Merge branch 'master' of git://git.denx.de/u-boot

Signed-off-by: Stefano Babic <sbabic@denx.de>

173 files changed, 2989 insertions, 426 deletions

diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index d7a9b11c76..220022bcd9 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -126,6 +126,17 @@ config ENABLE_ARM_SOC_BOOT0_HOOK
 	  ARM_SOC_BOOT0_HOOK which contains the required assembler
 	  preprocessor code.
 
+config ARCH_OMAP2
+	bool
+	select CPU_V7
+	select SUPPORT_SPL
+
+config ARM64_SUPPORT_AARCH32
+	bool "ARM64 system support AArch32 execution state"
+	default y if ARM64 && !TARGET_THUNDERX_88XX
+	help
+	  This ARM64 system supports AArch32 execution state.
+
 choice
 	prompt "Target select"
 	default TARGET_HIKEY
@@ -327,71 +338,61 @@ config TARGET_VEXPRESS_CA9X4
 
 config TARGET_BRXRE1
 	bool "Support BRXRE1"
-	select CPU_V7
-	select SUPPORT_SPL
+	select ARCH_OMAP2
 
 config TARGET_BRPPT1
 	bool "Support BRPPT1"
-	select CPU_V7
-	select SUPPORT_SPL
+	select ARCH_OMAP2
 
 config TARGET_DRACO
 	bool "Support draco"
-	select CPU_V7
-	select SUPPORT_SPL
+	select ARCH_OMAP2
 	select DM
 	select DM_SERIAL
 	select DM_GPIO
 
 config TARGET_THUBAN
 	bool "Support thuban"
-	select CPU_V7
-	select SUPPORT_SPL
+	select ARCH_OMAP2
 	select DM
 	select DM_SERIAL
 	select DM_GPIO
 
 config TARGET_RASTABAN
 	bool "Support rastaban"
-	select CPU_V7
-	select SUPPORT_SPL
+	select ARCH_OMAP2
 	select DM
 	select DM_SERIAL
 	select DM_GPIO
 
 config TARGET_ETAMIN
 	bool "Support etamin"
-	select CPU_V7
-	select SUPPORT_SPL
+	select ARCH_OMAP2
 	select DM
 	select DM_SERIAL
 	select DM_GPIO
 
 config TARGET_PXM2
 	bool "Support pxm2"
-	select CPU_V7
-	select SUPPORT_SPL
+	select ARCH_OMAP2
 	select DM
 	select DM_SERIAL
 	select DM_GPIO
 
 config TARGET_RUT
 	bool "Support rut"
-	select CPU_V7
-	select SUPPORT_SPL
+	select ARCH_OMAP2
 	select DM
 	select DM_SERIAL
 	select DM_GPIO
 
 config TARGET_TI814X_EVM
 	bool "Support ti814x_evm"
-	select CPU_V7
-	select SUPPORT_SPL
+	select ARCH_OMAP2
 
 config TARGET_TI816X_EVM
 	bool "Support ti816x_evm"
-	select CPU_V7
-	select SUPPORT_SPL
+	select ARCH_OMAP2
 
 config TARGET_BCM23550_W1D
 	bool "Support bcm23550_w1d"
@@ -486,25 +487,21 @@ config TARGET_MX53SMD
 
 config OMAP34XX
 	bool "OMAP34XX SoC"
-	select CPU_V7
-	select SUPPORT_SPL
+	select ARCH_OMAP2
 	select USE_TINY_PRINTF
 
 config OMAP44XX
 	bool "OMAP44XX SoC"
-	select CPU_V7
-	select SUPPORT_SPL
+	select ARCH_OMAP2
 	select USE_TINY_PRINTF
 
 config OMAP54XX
 	bool "OMAP54XX SoC"
-	select CPU_V7
-	select SUPPORT_SPL
+	select ARCH_OMAP2
 
 config AM43XX
 	bool "AM43XX SoC"
-	select CPU_V7
-	select SUPPORT_SPL
+	select ARCH_OMAP2
 	help
 	  Support for AM43xx SOC from Texas Instruments.
 	  The AM43xx high performance SOC features a Cortex-A9
@@ -514,8 +511,7 @@ config AM43XX
 
 config AM33XX
 	bool "AM33XX SoC"
-	select CPU_V7
-	select SUPPORT_SPL
+	select ARCH_OMAP2
 	help
 	  Support for AM335x SOC from Texas Instruments.
 	  The AM335x high performance SOC features a Cortex-A8
@@ -554,29 +550,28 @@ config ARCH_SOCFPGA
 
 config TARGET_CM_T43
 	bool "Support cm_t43"
-	select CPU_V7
-	select SUPPORT_SPL
+	select ARCH_OMAP2
 
 config ARCH_SUNXI
 	bool "Support sunxi (Allwinner) SoCs"
 	select CMD_GPIO
 	select CMD_MMC if MMC
-	select CMD_USB
+	select CMD_USB if DISTRO_DEFAULTS
 	select DM
 	select DM_ETH
 	select DM_GPIO
 	select DM_KEYBOARD
 	select DM_SERIAL
-	select DM_USB
+	select DM_USB if DISTRO_DEFAULTS
 	select OF_BOARD_SETUP
 	select OF_CONTROL
 	select OF_SEPARATE
 	select SPL_STACK_R if SUPPORT_SPL
 	select SPL_SYS_MALLOC_SIMPLE if SUPPORT_SPL
 	select SYS_NS16550
-	select USB
-	select USB_STORAGE
-	select USB_KEYBOARD
+	select USB if DISTRO_DEFAULTS
+	select USB_STORAGE if DISTRO_DEFAULTS
+	select USB_KEYBOARD if DISTRO_DEFAULTS
 	select USE_TINY_PRINTF
 
 config TARGET_TS4800
@@ -761,6 +756,20 @@ config TARGET_LS1021ATWR
 	select ARCH_SUPPORT_PSCI
 	select LS1_DEEP_SLEEP
 
+config TARGET_LS1021AIOT
+	bool "Support ls1021aiot"
+	select CPU_V7
+	select CPU_V7_HAS_NONSEC
+	select CPU_V7_HAS_VIRT
+	select SUPPORT_SPL
+	select ARCH_LS1021A
+	select ARCH_SUPPORT_PSCI
+	help
+	  Support for Freescale LS1021AIOT platform.
+	  The LS1021A Freescale board (IOT) is a high-performance
+	  development platform that supports the QorIQ LS1021A
+	  Layerscape Architecture processor.
+
 config TARGET_LS1043AQDS
 	bool "Support ls1043aqds"
 	select ARCH_LS1043A
@@ -901,7 +910,7 @@ source "arch/arm/cpu/armv7/mx6/Kconfig"
 
 source "arch/arm/cpu/armv7/mx5/Kconfig"
 
-source "arch/arm/cpu/armv7/omap-common/Kconfig"
+source "arch/arm/mach-omap2/Kconfig"
 
 source "arch/arm/cpu/armv8/fsl-layerscape/Kconfig"
 
@@ -962,6 +971,7 @@ source "board/freescale/ls2080ardb/Kconfig"
 source "board/freescale/ls1021aqds/Kconfig"
 source "board/freescale/ls1043aqds/Kconfig"
 source "board/freescale/ls1021atwr/Kconfig"
+source "board/freescale/ls1021aiot/Kconfig"
 source "board/freescale/ls1046aqds/Kconfig"
 source "board/freescale/ls1043ardb/Kconfig"
 source "board/freescale/ls1046ardb/Kconfig"
diff --git a/arch/arm/Makefile b/arch/arm/Makefile
index 42093c2b5e..236debb452 100644
--- a/arch/arm/Makefile
+++ b/arch/arm/Makefile
@@ -63,6 +63,7 @@ machine-$(CONFIG_ARCH_MVEBU)		+= mvebu
 # TODO: rename CONFIG_TEGRA -> CONFIG_ARCH_TEGRA
 # TODO: rename CONFIG_ORION5X -> CONFIG_ARCH_ORION5X
 machine-$(CONFIG_ORION5X)		+= orion5x
+machine-$(CONFIG_ARCH_OMAP2)		+= omap2
 machine-$(CONFIG_ARCH_S5PC1XX)		+= s5pc1xx
 machine-$(CONFIG_ARCH_SUNXI)		+= sunxi
 machine-$(CONFIG_ARCH_SNAPDRAGON)	+= snapdragon
diff --git a/arch/arm/config.mk b/arch/arm/config.mk
index 542b897c31..008da39a6c 100644
--- a/arch/arm/config.mk
+++ b/arch/arm/config.mk
@@ -6,13 +6,16 @@
 #
 
 ifndef CONFIG_STANDALONE_LOAD_ADDR
-ifneq ($(CONFIG_OMAP_COMMON),)
+ifneq ($(CONFIG_ARCH_OMAP2),)
 CONFIG_STANDALONE_LOAD_ADDR = 0x80300000
 else
 CONFIG_STANDALONE_LOAD_ADDR = 0xc100000
 endif
 endif
 
+CFLAGS_NON_EFI := -fno-pic -ffixed-r9 -ffunction-sections -fdata-sections
+CFLAGS_EFI := -fpic -fshort-wchar
+
 LDFLAGS_FINAL += --gc-sections
 PLATFORM_RELFLAGS += -ffunction-sections -fdata-sections \
 		     -fno-common -ffixed-r9
@@ -148,3 +151,7 @@ ifneq ($(CONFIG_VF610),)
 ALL-y += u-boot.vyb
 endif
 endif
+
+EFI_LDS := elf_arm_efi.lds
+EFI_CRT0 := crt0_arm_efi.o
+EFI_RELOC := reloc_arm_efi.o
diff --git a/arch/arm/cpu/arm1176/start.S b/arch/arm/cpu/arm1176/start.S
index a602d4e693..7c00201dd0 100644
--- a/arch/arm/cpu/arm1176/start.S
+++ b/arch/arm/cpu/arm1176/start.S
@@ -16,6 +16,7 @@
 
 #include <asm-offsets.h>
 #include <config.h>
+#include <linux/linkage.h>
 
 #ifndef CONFIG_SYS_PHY_UBOOT_BASE
 #define CONFIG_SYS_PHY_UBOOT_BASE	CONFIG_SYS_UBOOT_BASE
@@ -37,6 +38,11 @@
 	.globl reset
 
 reset:
+	/* Allow the board to save important registers */
+	b	save_boot_params
+.globl	save_boot_params_ret
+save_boot_params_ret:
+
 	/*
 	 * set the cpu to SVC32 mode
 	 */
@@ -110,3 +116,7 @@ mmu_disable_phys:
 c_runtime_cpu_setup:
 
 	mov	pc, lr
+
+WEAK(save_boot_params)
+	b	save_boot_params_ret	/* back to my caller */
+ENDPROC(save_boot_params)
diff --git a/arch/arm/cpu/armv7/Makefile b/arch/arm/cpu/armv7/Makefile
index 4d3bc9440f..0e515a4603 100644
--- a/arch/arm/cpu/armv7/Makefile
+++ b/arch/arm/cpu/armv7/Makefile
@@ -23,14 +23,12 @@ obj-$(CONFIG_ARMV7_PSCI)	+= psci.o psci-common.o
 
 obj-$(CONFIG_IPROC) += iproc-common/
 obj-$(CONFIG_KONA) += kona-common/
-obj-$(CONFIG_OMAP_COMMON) += omap-common/
 obj-$(CONFIG_SYS_ARCH_TIMER) += arch_timer.o
 
 ifneq (,$(filter s5pc1xx exynos,$(SOC)))
 obj-y += s5p-common/
 endif
 
-obj-$(if $(filter am33xx,$(SOC)),y) += am33xx/
 obj-$(if $(filter bcm235xx,$(SOC)),y) += bcm235xx/
 obj-$(if $(filter bcm281xx,$(SOC)),y) += bcm281xx/
 obj-$(if $(filter bcmcygnus,$(SOC)),y) += bcmcygnus/
@@ -39,9 +37,6 @@ obj-$(if $(filter ls102xa,$(SOC)),y) += ls102xa/
 obj-$(if $(filter mx5,$(SOC)),y) += mx5/
 obj-$(CONFIG_MX6) += mx6/
 obj-$(CONFIG_MX7) += mx7/
-obj-$(CONFIG_OMAP34XX) += omap3/
-obj-$(CONFIG_OMAP44XX) += omap4/
-obj-$(CONFIG_OMAP54XX) += omap5/
 obj-$(CONFIG_RMOBILE) += rmobile/
 obj-$(if $(filter stv0991,$(SOC)),y) += stv0991/
 obj-$(CONFIG_ARCH_SUNXI) += sunxi/
diff --git a/arch/arm/cpu/armv7/omap3/config.mk b/arch/arm/cpu/armv7/omap3/config.mk
deleted file mode 100644
index ad44d63840..0000000000
--- a/arch/arm/cpu/armv7/omap3/config.mk
+++ /dev/null
@@ -1,15 +0,0 @@
-#
-# Copyright 2011 Linaro Limited
-#
-# (C) Copyright 2010
-# Texas Instruments, <www.ti.com>
-#
-# Aneesh V <aneesh@ti.com>
-#
-# SPDX-License-Identifier:	GPL-2.0+
-#
-ifdef CONFIG_SPL_BUILD
-ALL-y	+= MLO
-else
-ALL-y	+= u-boot.img
-endif
diff --git a/arch/arm/cpu/armv7/omap4/config.mk b/arch/arm/cpu/armv7/omap4/config.mk
deleted file mode 100644
index ad44d63840..0000000000
--- a/arch/arm/cpu/armv7/omap4/config.mk
+++ /dev/null
@@ -1,15 +0,0 @@
-#
-# Copyright 2011 Linaro Limited
-#
-# (C) Copyright 2010
-# Texas Instruments, <www.ti.com>
-#
-# Aneesh V <aneesh@ti.com>
-#
-# SPDX-License-Identifier:	GPL-2.0+
-#
-ifdef CONFIG_SPL_BUILD
-ALL-y	+= MLO
-else
-ALL-y	+= u-boot.img
-endif
diff --git a/arch/arm/cpu/armv7/omap5/config.mk b/arch/arm/cpu/armv7/omap5/config.mk
deleted file mode 100644
index 286ca8688d..0000000000
--- a/arch/arm/cpu/armv7/omap5/config.mk
+++ /dev/null
@@ -1,22 +0,0 @@
-#
-# Copyright 2011 Linaro Limited
-#
-# Aneesh V <annesh@ti.com>
-#
-# SPDX-License-Identifier:	GPL-2.0+
-#
-
-include  $(srctree)/$(CPUDIR)/omap-common/config_secure.mk
-
-ifdef CONFIG_SPL_BUILD
-ifeq ($(CONFIG_TI_SECURE_DEVICE),y)
-ALL-y	+= u-boot-spl_HS_MLO u-boot-spl_HS_X-LOADER
-else
-ALL-y	+= MLO
-endif
-else
-ifeq ($(CONFIG_TI_SECURE_DEVICE),y)
-ALL-$(CONFIG_SPL_LOAD_FIT) += u-boot_HS.img
-endif
-ALL-y	+= u-boot.img
-endif
diff --git a/arch/arm/cpu/armv8/Kconfig b/arch/arm/cpu/armv8/Kconfig
index cd2d9bb917..965a8d129c 100644
--- a/arch/arm/cpu/armv8/Kconfig
+++ b/arch/arm/cpu/armv8/Kconfig
@@ -28,8 +28,9 @@ config PSCI_RESET
 		   !TARGET_LS2080A_SIMU && !TARGET_LS2080AQDS && \
 		   !TARGET_LS2080ARDB && !TARGET_LS1012AQDS && \
 		   !TARGET_LS1012ARDB && !TARGET_LS1012AFRDM && \
-		   !TARGET_LS1043ARDB && !ARCH_UNIPHIER && !ARCH_SNAPDRAGON && \
-		   !TARGET_S32V234EVB
+		   !TARGET_LS1043ARDB && !TARGET_LS1043AQDS && \
+		   !TARGET_LS1046ARDB && !TARGET_LS1046AQDS && \
+		   !ARCH_UNIPHIER && !ARCH_SNAPDRAGON && !TARGET_S32V234EVB
 	help
 	  Most armv8 systems have PSCI support enabled in EL3, either through
 	  ARM Trusted Firmware or other firmware.
diff --git a/arch/arm/cpu/armv8/config.mk b/arch/arm/cpu/armv8/config.mk
index 685025881c..27b66d41b1 100644
--- a/arch/arm/cpu/armv8/config.mk
+++ b/arch/arm/cpu/armv8/config.mk
@@ -8,3 +8,7 @@ PLATFORM_RELFLAGS += -fno-common -ffixed-x18
 
