3(dimm_params, outpdimm, number_of_dimms))
- return 1;
-#else
- /*
- * Compute a CAS latency suitable for all DIMMs
- *
- * Strategy for SPD-defined latencies: compute only
- * CAS latency defined by all DIMMs.
- */
-
- /*
- * Step 1: find CAS latency common to all DIMMs using bitwise
- * operation.
- */
- temp1 = 0xFF;
- for (i = 0; i < number_of_dimms; i++) {
- if (dimm_params[i].n_ranks) {
- temp2 = 0;
- temp2 |= 1 << dimm_params[i].caslat_x;
- temp2 |= 1 << dimm_params[i].caslat_x_minus_1;
- temp2 |= 1 << dimm_params[i].caslat_x_minus_2;
- /*
- * FIXME: If there was no entry for X-2 (X-1) in
- * the SPD, then caslat_x_minus_2
- * (caslat_x_minus_1) contains either 255 or
- * 0xFFFFFFFF because that's what the glorious
- * __ilog2 function returns for an input of 0.
- * On 32-bit PowerPC, left shift counts with bit
- * 26 set (that the value of 255 or 0xFFFFFFFF
- * will have), cause the destination register to
- * be 0. That is why this works.
- */
- temp1 &= temp2;
- }
- }
-
- /*
- * Step 2: check each common CAS latency against tCK of each
- * DIMM's SPD.
- */
- lowest_good_caslat = 0;
- temp2 = 0;
- while (temp1) {
- not_ok = 0;
- temp2 = __ilog2(temp1);
- debug("checking common caslat = %u\n", temp2);
-
- /* Check if this CAS latency will work on all DIMMs at tCK. */
- for (i = 0; i < number_of_dimms; i++) {
- if (!dimm_params[i].n_ranks) {
- continue;
- }
- if (dimm_params[i].caslat_x == temp2) {
- if (mclk_ps >= dimm_params[i].tckmin_x_ps) {
- debug("CL = %u ok on DIMM %u at tCK=%u"
- " ps with its tCKmin_X_ps of %u\n",
- temp2, i, mclk_ps,
- dimm_params[i].tckmin_x_ps);
- continue;
- } else {
- not_ok++;
- }
- }
-
- if (dimm_params[i].caslat_x_minus_1 == temp2) {
- unsigned int tckmin_x_minus_1_ps
- = dimm_params[i].tckmin_x_minus_1_ps;
- if (mclk_ps >= tckmin_x_minus_1_ps) {
- debug("CL = %u ok on DIMM %u at "
- "tCK=%u ps with its "
- "tckmin_x_minus_1_ps of %u\n",
- temp2, i, mclk_ps,
- tckmin_x_minus_1_ps);
- continue;
- } else {
- not_ok++;
- }
- }
-
- if (dimm_params[i].caslat_x_minus_2 == temp2) {
- unsigned int tckmin_x_minus_2_ps
- = dimm_params[i].tckmin_x_minus_2_ps;
- if (mclk_ps >= tckmin_x_minus_2_ps) {
- debug("CL = %u ok on DIMM %u at "
- "tCK=%u ps with its "
- "tckmin_x_minus_2_ps of %u\n",
- temp2, i, mclk_ps,
- tckmin_x_minus_2_ps);
- continue;
- } else {
- not_ok++;
- }
- }
- }
-
- if (!not_ok) {
- lowest_good_caslat = temp2;
- }
-
- temp1 &= ~(1 << temp2);
- }
-
- debug("lowest common SPD-defined CAS latency = %u\n",
- lowest_good_caslat);
- outpdimm->lowest_common_SPD_caslat = lowest_good_caslat;
-
-
- /*
- * Compute a common 'de-rated' CAS latency.
- *
- * The strategy here is to find the *highest* dereated cas latency
- * with the assumption that all of the DIMMs will support a dereated
- * CAS latency higher than or equal to their lowest dereated value.
- */
- temp1 = 0;
- for (i = 0; i < number_of_dimms; i++) {
- temp1 = max(temp1, dimm_params[i].caslat_lowest_derated);
- }
- outpdimm->highest_common_derated_caslat = temp1;
- debug("highest common dereated CAS latency = %u\n", temp1);
-#endif /* #if defined(CONFIG_FSL_DDR3) */
-
- /* Determine if all DIMMs ECC capable. */
- temp1 = 1;
- for (i = 0; i < number_of_dimms; i++) {
- if (dimm_params[i].n_ranks &&
- !(dimm_params[i].edc_config & EDC_ECC)) {
- temp1 = 0;
- break;
- }
- }
- if (temp1) {
- debug("all DIMMs ECC capable\n");
- } else {
- debug("Warning: not all DIMMs ECC capable, cant enable ECC\n");
- }
- outpdimm->all_dimms_ecc_capable = temp1;
-
-#ifndef CONFIG_FSL_DDR3
- /* FIXME: move to somewhere else to validate. */
- if (mclk_ps > tckmax_max_ps) {
- printf("Warning: some of the installed DIMMs "
- "can not operate this slowly.\n");
- return 1;
- }
-#endif
- /*
- * Compute additive latency.
- *
- * For DDR1, additive latency should be 0.
- *
- * For DDR2, with ODT enabled, use "a value" less than ACTTORW,
- * which comes from Trcd, and also note that:
- * add_lat + caslat must be >= 4
- *
- * For DDR3, we use the AL=0
- *
- * When to use additive latency for DDR2:
- *
- * I. Because you are using CL=3 and need to do ODT on writes and
- * want functionality.
- * 1. Are you going to use ODT? (Does your board not have
- * additional termination circuitry for DQ, DQS, DQS_,
- * DM, RDQS, RDQS_ for x4/x8 configs?)
- * 2. If so, is your lowest supported CL going to be 3?
- * 3. If so, then you must set AL=1 because
- *
- * WL >= 3 for ODT on writes
- * RL = AL + CL
- * WL = RL - 1
- * ->
- * WL = AL + CL - 1
- * AL + CL - 1 >= 3
- * AL + CL >= 4
- * QED
- *
- * RL >= 3 for ODT on reads
- * RL = AL + CL
- *
- * Since CL aren't usually less than 2, AL=0 is a minimum,
- * so the WL-derived AL should be the -- FIXME?
- *
- * II. Because you are using auto-precharge globally and want to
- * use additive latency (posted CAS) to get more bandwidth.
- * 1. Are you going to use auto-precharge mode globally?
- *
- * Use addtivie latency and compute AL to be 1 cycle less than
- * tRCD, i.e. the READ or WRITE command is in the cycle
- * immediately following the ACTIVATE command..
- *
- * III. Because you feel like it or want to do some sort of
- * degraded-performance experiment.
- * 1. Do you just want to use additive latency because you feel
- * like it?
- *
- * Validation: AL is less than tRCD, and within the other
- * read-to-precharge constraints.
- */
-
- additive_latency = 0;
-
-#if defined(CONFIG_FSL_DDR2)
- if (lowest_good_caslat < 4) {
- additive_latency = (picos_to_mclk(trcd_ps) > lowest_good_caslat)
- ? picos_to_mclk(trcd_ps) - lowest_good_caslat : 0;
- if (mclk_to_picos(additive_latency) > trcd_ps) {
- additive_latency = picos_to_mclk(trcd_ps);
- debug("setting additive_latency to %u because it was "
- " greater than tRCD_ps\n", additive_latency);
- }
- }
-
-#elif defined(CONFIG_FSL_DDR3)
- /*
- * The system will not use the global auto-precharge mode.
- * However, it uses the page mode, so we set AL=0
- */
- additive_latency = 0;
-#endif
-
- /*
- * Validate additive latency
- * FIXME: move to somewhere else to validate
- *
- * AL <= tRCD(min)
- */
- if (mclk_to_picos(additive_latency) > trcd_ps) {
- printf("Error: invalid additive latency exceeds tRCD(min).\n");
- return 1;
- }
-
- /*
- * RL = CL + AL; RL >= 3 for ODT_RD_CFG to be enabled
- * WL = RL - 1; WL >= 3 for ODT_WL_CFG to be enabled
- * ADD_LAT (the register) must be set to a value less
- * than ACTTORW if WL = 1, then AL must be set to 1
- * RD_TO_PRE (the register) must be set to a minimum
- * tRTP + AL if AL is nonzero
- */
-
- /*
- * Additive latency will be applied only if the memctl option to
- * use it.
- */
- outpdimm->additive_latency = additive_latency;
-
- debug("tCKmin_ps = %u\n", outpdimm->tckmin_x_ps);
- debug("trcd_ps = %u\n", outpdimm->trcd_ps);
- debug("trp_ps = %u\n", outpdimm->trp_ps);
- debug("tras_ps = %u\n", outpdimm->tras_ps);
- debug("twr_ps = %u\n", outpdimm->twr_ps);
- debug("twtr_ps = %u\n", outpdimm->twtr_ps);
- debug("trfc_ps = %u\n", outpdimm->trfc_ps);
- debug("trrd_ps = %u\n", outpdimm->trrd_ps);
- debug("trc_ps = %u\n", outpdimm->trc_ps);
-
- return 0;
-}
diff --git a/arch/powerpc/cpu/mpc8xxx/ddr/main.c b/arch/powerpc/cpu/mpc8xxx/ddr/main.c
deleted file mode 100644
index 34d8bc3ac0..0000000000
--- a/arch/powerpc/cpu/mpc8xxx/ddr/main.c
+++ /dev/null
@@ -1,718 +0,0 @@
-/*
- * Copyright 2008-2012 Freescale Semiconductor, Inc.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * Version 2 as published by the Free Software Foundation.
- */
-
-/*
- * Generic driver for Freescale DDR/DDR2/DDR3 memory controller.