 PF_NO_UNALIGNED := $(call cc-option, -mstrict-align)
 PLATFORM_CPPFLAGS += $(PF_NO_UNALIGNED)
+
+EFI_LDS := elf_aarch64_efi.lds
+EFI_CRT0 := crt0_aarch64_efi.o
+EFI_RELOC := reloc_aarch64_efi.o
diff --git a/arch/arm/cpu/armv8/fsl-layerscape/cpu.c b/arch/arm/cpu/armv8/fsl-layerscape/cpu.c
index b7a2e0c946..d6ee54642d 100644
--- a/arch/arm/cpu/armv8/fsl-layerscape/cpu.c
+++ b/arch/arm/cpu/armv8/fsl-layerscape/cpu.c
@@ -17,6 +17,7 @@
 #ifdef CONFIG_MP
 #include <asm/arch/mp.h>
 #endif
+#include <efi_loader.h>
 #include <fm_eth.h>
 #include <fsl-mc/fsl_mc.h>
 #ifdef CONFIG_FSL_ESDHC
@@ -190,7 +191,7 @@ void enable_caches(void)
 }
 #endif
 
-static inline u32 initiator_type(u32 cluster, int init_id)
+u32 initiator_type(u32 cluster, int init_id)
 {
 	struct ccsr_gur *gur = (void *)(CONFIG_SYS_FSL_GUTS_ADDR);
 	u32 idx = (cluster >> (init_id * 8)) & TP_CLUSTER_INIT_MASK;
@@ -305,12 +306,14 @@ u32 fsl_qoriq_core_to_type(unsigned int core)
 	return -1;      /* cannot identify the cluster */
 }
 
+#ifndef CONFIG_FSL_LSCH3
 uint get_svr(void)
 {
 	struct ccsr_gur __iomem *gur = (void *)(CONFIG_SYS_FSL_GUTS_ADDR);
 
 	return gur_in32(&gur->svr);
 }
+#endif
 
 #ifdef CONFIG_DISPLAY_CPUINFO
 int print_cpuinfo(void)
@@ -430,6 +433,7 @@ int timer_init(void)
 #endif
 #ifdef CONFIG_LS2080A
 	u32 __iomem *pctbenr = (u32 *)FSL_PMU_PCTBENR_OFFSET;
+	u32 svr_dev_id;
 #endif
 #ifdef COUNTER_FREQUENCY_REAL
 	unsigned long cntfrq = COUNTER_FREQUENCY_REAL;
@@ -452,6 +456,14 @@ int timer_init(void)
 	 * Register (PCTBENR), which allows the watchdog to operate.
 	 */
 	setbits_le32(pctbenr, 0xff);
+	/*
+	 * For LS2080A SoC and its personalities, timer controller
+	 * offset is different
+	 */
+	svr_dev_id = get_svr() >> 16;
+	if (svr_dev_id == SVR_DEV_LS2080A)
+		cntcr = (u32 *)SYS_FSL_LS2080A_LS2085A_TIMER_ADDR;
+
 #endif
 
 	/* Enable clock for timer
@@ -462,9 +474,10 @@ int timer_init(void)
 	return 0;
 }
 
-void reset_cpu(ulong addr)
+__efi_runtime_data u32 __iomem *rstcr = (u32 *)CONFIG_SYS_FSL_RST_ADDR;
+
+void __efi_runtime reset_cpu(ulong addr)
 {
-	u32 __iomem *rstcr = (u32 *)CONFIG_SYS_FSL_RST_ADDR;
 	u32 val;
 
 	/* Raise RESET_REQ_B */
@@ -473,6 +486,33 @@ void reset_cpu(ulong addr)
 	scfg_out32(rstcr, val);
 }
 
+#ifdef CONFIG_EFI_LOADER
+
+void __efi_runtime EFIAPI efi_reset_system(
+		       enum efi_reset_type reset_type,
+		       efi_status_t reset_status,
+		       unsigned long data_size, void *reset_data)
+{
+	switch (reset_type) {
+	case EFI_RESET_COLD:
+	case EFI_RESET_WARM:
+		reset_cpu(0);
+		break;
+	case EFI_RESET_SHUTDOWN:
+		/* Nothing we can do */
+		break;
+	}
+
+	while (1) { }
+}
+
+void efi_reset_system_init(void)
+{
+       efi_add_runtime_mmio(&rstcr, sizeof(*rstcr));
+}
+
+#endif
+
 phys_size_t board_reserve_ram_top(phys_size_t ram_size)
 {
 	phys_size_t ram_top = ram_size;
diff --git a/arch/arm/cpu/armv8/fsl-layerscape/cpu.h b/arch/arm/cpu/armv8/fsl-layerscape/cpu.h
index 8072f3ca6a..a05f8aad61 100644
--- a/arch/arm/cpu/armv8/fsl-layerscape/cpu.h
+++ b/arch/arm/cpu/armv8/fsl-layerscape/cpu.h
@@ -5,4 +5,5 @@
  */
 
 int fsl_qoriq_core_to_cluster(unsigned int core);
+u32 initiator_type(u32 cluster, int init_id);
 u32 cpu_mask(void);
diff --git a/arch/arm/cpu/armv8/fsl-layerscape/doc/README.qspi b/arch/arm/cpu/armv8/fsl-layerscape/doc/README.qspi
new file mode 100644
index 0000000000..de86f4b307
--- /dev/null
+++ b/arch/arm/cpu/armv8/fsl-layerscape/doc/README.qspi
@@ -0,0 +1,42 @@
+QSPI Boot source support Overview
+-------------------
+	1. LS1043A
+		LS1043AQDS
+	2. LS2080A
+		LS2080AQDS
+	3. LS1012A
+		LS1012AQDS
+		LS1012ARDB
+	4. LS1046A
+		LS1046AQDS
+		LS1046ARDB
+
+Booting from QSPI
+-------------------
+Booting from QSPI requires two images, RCW and u-boot-dtb.bin.
+The difference between QSPI boot RCW image and NOR boot image is the PBI
+command sequence for setting the boot location pointer. It's should point
+to the address for u-boot in QSPI flash.
+
+RCW image should be written to the beginning of QSPI flash device.
+Example of using u-boot command
+
+=> sf probe 0:0
+SF: Detected S25FL256S_64K with page size 256 Bytes, erase size 64 KiB, total 32 MiB
+=> sf erase 0 +<size of rcw image>
+SF: 65536 bytes @ 0x0 Erased: OK
+=> sf write <rcw image in memory> 0 <size of rcw image>
+SF: 164 bytes @ 0x0 Written: OK
+
+To get the QSPI image, build u-boot with QSPI config, for example,
+<board_name>_qspi_defconfig. The image needed is u-boot-dtb.bin.
+The u-boot image should be written to 0x10000(but 0x1000 for LS1043A, LS2080A).
+
+=> sf probe 0:0
+SF: Detected S25FL256S_64K with page size 256 Bytes, erase size 64 KiB, total 32 MiB
+=> sf erase 10000 +<size of u-boot image>
+SF: 589824 bytes @ 0x10000 Erased: OK
+=> sf write <u-boot image in memory> 10000 <size of u-boot image>
+SF: 580966 bytes @ 0x10000 Written: OK
+
+With these two images in QSPI flash device, the board can boot from QSPI.
diff --git a/arch/arm/cpu/armv8/fsl-layerscape/doc/README.soc b/arch/arm/cpu/armv8/fsl-layerscape/doc/README.soc
index f7b949aca2..c7496c02f5 100644
--- a/arch/arm/cpu/armv8/fsl-layerscape/doc/README.soc
+++ b/arch/arm/cpu/armv8/fsl-layerscape/doc/README.soc
@@ -4,6 +4,7 @@ SoC overview
 	2. LS2080A
 	3. LS1012A
 	4. LS1046A
+	5. LS2088A
 
 LS1043A
 ---------
@@ -169,3 +170,60 @@ The LS1046A SoC includes the following function and features:
    - Two DUARTs
    - Integrated flash controller (IFC) supporting NAND and NOR flash
  - QorIQ platform's trust architecture 2.1
+
+LS2088A
+--------
+The LS2088A integrated multicore processor combines eight ARM Cortex-A72
+processor cores with high-performance data path acceleration logic and network
+and peripheral bus interfaces required for networking, telecom/datacom,
+wireless infrastructure, and mil/aerospace applications.
+
+The LS2088A SoC includes the following function and features:
+
+ - Eight 64-bit ARM Cortex-A72 CPUs
+ - 1 MB platform cache with ECC
+ - Two 64-bit DDR4 SDRAM memory controllers with ECC and interleaving support
+ - One secondary 32-bit DDR4 SDRAM memory controller, intended for use by
+   the AIOP
+ - Data path acceleration architecture (DPAA2) incorporating acceleration for
+   the following functions:
+   - Packet parsing, classification, and distribution (WRIOP)
+   - Queue and Hardware buffer management for scheduling, packet sequencing, and
+     congestion management, buffer allocation and de-allocation (QBMan)
+   - Cryptography acceleration (SEC) at up to 10 Gbps
+   - RegEx pattern matching acceleration (PME) at up to 10 Gbps
+   - Decompression/compression acceleration (DCE) at up to 20 Gbps
+   - Accelerated I/O processing (AIOP) at up to 20 Gbps
+   - QDMA engine
+ - 16 SerDes lanes at up to 10.3125 GHz
+ - Ethernet interfaces
+   - Up to eight 10 Gbps Ethernet MACs
+   - Up to eight 1 / 2.5 Gbps Ethernet MACs
+ - High-speed peripheral interfaces
+   - Four PCIe 3.0 controllers, one supporting SR-IOV
+ - Additional peripheral interfaces
+   - Two serial ATA (SATA 3.0) controllers
+   - Two high-speed USB 3.0 controllers with integrated PHY
+   - Enhanced secure digital host controller (eSDXC/eMMC)
+   - Serial peripheral interface (SPI) controller
+   - Quad Serial Peripheral Interface (QSPI) Controller
+   - Four I2C controllers
+   - Two DUARTs
+   - Integrated flash controller (IFC 2.0) supporting NAND and NOR flash
+ - Support for hardware virtualization and partitioning enforcement
+ - QorIQ platform's trust architecture 3.0
+ - Service processor (SP) provides pre-boot initialization and secure-boot
+ capabilities
+
+LS2088A SoC has 3 more similar SoC personalities
+1)LS2048A, few difference w.r.t. LS2088A:
+       a) Four 64-bit ARM v8 Cortex-A72 CPUs
+
+2)LS2084A, few difference w.r.t. LS2088A:
+       a) No AIOP
+       b) No 32-bit DDR3 SDRAM memory
+       c) 5 * 1/10G + 5 *1G WRIOP
+       d) No L2 switch
+
+3)LS2044A, few difference w.r.t. LS2084A:
+       a) Four 64-bit ARM v8 Cortex-A72 CPUs
diff --git a/arch/arm/cpu/armv8/fsl-layerscape/fdt.c b/arch/arm/cpu/armv8/fsl-layerscape/fdt.c
index 1a8321b0e4..0dae5faad8 100644
--- a/arch/arm/cpu/armv8/fsl-layerscape/fdt.c
+++ b/arch/arm/cpu/armv8/fsl-layerscape/fdt.c
@@ -5,6 +5,7 @@
  */
 
 #include <common.h>
+#include <efi_loader.h>
 #include <libfdt.h>
 #include <fdt_support.h>
 #include <phy.h>
@@ -105,6 +106,11 @@ remove_psci_node:
 
 	fdt_add_mem_rsv(blob, (uintptr_t)&secondary_boot_code,
 			*boot_code_size);
+#if defined(CONFIG_EFI_LOADER) && !defined(CONFIG_SPL_BUILD)
+	efi_add_memory_map((uintptr_t)&secondary_boot_code,
+			   ALIGN(*boot_code_size, EFI_PAGE_SIZE) >> EFI_PAGE_SHIFT,
+			   EFI_RESERVED_MEMORY_TYPE, false);
+#endif
 }
 #endif
 
diff --git a/arch/arm/cpu/armv8/fsl-layerscape/lowlevel.S b/arch/arm/cpu/armv8/fsl-layerscape/lowlevel.S
index 5700b1fb65..72f2c11baf 100644
--- a/arch/arm/cpu/armv8/fsl-layerscape/lowlevel.S
+++ b/arch/arm/cpu/armv8/fsl-layerscape/lowlevel.S
@@ -13,6 +13,11 @@
 #ifdef CONFIG_MP
 #include <asm/arch/mp.h>
 #endif
+#ifdef CONFIG_FSL_LSCH3
+#include <asm/arch-fsl-layerscape/immap_lsch3.h>
+#include <asm/arch-fsl-layerscape/soc.h>
+#endif
+#include <asm/u-boot.h>
 
 ENTRY(lowlevel_init)
 	mov	x29, lr			/* Save LR */
@@ -137,6 +142,16 @@ ENTRY(lowlevel_init)
 #endif
 
 #ifdef CONFIG_FSL_TZASC_400
+	/*
+	 * LS2080 and its personalities does not support TZASC
+	 * So skip TZASC related operations
+	 */
+	bl	get_svr
+	lsr	w0, w0, #16
+	ldr	w1, =SVR_DEV_LS2080A
+	cmp	w0, w1
+	b.eq	1f
+
 	/* Set TZASC so that:
 	 * a. We use only Region0 whose global secure write/read is EN
 	 * b. We use only Region0 whose NSAID write/read is EN
@@ -145,26 +160,26 @@ ENTRY(lowlevel_init)
 	 * 	 placeholders.
 	 */
 	ldr	x1, =TZASC_GATE_KEEPER(0)
-	ldr	x0, [x1]		/* Filter 0 Gate Keeper Register */
-	orr	x0, x0, #1 << 0		/* Set open_request for Filter 0 */
-	str	x0, [x1]
+	ldr	w0, [x1]		/* Filter 0 Gate Keeper Register */
+	orr	w0, w0, #1 << 0		/* Set open_request for Filter 0 */
+	str	w0, [x1]
 
 	ldr	x1, =TZASC_GATE_KEEPER(1)
-	ldr	x0, [x1]		/* Filter 0 Gate Keeper Register */
-	orr	x0, x0, #1 << 0		/* Set open_request for Filter 0 */
-	str	x0, [x1]
+	ldr	w0, [x1]		/* Filter 0 Gate Keeper Register */
+	orr	w0, w0, #1 << 0		/* Set open_request for Filter 0 */
+	str	w0, [x1]
 
 	ldr	x1, =TZASC_REGION_ATTRIBUTES_0(0)
-	ldr	x0, [x1]		/* Region-0 Attributes Register */
-	orr	x0, x0, #1 << 31	/* Set Sec global write en, Bit[31] */
-	orr	x0, x0, #1 << 30	/* Set Sec global read en, Bit[30] */
-	str	x0, [x1]
+	ldr	w0, [x1]		/* Region-0 Attributes Register */
+	orr	w0, w0, #1 << 31	/* Set Sec global write en, Bit[31] */
+	orr	w0, w0, #1 << 30	/* Set Sec global read en, Bit[30] */
+	str	w0, [x1]
 
 	ldr	x1, =TZASC_REGION_ATTRIBUTES_0(1)
-	ldr	x0, [x1]		/* Region-1 Attributes Register */
-	orr	x0, x0, #1 << 31	/* Set Sec global write en, Bit[31] */
-	orr	x0, x0, #1 << 30	/* Set Sec global read en, Bit[30] */
-	str	x0, [x1]
+	ldr	w0, [x1]		/* Region-1 Attributes Register */
+	orr	w0, w0, #1 << 31	/* Set Sec global write en, Bit[31] */
+	orr	w0, w0, #1 << 30	/* Set Sec global read en, Bit[30] */
+	str	w0, [x1]
 
 	ldr	x1, =TZASC_REGION_ID_ACCESS_0(0)
 	ldr	w0, [x1]		/* Region-0 Access Register */
@@ -179,7 +194,7 @@ ENTRY(lowlevel_init)
 	isb
 	dsb	sy
 #endif
-
+1:
 #ifdef CONFIG_ARCH_LS1046A
 	/* Initialize the L2 RAM latency */
 	mrs   x1, S3_1_c11_c0_2
@@ -199,6 +214,12 @@ ENTRY(lowlevel_init)
 ENDPROC(lowlevel_init)
 
 #ifdef CONFIG_FSL_LSCH3
+	.globl get_svr
+get_svr:
+	ldr	x1, =FSL_LSCH3_SVR
+	ldr	w0, [x1]
+	ret
+
 hnf_pstate_poll:
 	/* x0 has the desired status, return 0 for success, 1 for timeout
 	 * clobber x1, x2, x3, x4, x6, x7
@@ -339,11 +360,6 @@ ENTRY(secondary_boot_func)
         gic_wait_for_interrupt_m x0, w1
 #endif
 
-	bl secondary_switch_to_el2
-#ifdef CONFIG_ARMV8_SWITCH_TO_EL1
-	bl secondary_switch_to_el1
-#endif
-
 slave_cpu:
 	wfe
 	ldr	x0, [x11]
@@ -356,19 +372,64 @@ slave_cpu:
 	tbz     x1, #25, cpu_is_le
 	rev     x0, x0                  /* BE to LE conversion */
 cpu_is_le:
-	br	x0			/* branch to the given address */
+	ldr	x5, [x11, #24]
+	ldr	x6, =IH_ARCH_DEFAULT
+	cmp	x6, x5
+	b.eq	1f
+
+#ifdef CONFIG_ARMV8_SWITCH_TO_EL1
+	adr	x3, secondary_switch_to_el1
+	ldr	x4, =ES_TO_AARCH64
+#else
+	ldr	x3, [x11]
+	ldr	x4, =ES_TO_AARCH32
+#endif
+	bl	secondary_switch_to_el2
+
+1:
+#ifdef CONFIG_ARMV8_SWITCH_TO_EL1
+	adr	x3, secondary_switch_to_el1
+#else
+	ldr	x3, [x11]
+#endif
+	ldr	x4, =ES_TO_AARCH64
+	bl	secondary_switch_to_el2
+
 ENDPROC(secondary_boot_func)
 
 ENTRY(secondary_switch_to_el2)
-	switch_el x0, 1f, 0f, 0f
+	switch_el x5, 1f, 0f, 0f
 0:	ret
-1:	armv8_switch_to_el2_m x0
+1:	armv8_switch_to_el2_m x3, x4, x5
 ENDPROC(secondary_switch_to_el2)
 
 ENTRY(secondary_switch_to_el1)
-	switch_el x0, 0f, 1f, 0f
+	mrs	x0, mpidr_el1
+	ubfm	x1, x0, #8, #15
+	ubfm	x2, x0, #0, #1
+	orr	x10, x2, x1, lsl #2	/* x10 has LPID */
+
+	lsl	x1, x10, #6
+	ldr	x0, =__spin_table
+	/* physical address of this cpus spin table element */
+	add	x11, x1, x0
+
+	ldr	x3, [x11]
+
+	ldr	x5, [x11, #24]
+	ldr	x6, =IH_ARCH_DEFAULT
+	cmp	x6, x5
+	b.eq	2f
+
+	ldr	x4, =ES_TO_AARCH32
+	bl	switch_to_el1
+
+2:	ldr	x4, =ES_TO_AARCH64
+
+switch_to_el1:
+	switch_el x5, 0f, 1f, 0f
 0:	ret
-1:	armv8_switch_to_el1_m x0, x1
+1:	armv8_switch_to_el1_m x3, x4, x5
 ENDPROC(secondary_switch_to_el1)
 
 	/* Ensure that the literals used by the secondary boot code are
diff --git a/arch/arm/cpu/armv8/fsl-layerscape/ls2080a_serdes.c b/arch/arm/cpu/armv8/fsl-layerscape/ls2080a_serdes.c
index eaa44a74c5..67d605e38b 100644
--- a/arch/arm/cpu/armv8/fsl-layerscape/ls2080a_serdes.c
+++ b/arch/arm/cpu/armv8/fsl-layerscape/ls2080a_serdes.c
@@ -34,6 +34,11 @@ static struct serdes_config serdes1_cfg_tbl[] = {
 	{0x33, {PCIE2, PCIE2, PCIE2, PCIE2, QSGMII_D, QSGMII_C, QSGMII_B,
 		QSGMII_A} },
 	{0x35, {QSGMII_D, QSGMII_C, QSGMII_B, PCIE2, XFI4, XFI3, XFI2, XFI1 } },
+	{0x39, {SGMII8, SGMII7, SGMII6, PCIE2, SGMII4, SGMII3, SGMII2,
+		PCIE1 } },
+	{0x4B, {PCIE2, PCIE2, PCIE2, PCIE2, XFI4, XFI3, XFI2, XFI1 } },
+	{0x4C, {XFI8, XFI7, XFI6, XFI5, PCIE1, PCIE1, PCIE1, PCIE1 } },
+	{0x4D, {SGMII8, SGMII7, PCIE2, PCIE2, SGMII4, SGMII3, PCIE1, PCIE1 } },
 		{}
 };
 static struct serdes_config serdes2_cfg_tbl[] = {
@@ -64,6 +69,7 @@ static struct serdes_config serdes2_cfg_tbl[] = {
 		SATA2 } },
 	{0x4A, {SGMII9, SGMII10, SGMII11, SGMII12, PCIE4, PCIE4, SATA1,
 		SATA2 } },
+	{0x57, {PCIE3, PCIE3, PCIE3, PCIE3, PCIE4, PCIE4, SGMII15, SGMII16 } },
 	{}
 };
 
diff --git a/arch/arm/cpu/armv8/fsl-layerscape/mp.c b/arch/arm/cpu/armv8/fsl-layerscape/mp.c
index f607c3900a..80fe1ade2e 100644
--- a/arch/arm/cpu/armv8/fsl-layerscape/mp.c
+++ b/arch/arm/cpu/armv8/fsl-layerscape/mp.c
@@ -9,6 +9,8 @@
 #include <asm/system.h>
 #include <asm/arch/mp.h>
 #include <asm/arch/soc.h>
+#include "cpu.h"
+#include <asm/arch-fsl-layerscape/soc.h>
 
 DECLARE_GLOBAL_DATA_PTR;
 
@@ -22,11 +24,49 @@ phys_addr_t determine_mp_bootpg(void)
 	return (phys_addr_t)&secondary_boot_code;
 }
 
+void update_os_arch_secondary_cores(uint8_t os_arch)
+{
+	u64 *table = get_spin_tbl_addr();
+	int i;
+
+	for (i = 1; i < CONFIG_MAX_CPUS; i++)
+		table[i * WORDS_PER_SPIN_TABLE_ENTRY +
+			SPIN_TABLE_ELEM_OS_ARCH_IDX] = os_arch;
+}
+
+#ifdef CONFIG_FSL_LSCH3
+void wake_secondary_core_n(int cluster, int core, int cluster_cores)
+{
+	struct ccsr_gur __iomem *gur = (void *)(CONFIG_SYS_FSL_GUTS_ADDR);
+	struct ccsr_reset __iomem *rst = (void *)(CONFIG_SYS_FSL_RST_ADDR);
+	u32 mpidr = 0;
+
+	mpidr = ((cluster << 8) | core);
+	/*
+	 * mpidr_el1 register value of core which needs to be released
+	 * is written to scratchrw[6] register
+	 */
+	gur_out32(&gur->scratchrw[6], mpidr);
+	asm volatile("dsb st" : : : "memory");
+	rst->brrl |= 1 << ((cluster * cluster_cores) + core);
+	asm volatile("dsb st" : : : "memory");
+	/*
+	 * scratchrw[6] register value is polled
+	 * when the value becomes zero, this means that this core is up
+	 * and running, next core can be released now
+	 */
+	while (gur_in32(&gur->scratchrw[6]) != 0)
+		;
+}
+#endif
+
 int fsl_layerscape_wake_seconday_cores(void)
 {
 	struct ccsr_gur __iomem *gur = (void *)(CONFIG_SYS_FSL_GUTS_ADDR);
 #ifdef CONFIG_FSL_LSCH3
 	struct ccsr_reset __iomem *rst = (void *)(CONFIG_SYS_FSL_RST_ADDR);
+	u32 svr, ver, cluster, type;
+	int j = 0, cluster_cores = 0;
 #elif defined(CONFIG_FSL_LSCH2)
 	struct ccsr_scfg __iomem *scfg = (void *)(CONFIG_SYS_FSL_SCFG_ADDR);
 #endif
@@ -55,10 +95,40 @@ int fsl_layerscape_wake_seconday_cores(void)
 #ifdef CONFIG_FSL_LSCH3
 	gur_out32(&gur->bootlocptrh, (u32)(gd->relocaddr >> 32));
 	gur_out32(&gur->bootlocptrl, (u32)gd->relocaddr);
-	gur_out32(&gur->scratchrw[6], 1);
-	asm volatile("dsb st" : : : "memory");
-	rst->brrl = cores;
-	asm volatile("dsb st" : : : "memory");
+
+	svr = gur_in32(&gur->svr);
+	ver = SVR_SOC_VER(svr);
+	if (ver == SVR_LS2080A || ver == SVR_LS2085A) {
+		gur_out32(&gur->scratchrw[6], 1);
+		asm volatile("dsb st" : : : "memory");
+		rst->brrl = cores;
+		asm volatile("dsb st" : : : "memory");
+	} else {
+		/*
+		 * Release the cores out of reset one-at-a-time to avoid
+		 * power spikes
+		 */
+		i = 0;
+		cluster = in_le32(&gur->tp_cluster[i].lower);
+		for (j = 0; j < TP_INIT_PER_CLUSTER; j++) {
+			type = initiator_type(cluster, j);
+			if (type &&
+			    TP_ITYP_TYPE(type) == TP_ITYP_TYPE_ARM)
+				cluster_cores++;
+		}
+
+		do {
+			cluster = in_le32(&gur->tp_cluster[i].lower);
+			for (j = 0; j < TP_INIT_PER_CLUSTER; j++) {
+				type = initiator_type(cluster, j);
+				if (type &&
+				    TP_ITYP_TYPE(type) == TP_ITYP_TYPE_ARM)
+					wake_secondary_core_n(i, j,
+							      cluster_cores);
+			}
+		i++;
+		} while ((cluster & TP_CLUSTER_EOC) != TP_CLUSTER_EOC);
+	}
 #elif defined(CONFIG_FSL_LSCH2)
 	scfg_out32(&scfg->scratchrw[0], (u32)(gd->relocaddr >> 32));
 	scfg_out32(&scfg->scratchrw[1], (u32)gd->relocaddr);
diff --git a/arch/arm/cpu/armv8/fsl-layerscape/soc.c b/arch/arm/cpu/armv8/fsl-layerscape/soc.c
index d68eeba349..6c4238707d 100644
--- a/arch/arm/cpu/armv8/fsl-layerscape/soc.c
+++ b/arch/arm/cpu/armv8/fsl-layerscape/soc.c
@@ -31,8 +31,10 @@ bool soc_has_dp_ddr(void)
 	struct ccsr_gur __iomem *gur = (void *)(CONFIG_SYS_FSL_GUTS_ADDR);
 	u32 svr = gur_in32(&gur->svr);
 