- * Based on code from spd_sdram.c
- * Author: James Yang [at freescale.com]
- */
-
-#include <common.h>
-#include <i2c.h>
-#include <asm/fsl_ddr_sdram.h>
-#include <asm/fsl_law.h>
-
-#include "ddr.h"
-
-void fsl_ddr_set_lawbar(
- const common_timing_params_t *memctl_common_params,
- unsigned int memctl_interleaved,
- unsigned int ctrl_num);
-void fsl_ddr_set_intl3r(const unsigned int granule_size);
-
-#if defined(SPD_EEPROM_ADDRESS) || \
- defined(SPD_EEPROM_ADDRESS1) || defined(SPD_EEPROM_ADDRESS2) || \
- defined(SPD_EEPROM_ADDRESS3) || defined(SPD_EEPROM_ADDRESS4)
-#if (CONFIG_NUM_DDR_CONTROLLERS == 1) && (CONFIG_DIMM_SLOTS_PER_CTLR == 1)
-u8 spd_i2c_addr[CONFIG_NUM_DDR_CONTROLLERS][CONFIG_DIMM_SLOTS_PER_CTLR] = {
- [0][0] = SPD_EEPROM_ADDRESS,
-};
-#elif (CONFIG_NUM_DDR_CONTROLLERS == 1) && (CONFIG_DIMM_SLOTS_PER_CTLR == 2)
-u8 spd_i2c_addr[CONFIG_NUM_DDR_CONTROLLERS][CONFIG_DIMM_SLOTS_PER_CTLR] = {
- [0][0] = SPD_EEPROM_ADDRESS1, /* controller 1 */
- [0][1] = SPD_EEPROM_ADDRESS2, /* controller 1 */
-};
-#elif (CONFIG_NUM_DDR_CONTROLLERS == 2) && (CONFIG_DIMM_SLOTS_PER_CTLR == 1)
-u8 spd_i2c_addr[CONFIG_NUM_DDR_CONTROLLERS][CONFIG_DIMM_SLOTS_PER_CTLR] = {
- [0][0] = SPD_EEPROM_ADDRESS1, /* controller 1 */
- [1][0] = SPD_EEPROM_ADDRESS2, /* controller 2 */
-};
-#elif (CONFIG_NUM_DDR_CONTROLLERS == 2) && (CONFIG_DIMM_SLOTS_PER_CTLR == 2)
-u8 spd_i2c_addr[CONFIG_NUM_DDR_CONTROLLERS][CONFIG_DIMM_SLOTS_PER_CTLR] = {
- [0][0] = SPD_EEPROM_ADDRESS1, /* controller 1 */
- [0][1] = SPD_EEPROM_ADDRESS2, /* controller 1 */
- [1][0] = SPD_EEPROM_ADDRESS3, /* controller 2 */
- [1][1] = SPD_EEPROM_ADDRESS4, /* controller 2 */
-};
-#elif (CONFIG_NUM_DDR_CONTROLLERS == 3) && (CONFIG_DIMM_SLOTS_PER_CTLR == 1)
-u8 spd_i2c_addr[CONFIG_NUM_DDR_CONTROLLERS][CONFIG_DIMM_SLOTS_PER_CTLR] = {
- [0][0] = SPD_EEPROM_ADDRESS1, /* controller 1 */
- [1][0] = SPD_EEPROM_ADDRESS2, /* controller 2 */
- [2][0] = SPD_EEPROM_ADDRESS3, /* controller 3 */
-};
-#elif (CONFIG_NUM_DDR_CONTROLLERS == 3) && (CONFIG_DIMM_SLOTS_PER_CTLR == 2)
-u8 spd_i2c_addr[CONFIG_NUM_DDR_CONTROLLERS][CONFIG_DIMM_SLOTS_PER_CTLR] = {
- [0][0] = SPD_EEPROM_ADDRESS1, /* controller 1 */
- [0][1] = SPD_EEPROM_ADDRESS2, /* controller 1 */
- [1][0] = SPD_EEPROM_ADDRESS3, /* controller 2 */
- [1][1] = SPD_EEPROM_ADDRESS4, /* controller 2 */
- [2][0] = SPD_EEPROM_ADDRESS5, /* controller 3 */
- [2][1] = SPD_EEPROM_ADDRESS6, /* controller 3 */
-};
-
-#endif
-
-static void __get_spd(generic_spd_eeprom_t *spd, u8 i2c_address)
-{
- int ret;
-
- i2c_set_bus_num(CONFIG_SYS_SPD_BUS_NUM);
-
- ret = i2c_read(i2c_address, 0, 1, (uchar *)spd,
- sizeof(generic_spd_eeprom_t));
-
- if (ret) {
- if (i2c_address ==
-#ifdef SPD_EEPROM_ADDRESS
- SPD_EEPROM_ADDRESS
-#elif defined(SPD_EEPROM_ADDRESS1)
- SPD_EEPROM_ADDRESS1
-#endif
- ) {
- printf("DDR: failed to read SPD from address %u\n",
- i2c_address);
- } else {
- debug("DDR: failed to read SPD from address %u\n",
- i2c_address);
- }
- memset(spd, 0, sizeof(generic_spd_eeprom_t));
- }
-}
-
-__attribute__((weak, alias("__get_spd")))
-void get_spd(generic_spd_eeprom_t *spd, u8 i2c_address);
-
-void fsl_ddr_get_spd(generic_spd_eeprom_t *ctrl_dimms_spd,
- unsigned int ctrl_num)
-{
- unsigned int i;
- unsigned int i2c_address = 0;
-
- if (ctrl_num >= CONFIG_NUM_DDR_CONTROLLERS) {
- printf("%s unexpected ctrl_num = %u\n", __FUNCTION__, ctrl_num);
- return;
- }
-
- for (i = 0; i < CONFIG_DIMM_SLOTS_PER_CTLR; i++) {
- i2c_address = spd_i2c_addr[ctrl_num][i];
- get_spd(&(ctrl_dimms_spd[i]), i2c_address);
- }
-}
-#else
-void fsl_ddr_get_spd(generic_spd_eeprom_t *ctrl_dimms_spd,
- unsigned int ctrl_num)
-{
-}
-#endif /* SPD_EEPROM_ADDRESSx */
-
-/*
- * ASSUMPTIONS:
- * - Same number of CONFIG_DIMM_SLOTS_PER_CTLR on each controller
- * - Same memory data bus width on all controllers
- *
- * NOTES:
- *
- * The memory controller and associated documentation use confusing
- * terminology when referring to the orgranization of DRAM.
- *
- * Here is a terminology translation table:
- *
- * memory controller/documention |industry |this code |signals
- * -------------------------------|-----------|-----------|-----------------
- * physical bank/bank |rank |rank |chip select (CS)
- * logical bank/sub-bank |bank |bank |bank address (BA)
- * page/row |row |page |row address
- * ??? |column |column |column address
- *
- * The naming confusion is further exacerbated by the descriptions of the
- * memory controller interleaving feature, where accesses are interleaved
- * _BETWEEN_ two seperate memory controllers. This is configured only in
- * CS0_CONFIG[INTLV_CTL] of each memory controller.
- *
- * memory controller documentation | number of chip selects
- * | per memory controller supported
- * --------------------------------|-----------------------------------------
- * cache line interleaving | 1 (CS0 only)
- * page interleaving | 1 (CS0 only)
- * bank interleaving | 1 (CS0 only)
- * superbank interleraving | depends on bank (chip select)
- * | interleraving [rank interleaving]
- * | mode used on every memory controller
- *
- * Even further confusing is the existence of the interleaving feature
- * _WITHIN_ each memory controller. The feature is referred to in
- * documentation as chip select interleaving or bank interleaving,
- * although it is configured in the DDR_SDRAM_CFG field.
- *
- * Name of field | documentation name | this code
- * -----------------------------|-----------------------|------------------
- * DDR_SDRAM_CFG[BA_INTLV_CTL] | Bank (chip select) | rank interleaving
- * | interleaving
- */
-
-const char *step_string_tbl[] = {
- "STEP_GET_SPD",
- "STEP_COMPUTE_DIMM_PARMS",
- "STEP_COMPUTE_COMMON_PARMS",
- "STEP_GATHER_OPTS",
- "STEP_ASSIGN_ADDRESSES",
- "STEP_COMPUTE_REGS",
- "STEP_PROGRAM_REGS",
- "STEP_ALL"
-};
-
-const char * step_to_string(unsigned int step) {
-
- unsigned int s = __ilog2(step);
-
- if ((1 << s) != step)
- return step_string_tbl[7];
-
- return step_string_tbl[s];
-}
-
-static unsigned long long __step_assign_addresses(fsl_ddr_info_t *pinfo,
- unsigned int dbw_cap_adj[])
-{
- int i, j;
- unsigned long long total_mem, current_mem_base, total_ctlr_mem;
- unsigned long long rank_density, ctlr_density = 0;
-
- /*
- * If a reduced data width is requested, but the SPD
- * specifies a physically wider device, adjust the
- * computed dimm capacities accordingly before
- * assigning addresses.
- */
- for (i = 0; i < CONFIG_NUM_DDR_CONTROLLERS; i++) {
- unsigned int found = 0;
-
- switch (pinfo->memctl_opts[i].data_bus_width) {
- case 2:
- /* 16-bit */
- for (j = 0; j < CONFIG_DIMM_SLOTS_PER_CTLR; j++) {
- unsigned int dw;
- if (!pinfo->dimm_params[i][j].n_ranks)
- continue;
- dw = pinfo->dimm_params[i][j].primary_sdram_width;
- if ((dw == 72 || dw == 64)) {
- dbw_cap_adj[i] = 2;
- break;
- } else if ((dw == 40 || dw == 32)) {
- dbw_cap_adj[i] = 1;
- break;
- }
- }
- break;
-
- case 1:
- /* 32-bit */
- for (j = 0; j < CONFIG_DIMM_SLOTS_PER_CTLR; j++) {
- unsigned int dw;
- dw = pinfo->dimm_params[i][j].data_width;
- if (pinfo->dimm_params[i][j].n_ranks
- && (dw == 72 || dw == 64)) {
- /*
- * FIXME: can't really do it
- * like this because this just
- * further reduces the memory
- */
- found = 1;
- break;
- }
- }
- if (found) {
- dbw_cap_adj[i] = 1;
- }
- break;
-
- case 0:
- /* 64-bit */
- break;
-
- default:
- printf("unexpected data bus width "
- "specified controller %u\n", i);
- return 1;
- }
- debug("dbw_cap_adj[%d]=%d\n", i, dbw_cap_adj[i]);
- }
-
- current_mem_base = 0ull;
- total_mem = 0;
- if (pinfo->memctl_opts[0].memctl_interleaving) {
- rank_density = pinfo->dimm_params[0][0].rank_density >>
- dbw_cap_adj[0];
- switch (pinfo->memctl_opts[0].ba_intlv_ctl &
- FSL_DDR_CS0_CS1_CS2_CS3) {
- case FSL_DDR_CS0_CS1_CS2_CS3:
- ctlr_density = 4 * rank_density;
- break;
- case FSL_DDR_CS0_CS1:
- case FSL_DDR_CS0_CS1_AND_CS2_CS3:
- ctlr_density = 2 * rank_density;
- break;
- case FSL_DDR_CS2_CS3:
- default:
- ctlr_density = rank_density;
- break;
- }
- debug("rank density is 0x%llx, ctlr density is 0x%llx\n",
- rank_density, ctlr_density);
- for (i = 0; i < CONFIG_NUM_DDR_CONTROLLERS; i++) {
- if (pinfo->memctl_opts[i].memctl_interleaving) {
- switch (pinfo->memctl_opts[i].memctl_interleaving_mode) {
- case FSL_DDR_CACHE_LINE_INTERLEAVING:
- case FSL_DDR_PAGE_INTERLEAVING:
- case FSL_DDR_BANK_INTERLEAVING:
- case FSL_DDR_SUPERBANK_INTERLEAVING:
- total_ctlr_mem = 2 * ctlr_density;
- break;
- case FSL_DDR_3WAY_1KB_INTERLEAVING:
- case FSL_DDR_3WAY_4KB_INTERLEAVING:
- case FSL_DDR_3WAY_8KB_INTERLEAVING:
- total_ctlr_mem = 3 * ctlr_density;
- break;
- case FSL_DDR_4WAY_1KB_INTERLEAVING:
- case FSL_DDR_4WAY_4KB_INTERLEAVING:
- case FSL_DDR_4WAY_8KB_INTERLEAVING:
- total_ctlr_mem = 4 * ctlr_density;
- break;
- default:
- panic("Unknown interleaving mode");
- }
- pinfo->common_timing_params[i].base_address =
- current_mem_base;
- pinfo->common_timing_params[i].total_mem =
- total_ctlr_mem;
- total_mem = current_mem_base + total_ctlr_mem;
- debug("ctrl %d base 0x%llx\n", i, current_mem_base);
- debug("ctrl %d total 0x%llx\n", i, total_ctlr_mem);
- } else {
- /* when 3rd controller not interleaved */
- current_mem_base = total_mem;
- total_ctlr_mem = 0;
- pinfo->common_timing_params[i].base_address =
- current_mem_base;
- for (j = 0; j < CONFIG_DIMM_SLOTS_PER_CTLR; j++) {
- unsigned long long cap =
- pinfo->dimm_params[i][j].capacity >> dbw_cap_adj[i];
- pinfo->dimm_params[i][j].base_address =
- current_mem_base;
- debug("ctrl %d dimm %d base 0x%llx\n", i, j, current_mem_base);
- current_mem_base += cap;
- total_ctlr_mem += cap;
- }
- debug("ctrl %d total 0x%llx\n", i, total_ctlr_mem);
- pinfo->common_timing_params[i].total_mem =
- total_ctlr_mem;
- total_mem += total_ctlr_mem;
- }
- }
- } else {
- /*
- * Simple linear assignment if memory
- * controllers are not interleaved.