-	/* LS2085A has DP_DDR */
-	if (SVR_SOC_VER(svr) == SVR_LS2085A)
+	/* LS2085A, LS2088A, LS2048A has DP_DDR */
+	if ((SVR_SOC_VER(svr) == SVR_LS2085A) ||
+	    (SVR_SOC_VER(svr) == SVR_LS2088A) ||
+	    (SVR_SOC_VER(svr) == SVR_LS2048A))
 		return true;
 
 	return false;
@@ -50,16 +52,16 @@ bool soc_has_aiop(void)
 	return false;
 }
 
-#ifdef CONFIG_LS2080A
+#if defined(CONFIG_FSL_LSCH3)
 /*
  * This erratum requires setting a value to eddrtqcr1 to
  * optimal the DDR performance.
  */
 static void erratum_a008336(void)
 {
+#ifdef CONFIG_SYS_FSL_ERRATUM_A008336
 	u32 *eddrtqcr1;
 
-#ifdef CONFIG_SYS_FSL_ERRATUM_A008336
 #ifdef CONFIG_SYS_FSL_DCSR_DDR_ADDR
 	eddrtqcr1 = (void *)CONFIG_SYS_FSL_DCSR_DDR_ADDR + 0x800;
 	if (fsl_ddr_get_version(0) == 0x50200)
@@ -79,9 +81,9 @@ static void erratum_a008336(void)
  */
 static void erratum_a008514(void)
 {
+#ifdef CONFIG_SYS_FSL_ERRATUM_A008514
 	u32 *eddrtqcr1;
 
-#ifdef CONFIG_SYS_FSL_ERRATUM_A008514
 #ifdef CONFIG_SYS_FSL_DCSR_DDR3_ADDR
 	eddrtqcr1 = (void *)CONFIG_SYS_FSL_DCSR_DDR3_ADDR + 0x800;
 	out_le32(eddrtqcr1, 0x63b20002);
@@ -176,6 +178,7 @@ static void erratum_a009203(void)
 #endif
 #endif
 }
+
 void bypass_smmu(void)
 {
 	u32 val;
diff --git a/arch/arm/cpu/armv8/sec_firmware_asm.S b/arch/arm/cpu/armv8/sec_firmware_asm.S
index 0c6a46249a..1b39f1d322 100644
--- a/arch/arm/cpu/armv8/sec_firmware_asm.S
+++ b/arch/arm/cpu/armv8/sec_firmware_asm.S
@@ -50,4 +50,27 @@ ENTRY(_sec_firmware_support_psci_version)
 	smc	#0
 	ret
 ENDPROC(_sec_firmware_support_psci_version)
+
+/*
+ * Switch from AArch64 EL2 to AArch32 EL2
+ * @param inputs:
+ * x0: argument, zero
+ * x1: machine nr
+ * x2: fdt address
+ * x3: kernel entry point
+ * @param outputs for secure firmware:
+ * x0: function id
+ * x1: kernel entry point
+ * x2: machine nr
+ * x3: fdt address
+*/
+ENTRY(armv8_el2_to_aarch32)
+	mov	x0, x3
+	mov	x3, x2
+	mov	x2, x1
+	mov	x1, x0
+	ldr	x0, =0xc000ff04
+	smc	#0
+	ret
+ENDPROC(armv8_el2_to_aarch32)
 #endif
diff --git a/arch/arm/cpu/armv8/start.S b/arch/arm/cpu/armv8/start.S
index 19c771dba3..4f5f6d8020 100644
--- a/arch/arm/cpu/armv8/start.S
+++ b/arch/arm/cpu/armv8/start.S
@@ -251,9 +251,17 @@ WEAK(lowlevel_init)
 	/*
 	 * All slaves will enter EL2 and optionally EL1.
 	 */
+	adr	x3, lowlevel_in_el2
+	ldr	x4, =ES_TO_AARCH64
 	bl	armv8_switch_to_el2
+
+lowlevel_in_el2:
 #ifdef CONFIG_ARMV8_SWITCH_TO_EL1
+	adr	x3, lowlevel_in_el1
+	ldr	x4, =ES_TO_AARCH64
 	bl	armv8_switch_to_el1
+
+lowlevel_in_el1:
 #endif
 
 #endif /* CONFIG_ARMV8_MULTIENTRY */
diff --git a/arch/arm/cpu/armv8/transition.S b/arch/arm/cpu/armv8/transition.S
index 253a39bd11..adb9f3566b 100644
--- a/arch/arm/cpu/armv8/transition.S
+++ b/arch/arm/cpu/armv8/transition.S
@@ -11,13 +11,36 @@
 #include <asm/macro.h>
 
 ENTRY(armv8_switch_to_el2)
-	switch_el x0, 1f, 0f, 0f
-0:	ret
-1:	armv8_switch_to_el2_m x0
+	switch_el x5, 1f, 0f, 0f
+0:
+	cmp x4, #ES_TO_AARCH64
+	b.eq 2f
+	/*
+	 * When loading 32-bit kernel, it will jump
+	 * to secure firmware again, and never return.
+	 */
+	bl armv8_el2_to_aarch32
+2:
+	/*
+	 * x3 is kernel entry point or switch_to_el1
+	 * if CONFIG_ARMV8_SWITCH_TO_EL1 is defined.
+         * When running in EL2 now, jump to the
+	 * address saved in x3.
+	 */
+	br x3
+1:	armv8_switch_to_el2_m x3, x4, x5
 ENDPROC(armv8_switch_to_el2)
 
 ENTRY(armv8_switch_to_el1)
-	switch_el x0, 0f, 1f, 0f
-0:	ret
-1:	armv8_switch_to_el1_m x0, x1
+	switch_el x5, 0f, 1f, 0f
+0:
+	/* x3 is kernel entry point. When running in EL1
+	 * now, jump to the address saved in x3.
+	 */
+	br x3
+1:	armv8_switch_to_el1_m x3, x4, x5
 ENDPROC(armv8_switch_to_el1)
+
+WEAK(armv8_el2_to_aarch32)
+	ret
+ENDPROC(armv8_el2_to_aarch32)
diff --git a/arch/arm/cpu/armv8/zynqmp/Kconfig b/arch/arm/cpu/armv8/zynqmp/Kconfig
index 1eedb39aa5..a3baae4f74 100644
--- a/arch/arm/cpu/armv8/zynqmp/Kconfig
+++ b/arch/arm/cpu/armv8/zynqmp/Kconfig
@@ -41,6 +41,13 @@ config SYS_CONFIG_NAME
 	  Based on this option include/configs/<CONFIG_SYS_CONFIG_NAME>.h header
 	  will be used for board configuration.
 
+config BOOT_INIT_FILE
+	string "boot.bin init register filename"
+	default ""
+	help
+	  Add register writes to boot.bin format (max 256 pairs).
+	  Expect a table of register-value pairs, e.g. "0x12345678 0x4321"
+
 config ZYNQMP_USB
 	bool "Configure ZynqMP USB"
 
diff --git a/arch/arm/cpu/armv8/zynqmp/spl.c b/arch/arm/cpu/armv8/zynqmp/spl.c
index 04e190537d..bdbd61380a 100644
--- a/arch/arm/cpu/armv8/zynqmp/spl.c
+++ b/arch/arm/cpu/armv8/zynqmp/spl.c
@@ -69,12 +69,14 @@ u32 spl_boot_device(void)
 
 #if defined(CONFIG_SPL_ZYNQMP_ALT_BOOTMODE_ENABLED)
 	/* Change default boot mode at run-time */
-	writel(BOOT_MODE_USE_ALT |
-	       CONFIG_SPL_ZYNQMP_ALT_BOOTMODE << BOOT_MODE_ALT_SHIFT,
+	writel(CONFIG_SPL_ZYNQMP_ALT_BOOTMODE << BOOT_MODE_ALT_SHIFT,
 	       &crlapb_base->boot_mode);
 #endif
 
 	reg = readl(&crlapb_base->boot_mode);
+	if (reg >> BOOT_MODE_ALT_SHIFT)
+		reg >>= BOOT_MODE_ALT_SHIFT;
+
 	bootmode = reg & BOOT_MODES_MASK;
 
 	switch (bootmode) {
diff --git a/arch/arm/dts/Makefile b/arch/arm/dts/Makefile
index 836a8c4d1e..ae47d8127c 100644
--- a/arch/arm/dts/Makefile
+++ b/arch/arm/dts/Makefile
@@ -28,14 +28,16 @@ dtb-$(CONFIG_EXYNOS5) += exynos5250-arndale.dtb \
 	exynos5422-odroidxu3.dtb
 dtb-$(CONFIG_EXYNOS7420) += exynos7420-espresso7420.dtb
 dtb-$(CONFIG_ARCH_ROCKCHIP) += \
+	rk3036-sdk.dtb \
 	rk3288-firefly.dtb \
-	rk3288-jerry.dtb \
+	rk3288-veyron-jerry.dtb \
+	rk3288-veyron-mickey.dtb \
+	rk3288-veyron-minnie.dtb \
 	rk3288-rock2-square.dtb \
 	rk3288-evb.dtb \
 	rk3288-fennec.dtb \
 	rk3288-miniarm.dtb \
 	rk3288-popmetal.dtb \
-	rk3036-sdk.dtb \
 	rk3399-evb.dtb
 dtb-$(CONFIG_ARCH_MESON) += \
 	meson-gxbb-odroidc2.dtb
@@ -97,6 +99,8 @@ dtb-$(CONFIG_ARCH_ZYNQ) += zynq-zc702.dtb \
 	zynq-zybo.dtb \
 	zynq-microzed.dtb \
 	zynq-picozed.dtb \
+	zynq-topic-miami.dtb \
+	zynq-topic-miamiplus.dtb \
 	zynq-zc770-xm010.dtb \
 	zynq-zc770-xm011.dtb \
 	zynq-zc770-xm012.dtb \
@@ -141,13 +145,15 @@ dtb-$(CONFIG_TARGET_STV0991) += stv0991.dtb
 
 dtb-$(CONFIG_LS102XA) += ls1021a-qds-duart.dtb \
 	ls1021a-qds-lpuart.dtb \
-	ls1021a-twr-duart.dtb ls1021a-twr-lpuart.dtb
+	ls1021a-twr-duart.dtb ls1021a-twr-lpuart.dtb \
+	ls1021a-iot-duart.dtb
 dtb-$(CONFIG_FSL_LSCH3) += fsl-ls2080a-qds.dtb \
 	fsl-ls2080a-rdb.dtb
 dtb-$(CONFIG_FSL_LSCH2) += fsl-ls1043a-qds-duart.dtb \
 	fsl-ls1043a-qds-lpuart.dtb \
 	fsl-ls1043a-rdb.dtb \
 	fsl-ls1046a-qds-duart.dtb \
+	fsl-ls1046a-qds-lpuart.dtb \
 	fsl-ls1046a-rdb.dtb \
 	fsl-ls1012a-qds.dtb \
 	fsl-ls1012a-rdb.dtb \
@@ -254,6 +260,7 @@ dtb-$(CONFIG_MACH_SUN8I_A33) += \
 	sun8i-a33-olinuxino.dtb \
 	sun8i-a33-q8-tablet.dtb \
 	sun8i-a33-sinlinx-sina33.dtb \
+	sun8i-r16-nintendo-nes-classic-edition.dtb \
 	sun8i-r16-parrot.dtb
 dtb-$(CONFIG_MACH_SUN8I_A83T) += \
 	sun8i-a83t-allwinner-h8homlet-v2.dtb \
diff --git a/arch/arm/dts/fsl-ls1046a-qds-lpuart.dts b/arch/arm/dts/fsl-ls1046a-qds-lpuart.dts
new file mode 100644
index 0000000000..21243d0766
--- /dev/null
+++ b/arch/arm/dts/fsl-ls1046a-qds-lpuart.dts
@@ -0,0 +1,16 @@
+/*
+ * Device Tree file for Freescale Layerscape-1046A family SoC.
+ *
+ * Copyright (C) 2016, Freescale Semiconductor
+ *
+ * SPDX-License-Identifier:	GPL-2.0+
+ */
+
+/dts-v1/;
+#include "fsl-ls1046a-qds.dtsi"
+
+/ {
+       chosen {
+               stdout-path = &lpuart0;
+       };
+};
diff --git a/arch/arm/dts/fsl-ls1046a-qds.dtsi b/arch/arm/dts/fsl-ls1046a-qds.dtsi
index c5122930fe..a49ca08d88 100644
--- a/arch/arm/dts/fsl-ls1046a-qds.dtsi
+++ b/arch/arm/dts/fsl-ls1046a-qds.dtsi
@@ -75,3 +75,7 @@
 &duart1 {
 	status = "okay";
 };
+
+&lpuart0 {
+	status = "okay";
+};
diff --git a/arch/arm/dts/fsl-ls1046a.dtsi b/arch/arm/dts/fsl-ls1046a.dtsi
index 87dd9976d1..359a9d13bf 100644
--- a/arch/arm/dts/fsl-ls1046a.dtsi
+++ b/arch/arm/dts/fsl-ls1046a.dtsi
@@ -151,6 +151,60 @@
 			clocks = <&clockgen 4 0>;
 		};
 
+		lpuart0: serial@2950000 {
+			compatible = "fsl,ls1021a-lpuart";
+			reg = <0x0 0x2950000 0x0 0x1000>;
+			interrupts = <0 48 0x4>;
+			clocks = <&clockgen 4 0>;
+			clock-names = "ipg";
+			status = "disabled";
+		};
+
+		lpuart1: serial@2960000 {
+			compatible = "fsl,ls1021a-lpuart";
+			reg = <0x0 0x2960000 0x0 0x1000>;
+			interrupts = <0 49 0x4>;
+			clocks = <&clockgen 4 1>;
+			clock-names = "ipg";
+			status = "disabled";
+		};
+
+		lpuart2: serial@2970000 {
+			compatible = "fsl,ls1021a-lpuart";
+			reg = <0x0 0x2970000 0x0 0x1000>;
+			interrupts = <0 50 0x4>;
+			clocks = <&clockgen 4 1>;
+			clock-names = "ipg";
+			status = "disabled";
+		};
+
+		lpuart3: serial@2980000 {
+			compatible = "fsl,ls1021a-lpuart";
+			reg = <0x0 0x2980000 0x0 0x1000>;
+			interrupts = <0 51 0x4>;
+			clocks = <&clockgen 4 1>;
+			clock-names = "ipg";
+			status = "disabled";
+		};
+
+		lpuart4: serial@2990000 {
+			compatible = "fsl,ls1021a-lpuart";
+			reg = <0x0 0x2990000 0x0 0x1000>;
+			interrupts = <0 52 0x4>;
+			clocks = <&clockgen 4 1>;
+			clock-names = "ipg";
+			status = "disabled";
+		};
+
+		lpuart5: serial@29a0000 {
+			compatible = "fsl,ls1021a-lpuart";
+			reg = <0x0 0x29a0000 0x0 0x1000>;
+			interrupts = <0 53 0x4>;
+			clocks = <&clockgen 4 1>;
+			clock-names = "ipg";
+			status = "disabled";
+		};
+
 		qspi: quadspi@1550000 {
 			compatible = "fsl,vf610-qspi";
 			#address-cells = <1>;
diff --git a/arch/arm/dts/ls1021a-iot-duart.dts b/arch/arm/dts/ls1021a-iot-duart.dts
new file mode 100644
index 0000000000..62e4c67040
--- /dev/null
+++ b/arch/arm/dts/ls1021a-iot-duart.dts
@@ -0,0 +1,16 @@
+/*
+ * Freescale ls1021a IOT board device tree source
+ *
+ * Copyright 2016 Freescale Semiconductor, Inc.
+ *
+ * SPDX-License-Identifier:	GPL-2.0+
+ */
+
+/dts-v1/;
+#include "ls1021a-iot.dtsi"
+
+/ {
+	chosen {
+	stdout-path = &uart0;
+	};
+};
diff --git a/arch/arm/dts/ls1021a-iot.dtsi b/arch/arm/dts/ls1021a-iot.dtsi
new file mode 100644
index 0000000000..1817c62c04
--- /dev/null
+++ b/arch/arm/dts/ls1021a-iot.dtsi
@@ -0,0 +1,103 @@
+/*
+ * Freescale ls1021a IOT board device tree source
+ *
+ * Copyright 2016 Freescale Semiconductor, Inc.
+ *
+ * SPDX-License-Identifier:	GPL-2.0+
+ */
+
+
+#include "ls1021a.dtsi"
+
+/ {
+	model = "LS1021A IOT Board";
+
+	aliases {
+		enet2_rgmii_phy = &rgmii_phy1;
+		enet0_sgmii_phy = &sgmii_phy2;
+		enet1_sgmii_phy = &sgmii_phy0;
+		spi0 = &qspi;
+		spi1 = &dspi1;
+	};
+};
+
+&qspi {
+	bus-num = <0>;
+	status = "okay";
+
+	qflash0: n25q128a13@0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "spi-flash";
+		spi-max-frequency = <20000000>;
+		reg = <0>;
+	};
+};
+
+&dspi1 {
+	bus-num = <0>;
+	status = "okay";
+
+	dspiflash: at26df081a@0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "spi-flash";
+		spi-max-frequency = <16000000>;
+		spi-cpol;
+		spi-cpha;
+		reg = <0>;
+	};
+};
+
+&i2c0 {
+	status = "okay";
+};
+
+&i2c1 {
+	status = "okay";
+};
+
+&ifc {
+	#address-cells = <2>;
+	#size-cells = <1>;
+	/* NOR Flash on board */
+	ranges = <0x0 0x0 0x60000000 0x08000000>;
+	status = "okay";
+
+	nor@0,0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "cfi-flash";
+		reg = <0x0 0x0 0x8000000>;
+		bank-width = <2>;
+		device-width = <1>;
+	};
+};
+
+&lpuart0 {
+	status = "okay";
+};
+
+&mdio0 {
+	sgmii_phy0: ethernet-phy@0 {
+		reg = <0x0>;
+	};
+	rgmii_phy1: ethernet-phy@1 {
+		reg = <0x1>;
+	};
+	sgmii_phy2: ethernet-phy@2 {
+		reg = <0x2>;
+	};
+	tbi1: tbi-phy@1f {
+		reg = <0x1f>;
+		device_type = "tbi-phy";
+	};
+};
+
+&uart0 {
+	status = "okay";
+};
+
+&uart1 {
+	status = "okay";
+};
diff --git a/arch/arm/dts/rk3036-sdk.dts b/arch/arm/dts/rk3036-sdk.dts
index 1c9ddf9856..bdc7b980b0 100644
--- a/arch/arm/dts/rk3036-sdk.dts
+++ b/arch/arm/dts/rk3036-sdk.dts
@@ -16,10 +16,25 @@
 		stdout-path = &uart2;
 	};
 
-	usb_control {
-		compatible = "rockchip,rk3036-usb-control";
-		host_drv_gpio = <&gpio2 23 GPIO_ACTIVE_LOW>;
-		otg_drv_gpio = <&gpio0 26 GPIO_ACTIVE_LOW>;
+	vcc5v0_otg: vcc5v0-otg-drv {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc5v0_otg";
+		gpio = <&gpio0 26 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&otg_vbus_drv>;
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+	};
+
+	vcc5v0_host: vcc5v0-host-drv {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc5v0_host";
+		gpio = <&gpio2 23 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&host_vbus_drv>;
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-always-on;
 	};
 };
 
@@ -42,3 +57,17 @@
 &usb_otg {
 	status = "okay";
 };
+
+&pinctrl {
+	usb_otg {
+		otg_vbus_drv: host-vbus-drv {
+			rockchip,pins = <0 26 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	usb_host {
+		host_vbus_drv: host-vbus-drv {
+			rockchip,pins = <2 23 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+};
diff --git a/arch/arm/dts/rk3288-veyron-chromebook.dtsi b/arch/arm/dts/rk3288-veyron-chromebook.dtsi
index bbbc2f408d..f88a8680bf 100644
--- a/arch/arm/dts/rk3288-veyron-chromebook.dtsi
+++ b/arch/arm/dts/rk3288-veyron-chromebook.dtsi
@@ -13,6 +13,8 @@
 / {
 	aliases {
 		i2c20 = &i2c_tunnel;
+		video0 = &vopl;
+		video1 = &vopb;
 	};
 
 	gpio_keys: gpio-keys {
diff --git a/arch/arm/dts/rk3288-jerry.dts b/arch/arm/dts/rk3288-veyron-jerry.dts
index 2aa3b9f971..8aab607cc5 100644
--- a/arch/arm/dts/rk3288-jerry.dts
+++ b/arch/arm/dts/rk3288-veyron-jerry.dts
@@ -55,6 +55,17 @@
 	};
 };
 
+&dmc {
+	rockchip,pctl-timing = <0x29a 0xc8 0x1f4 0x42 0x4e 0x4 0xea 0xa
+		0x5 0x0 0xa 0x7 0x19 0x24 0xa 0x7
+		0x5 0xa 0x5 0x200 0x5 0x10 0x40 0x0
+		0x1 0x7 0x7 0x4 0xc 0x43 0x100 0x0
+		0x5 0x0>;
+	rockchip,phy-timing = <0x48f9aab4 0xea0910 0x1002c200
+		0xa60 0x40 0x10 0x0>;
+	rockchip,sdram-params = <0x30B25564 0x627 3 666000000 3 9 1>;
+};
+
 &gpio_keys {
 	power {
 		gpios = <&gpio0 5 GPIO_ACTIVE_LOW>;
@@ -108,11 +119,6 @@
 	pinctrl-0 = <&vcc50_hdmi_en>;
 };
 