- */
- for (i = 0; i < CONFIG_NUM_DDR_CONTROLLERS; i++) {
- total_ctlr_mem = 0;
- pinfo->common_timing_params[i].base_address =
- current_mem_base;
- for (j = 0; j < CONFIG_DIMM_SLOTS_PER_CTLR; j++) {
- /* Compute DIMM base addresses. */
- unsigned long long cap =
- pinfo->dimm_params[i][j].capacity >> dbw_cap_adj[i];
- pinfo->dimm_params[i][j].base_address =
- current_mem_base;
- debug("ctrl %d dimm %d base 0x%llx\n", i, j, current_mem_base);
- current_mem_base += cap;
- total_ctlr_mem += cap;
- }
- debug("ctrl %d total 0x%llx\n", i, total_ctlr_mem);
- pinfo->common_timing_params[i].total_mem =
- total_ctlr_mem;
- total_mem += total_ctlr_mem;
- }
- }
- debug("Total mem by %s is 0x%llx\n", __func__, total_mem);
-
- return total_mem;
-}
-
-/* Use weak function to allow board file to override the address assignment */
-__attribute__((weak, alias("__step_assign_addresses")))
-unsigned long long step_assign_addresses(fsl_ddr_info_t *pinfo,
- unsigned int dbw_cap_adj[]);
-
-unsigned long long
-fsl_ddr_compute(fsl_ddr_info_t *pinfo, unsigned int start_step,
- unsigned int size_only)
-{
- unsigned int i, j;
- unsigned long long total_mem = 0;
- int assert_reset;
-
- fsl_ddr_cfg_regs_t *ddr_reg = pinfo->fsl_ddr_config_reg;
- common_timing_params_t *timing_params = pinfo->common_timing_params;
- assert_reset = board_need_mem_reset();
-
- /* data bus width capacity adjust shift amount */
- unsigned int dbw_capacity_adjust[CONFIG_NUM_DDR_CONTROLLERS];
-
- for (i = 0; i < CONFIG_NUM_DDR_CONTROLLERS; i++) {
- dbw_capacity_adjust[i] = 0;
- }
-
- debug("starting at step %u (%s)\n",
- start_step, step_to_string(start_step));
-
- switch (start_step) {
- case STEP_GET_SPD:
-#if defined(CONFIG_DDR_SPD) || defined(CONFIG_SPD_EEPROM)
- /* STEP 1: Gather all DIMM SPD data */
- for (i = 0; i < CONFIG_NUM_DDR_CONTROLLERS; i++) {
- fsl_ddr_get_spd(pinfo->spd_installed_dimms[i], i);
- }
-
- case STEP_COMPUTE_DIMM_PARMS:
- /* STEP 2: Compute DIMM parameters from SPD data */
-
- for (i = 0; i < CONFIG_NUM_DDR_CONTROLLERS; i++) {
- for (j = 0; j < CONFIG_DIMM_SLOTS_PER_CTLR; j++) {
- unsigned int retval;
- generic_spd_eeprom_t *spd =
- &(pinfo->spd_installed_dimms[i][j]);
- dimm_params_t *pdimm =
- &(pinfo->dimm_params[i][j]);
-
- retval = compute_dimm_parameters(spd, pdimm, i);
-#ifdef CONFIG_SYS_DDR_RAW_TIMING
- if (!i && !j && retval) {
- printf("SPD error on controller %d! "
- "Trying fallback to raw timing "
- "calculation\n", i);
- fsl_ddr_get_dimm_params(pdimm, i, j);
- }
-#else
- if (retval == 2) {
- printf("Error: compute_dimm_parameters"
- " non-zero returned FATAL value "
- "for memctl=%u dimm=%u\n", i, j);
- return 0;
- }
-#endif
- if (retval) {
- debug("Warning: compute_dimm_parameters"
- " non-zero return value for memctl=%u "
- "dimm=%u\n", i, j);
- }
- }
- }
-
-#elif defined(CONFIG_SYS_DDR_RAW_TIMING)
- case STEP_COMPUTE_DIMM_PARMS:
- for (i = 0; i < CONFIG_NUM_DDR_CONTROLLERS; i++) {
- for (j = 0; j < CONFIG_DIMM_SLOTS_PER_CTLR; j++) {
- dimm_params_t *pdimm =
- &(pinfo->dimm_params[i][j]);
- fsl_ddr_get_dimm_params(pdimm, i, j);
- }
- }
- debug("Filling dimm parameters from board specific file\n");
-#endif
- case STEP_COMPUTE_COMMON_PARMS:
- /*
- * STEP 3: Compute a common set of timing parameters
- * suitable for all of the DIMMs on each memory controller
- */
- for (i = 0; i < CONFIG_NUM_DDR_CONTROLLERS; i++) {
- debug("Computing lowest common DIMM"
- " parameters for memctl=%u\n", i);
- compute_lowest_common_dimm_parameters(
- pinfo->dimm_params[i],
- &timing_params[i],
- CONFIG_DIMM_SLOTS_PER_CTLR);
- }
-
- case STEP_GATHER_OPTS:
- /* STEP 4: Gather configuration requirements from user */
- for (i = 0; i < CONFIG_NUM_DDR_CONTROLLERS; i++) {
- debug("Reloading memory controller "
- "configuration options for memctl=%u\n", i);
- /*
- * This "reloads" the memory controller options
- * to defaults. If the user "edits" an option,
- * next_step points to the step after this,
- * which is currently STEP_ASSIGN_ADDRESSES.
- */
- populate_memctl_options(
- timing_params[i].all_dimms_registered,
- &pinfo->memctl_opts[i],
- pinfo->dimm_params[i], i);
- /*
- * For RDIMMs, JEDEC spec requires clocks to be stable
- * before reset signal is deasserted. For the boards
- * using fixed parameters, this function should be
- * be called from board init file.
- */
- if (timing_params[i].all_dimms_registered)
- assert_reset = 1;
- }
- if (assert_reset) {
- debug("Asserting mem reset\n");
- board_assert_mem_reset();
- }
-
- case STEP_ASSIGN_ADDRESSES:
- /* STEP 5: Assign addresses to chip selects */
- check_interleaving_options(pinfo);
- total_mem = step_assign_addresses(pinfo, dbw_capacity_adjust);
-
- case STEP_COMPUTE_REGS:
- /* STEP 6: compute controller register values */
- debug("FSL Memory ctrl register computation\n");
- for (i = 0; i < CONFIG_NUM_DDR_CONTROLLERS; i++) {
- if (timing_params[i].ndimms_present == 0) {
- memset(&ddr_reg[i], 0,
- sizeof(fsl_ddr_cfg_regs_t));
- continue;
- }
-
- compute_fsl_memctl_config_regs(
- &pinfo->memctl_opts[i],
- &ddr_reg[i], &timing_params[i],
- pinfo->dimm_params[i],
- dbw_capacity_adjust[i],
- size_only);
- }
-
- default:
- break;
- }
-
- {
- /*
- * Compute the amount of memory available just by
- * looking for the highest valid CSn_BNDS value.
- * This allows us to also experiment with using
- * only CS0 when using dual-rank DIMMs.
- */
- unsigned int max_end = 0;
-
- for (i = 0; i < CONFIG_NUM_DDR_CONTROLLERS; i++) {
- for (j = 0; j < CONFIG_CHIP_SELECTS_PER_CTRL; j++) {
- fsl_ddr_cfg_regs_t *reg = &ddr_reg[i];
- if (reg->cs[j].config & 0x80000000) {
- unsigned int end;
- /*
- * 0xfffffff is a special value we put
- * for unused bnds
- */
- if (reg->cs[j].bnds == 0xffffffff)
- continue;
- end = reg->cs[j].bnds & 0xffff;
- if (end > max_end) {
- max_end = end;
- }
- }
- }
- }
-
- total_mem = 1 + (((unsigned long long)max_end << 24ULL)
- | 0xFFFFFFULL);
- }
-
- return total_mem;
-}
-
-/*
- * fsl_ddr_sdram() -- this is the main function to be called by
- * initdram() in the board file.
- *
- * It returns amount of memory configured in bytes.
- */
-phys_size_t fsl_ddr_sdram(void)
-{
- unsigned int i;
- unsigned int law_memctl = LAW_TRGT_IF_DDR_1;
- unsigned long long total_memory;
- fsl_ddr_info_t info;
- int deassert_reset;
-
- /* Reset info structure. */
- memset(&info, 0, sizeof(fsl_ddr_info_t));
-
- /* Compute it once normally. */
-#ifdef CONFIG_FSL_DDR_INTERACTIVE
- if (tstc() && (getc() == 'd')) { /* we got a key press of 'd' */
- total_memory = fsl_ddr_interactive(&info, 0);
- } else if (fsl_ddr_interactive_env_var_exists()) {
- total_memory = fsl_ddr_interactive(&info, 1);
- } else
-#endif
- total_memory = fsl_ddr_compute(&info, STEP_GET_SPD, 0);
-
- /* setup 3-way interleaving before enabling DDRC */
- if (info.memctl_opts[0].memctl_interleaving) {
- switch (info.memctl_opts[0].memctl_interleaving_mode) {
- case FSL_DDR_3WAY_1KB_INTERLEAVING:
- case FSL_DDR_3WAY_4KB_INTERLEAVING:
- case FSL_DDR_3WAY_8KB_INTERLEAVING:
- fsl_ddr_set_intl3r(
- info.memctl_opts[0].memctl_interleaving_mode);
- break;
- default:
- break;
- }
- }
-
- /*
- * Program configuration registers.
- * JEDEC specs requires clocks to be stable before deasserting reset
- * for RDIMMs. Clocks start after chip select is enabled and clock
- * control register is set. During step 1, all controllers have their
- * registers set but not enabled. Step 2 proceeds after deasserting
- * reset through board FPGA or GPIO.
- * For non-registered DIMMs, initialization can go through but it is
- * also OK to follow the same flow.
- */
- deassert_reset = board_need_mem_reset();
- for (i = 0; i < CONFIG_NUM_DDR_CONTROLLERS; i++) {
- if (info.common_timing_params[i].all_dimms_registered)
- deassert_reset = 1;
- }
- for (i = 0; i < CONFIG_NUM_DDR_CONTROLLERS; i++) {
- debug("Programming controller %u\n", i);
- if (info.common_timing_params[i].ndimms_present == 0) {
- debug("No dimms present on controller %u; "
- "skipping programming\n", i);
- continue;
- }
- /*
- * The following call with step = 1 returns before enabling
- * the controller. It has to finish with step = 2 later.