-&vopb {
-	/* Disable this so that we use vopl */
-	status = "disabled";
-};
-
 &edp {
 	pinctrl-names = "default";
 	pinctrl-0 = <&edp_hpd>;
diff --git a/arch/arm/dts/rk3288-veyron-mickey.dts b/arch/arm/dts/rk3288-veyron-mickey.dts
new file mode 100644
index 0000000000..e0dc362061
--- /dev/null
+++ b/arch/arm/dts/rk3288-veyron-mickey.dts
@@ -0,0 +1,277 @@
+/*
+ * Google Veyron Mickey Rev 0 board device tree source
+ *
+ * Copyright 2015 Google, Inc
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ *  Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "rk3288-veyron-chromebook.dtsi"
+
+/ {
+	model = "Google Mickey";
+	compatible = "google,veyron-mickey-rev8", "google,veyron-mickey-rev7",
+		     "google,veyron-mickey-rev6", "google,veyron-mickey-rev5",
+		     "google,veyron-mickey-rev4", "google,veyron-mickey-rev3",
+		     "google,veyron-mickey-rev2", "google,veyron-mickey-rev1",
+		     "google,veyron-mickey-rev0", "google,veyron-mickey",
+		     "google,veyron", "rockchip,rk3288";
+
+	vcc_5v: vcc-5v {
+		vin-supply = <&vcc33_sys>;
+	};
+
+	vcc33_io: vcc33_io {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc33_io";
+		regulator-always-on;
+		regulator-boot-on;
+		vin-supply = <&vcc33_sys>;
+	};
+};
+
+&cpu_thermal {
+	/delete-node/ trips;
+	/delete-node/ cooling-maps;
+
+	trips {
+		cpu_alert_almost_warm: cpu_alert_almost_warm {
+			temperature = <63000>; /* millicelsius */
+			hysteresis = <2000>; /* millicelsius */
+			type = "passive";
+		};
+		cpu_alert_warm: cpu_alert_warm {
+			temperature = <65000>; /* millicelsius */
+			hysteresis = <2000>; /* millicelsius */
+			type = "passive";
+		};
+		cpu_alert_almost_hot: cpu_alert_almost_hot {
+			temperature = <80000>; /* millicelsius */
+			hysteresis = <2000>; /* millicelsius */
+			type = "passive";
+		};
+		cpu_alert_hot: cpu_alert_hot {
+			temperature = <82000>; /* millicelsius */
+			hysteresis = <2000>; /* millicelsius */
+			type = "passive";
+		};
+		cpu_alert_hotter: cpu_alert_hotter {
+			temperature = <84000>; /* millicelsius */
+			hysteresis = <2000>; /* millicelsius */
+			type = "passive";
+		};
+		cpu_alert_very_hot: cpu_alert_very_hot {
+			temperature = <85000>; /* millicelsius */
+			hysteresis = <2000>; /* millicelsius */
+			type = "passive";
+		};
+		cpu_crit: cpu_crit {
+			temperature = <90000>; /* millicelsius */
+			hysteresis = <2000>; /* millicelsius */
+			type = "critical";
+		};
+	};
+
+	cooling-maps {
+		/*
+		 * After 1st level, throttle the CPU down to as low as 1.4 GHz
+		 * and don't let the GPU go faster than 400 MHz.  Note that we
+		 * won't throttle the GPU lower than 400 MHz due to CPU
+		 * heat--we'll let the GPU do the rest itself.
+		 */
+		cpu_warm_limit_cpu {
+			trip = <&cpu_alert_warm>;
+			cooling-device =
+				<&cpu0 THERMAL_NO_LIMIT 4>;
+		};
+
+		/*
+		 * Add some discrete steps to help throttling system deal
+		 * with the fact that there are two passive cooling devices:
+		 * the CPU and the GPU.
+		 *
+		 * - 1.2 GHz - 1.0 GHz (almost hot)
+		 * - 800 MHz           (hot)
+		 * - 800 MHz - 696 MHz (hotter)
+		 * - 696 MHz - min     (very hot)
+		 *
+		 * Note:
+		 * - 800 MHz appears to be a "sweet spot" for me.  I can run
+		 *   some pretty serious workload here and be happy.
+		 * - After 696 MHz we stop lowering voltage, so throttling
+		 *   past there is less effective.
+		 */
+		cpu_almost_hot_limit_cpu {
+			trip = <&cpu_alert_almost_hot>;
+			cooling-device =
+				<&cpu0 5 6>;
+		};
+		cpu_hot_limit_cpu {
+			trip = <&cpu_alert_hot>;
+			cooling-device =
+				<&cpu0 7 7>;
+		};
+		cpu_hotter_limit_cpu {
+			trip = <&cpu_alert_hotter>;
+			cooling-device =
+				<&cpu0 7 8>;
+		};
+		cpu_very_hot_limit_cpu {
+			trip = <&cpu_alert_very_hot>;
+			cooling-device =
+				<&cpu0 8 THERMAL_NO_LIMIT>;
+		};
+	};
+};
+
+&dmc {
+	rockchip,pctl-timing = <0x215 0xc8 0x0 0x35 0x26 0x2 0x70 0x2000d
+		0x6 0x0 0x8 0x4 0x17 0x24 0xd 0x6
+		0x4 0x8 0x4 0x76 0x4 0x0 0x30 0x0
+		0x1 0x2 0x2 0x4 0x0 0x0 0xc0 0x4
+		0x8 0x1f4>;
+	rockchip,phy-timing = <0x48d7dd93 0x187008d8 0x121076
+		0x0 0xc3 0x6 0x2>;
+	rockchip,sdram-params = <0x20d266a4 0x5b6 2 533000000 6 9 1>;
+};
+
+&emmc {
+	/delete-property/mmc-hs200-1_8v;
+};
+
+&i2c2 {
+	status = "disabled";
+};
+
+&i2c4 {
+	status = "disabled";
+};
+
+&i2s {
+	status = "okay";
+	clock-names = "i2s_hclk", "i2s_clk", "i2s_clk_out";
+	clocks = <&cru HCLK_I2S0>, <&cru SCLK_I2S0>, <&cru SCLK_I2S0_OUT>;
+};
+
+&rk808 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pmic_int_l &dvs_1 &dvs_2>;
+	dvs-gpios = <&gpio7 12 GPIO_ACTIVE_HIGH>,
+		    <&gpio7 15 GPIO_ACTIVE_HIGH>;
+
+	/delete-property/ vcc6-supply;
+	/delete-property/ vcc12-supply;
+
+	vcc11-supply = <&vcc33_sys>;
+
+	regulators {
+		/* vcc33_io is sourced directly from vcc33_sys */
+		/delete-node/ LDO_REG1;
+		/delete-node/ LDO_REG7;
+
+		/* This is not a pwren anymore, but the real power supply */
+		vdd10_lcd: LDO_REG7 {
+			regulator-always-on;
+			regulator-boot-on;
+			regulator-min-microvolt = <1000000>;
+			regulator-max-microvolt = <1000000>;
+			regulator-name = "vdd10_lcd";
+			regulator-suspend-mem-disabled;
+		};
+
+		vcc18_lcd: LDO_REG8 {
+			regulator-always-on;
+			regulator-boot-on;
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-name = "vcc18_lcd";
+			regulator-suspend-mem-disabled;
+		};
+	};
+};
+
+&pinctrl {
+	hdmi {
+		power_hdmi_on: power-hdmi-on {
+			rockchip,pins = <7 11 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	pmic {
+		dvs_1: dvs-1 {
+			rockchip,pins = <7 12 RK_FUNC_GPIO &pcfg_pull_down>;
+		};
+
+		dvs_2: dvs-2 {
+			rockchip,pins = <7 15 RK_FUNC_GPIO &pcfg_pull_down>;
+		};
+	};
+};
+
+&sdmmc {
+	status = "disabled";
+};
+
+&sdio0 {
+	status = "disabled";
+};
+
+&sdmmc {
+	status = "disabled";
+};
+
+&spi0 {
+	status = "disabled";
+};
+
+&usb_host0_ehci {
+	status = "disabled";
+};
+
+&usb_host1 {
+	status = "disabled";
+};
+
+&vcc50_hdmi {
+	enable-active-high;
+	gpio = <&gpio7 11 GPIO_ACTIVE_HIGH>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&power_hdmi_on>;
+};
diff --git a/arch/arm/dts/rk3288-veyron-minnie.dts b/arch/arm/dts/rk3288-veyron-minnie.dts
new file mode 100644
index 0000000000..0a2915fba0
--- /dev/null
+++ b/arch/arm/dts/rk3288-veyron-minnie.dts
@@ -0,0 +1,301 @@
+/*
+ * Google Veyron Minnie Rev 0+ board device tree source
+ *
+ * Copyright 2015 Google, Inc
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ *  Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "rk3288-veyron-chromebook.dtsi"
+
+/ {
+	model = "Google Minnie";
+	compatible = "google,veyron-minnie-rev4", "google,veyron-minnie-rev3",
+		     "google,veyron-minnie-rev2", "google,veyron-minnie-rev1",
+		     "google,veyron-minnie-rev0", "google,veyron-minnie",
+		     "google,veyron", "rockchip,rk3288";
+
+	backlight_regulator: backlight-regulator {
+		compatible = "regulator-fixed";
+		enable-active-high;
+		gpio = <&gpio2 12 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&bl_pwr_en>;
+		regulator-name = "backlight_regulator";
+		vin-supply = <&vcc33_sys>;
+		startup-delay-us = <15000>;
+	};
+
+	panel_regulator: panel-regulator {
+		compatible = "regulator-fixed";
+		enable-active-high;
+		gpio = <&gpio7 14 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&lcd_enable_h>;
+		regulator-name = "panel_regulator";
+		startup-delay-us = <100000>;
+		vin-supply = <&vcc33_sys>;
+	};
+
+	vcc18_lcd: vcc18-lcd {
+		compatible = "regulator-fixed";
+		enable-active-high;
+		gpio = <&gpio2 13 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&avdd_1v8_disp_en>;
+		regulator-name = "vcc18_lcd";
+		regulator-always-on;
+		regulator-boot-on;
+		vin-supply = <&vcc18_wl>;
+	};
+};
+
+&backlight {
+	/* Minnie panel PWM must be >= 1%, so start non-zero brightness at 3 */
+	brightness-levels = <
+			  0   3   4   5   6   7
+			  8   9  10  11  12  13  14  15
+			 16  17  18  19  20  21  22  23
+			 24  25  26  27  28  29  30  31
+			 32  33  34  35  36  37  38  39
+			 40  41  42  43  44  45  46  47
+			 48  49  50  51  52  53  54  55
+			 56  57  58  59  60  61  62  63
+			 64  65  66  67  68  69  70  71
+			 72  73  74  75  76  77  78  79
+			 80  81  82  83  84  85  86  87
+			 88  89  90  91  92  93  94  95
+			 96  97  98  99 100 101 102 103
+			104 105 106 107 108 109 110 111
+			112 113 114 115 116 117 118 119
+			120 121 122 123 124 125 126 127
+			128 129 130 131 132 133 134 135
+			136 137 138 139 140 141 142 143
+			144 145 146 147 148 149 150 151
+			152 153 154 155 156 157 158 159
+			160 161 162 163 164 165 166 167
+			168 169 170 171 172 173 174 175
+			176 177 178 179 180 181 182 183
+			184 185 186 187 188 189 190 191
+			192 193 194 195 196 197 198 199
+			200 201 202 203 204 205 206 207
+			208 209 210 211 212 213 214 215
+			216 217 218 219 220 221 222 223
+			224 225 226 227 228 229 230 231
+			232 233 234 235 236 237 238 239
+			240 241 242 243 244 245 246 247
+			248 249 250 251 252 253 254 255>;
+	power-supply = <&backlight_regulator>;
+};
+
+&dmc {
+	rockchip,pctl-timing = <0x215 0xc8 0x0 0x35 0x26 0x2 0x70 0x2000d
+		0x6 0x0 0x8 0x4 0x17 0x24 0xd 0x6
+		0x4 0x8 0x4 0x76 0x4 0x0 0x30 0x0
+		0x1 0x2 0x2 0x4 0x0 0x0 0xc0 0x4
+		0x8 0x1f4>;
+	rockchip,phy-timing = <0x48d7dd93 0x187008d8 0x121076
+		0x0 0xc3 0x6 0x1>;
+	rockchip,sdram-params = <0x20d266a4 0x5b6 6 533000000 6 13 0>;
+};
+
+&emmc {
+	/delete-property/mmc-hs200-1_8v;
+};
+
+&gpio_keys {
+	pinctrl-0 = <&pwr_key_h &ap_lid_int_l &volum_down_l &volum_up_l>;
+
+	volum_down {
+		label = "Volum_down";
+		gpios = <&gpio5 11 GPIO_ACTIVE_LOW>;
+		linux,code = <KEY_VOLUMEDOWN>;
+		debounce-interval = <100>;
+	};
+
+	volum_up {
+		label = "Volum_up";
+		gpios = <&gpio5 10 GPIO_ACTIVE_LOW>;
+		linux,code = <KEY_VOLUMEUP>;
+		debounce-interval = <100>;
+	};
+};
+
+&i2c_tunnel {
+	battery: bq27500@55 {
+		compatible = "ti,bq27500";
+		reg = <0x55>;
+	};
+};
+
+&i2c3 {
+	status = "okay";
+
+	clock-frequency = <400000>;
+	i2c-scl-falling-time-ns = <50>;
+	i2c-scl-rising-time-ns = <300>;
+
+	touchscreen@10 {
+		compatible = "elan,ekth3500";
+		reg = <0x10>;
+		interrupt-parent = <&gpio2>;
+		interrupts = <14 IRQ_TYPE_EDGE_FALLING>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&touch_int &touch_rst>;
+		reset-gpios = <&gpio2 15 GPIO_ACTIVE_LOW>;
+		vcc33-supply = <&vcc33_touch>;
+		vccio-supply = <&vcc33_touch>;
+	};
+};
+
+&panel {
+	compatible = "auo,b101ean01", "simple-panel";
+	power-supply= <&panel_regulator>;
+};
+
+&rk808 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pmic_int_l &dvs_1 &dvs_2>;
+
+	regulators {
+		vcc33_touch: LDO_REG2 {
+			regulator-min-microvolt = <3300000>;
+			regulator-max-microvolt = <3300000>;
+			regulator-name = "vcc33_touch";
+			regulator-state-mem {
+				regulator-off-in-suspend;
+			};
+		};
+
+		vcc5v_touch: SWITCH_REG2 {
+			regulator-name = "vcc5v_touch";
+			regulator-state-mem {
+				regulator-off-in-suspend;
+			};
+		};
+	};
+};
+
+&sdmmc {
+	disable-wp;
+	pinctrl-names = "default";
+	pinctrl-0 = <&sdmmc_clk &sdmmc_cmd &sdmmc_cd_disabled &sdmmc_cd_gpio
+			&sdmmc_bus4>;
+};
+
+&vcc_5v {
+	enable-active-high;
+	gpio = <&gpio7 21 GPIO_ACTIVE_HIGH>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&drv_5v>;
+};
+
+&vcc50_hdmi {
+	enable-active-high;
+	gpio = <&gpio5 19 GPIO_ACTIVE_HIGH>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&vcc50_hdmi_en>;
+};
+
+&pinctrl {
+	backlight {
+		bl_pwr_en: bl_pwr_en {
+			rockchip,pins = <2 12 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	buck-5v {
+		drv_5v: drv-5v {
+			rockchip,pins = <7 21 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	buttons {
+		volum_down_l: volum-down-l {
+			rockchip,pins = <5 11 RK_FUNC_GPIO &pcfg_pull_up>;
+		};
+
+		volum_up_l: volum-up-l {
+			rockchip,pins = <5 10 RK_FUNC_GPIO &pcfg_pull_up>;
+		};
+	};
+
+	hdmi {
+		vcc50_hdmi_en: vcc50-hdmi-en {
+			rockchip,pins = <5 19 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	lcd {
+		lcd_enable_h: lcd-en {
+			rockchip,pins = <7 14 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+
+		avdd_1v8_disp_en: avdd-1v8-disp-en {
+			rockchip,pins = <2 13 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	pmic {
+		dvs_1: dvs-1 {
+			rockchip,pins = <7 12 RK_FUNC_GPIO &pcfg_pull_down>;
+		};
+
+		dvs_2: dvs-2 {
+			rockchip,pins = <7 15 RK_FUNC_GPIO &pcfg_pull_down>;
+		};
+	};
+
+	prochot {
+		gpio_prochot: gpio-prochot {
+			rockchip,pins = <2 8 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	touchscreen {
+		touch_int: touch-int {
+			rockchip,pins = <2 14 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+
+		touch_rst: touch-rst {
+			rockchip,pins = <2 15 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+};
diff --git a/arch/arm/dts/rk3288-veyron.dtsi b/arch/arm/dts/rk3288-veyron.dtsi
index 2ffe39cbf7..a314058750 100644
--- a/arch/arm/dts/rk3288-veyron.dtsi
+++ b/arch/arm/dts/rk3288-veyron.dtsi
@@ -245,14 +245,6 @@
 		533000 1150000
 		666000 1200000
 	>;
-	rockchip,pctl-timing = <0x29a 0xc8 0x1f4 0x42 0x4e 0x4 0xea 0xa
-		0x5 0x0 0xa 0x7 0x19 0x24 0xa 0x7
-		0x5 0xa 0x5 0x200 0x5 0x10 0x40 0x0
-		0x1 0x7 0x7 0x4 0xc 0x43 0x100 0x0
-		0x5 0x0>;
-	rockchip,phy-timing = <0x48f9aab4 0xea0910 0x1002c200
-		0xa60 0x40 0x10 0x0>;
-	rockchip,sdram-params = <0x30B25564 0x627 3 666000000 3 9 1>;
 };
 
 &efuse {
diff --git a/arch/arm/dts/sun8i-r16-nintendo-nes-classic-edition.dts b/arch/arm/dts/sun8i-r16-nintendo-nes-classic-edition.dts
new file mode 100644
index 0000000000..dce688ec8e
--- /dev/null
+++ b/arch/arm/dts/sun8i-r16-nintendo-nes-classic-edition.dts
@@ -0,0 +1,63 @@
+/*
+ * Copyright (c) 2016 FUKAUMI Naoki <naobsd@gmail.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "sun8i-a33.dtsi"
+
+/ {
+	model = "Nintendo NES Classic Edition";
+	compatible = "nintendo,nes-classic-edition", "allwinner,sun8i-a33";
+
+	aliases {
+		serial0 = &uart0;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_pins_a>;
+	status = "okay";
+};
diff --git a/arch/arm/dts/zynq-7000.dtsi b/arch/arm/dts/zynq-7000.dtsi
index b618a3f484..6df0329cfc 100644
--- a/arch/arm/dts/zynq-7000.dtsi
+++ b/arch/arm/dts/zynq-7000.dtsi
@@ -6,9 +6,10 @@
  *
  * SPDX-License-Identifier:	GPL-2.0+
  */
-/include/ "skeleton.dtsi"
 
 / {
+	#address-cells = <1>;
+	#size-cells = <1>;
 	compatible = "xlnx,zynq-7000";
 
 	cpus {
@@ -37,14 +38,14 @@
 		};
 	};
 
-	pmu {
+	pmu@f8891000 {
 		compatible = "arm,cortex-a9-pmu";
 		interrupts = <0 5 4>, <0 6 4>;
 		interrupt-parent = <&intc>;
 		reg = < 0xf8891000 0x1000 0xf8893000 0x1000 >;
 	};
 
-	regulator_vccpint: fixedregulator@0 {
+	regulator_vccpint: fixedregulator {
 		compatible = "regulator-fixed";
 		regulator-name = "VCCPINT";
 		regulator-min-microvolt = <1000000>;
diff --git a/arch/arm/dts/zynq-microzed.dts b/arch/arm/dts/zynq-microzed.dts
index cb238cd5e7..2d07b92e9c 100644
--- a/arch/arm/dts/zynq-microzed.dts
+++ b/arch/arm/dts/zynq-microzed.dts
@@ -18,7 +18,7 @@
 		mmc0 = &sdhci0;
 	};
 
-	memory {
+	memory@0 {
 		device_type = "memory";
 		reg = <0 0x40000000>;
 	};
diff --git a/arch/arm/dts/zynq-picozed.dts b/arch/arm/dts/zynq-picozed.dts
index 3408df8b8b..fea04ab45a 100644
--- a/arch/arm/dts/zynq-picozed.dts
+++ b/arch/arm/dts/zynq-picozed.dts
@@ -16,7 +16,7 @@
 		serial0 = &uart1;
 	};
 
-	memory {
+	memory@0 {
 		device_type = "memory";
 		reg = <0 0x40000000>;
 	};
diff --git a/arch/arm/dts/zynq-topic-miami.dts b/arch/arm/dts/zynq-topic-miami.dts
new file mode 100644
index 0000000000..aa05c4d368
--- /dev/null
+++ b/arch/arm/dts/zynq-topic-miami.dts
@@ -0,0 +1,97 @@
+/*
+ * Topic Miami board DTS
+ *
+ * Copyright (C) 2014-2016 Topic Embedded Products
+ *
+ * SPDX-License-Identifier:	GPL-2.0+
+ */
+/dts-v1/;
+#include "zynq-7000.dtsi"
+
+/ {
+	model = "Topic Miami Zynq Board";
+	compatible = "topic,miami", "xlnx,zynq-7000";
+
+	aliases {
+		ethernet0 = &gem0;
+		serial0 = &uart0;
+		spi0 = &qspi;
+		i2c0 = &i2c0;
+		i2c1 = &i2c1;
+		mmc0 = &sdhci0;
+	};
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0x0 0x40000000>;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+};
+
+&qspi {
+	u-boot,dm-pre-reloc;
+	status = "okay";
+	is-dual = <0>;
+	num-cs = <1>;
+	flash@0 {
+		compatible = "st,m25p80", "n25q256a";
+		m25p,fast-read;
+		reg = <0x0>;
+		spi-tx-bus-width = <1>;
+		spi-rx-bus-width = <4>;
+		spi-max-frequency = <100000000>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		partition@qspi-u-boot-spl {
+			label = "qspi-u-boot-spl";
+			reg = <0x00000 0x10000>;
+		};
+		partition@qspi-u-boot-img {
+			label = "qspi-u-boot-img";
+			reg = <0x10000 0x60000>;
+		};
+		partition@qspi-device-tree {
+			label = "qspi-device-tree";
+			reg = <0x70000 0x10000>;
+		};
+		partition@qspi-linux {
+			label = "qspi-linux";
+			reg = <0x80000 0x400000>;
+		};
+		partition@qspi-rootfs {
+			label = "qspi-rootfs";
+			reg = <0x480000 0x1b80000>;
+		};
+	};
+};
+
+&i2c0 {
+	status = "okay";
+	clock-frequency = <400000>;
+};
+
+&i2c1 {
+	status = "okay";
+	clock-frequency = <400000>;
+};
+
+&clkc {
+	ps-clk-frequency = <33333333>;
+};
+
+&sdhci0 {
+	u-boot,dm-pre-reloc;
+	status = "okay";
+};
+
+&uart0 {
+	u-boot,dm-pre-reloc;
+	status = "okay";
+};
+
+&usb0 {
+	status = "okay";
+};
diff --git a/arch/arm/dts/zynq-topic-miamiplus.dts b/arch/arm/dts/zynq-topic-miamiplus.dts
new file mode 100644
index 0000000000..3036f6ea9c
--- /dev/null
+++ b/arch/arm/dts/zynq-topic-miamiplus.dts
@@ -0,0 +1,17 @@
+/*
+ * Topic Miami Plus board DTS
+ *
+ * Copyright (C) 2016 Topic Embedded Products
+ *
+ * SPDX-License-Identifier:	GPL-2.0+
+ */
+#include "zynq-topic-miami.dts"
+
+/ {
+	model = "Topic Miami+ Zynq Board";
+	compatible = "topic,miamiplus", "xlnx,zynq-7000";
+};
+
+&qspi {
+	is-dual = <1>;
+};
diff --git a/arch/arm/dts/zynq-zc702.dts b/arch/arm/dts/zynq-zc702.dts
index 6585010f4b..478e9fd4ef 100644
--- a/arch/arm/dts/zynq-zc702.dts
+++ b/arch/arm/dts/zynq-zc702.dts
@@ -21,7 +21,7 @@
 		mmc0 = &sdhci0;
 	};
 