- */
- fsl_ddr_set_memctl_regs(&(info.fsl_ddr_config_reg[i]), i,
- deassert_reset ? 1 : 0);
- }
- if (deassert_reset) {
- /* Use board FPGA or GPIO to deassert reset signal */
- debug("Deasserting mem reset\n");
- board_deassert_mem_reset();
- for (i = 0; i < CONFIG_NUM_DDR_CONTROLLERS; i++) {
- /* Call with step = 2 to continue initialization */
- fsl_ddr_set_memctl_regs(&(info.fsl_ddr_config_reg[i]),
- i, 2);
- }
- }
-
- /* program LAWs */
- for (i = 0; i < CONFIG_NUM_DDR_CONTROLLERS; i++) {
- if (info.memctl_opts[i].memctl_interleaving) {
- switch (info.memctl_opts[i].memctl_interleaving_mode) {
- case FSL_DDR_CACHE_LINE_INTERLEAVING:
- case FSL_DDR_PAGE_INTERLEAVING:
- case FSL_DDR_BANK_INTERLEAVING:
- case FSL_DDR_SUPERBANK_INTERLEAVING:
- if (i == 0) {
- law_memctl = LAW_TRGT_IF_DDR_INTRLV;
- fsl_ddr_set_lawbar(&info.common_timing_params[i],
- law_memctl, i);
- } else if (i == 2) {
- law_memctl = LAW_TRGT_IF_DDR_INTLV_34;
- fsl_ddr_set_lawbar(&info.common_timing_params[i],
- law_memctl, i);
- }
- break;
- case FSL_DDR_3WAY_1KB_INTERLEAVING:
- case FSL_DDR_3WAY_4KB_INTERLEAVING:
- case FSL_DDR_3WAY_8KB_INTERLEAVING:
- law_memctl = LAW_TRGT_IF_DDR_INTLV_123;
- if (i == 0) {
- fsl_ddr_set_lawbar(&info.common_timing_params[i],
- law_memctl, i);
- }
- break;
- case FSL_DDR_4WAY_1KB_INTERLEAVING:
- case FSL_DDR_4WAY_4KB_INTERLEAVING:
- case FSL_DDR_4WAY_8KB_INTERLEAVING:
- law_memctl = LAW_TRGT_IF_DDR_INTLV_1234;
- if (i == 0)
- fsl_ddr_set_lawbar(&info.common_timing_params[i],
- law_memctl, i);
- /* place holder for future 4-way interleaving */
- break;
- default:
- break;
- }
- } else {
- switch (i) {
- case 0:
- law_memctl = LAW_TRGT_IF_DDR_1;
- break;
- case 1:
- law_memctl = LAW_TRGT_IF_DDR_2;
- break;
- case 2:
- law_memctl = LAW_TRGT_IF_DDR_3;
- break;
- case 3:
- law_memctl = LAW_TRGT_IF_DDR_4;
- break;
- default:
- break;
- }
- fsl_ddr_set_lawbar(&info.common_timing_params[i],
- law_memctl, i);
- }
- }
-
- debug("total_memory by %s = %llu\n", __func__, total_memory);
-
-#if !defined(CONFIG_PHYS_64BIT)
- /* Check for 4G or more. Bad. */
- if (total_memory >= (1ull << 32)) {
- puts("Detected ");
- print_size(total_memory, " of memory\n");
- printf(" This U-Boot only supports < 4G of DDR\n");
- printf(" You could rebuild it with CONFIG_PHYS_64BIT\n");
- printf(" "); /* re-align to match init_func_ram print */
- total_memory = CONFIG_MAX_MEM_MAPPED;
- }
-#endif
-
- return total_memory;
-}
-
-/*
- * fsl_ddr_sdram_size() - This function only returns the size of the total
- * memory without setting ddr control registers.
- */
-phys_size_t
-fsl_ddr_sdram_size(void)
-{
- fsl_ddr_info_t info;
- unsigned long long total_memory = 0;
-
- memset(&info, 0 , sizeof(fsl_ddr_info_t));
-
- /* Compute it once normally. */
- total_memory = fsl_ddr_compute(&info, STEP_GET_SPD, 1);
-
- return total_memory;
-}
diff --git a/arch/powerpc/cpu/mpc8xxx/ddr/options.c b/arch/powerpc/cpu/mpc8xxx/ddr/options.c
deleted file mode 100644
index 1297845553..0000000000
--- a/arch/powerpc/cpu/mpc8xxx/ddr/options.c
+++ /dev/null
@@ -1,1147 +0,0 @@
-/*
- * Copyright 2008, 2010-2012 Freescale Semiconductor, Inc.
- *
- * SPDX-License-Identifier: GPL-2.0+
- */
-
-#include <common.h>
-#include <hwconfig.h>
-#include <asm/fsl_ddr_sdram.h>
-
-#include "ddr.h"
-
-/*
- * Use our own stack based buffer before relocation to allow accessing longer
- * hwconfig strings that might be in the environment before we've relocated.
- * This is pretty fragile on both the use of stack and if the buffer is big
- * enough. However we will get a warning from getenv_f for the later.
- */
-
-/* Board-specific functions defined in each board's ddr.c */
-extern void fsl_ddr_board_options(memctl_options_t *popts,
- dimm_params_t *pdimm,
- unsigned int ctrl_num);
-
-struct dynamic_odt {
- unsigned int odt_rd_cfg;
- unsigned int odt_wr_cfg;
- unsigned int odt_rtt_norm;
- unsigned int odt_rtt_wr;
-};
-
-#ifdef CONFIG_FSL_DDR3
-static const struct dynamic_odt single_Q[4] = {
- { /* cs0 */
- FSL_DDR_ODT_NEVER,
- FSL_DDR_ODT_CS_AND_OTHER_DIMM,
- DDR3_RTT_20_OHM,
- DDR3_RTT_120_OHM
- },
- { /* cs1 */
- FSL_DDR_ODT_NEVER,
- FSL_DDR_ODT_NEVER, /* tied high */
- DDR3_RTT_OFF,
- DDR3_RTT_120_OHM
- },
- { /* cs2 */
- FSL_DDR_ODT_NEVER,
- FSL_DDR_ODT_CS_AND_OTHER_DIMM,
- DDR3_RTT_20_OHM,
- DDR3_RTT_120_OHM
- },
- { /* cs3 */
- FSL_DDR_ODT_NEVER,
- FSL_DDR_ODT_NEVER, /* tied high */
- DDR3_RTT_OFF,
- DDR3_RTT_120_OHM
- }
-};
-
-static const struct dynamic_odt single_D[4] = {
- { /* cs0 */
- FSL_DDR_ODT_NEVER,
- FSL_DDR_ODT_ALL,
- DDR3_RTT_40_OHM,
- DDR3_RTT_OFF
- },
- { /* cs1 */
- FSL_DDR_ODT_NEVER,
- FSL_DDR_ODT_NEVER,
- DDR3_RTT_OFF,
- DDR3_RTT_OFF
- },
- {0, 0, 0, 0},
- {0, 0, 0, 0}
-};
-
-static const struct dynamic_odt single_S[4] = {
- { /* cs0 */
- FSL_DDR_ODT_NEVER,
- FSL_DDR_ODT_ALL,
- DDR3_RTT_40_OHM,
- DDR3_RTT_OFF
- },
- {0, 0, 0, 0},
- {0, 0, 0, 0},
- {0, 0, 0, 0},
-};
-
-static const struct dynamic_odt dual_DD[4] = {
- { /* cs0 */
- FSL_DDR_ODT_NEVER,
- FSL_DDR_ODT_SAME_DIMM,
- DDR3_RTT_120_OHM,
- DDR3_RTT_OFF
- },
- { /* cs1 */
- FSL_DDR_ODT_OTHER_DIMM,
- FSL_DDR_ODT_OTHER_DIMM,
- DDR3_RTT_30_OHM,
- DDR3_RTT_OFF
- },
- { /* cs2 */
- FSL_DDR_ODT_NEVER,
- FSL_DDR_ODT_SAME_DIMM,
- DDR3_RTT_120_OHM,
- DDR3_RTT_OFF
- },
- { /* cs3 */
- FSL_DDR_ODT_OTHER_DIMM,
- FSL_DDR_ODT_OTHER_DIMM,
- DDR3_RTT_30_OHM,
- DDR3_RTT_OFF
- }
-};
-
-static const struct dynamic_odt dual_DS[4] = {
- { /* cs0 */
- FSL_DDR_ODT_NEVER,
- FSL_DDR_ODT_SAME_DIMM,
- DDR3_RTT_120_OHM,
- DDR3_RTT_OFF
- },
- { /* cs1 */
- FSL_DDR_ODT_OTHER_DIMM,
- FSL_DDR_ODT_OTHER_DIMM,
- DDR3_RTT_30_OHM,
- DDR3_RTT_OFF
- },
- { /* cs2 */
- FSL_DDR_ODT_OTHER_DIMM,
- FSL_DDR_ODT_ALL,
- DDR3_RTT_20_OHM,
- DDR3_RTT_120_OHM
- },
- {0, 0, 0, 0}
-};
-static const struct dynamic_odt dual_SD[4] = {
- { /* cs0 */
- FSL_DDR_ODT_OTHER_DIMM,
- FSL_DDR_ODT_ALL,
- DDR3_RTT_20_OHM,
- DDR3_RTT_120_OHM
- },
- {0, 0, 0, 0},
- { /* cs2 */
- FSL_DDR_ODT_NEVER,
- FSL_DDR_ODT_SAME_DIMM,
- DDR3_RTT_120_OHM,
- DDR3_RTT_OFF
- },
- { /* cs3 */
- FSL_DDR_ODT_OTHER_DIMM,
- FSL_DDR_ODT_OTHER_DIMM,
- DDR3_RTT_20_OHM,
- DDR3_RTT_OFF
- }
-};
-
-static const struct dynamic_odt dual_SS[4] = {
- { /* cs0 */
- FSL_DDR_ODT_OTHER_DIMM,
- FSL_DDR_ODT_ALL,
- DDR3_RTT_30_OHM,
- DDR3_RTT_120_OHM
- },
- {0, 0, 0, 0},
- { /* cs2 */
- FSL_DDR_ODT_OTHER_DIMM,
- FSL_DDR_ODT_ALL,
- DDR3_RTT_30_OHM,
- DDR3_RTT_120_OHM
- },
- {0, 0, 0, 0}
-};
-
-static const struct dynamic_odt dual_D0[4] = {
- { /* cs0 */
- FSL_DDR_ODT_NEVER,
- FSL_DDR_ODT_SAME_DIMM,
- DDR3_RTT_40_OHM,
- DDR3_RTT_OFF
- },
- { /* cs1 */
- FSL_DDR_ODT_NEVER,
- FSL_DDR_ODT_NEVER,
- DDR3_RTT_OFF,
- DDR3_RTT_OFF
- },
- {0, 0, 0, 0},
- {0, 0, 0, 0}
-};
-
-static const struct dynamic_odt dual_0D[4] = {
- {0, 0, 0, 0},
- {0, 0, 0, 0},
- { /* cs2 */
- FSL_DDR_ODT_NEVER,
- FSL_DDR_ODT_SAME_DIMM,
- DDR3_RTT_40_OHM,
- DDR3_RTT_OFF
- },
- { /* cs3 */
- FSL_DDR_ODT_NEVER,
- FSL_DDR_ODT_NEVER,
- DDR3_RTT_OFF,
- DDR3_RTT_OFF
- }
-};
-
-static const struct dynamic_odt dual_S0[4] = {
- { /* cs0 */
- FSL_DDR_ODT_NEVER,
- FSL_DDR_ODT_CS,
- DDR3_RTT_40_OHM,
- DDR3_RTT_OFF
- },
- {0, 0, 0, 0},
- {0, 0, 0, 0},
- {0, 0, 0, 0}
-
-};
-
-static const struct dynamic_odt dual_0S[4] = {
- {0, 0, 0, 0},
- {0, 0, 0, 0},
- { /* cs2 */
- FSL_DDR_ODT_NEVER,
- FSL_DDR_ODT_CS,
- DDR3_RTT_40_OHM,
- DDR3_RTT_OFF
- },
- {0, 0, 0, 0}
-
-};
-
-static const struct dynamic_odt odt_unknown[4] = {
- { /* cs0 */
- FSL_DDR_ODT_NEVER,