-	memory {
+	memory@0 {
 		device_type = "memory";
 		reg = <0x0 0x40000000>;
 	};
diff --git a/arch/arm/dts/zynq-zc706.dts b/arch/arm/dts/zynq-zc706.dts
index d04880a2cd..8b0177bc51 100644
--- a/arch/arm/dts/zynq-zc706.dts
+++ b/arch/arm/dts/zynq-zc706.dts
@@ -21,7 +21,7 @@
 		mmc0 = &sdhci0;
 	};
 
-	memory {
+	memory@0 {
 		device_type = "memory";
 		reg = <0x0 0x40000000>;
 	};
diff --git a/arch/arm/dts/zynq-zc770-xm010.dts b/arch/arm/dts/zynq-zc770-xm010.dts
index 33524cb6de..42af313c13 100644
--- a/arch/arm/dts/zynq-zc770-xm010.dts
+++ b/arch/arm/dts/zynq-zc770-xm010.dts
@@ -25,7 +25,7 @@
 		stdout-path = "serial0:115200n8";
 	};
 
-	memory {
+	memory@0 {
 		device_type = "memory";
 		reg = <0x0 0x40000000>;
 	};
diff --git a/arch/arm/dts/zynq-zc770-xm011.dts b/arch/arm/dts/zynq-zc770-xm011.dts
index 463b14b5ea..7f08961491 100644
--- a/arch/arm/dts/zynq-zc770-xm011.dts
+++ b/arch/arm/dts/zynq-zc770-xm011.dts
@@ -23,7 +23,7 @@
 		stdout-path = "serial0:115200n8";
 	};
 
-	memory {
+	memory@0 {
 		device_type = "memory";
 		reg = <0x0 0x40000000>;
 	};
diff --git a/arch/arm/dts/zynq-zc770-xm012.dts b/arch/arm/dts/zynq-zc770-xm012.dts
index 6cab832667..699cd2c0fb 100644
--- a/arch/arm/dts/zynq-zc770-xm012.dts
+++ b/arch/arm/dts/zynq-zc770-xm012.dts
@@ -24,7 +24,7 @@
 		stdout-path = "serial0:115200n8";
 	};
 
-	memory {
+	memory@0 {
 		device_type = "memory";
 		reg = <0x0 0x40000000>;
 	};
diff --git a/arch/arm/dts/zynq-zc770-xm013.dts b/arch/arm/dts/zynq-zc770-xm013.dts
index d5bb4efcc5..07e92b88fb 100644
--- a/arch/arm/dts/zynq-zc770-xm013.dts
+++ b/arch/arm/dts/zynq-zc770-xm013.dts
@@ -25,7 +25,7 @@
 		stdout-path = "serial0:115200n8";
 	};
 
-	memory {
+	memory@0 {
 		device_type = "memory";
 		reg = <0x0 0x40000000>;
 	};
diff --git a/arch/arm/dts/zynq-zed.dts b/arch/arm/dts/zynq-zed.dts
index 4363a4fcac..0ac7532300 100644
--- a/arch/arm/dts/zynq-zed.dts
+++ b/arch/arm/dts/zynq-zed.dts
@@ -20,7 +20,7 @@
 		mmc0 = &sdhci0;
 	};
 
-	memory {
+	memory@0 {
 		device_type = "memory";
 		reg = <0x0 0x20000000>;
 	};
diff --git a/arch/arm/dts/zynq-zybo.dts b/arch/arm/dts/zynq-zybo.dts
index f8dcf1d699..d59a383135 100644
--- a/arch/arm/dts/zynq-zybo.dts
+++ b/arch/arm/dts/zynq-zybo.dts
@@ -20,7 +20,7 @@
 		mmc0 = &sdhci0;
 	};
 
-	memory {
+	memory@0 {
 		device_type = "memory";
 		reg = <0x0 0x20000000>;
 	};
diff --git a/arch/arm/dts/zynqmp-clk.dtsi b/arch/arm/dts/zynqmp-clk.dtsi
index 0918c686d7..aa848c8646 100644
--- a/arch/arm/dts/zynqmp-clk.dtsi
+++ b/arch/arm/dts/zynqmp-clk.dtsi
@@ -114,6 +114,38 @@
 	clocks = <&clk600>, <&clk100>;
 };
 
+&lpd_dma_chan1 {
+	clocks = <&clk600>, <&clk100>;
+};
+
+&lpd_dma_chan2 {
+	clocks = <&clk600>, <&clk100>;
+};
+
+&lpd_dma_chan3 {
+	clocks = <&clk600>, <&clk100>;
+};
+
+&lpd_dma_chan4 {
+	clocks = <&clk600>, <&clk100>;
+};
+
+&lpd_dma_chan5 {
+	clocks = <&clk600>, <&clk100>;
+};
+
+&lpd_dma_chan6 {
+	clocks = <&clk600>, <&clk100>;
+};
+
+&lpd_dma_chan7 {
+	clocks = <&clk600>, <&clk100>;
+};
+
+&lpd_dma_chan8 {
+	clocks = <&clk600>, <&clk100>;
+};
+
 &nand0 {
 	clocks = <&clk100 &clk100>;
 };
diff --git a/arch/arm/dts/zynqmp-ep108-clk.dtsi b/arch/arm/dts/zynqmp-ep108-clk.dtsi
index b3ce0de549..1c2efe459d 100644
--- a/arch/arm/dts/zynqmp-ep108-clk.dtsi
+++ b/arch/arm/dts/zynqmp-ep108-clk.dtsi
@@ -35,6 +35,18 @@
 		clock-accuracy = <100>;
 	};
 
+	clk100: clk100 {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <100000000>;
+	};
+
+	clk600: clk600 {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <600000000>;
+	};
+
 	dp_aud_clk: clock1 {
 		compatible = "fixed-clock";
 		#clock-cells = <0>;
@@ -47,6 +59,42 @@
 	clocks = <&misc_clk &misc_clk>;
 };
 
+&can1 {
+	clocks = <&misc_clk &misc_clk>;
+};
+
+&fpd_dma_chan1 {
+	clocks = <&clk600>, <&clk100>;
+};
+
+&fpd_dma_chan2 {
+	clocks = <&clk600>, <&clk100>;
+};
+
+&fpd_dma_chan3 {
+	clocks = <&clk600>, <&clk100>;
+};
+
+&fpd_dma_chan4 {
+	clocks = <&clk600>, <&clk100>;
+};
+
+&fpd_dma_chan5 {
+	clocks = <&clk600>, <&clk100>;
+};
+
+&fpd_dma_chan6 {
+	clocks = <&clk600>, <&clk100>;
+};
+
+&fpd_dma_chan7 {
+	clocks = <&clk600>, <&clk100>;
+};
+
+&fpd_dma_chan8 {
+	clocks = <&clk600>, <&clk100>;
+};
+
 &gem0 {
 	clocks = <&misc_clk>, <&misc_clk>, <&misc_clk>;
 };
diff --git a/arch/arm/dts/zynqmp-ep108.dts b/arch/arm/dts/zynqmp-ep108.dts
index 0bbf9a7597..2483180d38 100644
--- a/arch/arm/dts/zynqmp-ep108.dts
+++ b/arch/arm/dts/zynqmp-ep108.dts
@@ -31,7 +31,7 @@
 		stdout-path = "serial0:115200n8";
 	};
 
-	memory {
+	memory@0 {
 		device_type = "memory";
 		reg = <0x0 0x0 0x0 0x40000000>;
 	};
@@ -41,6 +41,10 @@
 	status = "okay";
 };
 
+&can1 {
+	status = "okay";
+};
+
 &gem0 {
 	status = "okay";
 	phy-handle = <&phy0>;
@@ -150,10 +154,12 @@
 &sdhci0 {
 	status = "okay";
 	bus-width = <8>;
+	xlnx,mio_bank = <2>;
 };
 
 &sdhci1 {
 	status = "okay";
+	xlnx,mio_bank = <1>;
 };
 
 &spi0 {
diff --git a/arch/arm/dts/zynqmp-zc1751-xm015-dc1.dts b/arch/arm/dts/zynqmp-zc1751-xm015-dc1.dts
index c68a41bea7..b3f42977ab 100644
--- a/arch/arm/dts/zynqmp-zc1751-xm015-dc1.dts
+++ b/arch/arm/dts/zynqmp-zc1751-xm015-dc1.dts
@@ -34,7 +34,7 @@
 		stdout-path = "serial0:115200n8";
 	};
 
-	memory {
+	memory@0 {
 		device_type = "memory";
 		reg = <0x0 0x0 0x0 0x80000000>, <0x8 0x00000000 0x0 0x80000000>;
 	};
@@ -159,12 +159,14 @@
 &sdhci0 {
 	status = "okay";
 	bus-width = <8>;
+	xlnx,mio_bank = <0>;
 };
 
 /* SD1 with level shifter */
 &sdhci1 {
 	status = "okay";
 	no-1-8-v;       /* for 1.0 silicon */
+	xlnx,mio_bank = <1>;
 };
 
 &uart0 {
diff --git a/arch/arm/dts/zynqmp-zc1751-xm016-dc2.dts b/arch/arm/dts/zynqmp-zc1751-xm016-dc2.dts
index 3fdfcc8a11..09a114be16 100644
--- a/arch/arm/dts/zynqmp-zc1751-xm016-dc2.dts
+++ b/arch/arm/dts/zynqmp-zc1751-xm016-dc2.dts
@@ -36,7 +36,7 @@
 		stdout-path = "serial0:115200n8";
 	};
 
-	memory {
+	memory@0 {
 		device_type = "memory";
 		reg = <0x0 0x0 0x0 0x80000000>, <0x8 0x00000000 0x0 0x80000000>;
 	};
diff --git a/arch/arm/dts/zynqmp-zc1751-xm018-dc4.dts b/arch/arm/dts/zynqmp-zc1751-xm018-dc4.dts
index 03f1ad7934..1f03a94820 100644
--- a/arch/arm/dts/zynqmp-zc1751-xm018-dc4.dts
+++ b/arch/arm/dts/zynqmp-zc1751-xm018-dc4.dts
@@ -41,7 +41,7 @@
 		stdout-path = "serial0:115200n8";
 	};
 
-	memory {
+	memory@0 {
 		device_type = "memory";
 		reg = <0x0 0x0 0x0 0x80000000>, <0x8 0x00000000 0x0 0x80000000>;
 	};
diff --git a/arch/arm/dts/zynqmp-zc1751-xm019-dc5.dts b/arch/arm/dts/zynqmp-zc1751-xm019-dc5.dts
index d754f9f904..698e72e0c5 100644
--- a/arch/arm/dts/zynqmp-zc1751-xm019-dc5.dts
+++ b/arch/arm/dts/zynqmp-zc1751-xm019-dc5.dts
@@ -32,7 +32,7 @@
 		stdout-path = "serial0:115200n8";
 	};
 
-	memory {
+	memory@0 {
 		device_type = "memory";
 		reg = <0x0 0x0 0x0 0x80000000>, <0x8 0x00000000 0x0 0x80000000>;
 	};
diff --git a/arch/arm/dts/zynqmp-zcu102.dts b/arch/arm/dts/zynqmp-zcu102.dts
index de99602456..0e9150e6b1 100644
--- a/arch/arm/dts/zynqmp-zcu102.dts
+++ b/arch/arm/dts/zynqmp-zcu102.dts
@@ -12,6 +12,7 @@
 
 #include "zynqmp.dtsi"
 #include "zynqmp-clk.dtsi"
+#include <dt-bindings/gpio/gpio.h>
 
 / {
 	model = "ZynqMP ZCU102 RevA";
@@ -26,6 +27,7 @@
 		rtc0 = &rtc;
 		serial0 = &uart0;
 		serial1 = &uart1;
+		serial2 = &dcc;
 		spi0 = &qspi;
 		usb0 = &usb0;
 	};
@@ -35,16 +37,43 @@
 		stdout-path = "serial0:115200n8";
 	};
 
-	memory {
+	memory@0 {
 		device_type = "memory";
 		reg = <0x0 0x0 0x0 0x80000000>, <0x8 0x00000000 0x0 0x80000000>;
 	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		autorepeat;
+		sw19 {
+			label = "sw19";
+			gpios = <&gpio 22 GPIO_ACTIVE_HIGH>;
+			linux,code = <108>; /* down */
+			gpio-key,wakeup;
+			autorepeat;
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		heartbeat_led {
+			label = "heartbeat";
+			gpios = <&gpio 23 0>;
+			linux,default-trigger = "heartbeat";
+		};
+	};
 };
 
 &can1 {
 	status = "okay";
 };
 
+&dcc {
+	status = "okay";
+};
+
 /* fpd_dma clk 667MHz, lpd_dma 500MHz */
 &fpd_dma_chan1 {
 	status = "okay";
@@ -365,7 +394,7 @@ drivers/hwmon/pmbus/Makefile:11:obj-$(CONFIG_SENSORS_MAX20751)  += max20751.o
 		/* Bus 3 is not connected */
 	};
 
-	/* FIXME PL connection - u55 , PMOD - j160 */
+	/* FIXME PMOD - j160 */
 	/* FIXME MSP430F - u41 - not detected */
 };
 