- FSL_DDR_ODT_CS,
- DDR3_RTT_120_OHM,
- DDR3_RTT_OFF
- },
- { /* cs1 */
- FSL_DDR_ODT_NEVER,
- FSL_DDR_ODT_CS,
- DDR3_RTT_120_OHM,
- DDR3_RTT_OFF
- },
- { /* cs2 */
- FSL_DDR_ODT_NEVER,
- FSL_DDR_ODT_CS,
- DDR3_RTT_120_OHM,
- DDR3_RTT_OFF
- },
- { /* cs3 */
- FSL_DDR_ODT_NEVER,
- FSL_DDR_ODT_CS,
- DDR3_RTT_120_OHM,
- DDR3_RTT_OFF
- }
-};
-#else /* CONFIG_FSL_DDR3 */
-static const struct dynamic_odt single_Q[4] = {
- {0, 0, 0, 0},
- {0, 0, 0, 0},
- {0, 0, 0, 0},
- {0, 0, 0, 0}
-};
-
-static const struct dynamic_odt single_D[4] = {
- { /* cs0 */
- FSL_DDR_ODT_NEVER,
- FSL_DDR_ODT_ALL,
- DDR2_RTT_150_OHM,
- DDR2_RTT_OFF
- },
- { /* cs1 */
- FSL_DDR_ODT_NEVER,
- FSL_DDR_ODT_NEVER,
- DDR2_RTT_OFF,
- DDR2_RTT_OFF
- },
- {0, 0, 0, 0},
- {0, 0, 0, 0}
-};
-
-static const struct dynamic_odt single_S[4] = {
- { /* cs0 */
- FSL_DDR_ODT_NEVER,
- FSL_DDR_ODT_ALL,
- DDR2_RTT_150_OHM,
- DDR2_RTT_OFF
- },
- {0, 0, 0, 0},
- {0, 0, 0, 0},
- {0, 0, 0, 0},
-};
-
-static const struct dynamic_odt dual_DD[4] = {
- { /* cs0 */
- FSL_DDR_ODT_OTHER_DIMM,
- FSL_DDR_ODT_OTHER_DIMM,
- DDR2_RTT_75_OHM,
- DDR2_RTT_OFF
- },
- { /* cs1 */
- FSL_DDR_ODT_NEVER,
- FSL_DDR_ODT_NEVER,
- DDR2_RTT_OFF,
- DDR2_RTT_OFF
- },
- { /* cs2 */
- FSL_DDR_ODT_OTHER_DIMM,
- FSL_DDR_ODT_OTHER_DIMM,
- DDR2_RTT_75_OHM,
- DDR2_RTT_OFF
- },
- { /* cs3 */
- FSL_DDR_ODT_NEVER,
- FSL_DDR_ODT_NEVER,
- DDR2_RTT_OFF,
- DDR2_RTT_OFF
- }
-};
-
-static const struct dynamic_odt dual_DS[4] = {
- { /* cs0 */
- FSL_DDR_ODT_OTHER_DIMM,
- FSL_DDR_ODT_OTHER_DIMM,
- DDR2_RTT_75_OHM,
- DDR2_RTT_OFF
- },
- { /* cs1 */
- FSL_DDR_ODT_NEVER,
- FSL_DDR_ODT_NEVER,
- DDR2_RTT_OFF,
- DDR2_RTT_OFF
- },
- { /* cs2 */
- FSL_DDR_ODT_OTHER_DIMM,
- FSL_DDR_ODT_OTHER_DIMM,
- DDR2_RTT_75_OHM,
- DDR2_RTT_OFF
- },
- {0, 0, 0, 0}
-};
-
-static const struct dynamic_odt dual_SD[4] = {
- { /* cs0 */
- FSL_DDR_ODT_OTHER_DIMM,
- FSL_DDR_ODT_OTHER_DIMM,
- DDR2_RTT_75_OHM,
- DDR2_RTT_OFF
- },
- {0, 0, 0, 0},
- { /* cs2 */
- FSL_DDR_ODT_OTHER_DIMM,
- FSL_DDR_ODT_OTHER_DIMM,
- DDR2_RTT_75_OHM,
- DDR2_RTT_OFF
- },
- { /* cs3 */
- FSL_DDR_ODT_NEVER,
- FSL_DDR_ODT_NEVER,
- DDR2_RTT_OFF,
- DDR2_RTT_OFF
- }
-};
-
-static const struct dynamic_odt dual_SS[4] = {
- { /* cs0 */
- FSL_DDR_ODT_OTHER_DIMM,
- FSL_DDR_ODT_OTHER_DIMM,
- DDR2_RTT_75_OHM,
- DDR2_RTT_OFF
- },
- {0, 0, 0, 0},
- { /* cs2 */
- FSL_DDR_ODT_OTHER_DIMM,
- FSL_DDR_ODT_OTHER_DIMM,
- DDR2_RTT_75_OHM,
- DDR2_RTT_OFF
- },
- {0, 0, 0, 0}
-};
-
-static const struct dynamic_odt dual_D0[4] = {
- { /* cs0 */
- FSL_DDR_ODT_NEVER,
- FSL_DDR_ODT_ALL,
- DDR2_RTT_150_OHM,
- DDR2_RTT_OFF
- },
- { /* cs1 */
- FSL_DDR_ODT_NEVER,
- FSL_DDR_ODT_NEVER,
- DDR2_RTT_OFF,
- DDR2_RTT_OFF
- },
- {0, 0, 0, 0},
- {0, 0, 0, 0}
-};
-
-static const struct dynamic_odt dual_0D[4] = {
- {0, 0, 0, 0},
- {0, 0, 0, 0},
- { /* cs2 */
- FSL_DDR_ODT_NEVER,
- FSL_DDR_ODT_ALL,
- DDR2_RTT_150_OHM,
- DDR2_RTT_OFF
- },
- { /* cs3 */
- FSL_DDR_ODT_NEVER,
- FSL_DDR_ODT_NEVER,
- DDR2_RTT_OFF,
- DDR2_RTT_OFF
- }
-};
-
-static const struct dynamic_odt dual_S0[4] = {
- { /* cs0 */
- FSL_DDR_ODT_NEVER,
- FSL_DDR_ODT_CS,
- DDR2_RTT_150_OHM,
- DDR2_RTT_OFF
- },
- {0, 0, 0, 0},
- {0, 0, 0, 0},
- {0, 0, 0, 0}
-
-};
-
-static const struct dynamic_odt dual_0S[4] = {
- {0, 0, 0, 0},
- {0, 0, 0, 0},
- { /* cs2 */
- FSL_DDR_ODT_NEVER,
- FSL_DDR_ODT_CS,
- DDR2_RTT_150_OHM,
- DDR2_RTT_OFF
- },
- {0, 0, 0, 0}
-
-};
-
-static const struct dynamic_odt odt_unknown[4] = {
- { /* cs0 */
- FSL_DDR_ODT_NEVER,
- FSL_DDR_ODT_CS,
- DDR2_RTT_75_OHM,
- DDR2_RTT_OFF
- },
- { /* cs1 */
- FSL_DDR_ODT_NEVER,
- FSL_DDR_ODT_NEVER,
- DDR2_RTT_OFF,
- DDR2_RTT_OFF
- },
- { /* cs2 */
- FSL_DDR_ODT_NEVER,
- FSL_DDR_ODT_CS,
- DDR2_RTT_75_OHM,
- DDR2_RTT_OFF
- },
- { /* cs3 */
- FSL_DDR_ODT_NEVER,
- FSL_DDR_ODT_NEVER,
- DDR2_RTT_OFF,
- DDR2_RTT_OFF
- }
-};
-#endif
-
-/*
- * Automatically seleect bank interleaving mode based on DIMMs
- * in this order: cs0_cs1_cs2_cs3, cs0_cs1, null.
- * This function only deal with one or two slots per controller.
- */
-static inline unsigned int auto_bank_intlv(dimm_params_t *pdimm)
-{
-#if (CONFIG_DIMM_SLOTS_PER_CTLR == 1)
- if (pdimm[0].n_ranks == 4)
- return FSL_DDR_CS0_CS1_CS2_CS3;
- else if (pdimm[0].n_ranks == 2)
- return FSL_DDR_CS0_CS1;
-#elif (CONFIG_DIMM_SLOTS_PER_CTLR == 2)
-#ifdef CONFIG_FSL_DDR_FIRST_SLOT_QUAD_CAPABLE
- if (pdimm[0].n_ranks == 4)
- return FSL_DDR_CS0_CS1_CS2_CS3;
-#endif
- if (pdimm[0].n_ranks == 2) {
- if (pdimm[1].n_ranks == 2)
- return FSL_DDR_CS0_CS1_CS2_CS3;
- else
- return FSL_DDR_CS0_CS1;
- }
-#endif
- return 0;
-}
-
-unsigned int populate_memctl_options(int all_dimms_registered,
- memctl_options_t *popts,
- dimm_params_t *pdimm,
- unsigned int ctrl_num)
-{
- unsigned int i;
- char buffer[HWCONFIG_BUFFER_SIZE];
- char *buf = NULL;
-#if defined(CONFIG_FSL_DDR3) || defined(CONFIG_FSL_DDR2)
- const struct dynamic_odt *pdodt = odt_unknown;
-#endif
- ulong ddr_freq;
-
- /*
- * Extract hwconfig from environment since we have not properly setup
- * the environment but need it for ddr config params
- */
- if (getenv_f("hwconfig", buffer, sizeof(buffer)) > 0)
- buf = buffer;
-
-#if defined(CONFIG_FSL_DDR3) || defined(CONFIG_FSL_DDR2)
- /* Chip select options. */
- if (CONFIG_DIMM_SLOTS_PER_CTLR == 1) {
- switch (pdimm[0].n_ranks) {
- case 1:
- pdodt = single_S;
- break;
- case 2:
- pdodt = single_D;
- break;
- case 4:
- pdodt = single_Q;
- break;
- }
- } else if (CONFIG_DIMM_SLOTS_PER_CTLR == 2) {
- switch (pdimm[0].n_ranks) {
-#ifdef CONFIG_FSL_DDR_FIRST_SLOT_QUAD_CAPABLE
- case 4:
- pdodt = single_Q;
- if (pdimm[1].n_ranks)
- printf("Error: Quad- and Dual-rank DIMMs "
- "cannot be used together\n");
- break;
-#endif
- case 2:
- switch (pdimm[1].n_ranks) {
- case 2:
- pdodt = dual_DD;
- break;
- case 1:
- pdodt = dual_DS;
- break;
- case 0:
- pdodt = dual_D0;
- break;
- }
- break;
- case 1:
- switch (pdimm[1].n_ranks) {
- case 2:
- pdodt = dual_SD;
- break;
- case 1:
- pdodt = dual_SS;
- break;
- case 0:
- pdodt = dual_S0;
- break;
- }
- break;
- case 0:
- switch (pdimm[1].n_ranks) {
- case 2:
- pdodt = dual_0D;
- break;
- case 1:
- pdodt = dual_0S;
- break;
- }
- break;
- }
- }
-#endif
-
- /* Pick chip-select local options. */
- for (i = 0; i < CONFIG_CHIP_SELECTS_PER_CTRL; i++) {
-#if defined(CONFIG_FSL_DDR3) || defined(CONFIG_FSL_DDR2)
- popts->cs_local_opts[i].odt_rd_cfg = pdodt[i].odt_rd_cfg;
- popts->cs_local_opts[i].odt_wr_cfg = pdodt[i].odt_wr_cfg;
- popts->cs_local_opts[i].odt_rtt_norm = pdodt[i].odt_rtt_norm;
- popts->cs_local_opts[i].odt_rtt_wr = pdodt[i].odt_rtt_wr;
-#else
- popts->cs_local_opts[i].odt_rd_cfg = FSL_DDR_ODT_NEVER;
- popts->cs_local_opts[i].odt_wr_cfg = FSL_DDR_ODT_CS;
-#endif
- popts->cs_local_opts[i].auto_precharge = 0;
- }
-
- /* Pick interleaving mode. */
-
- /*
- * 0 = no interleaving
- * 1 = interleaving between 2 controllers
- */
- popts->memctl_interleaving = 0;
-
- /*
- * 0 = cacheline
- * 1 = page
- * 2 = (logical) bank
- * 3 = superbank (only if CS interleaving is enabled)
- */
- popts->memctl_interleaving_mode = 0;
-
- /*
- * 0: cacheline: bit 30 of the 36-bit physical addr selects the memctl
- * 1: page: bit to the left of the column bits selects the memctl
- * 2: bank: bit to the left of the bank bits selects the memctl
- * 3: superbank: bit to the left of the chip select selects the memctl
- *
- * NOTE: ba_intlv (rank interleaving) is independent of memory
- * controller interleaving; it is only within a memory controller.
- * Must use superbank interleaving if rank interleaving is used and
- * memory controller interleaving is enabled.
- */
-
- /*
- * 0 = no
- * 0x40 = CS0,CS1
- * 0x20 = CS2,CS3
- * 0x60 = CS0,CS1 + CS2,CS3
- * 0x04 = CS0,CS1,CS2,CS3
- */
- popts->ba_intlv_ctl = 0;
-
- /* Memory Organization Parameters */
- popts->registered_dimm_en = all_dimms_registered;
-
- /* Operational Mode Paramters */
-
- /* Pick ECC modes */
- popts->ecc_mode = 0; /* 0 = disabled, 1 = enabled */
-#ifdef CONFIG_DDR_ECC
- if (hwconfig_sub_f("fsl_ddr", "ecc", buf)) {
- if (hwconfig_subarg_cmp_f("fsl_ddr", "ecc", "on", buf))
- popts->ecc_mode = 1;
- } else
- popts->ecc_mode = 1;
-#endif
- popts->ecc_init_using_memctl = 1; /* 0 = use DMA, 1 = use memctl */
-
- /*
- * Choose DQS config
- * 0 for DDR1
- * 1 for DDR2
- */
-#if defined(CONFIG_FSL_DDR1)
- popts->dqs_config = 0;
-#elif defined(CONFIG_FSL_DDR2) || defined(CONFIG_FSL_DDR3)
- popts->dqs_config = 1;
-#endif
-
- /* Choose self-refresh during sleep. */
- popts->self_refresh_in_sleep = 1;
-
- /* Choose dynamic power management mode. */
- popts->dynamic_power = 0;
-
- /*
- * check first dimm for primary sdram width
- * presuming all dimms are similar
- * 0 = 64-bit, 1 = 32-bit, 2 = 16-bit
- */
-#if defined(CONFIG_FSL_DDR1) || defined(CONFIG_FSL_DDR2)
- if (pdimm[0].n_ranks != 0) {
- if ((pdimm[0].data_width >= 64) && \
- (pdimm[0].data_width <= 72))
- popts->data_bus_width = 0;
- else if ((pdimm[0].data_width >= 32) || \
- (pdimm[0].data_width <= 40))
- popts->data_bus_width = 1;
- else {
- panic("Error: data width %u is invalid!\n",
- pdimm[0].data_width);
- }
- }
-#else
- if (pdimm[0].n_ranks != 0) {
- if (pdimm[0].primary_sdram_width == 64)
- popts->data_bus_width = 0;
- else if (pdimm[0].primary_sdram_width == 32)
- popts->data_bus_width = 1;
- else if (pdimm[0].primary_sdram_width == 16)
- popts->data_bus_width = 2;
- else {
- panic("Error: primary sdram width %u is invalid!\n",
- pdimm[0].primary_sdram_width);
- }
- }
-#endif
-
- popts->x4_en = (pdimm[0].device_width == 4) ? 1 : 0;
-
- /* Choose burst length. */
-#if defined(CONFIG_FSL_DDR3)
-#if defined(CONFIG_E500MC)
- popts->otf_burst_chop_en = 0; /* on-the-fly burst chop disable */
- popts->burst_length = DDR_BL8; /* Fixed 8-beat burst len */
-#else
- if ((popts->data_bus_width == 1) || (popts->data_bus_width == 2)) {
- /* 32-bit or 16-bit bus */
- popts->otf_burst_chop_en = 0;
- popts->burst_length = DDR_BL8;
- } else {
- popts->otf_burst_chop_en = 1; /* on-the-fly burst chop */
- popts->burst_length = DDR_OTF; /* on-the-fly BC4 and BL8 */
- }
-#endif
-#else
- popts->burst_length = DDR_BL4; /* has to be 4 for DDR2 */
-#endif
-
- /* Choose ddr controller address mirror mode */
-#if defined(CONFIG_FSL_DDR3)
- popts->mirrored_dimm = pdimm[0].mirrored_dimm;
-#endif
-
- /* Global Timing Parameters. */
- debug("mclk_ps = %u ps\n", get_memory_clk_period_ps());
-
- /* Pick a caslat override. */
- popts->cas_latency_override = 0;
- popts->cas_latency_override_value = 3;
- if (popts->cas_latency_override) {
- debug("using caslat override value = %u\n",
- popts->cas_latency_override_value);
- }
-
- /* Decide whether to use the computed derated latency */
- popts->use_derated_caslat = 0;
-
- /* Choose an additive latency. */
- popts->additive_latency_override = 0;
- popts->additive_latency_override_value = 3;
- if (popts->additive_latency_override) {
- debug("using additive latency override value = %u\n",
- popts->additive_latency_override_value);
- }
-
- /*
- * 2T_EN setting
- *
- * Factors to consider for 2T_EN:
- * - number of DIMMs installed
- * - number of components, number of active ranks
- * - how much time you want to spend playing around
- */
- popts->twot_en = 0;
- popts->threet_en = 0;
-
- /* for RDIMM, address parity enable */
- popts->ap_en = 1;
-
- /*
- * BSTTOPRE precharge interval
- *
- * Set this to 0 for global auto precharge
- *
- * FIXME: Should this be configured in picoseconds?
- * Why it should be in ps: better understanding of this
- * relative to actual DRAM timing parameters such as tRAS.
- * e.g. tRAS(min) = 40 ns
- */
- popts->bstopre = 0x100;
-
- /* Minimum CKE pulse width -- tCKE(MIN) */
- popts->tcke_clock_pulse_width_ps
- = mclk_to_picos(FSL_DDR_MIN_TCKE_PULSE_WIDTH_DDR);
-
- /*
- * Window for four activates -- tFAW
- *
- * FIXME: UM: applies only to DDR2/DDR3 with eight logical banks only
- * FIXME: varies depending upon number of column addresses or data
- * FIXME: width, was considering looking at pdimm->primary_sdram_width
- */
-#if defined(CONFIG_FSL_DDR1)
- popts->tfaw_window_four_activates_ps = mclk_to_picos(1);
-
-#elif defined(CONFIG_FSL_DDR2)
- /*
- * x4/x8; some datasheets have 35000
- * x16 wide columns only? Use 50000?
- */
- popts->tfaw_window_four_activates_ps = 37500;
-
-#elif defined(CONFIG_FSL_DDR3)
- popts->tfaw_window_four_activates_ps = pdimm[0].tfaw_ps;
-#endif
- popts->zq_en = 0;
- popts->wrlvl_en = 0;
-#if defined(CONFIG_FSL_DDR3)
- /*
- * due to ddr3 dimm is fly-by topology
- * we suggest to enable write leveling to
- * meet the tQDSS under different loading.
- */
- popts->wrlvl_en = 1;
- popts->zq_en = 1;
- popts->wrlvl_override = 0;
-#endif
-
- /*
- * Check interleaving configuration from environment.
- * Please refer to doc/README.fsl-ddr for the detail.
- *
- * If memory controller interleaving is enabled, then the data
- * bus widths must be programmed identically for all memory controllers.
- *
- * XXX: Attempt to set all controllers to the same chip select
- * interleaving mode. It will do a best effort to get the
- * requested ranks interleaved together such that the result
- * should be a subset of the requested configuration.
- */
-#if (CONFIG_NUM_DDR_CONTROLLERS > 1)
- if (!hwconfig_sub_f("fsl_ddr", "ctlr_intlv", buf))
- goto done;
-
- if (pdimm[0].n_ranks == 0) {
- printf("There is no rank on CS0 for controller %d.\n", ctrl_num);
- popts->memctl_interleaving = 0;
- goto done;
- }
- popts->memctl_interleaving = 1;
- /*
- * test null first. if CONFIG_HWCONFIG is not defined
- * hwconfig_arg_cmp returns non-zero
- */
- if (hwconfig_subarg_cmp_f("fsl_ddr", "ctlr_intlv",
- "null", buf)) {
- popts->memctl_interleaving = 0;
- debug("memory controller interleaving disabled.\n");
- } else if (hwconfig_subarg_cmp_f("fsl_ddr",
- "ctlr_intlv",
- "cacheline", buf)) {
- popts->memctl_interleaving_mode =
- ((CONFIG_NUM_DDR_CONTROLLERS == 3) && ctrl_num == 2) ?
- 0 : FSL_DDR_CACHE_LINE_INTERLEAVING;
- popts->memctl_interleaving =
- ((CONFIG_NUM_DDR_CONTROLLERS == 3) && ctrl_num == 2) ?
- 0 : 1;
- } else if (hwconfig_subarg_cmp_f("fsl_ddr",
- "ctlr_intlv",
- "page", buf)) {
- popts->memctl_interleaving_mode =
- ((CONFIG_NUM_DDR_CONTROLLERS == 3) && ctrl_num == 2) ?
- 0 : FSL_DDR_PAGE_INTERLEAVING;
- popts->memctl_interleaving =
- ((CONFIG_NUM_DDR_CONTROLLERS == 3) && ctrl_num == 2) ?
- 0 : 1;
- } else if (hwconfig_subarg_cmp_f("fsl_ddr",
- "ctlr_intlv",
- "bank", buf)) {
- popts->memctl_interleaving_mode =
- ((CONFIG_NUM_DDR_CONTROLLERS == 3) && ctrl_num == 2) ?
- 0 : FSL_DDR_BANK_INTERLEAVING;
- popts->memctl_interleaving =
- ((CONFIG_NUM_DDR_CONTROLLERS == 3) && ctrl_num == 2) ?
- 0 : 1;
- } else if (hwconfig_subarg_cmp_f("fsl_ddr",
- "ctlr_intlv",
- "superbank", buf)) {
- popts->memctl_interleaving_mode =
- ((CONFIG_NUM_DDR_CONTROLLERS == 3) && ctrl_num == 2) ?
- 0 : FSL_DDR_SUPERBANK_INTERLEAVING;
- popts->memctl_interleaving =
- ((CONFIG_NUM_DDR_CONTROLLERS == 3) && ctrl_num == 2) ?
- 0 : 1;
-#if (CONFIG_NUM_DDR_CONTROLLERS == 3)
- } else if (hwconfig_subarg_cmp_f("fsl_ddr",
- "ctlr_intlv",
- "3way_1KB", buf)) {
- popts->memctl_interleaving_mode =
- FSL_DDR_3WAY_1KB_INTERLEAVING;
- } else if (hwconfig_subarg_cmp_f("fsl_ddr",
- "ctlr_intlv",
- "3way_4KB", buf)) {
- popts->memctl_interleaving_mode =
- FSL_DDR_3WAY_4KB_INTERLEAVING;
- } else if (hwconfig_subarg_cmp_f("fsl_ddr",
- "ctlr_intlv",
- "3way_8KB", buf)) {
- popts->memctl_interleaving_mode =
- FSL_DDR_3WAY_8KB_INTERLEAVING;
-#elif (CONFIG_NUM_DDR_CONTROLLERS == 4)
- } else if (hwconfig_subarg_cmp_f("fsl_ddr",
- "ctlr_intlv",
- "4way_1KB", buf)) {
- popts->memctl_interleaving_mode =
- FSL_DDR_4WAY_1KB_INTERLEAVING;
- } else if (hwconfig_subarg_cmp_f("fsl_ddr",
- "ctlr_intlv",
- "4way_4KB", buf)) {
- popts->memctl_interleaving_mode =
- FSL_DDR_4WAY_4KB_INTERLEAVING;
- } else if (hwconfig_subarg_cmp_f("fsl_ddr",
- "ctlr_intlv",
- "4way_8KB", buf)) {
- popts->memctl_interleaving_mode =
- FSL_DDR_4WAY_8KB_INTERLEAVING;
-#endif
- } else {
- popts->memctl_interleaving = 0;
- printf("hwconfig has unrecognized parameter for ctlr_intlv.\n");
- }
-done:
-#endif
- if ((hwconfig_sub_f("fsl_ddr", "bank_intlv", buf)) &&
- (CONFIG_CHIP_SELECTS_PER_CTRL > 1)) {
- /* test null first. if CONFIG_HWCONFIG is not defined,
- * hwconfig_subarg_cmp_f returns non-zero */
- if (hwconfig_subarg_cmp_f("fsl_ddr", "bank_intlv",
- "null", buf))
- debug("bank interleaving disabled.\n");
- else if (hwconfig_subarg_cmp_f("fsl_ddr", "bank_intlv",
- "cs0_cs1", buf))
- popts->ba_intlv_ctl = FSL_DDR_CS0_CS1;
- else if (hwconfig_subarg_cmp_f("fsl_ddr", "bank_intlv",
- "cs2_cs3", buf))
- popts->ba_intlv_ctl = FSL_DDR_CS2_CS3;
- else if (hwconfig_subarg_cmp_f("fsl_ddr", "bank_intlv",
- "cs0_cs1_and_cs2_cs3", buf))
- popts->ba_intlv_ctl = FSL_DDR_CS0_CS1_AND_CS2_CS3;
- else if (hwconfig_subarg_cmp_f("fsl_ddr", "bank_intlv",
- "cs0_cs1_cs2_cs3", buf))
- popts->ba_intlv_ctl = FSL_DDR_CS0_CS1_CS2_CS3;
- else if (hwconfig_subarg_cmp_f("fsl_ddr", "bank_intlv",
- "auto", buf))
- popts->ba_intlv_ctl = auto_bank_intlv(pdimm);
- else
- printf("hwconfig has unrecognized parameter for bank_intlv.\n");
- switch (popts->ba_intlv_ctl & FSL_DDR_CS0_CS1_CS2_CS3) {
- case FSL_DDR_CS0_CS1_CS2_CS3:
-#if (CONFIG_DIMM_SLOTS_PER_CTLR == 1)
- if (pdimm[0].n_ranks < 4) {
- popts->ba_intlv_ctl = 0;
- printf("Not enough bank(chip-select) for "
- "CS0+CS1+CS2+CS3 on controller %d, "
- "interleaving disabled!\n", ctrl_num);
- }
-#elif (CONFIG_DIMM_SLOTS_PER_CTLR == 2)
-#ifdef CONFIG_FSL_DDR_FIRST_SLOT_QUAD_CAPABLE
- if (pdimm[0].n_ranks == 4)
- break;
-#endif
- if ((pdimm[0].n_ranks < 2) && (pdimm[1].n_ranks < 2)) {
- popts->ba_intlv_ctl = 0;
- printf("Not enough bank(chip-select) for "
- "CS0+CS1+CS2+CS3 on controller %d, "
- "interleaving disabled!\n", ctrl_num);
- }
- if (pdimm[0].capacity != pdimm[1].capacity) {
- popts->ba_intlv_ctl = 0;
- printf("Not identical DIMM size for "
- "CS0+CS1+CS2+CS3 on controller %d, "
- "interleaving disabled!\n", ctrl_num);
- }
-#endif
- break;
- case FSL_DDR_CS0_CS1:
- if (pdimm[0].n_ranks < 2) {
- popts->ba_intlv_ctl = 0;
- printf("Not enough bank(chip-select) for "
- "CS0+CS1 on controller %d, "
- "interleaving disabled!\n", ctrl_num);
- }
- break;
- case FSL_DDR_CS2_CS3:
-#if (CONFIG_DIMM_SLOTS_PER_CTLR == 1)
- if (pdimm[0].n_ranks < 4) {
- popts->ba_intlv_ctl = 0;
- printf("Not enough bank(chip-select) for CS2+CS3 "
- "on controller %d, interleaving disabled!\n", ctrl_num);
- }
-#elif (CONFIG_DIMM_SLOTS_PER_CTLR == 2)
- if (pdimm[1].n_ranks < 2) {
- popts->ba_intlv_ctl = 0;
- printf("Not enough bank(chip-select) for CS2+CS3 "
- "on controller %d, interleaving disabled!\n", ctrl_num);
- }
-#endif
- break;
- case FSL_DDR_CS0_CS1_AND_CS2_CS3:
-#if (CONFIG_DIMM_SLOTS_PER_CTLR == 1)
- if (pdimm[0].n_ranks < 4) {
- popts->ba_intlv_ctl = 0;
- printf("Not enough bank(CS) for CS0+CS1 and "
- "CS2+CS3 on controller %d, "
- "interleaving disabled!\n", ctrl_num);
- }
-#elif (CONFIG_DIMM_SLOTS_PER_CTLR == 2)
- if ((pdimm[0].n_ranks < 2) || (pdimm[1].n_ranks < 2)) {
- popts->ba_intlv_ctl = 0;
- printf("Not enough bank(CS) for CS0+CS1 and "
- "CS2+CS3 on controller %d, "
- "interleaving disabled!\n", ctrl_num);
- }
-#endif
- break;
- default:
- popts->ba_intlv_ctl = 0;
- break;
- }
- }
-
- if (hwconfig_sub_f("fsl_ddr", "addr_hash", buf)) {
- if (hwconfig_subarg_cmp_f("fsl_ddr", "addr_hash", "null", buf))
- popts->addr_hash = 0;
- else if (hwconfig_subarg_cmp_f("fsl_ddr", "addr_hash",
- "true", buf))
- popts->addr_hash = 1;
- }
-
- if (pdimm[0].n_ranks == 4)
- popts->quad_rank_present = 1;
-
- ddr_freq = get_ddr_freq(0) / 1000000;
- if (popts->registered_dimm_en) {
- popts->rcw_override = 1;
- popts->rcw_1 = 0x000a5a00;
- if (ddr_freq <= 800)
- popts->rcw_2 = 0x00000000;
- else if (ddr_freq <= 1066)
- popts->rcw_2 = 0x00100000;
- else if (ddr_freq <= 1333)
- popts->rcw_2 = 0x00200000;
- else
- popts->rcw_2 = 0x00300000;
- }
-
- fsl_ddr_board_options(popts, pdimm, ctrl_num);
-
- return 0;
-}
-
-void check_interleaving_options(fsl_ddr_info_t *pinfo)
-{
- int i, j, k, check_n_ranks, intlv_invalid = 0;
- unsigned int check_intlv, check_n_row_addr, check_n_col_addr;
- unsigned long long check_rank_density;
- struct dimm_params_s *dimm;
- /*
- * Check if all controllers are configured for memory
- * controller interleaving. Identical dimms are recommended. At least
- * the size, row and col address should be checked.
- */
- j = 0;
- check_n_ranks = pinfo->dimm_params[0][0].n_ranks;
- check_rank_density = pinfo->dimm_params[0][0].rank_density;
- check_n_row_addr = pinfo->dimm_params[0][0].n_row_addr;
- check_n_col_addr = pinfo->dimm_params[0][0].n_col_addr;
- check_intlv = pinfo->memctl_opts[0].memctl_interleaving_mode;
- for (i = 0; i < CONFIG_NUM_DDR_CONTROLLERS; i++) {
- dimm = &pinfo->dimm_params[i][0];
- if (!pinfo->memctl_opts[i].memctl_interleaving) {
- continue;
- } else if (((check_rank_density != dimm->rank_density) ||
- (check_n_ranks != dimm->n_ranks) ||
- (check_n_row_addr != dimm->n_row_addr) ||
- (check_n_col_addr != dimm->n_col_addr) ||
- (check_intlv !=
- pinfo->memctl_opts[i].memctl_interleaving_mode))){
- intlv_invalid = 1;
- break;
- } else {
- j++;
- }
-
- }
- if (intlv_invalid) {
- for (i = 0; i < CONFIG_NUM_DDR_CONTROLLERS; i++)
- pinfo->memctl_opts[i].memctl_interleaving = 0;
- printf("Not all DIMMs are identical. "
- "Memory controller interleaving disabled.\n");
- } else {
- switch (check_intlv) {
- case FSL_DDR_CACHE_LINE_INTERLEAVING:
- case FSL_DDR_PAGE_INTERLEAVING:
- case FSL_DDR_BANK_INTERLEAVING:
- case FSL_DDR_SUPERBANK_INTERLEAVING:
- if (3 == CONFIG_NUM_DDR_CONTROLLERS)
- k = 2;
- else
- k = CONFIG_NUM_DDR_CONTROLLERS;
- break;
- case FSL_DDR_3WAY_1KB_INTERLEAVING:
- case FSL_DDR_3WAY_4KB_INTERLEAVING:
- case FSL_DDR_3WAY_8KB_INTERLEAVING:
- case FSL_DDR_4WAY_1KB_INTERLEAVING:
- case FSL_DDR_4WAY_4KB_INTERLEAVING:
- case FSL_DDR_4WAY_8KB_INTERLEAVING:
- default:
- k = CONFIG_NUM_DDR_CONTROLLERS;
- break;
- }
- debug("%d of %d controllers are interleaving.\n", j, k);
- if (j && (j != k)) {
- for (i = 0; i < CONFIG_NUM_DDR_CONTROLLERS; i++)
- pinfo->memctl_opts[i].memctl_interleaving = 0;
- printf("Not all controllers have compatible "
- "interleaving mode. All disabled.\n");
- }
- }
- debug("Checking interleaving options completed\n");
-}
-
-int fsl_use_spd(void)
-{
- int use_spd = 0;
-
-#ifdef CONFIG_DDR_SPD
- char buffer[HWCONFIG_BUFFER_SIZE];
- char *buf = NULL;
-
- /*
- * Extract hwconfig from environment since we have not properly setup
- * the environment but need it for ddr config params
- */
- if (getenv_f("hwconfig", buffer, sizeof(buffer)) > 0)
- buf = buffer;
-
- /* if hwconfig is not enabled, or "sdram" is not defined, use spd */
- if (hwconfig_sub_f("fsl_ddr", "sdram", buf)) {
- if (hwconfig_subarg_cmp_f("fsl_ddr", "sdram", "spd", buf))
- use_spd = 1;
- else if (hwconfig_subarg_cmp_f("fsl_ddr", "sdram",
- "fixed", buf))
- use_spd = 0;
- else
- use_spd = 1;
- } else
- use_spd = 1;
-#endif
-
- return use_spd;
-}
diff --git a/arch/powerpc/cpu/mpc8xxx/ddr/util.c b/arch/powerpc/cpu/mpc8xxx/ddr/util.c
deleted file mode 100644
index acfe1f095f..0000000000
--- a/arch/powerpc/cpu/mpc8xxx/ddr/util.c
+++ /dev/null
@@ -1,264 +0,0 @@
-/*
- * Copyright 2008-2012 Freescale Semiconductor, Inc.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * Version 2 as published by the Free Software Foundation.
- */
-
-#include <common.h>
-#include <asm/fsl_law.h>
-#include <div64.h>
-
-#include "ddr.h"
-
-/* To avoid 64-bit full-divides, we factor this here */
-#define ULL_2E12 2000000000000ULL
-#define UL_5POW12 244140625UL
-#define UL_2POW13 (1UL << 13)
-
-#define ULL_8FS 0xFFFFFFFFULL
-
-/*
- * Round up mclk_ps to nearest 1 ps in memory controller code
- * if the error is 0.5ps or more.
- *
- * If an imprecise data rate is too high due to rounding error
- * propagation, compute a suitably rounded mclk_ps to compute
- * a working memory controller configuration.
- */
-unsigned int get_memory_clk_period_ps(void)
-{
- unsigned int data_rate = get_ddr_freq(0);
- unsigned int result;
-
- /* Round to nearest 10ps, being careful about 64-bit multiply/divide */
- unsigned long long rem, mclk_ps = ULL_2E12;
-
- /* Now perform the big divide, the result fits in 32-bits */
- rem = do_div(mclk_ps, data_rate);
- result = (rem >= (data_rate >> 1)) ? mclk_ps + 1 : mclk_ps;
-
- return result;
-}
-
-/* Convert picoseconds into DRAM clock cycles (rounding up if needed). */
-unsigned int picos_to_mclk(unsigned int picos)
-{
- unsigned long long clks, clks_rem;
- unsigned long data_rate = get_ddr_freq(0);
-
- /* Short circuit for zero picos */
- if (!picos)
- return 0;
-
- /* First multiply the time by the data rate (32x32 => 64) */
- clks = picos * (unsigned long long)data_rate;
- /*
- * Now divide by 5^12 and track the 32-bit remainder, then divide
- * by 2*(2^12) using shifts (and updating the remainder).
- */
- clks_rem = do_div(clks, UL_5POW12);
- clks_rem += (clks & (UL_2POW13-1)) * UL_5POW12;
- clks >>= 13;
-
- /* If we had a remainder greater than the 1ps error, then round up */
- if (clks_rem > data_rate)
- clks++;
-
- /* Clamp to the maximum representable value */
- if (clks > ULL_8FS)
- clks = ULL_8FS;
- return (unsigned int) clks;
-}
-
-unsigned int mclk_to_picos(unsigned int mclk)
-{
- return get_memory_clk_period_ps() * mclk;
-}
-
-void
-__fsl_ddr_set_lawbar(const common_timing_params_t *memctl_common_params,
- unsigned int law_memctl,
- unsigned int ctrl_num)
-{
- unsigned long long base = memctl_common_params->base_address;
- unsigned long long size = memctl_common_params->total_mem;
-
- /*
- * If no DIMMs on this controller, do not proceed any further.
- */
- if (!memctl_common_params->ndimms_present) {
- return;
- }
-
-#if !defined(CONFIG_PHYS_64BIT)
- if (base >= CONFIG_MAX_MEM_MAPPED)
- return;
- if ((base + size) >= CONFIG_MAX_MEM_MAPPED)
- size = CONFIG_MAX_MEM_MAPPED - base;
-#endif
- if (set_ddr_laws(base, size, law_memctl) < 0) {
- printf("%s: ERROR (ctrl #%d, TRGT ID=%x)\n", __func__, ctrl_num,
- law_memctl);
- return ;
- }
- debug("setup ddr law base = 0x%llx, size 0x%llx, TRGT_ID 0x%x\n",
- base, size, law_memctl);
-}
-
-__attribute__((weak, alias("__fsl_ddr_set_lawbar"))) void
-fsl_ddr_set_lawbar(const common_timing_params_t *memctl_common_params,
- unsigned int memctl_interleaved,
- unsigned int ctrl_num);
-
-void fsl_ddr_set_intl3r(const unsigned int granule_size)
-{
-#ifdef CONFIG_E6500
- u32 *mcintl3r = (void *) (CONFIG_SYS_IMMR + 0x18004);
- *mcintl3r = 0x80000000 | (granule_size & 0x1f);
- debug("Enable MCINTL3R with granule size 0x%x\n", granule_size);
-#endif
-}
-
-u32 fsl_ddr_get_intl3r(void)
-{
- u32 val = 0;
-#ifdef CONFIG_E6500
- u32 *mcintl3r = (void *) (CONFIG_SYS_IMMR + 0x18004);
- val = *mcintl3r;
-#endif
- return val;
-}
-
-void board_add_ram_info(int use_default)
-{
- ccsr_ddr_t *ddr = (void *)(CONFIG_SYS_MPC8xxx_DDR_ADDR);
-
-#if defined(CONFIG_E6500) && (CONFIG_NUM_DDR_CONTROLLERS == 3)
- u32 *mcintl3r = (void *) (CONFIG_SYS_IMMR + 0x18004);
-#endif
-#if (CONFIG_NUM_DDR_CONTROLLERS > 1)
- uint32_t cs0_config = in_be32(&ddr->cs0_config);
-#endif
- uint32_t sdram_cfg = in_be32(&ddr->sdram_cfg);
- int cas_lat;
-
-#if CONFIG_NUM_DDR_CONTROLLERS >= 2
- if (!(sdram_cfg & SDRAM_CFG_MEM_EN)) {
- ddr = (void __iomem *)CONFIG_SYS_MPC8xxx_DDR2_ADDR;
- sdram_cfg = in_be32(&ddr->sdram_cfg);
- }
-#endif
-#if CONFIG_NUM_DDR_CONTROLLERS >= 3
- if (!(sdram_cfg & SDRAM_CFG_MEM_EN)) {
- ddr = (void __iomem *)CONFIG_SYS_MPC8xxx_DDR3_ADDR;
- sdram_cfg = in_be32(&ddr->sdram_cfg);
- }
-#endif
- puts(" (DDR");
- switch ((sdram_cfg & SDRAM_CFG_SDRAM_TYPE_MASK) >>
- SDRAM_CFG_SDRAM_TYPE_SHIFT) {
- case SDRAM_TYPE_DDR1:
- puts("1");
- break;
- case SDRAM_TYPE_DDR2:
- puts("2");
- break;
- case SDRAM_TYPE_DDR3:
- puts("3");
- break;
- default:
- puts("?");
- break;
- }
-
- if (sdram_cfg & SDRAM_CFG_32_BE)
- puts(", 32-bit");
- else if (sdram_cfg & SDRAM_CFG_16_BE)
- puts(", 16-bit");
- else
- puts(", 64-bit");
-
- /* Calculate CAS latency based on timing cfg values */
- cas_lat = ((in_be32(&ddr->timing_cfg_1) >> 16) & 0xf) + 1;
- if ((in_be32(&ddr->timing_cfg_3) >> 12) & 1)
- cas_lat += (8 << 1);
- printf(", CL=%d", cas_lat >> 1);
- if (cas_lat & 0x1)
- puts(".5");
-
- if (sdram_cfg & SDRAM_CFG_ECC_EN)
- puts(", ECC on)");
- else
- puts(", ECC off)");
-
-#if (CONFIG_NUM_DDR_CONTROLLERS == 3)
-#ifdef CONFIG_E6500
- if (*mcintl3r & 0x80000000) {
- puts("\n");
- puts(" DDR Controller Interleaving Mode: ");
- switch (*mcintl3r & 0x1f) {
- case FSL_DDR_3WAY_1KB_INTERLEAVING:
- puts("3-way 1KB");
- break;
- case FSL_DDR_3WAY_4KB_INTERLEAVING:
- puts("3-way 4KB");
- break;
- case FSL_DDR_3WAY_8KB_INTERLEAVING:
- puts("3-way 8KB");
- break;
- default:
- puts("3-way UNKNOWN");
- break;
- }
- }
-#endif
-#endif
-#if (CONFIG_NUM_DDR_CONTROLLERS >= 2)
- if (cs0_config & 0x20000000) {
- puts("\n");
- puts(" DDR Controller Interleaving Mode: ");
-
- switch ((cs0_config >> 24) & 0xf) {
- case FSL_DDR_CACHE_LINE_INTERLEAVING:
- puts("cache line");
- break;
- case FSL_DDR_PAGE_INTERLEAVING:
- puts("page");
- break;
- case FSL_DDR_BANK_INTERLEAVING:
- puts("bank");
- break;
- case FSL_DDR_SUPERBANK_INTERLEAVING:
- puts("super-bank");
- break;
- default:
- puts("invalid");
- break;
- }
- }
-#endif
-
- if ((sdram_cfg >> 8) & 0x7f) {
- puts("\n");
- puts(" DDR Chip-Select Interleaving Mode: ");
- switch(sdram_cfg >> 8 & 0x7f) {
- case FSL_DDR_CS0_CS1_CS2_CS3:
- puts("CS0+CS1+CS2+CS3");
- break;
- case FSL_DDR_CS0_CS1:
- puts("CS0+CS1");
- break;
- case FSL_DDR_CS2_CS3:
- puts("CS2+CS3");
- break;
- case FSL_DDR_CS0_CS1_AND_CS2_CS3:
- puts("CS0+CS1 and CS2+CS3");
- break;
- default:
- puts("invalid");
- break;
- }
- }
-}