@@ -576,6 +605,7 @@ drivers/hwmon/pmbus/Makefile:11:obj-$(CONFIG_SENSORS_MAX20751)  += max20751.o
 &sdhci1 {
 	status = "okay";
 	no-1-8-v;	/* for 1.0 silicon */
+	xlnx,mio_bank = <1>;
 };
 
 &uart0 {
diff --git a/arch/arm/dts/zynqmp.dtsi b/arch/arm/dts/zynqmp.dtsi
index 619450e1ba..ab5c243c61 100644
--- a/arch/arm/dts/zynqmp.dtsi
+++ b/arch/arm/dts/zynqmp.dtsi
@@ -45,6 +45,12 @@
 		};
 	};
 
+	dcc: dcc {
+		compatible = "arm,dcc";
+		status = "disabled";
+		u-boot,dm-pre-reloc;
+	};
+
 	power-domains {
 		compatible = "xlnx,zynqmp-genpd";
 
@@ -184,34 +190,14 @@
 			pd-id = <0x30>;
 		};
 
-		pd_ddr: pd-ddr {
-			#power-domain-cells = <0x0>;
-			pd-id = <0x37>;
-		};
-
-		pd_apll: pd-apll {
-			#power-domain-cells = <0x0>;
-			pd-id = <0x32>;
-		};
-
-		pd_vpll: pd-vpll {
+		pd_pcie: pd-pcie {
 			#power-domain-cells = <0x0>;
-			pd-id = <0x33>;
+			pd-id = <0x3b>;
 		};
 
-		pd_dpll: pd-dpll {
+		pd_gpu: pd-gpu {
 			#power-domain-cells = <0x0>;
-			pd-id = <0x34>;
-		};
-
-		pd_rpll: pd-rpll {
-			#power-domain-cells = <0x0>;
-			pd-id = <0x35>;
-		};
-
-		pd_iopll: pd-iopll {
-			#power-domain-cells = <0x0>;
-			pd-id = <0x36>;
+			pd-id = <0x3a 0x14 0x15>;
 		};
 	};
 
@@ -243,7 +229,15 @@
 			     <1 10 0xf01>;
 	};
 
-	amba_apu: amba_apu {
+	edac {
+		compatible = "arm,cortex-a53-edac";
+	};
+
+	pcap {
+		compatible = "xlnx,zynqmp-pcap-fpga";
+	};
+
+	amba_apu: amba_apu@0 {
 		compatible = "simple-bus";
 		#address-cells = <2>;
 		#size-cells = <1>;
@@ -266,14 +260,14 @@
 		compatible = "simple-bus";
 		u-boot,dm-pre-reloc;
 		#address-cells = <2>;
-		#size-cells = <1>;
-		ranges = <0 0 0 0 0xffffffff>;
+		#size-cells = <2>;
+		ranges;
 
 		can0: can@ff060000 {
 			compatible = "xlnx,zynq-can-1.0";
 			status = "disabled";
 			clock-names = "can_clk", "pclk";
-			reg = <0x0 0xff060000 0x1000>;
+			reg = <0x0 0xff060000 0x0 0x1000>;
 			interrupts = <0 23 4>;
 			interrupt-parent = <&gic>;
 			tx-fifo-depth = <0x40>;
@@ -285,7 +279,7 @@
 			compatible = "xlnx,zynq-can-1.0";
 			status = "disabled";
 			clock-names = "can_clk", "pclk";
-			reg = <0x0 0xff070000 0x1000>;
+			reg = <0x0 0xff070000 0x0 0x1000>;
 			interrupts = <0 24 4>;
 			interrupt-parent = <&gic>;
 			tx-fifo-depth = <0x40>;
@@ -295,7 +289,7 @@
 
 		cci: cci@fd6e0000 {
 			compatible = "arm,cci-400";
-			reg = <0x0 0xfd6e0000 0x9000>;
+			reg = <0x0 0xfd6e0000 0x0 0x9000>;
 			ranges = <0x0 0x0 0xfd6e0000 0x10000>;
 			#address-cells = <1>;
 			#size-cells = <1>;
@@ -316,200 +310,228 @@
 		fpd_dma_chan1: dma@fd500000 {
 			status = "disabled";
 			compatible = "xlnx,zynqmp-dma-1.0";
-			reg = <0x0 0xfd500000 0x1000>;
+			reg = <0x0 0xfd500000 0x0 0x1000>;
 			interrupt-parent = <&gic>;
 			interrupts = <0 124 4>;
 			clock-names = "clk_main", "clk_apb";
-			xlnx,id = <0>;
 			xlnx,bus-width = <128>;
+			#stream-id-cells = <1>;
+			iommus = <&smmu 0x14e8>;
 			power-domains = <&pd_gdma>;
 		};
 
 		fpd_dma_chan2: dma@fd510000 {
 			status = "disabled";
 			compatible = "xlnx,zynqmp-dma-1.0";
-			reg = <0x0 0xfd510000 0x1000>;
+			reg = <0x0 0xfd510000 0x0 0x1000>;
 			interrupt-parent = <&gic>;
 			interrupts = <0 125 4>;
 			clock-names = "clk_main", "clk_apb";
-			xlnx,id = <1>;
 			xlnx,bus-width = <128>;
+			#stream-id-cells = <1>;
+			iommus = <&smmu 0x14e9>;
 			power-domains = <&pd_gdma>;
 		};
 
 		fpd_dma_chan3: dma@fd520000 {
 			status = "disabled";
 			compatible = "xlnx,zynqmp-dma-1.0";
-			reg = <0x0 0xfd520000 0x1000>;
+			reg = <0x0 0xfd520000 0x0 0x1000>;
 			interrupt-parent = <&gic>;
 			interrupts = <0 126 4>;
 			clock-names = "clk_main", "clk_apb";
-			xlnx,id = <2>;
 			xlnx,bus-width = <128>;
+			#stream-id-cells = <1>;
+			iommus = <&smmu 0x14ea>;
 			power-domains = <&pd_gdma>;
 		};
 
 		fpd_dma_chan4: dma@fd530000 {
 			status = "disabled";
 			compatible = "xlnx,zynqmp-dma-1.0";
-			reg = <0x0 0xfd530000 0x1000>;
+			reg = <0x0 0xfd530000 0x0 0x1000>;
 			interrupt-parent = <&gic>;
 			interrupts = <0 127 4>;
 			clock-names = "clk_main", "clk_apb";
-			xlnx,id = <3>;
 			xlnx,bus-width = <128>;
+			#stream-id-cells = <1>;
+			iommus = <&smmu 0x14eb>;
 			power-domains = <&pd_gdma>;
 		};
 
 		fpd_dma_chan5: dma@fd540000 {
 			status = "disabled";
 			compatible = "xlnx,zynqmp-dma-1.0";
-			reg = <0x0 0xfd540000 0x1000>;
+			reg = <0x0 0xfd540000 0x0 0x1000>;
 			interrupt-parent = <&gic>;
 			interrupts = <0 128 4>;
 			clock-names = "clk_main", "clk_apb";
-			xlnx,id = <4>;
 			xlnx,bus-width = <128>;
+			#stream-id-cells = <1>;
+			iommus = <&smmu 0x14ec>;
 			power-domains = <&pd_gdma>;
 		};
 
 		fpd_dma_chan6: dma@fd550000 {
 			status = "disabled";
 			compatible = "xlnx,zynqmp-dma-1.0";
-			reg = <0x0 0xfd550000 0x1000>;
+			reg = <0x0 0xfd550000 0x0 0x1000>;
 			interrupt-parent = <&gic>;
 			interrupts = <0 129 4>;
 			clock-names = "clk_main", "clk_apb";
-			xlnx,id = <5>;
 			xlnx,bus-width = <128>;
+			#stream-id-cells = <1>;
+			iommus = <&smmu 0x14ed>;
 			power-domains = <&pd_gdma>;
 		};
 
 		fpd_dma_chan7: dma@fd560000 {
 			status = "disabled";
 			compatible = "xlnx,zynqmp-dma-1.0";
-			reg = <0x0 0xfd560000 0x1000>;
+			reg = <0x0 0xfd560000 0x0 0x1000>;
 			interrupt-parent = <&gic>;
 			interrupts = <0 130 4>;
 			clock-names = "clk_main", "clk_apb";
-			xlnx,id = <6>;
 			xlnx,bus-width = <128>;
+			#stream-id-cells = <1>;
+			iommus = <&smmu 0x14ee>;
 			power-domains = <&pd_gdma>;
 		};
 
 		fpd_dma_chan8: dma@fd570000 {
 			status = "disabled";
 			compatible = "xlnx,zynqmp-dma-1.0";
-			reg = <0x0 0xfd570000 0x1000>;
+			reg = <0x0 0xfd570000 0x0 0x1000>;
 			interrupt-parent = <&gic>;
 			interrupts = <0 131 4>;
 			clock-names = "clk_main", "clk_apb";
-			xlnx,id = <7>;
 			xlnx,bus-width = <128>;
+			#stream-id-cells = <1>;
+			iommus = <&smmu 0x14ef>;
 			power-domains = <&pd_gdma>;
 		};
 
 		gpu: gpu@fd4b0000 {
 			status = "disabled";
 			compatible = "arm,mali-400", "arm,mali-utgard";
-			reg = <0x0 0xfd4b0000 0x30000>;
+			reg = <0x0 0xfd4b0000 0x0 0x30000>;
 			interrupt-parent = <&gic>;
 			interrupts = <0 132 4>, <0 132 4>, <0 132 4>, <0 132 4>, <0 132 4>, <0 132 4>;
 			interrupt-names = "IRQGP", "IRQGPMMU", "IRQPP0", "IRQPPMMU0", "IRQPP1", "IRQPPMMU1";
+			power-domains = <&pd_gpu>;
 		};
 
-		/* ADMA */
+		/* LPDDMA default allows only secured access. inorder to enable
+		 * These dma channels, Users should ensure that these dma
+		 * Channels are allowed for non secure access.
+		 */
 		lpd_dma_chan1: dma@ffa80000 {
 			status = "disabled";
 			compatible = "xlnx,zynqmp-dma-1.0";
-			reg = <0x0 0xffa80000 0x1000>;
+			clock-names = "clk_main", "clk_apb";
+			reg = <0x0 0xffa80000 0x0 0x1000>;
 			interrupt-parent = <&gic>;
 			interrupts = <0 77 4>;
-			xlnx,id = <0>;
 			xlnx,bus-width = <64>;
+			#stream-id-cells = <1>;
+			iommus = <&smmu 0x868>;
 			power-domains = <&pd_adma>;
 		};
 
 		lpd_dma_chan2: dma@ffa90000 {
 			status = "disabled";
 			compatible = "xlnx,zynqmp-dma-1.0";
-			reg = <0x0 0xffa90000 0x1000>;
+			clock-names = "clk_main", "clk_apb";
+			reg = <0x0 0xffa90000 0x0 0x1000>;
 			interrupt-parent = <&gic>;
 			interrupts = <0 78 4>;
-			xlnx,id = <1>;
 			xlnx,bus-width = <64>;
+			#stream-id-cells = <1>;
+			iommus = <&smmu 0x869>;
 			power-domains = <&pd_adma>;
 		};
 
 		lpd_dma_chan3: dma@ffaa0000 {
 			status = "disabled";
 			compatible = "xlnx,zynqmp-dma-1.0";
-			reg = <0x0 0xffaa0000 0x1000>;
+			clock-names = "clk_main", "clk_apb";
+			reg = <0x0 0xffaa0000 0x0 0x1000>;
 			interrupt-parent = <&gic>;
 			interrupts = <0 79 4>;
-			xlnx,id = <2>;
 			xlnx,bus-width = <64>;
+			#stream-id-cells = <1>;
+			iommus = <&smmu 0x86a>;
 			power-domains = <&pd_adma>;
 		};
 
 		lpd_dma_chan4: dma@ffab0000 {
 			status = "disabled";
 			compatible = "xlnx,zynqmp-dma-1.0";
-			reg = <0x0 0xffab0000 0x1000>;
+			clock-names = "clk_main", "clk_apb";
+			reg = <0x0 0xffab0000 0x0 0x1000>;
 			interrupt-parent = <&gic>;
 			interrupts = <0 80 4>;
-			xlnx,id = <3>;
 			xlnx,bus-width = <64>;
+			#stream-id-cells = <1>;
+			iommus = <&smmu 0x86b>;
 			power-domains = <&pd_adma>;
 		};
 
 		lpd_dma_chan5: dma@ffac0000 {
 			status = "disabled";
 			compatible = "xlnx,zynqmp-dma-1.0";
-			reg = <0x0 0xffac0000 0x1000>;
+			clock-names = "clk_main", "clk_apb";
+			reg = <0x0 0xffac0000 0x0 0x1000>;
 			interrupt-parent = <&gic>;
 			interrupts = <0 81 4>;
-			xlnx,id = <4>;
 			xlnx,bus-width = <64>;
+			#stream-id-cells = <1>;
+			iommus = <&smmu 0x86c>;
 			power-domains = <&pd_adma>;
 		};
 
 		lpd_dma_chan6: dma@ffad0000 {
 			status = "disabled";
 			compatible = "xlnx,zynqmp-dma-1.0";
-			reg = <0x0 0xffad0000 0x1000>;
+			clock-names = "clk_main", "clk_apb";
+			reg = <0x0 0xffad0000 0x0 0x1000>;
 			interrupt-parent = <&gic>;
 			interrupts = <0 82 4>;
-			xlnx,id = <5>;
 			xlnx,bus-width = <64>;
+			#stream-id-cells = <1>;
+			iommus = <&smmu 0x86d>;
 			power-domains = <&pd_adma>;
 		};
 
 		lpd_dma_chan7: dma@ffae0000 {
 			status = "disabled";
 			compatible = "xlnx,zynqmp-dma-1.0";
-			reg = <0x0 0xffae0000 0x1000>;
+			clock-names = "clk_main", "clk_apb";
+			reg = <0x0 0xffae0000 0x0 0x1000>;
 			interrupt-parent = <&gic>;
 			interrupts = <0 83 4>;
-			xlnx,id = <6>;
 			xlnx,bus-width = <64>;
+			#stream-id-cells = <1>;
+			iommus = <&smmu 0x86e>;
 			power-domains = <&pd_adma>;
 		};
 
 		lpd_dma_chan8: dma@ffaf0000 {
 			status = "disabled";
 			compatible = "xlnx,zynqmp-dma-1.0";
-			reg = <0x0 0xffaf0000 0x1000>;
+			clock-names = "clk_main", "clk_apb";
+			reg = <0x0 0xffaf0000 0x0 0x1000>;
 			interrupt-parent = <&gic>;
 			interrupts = <0 84 4>;
-			xlnx,id = <7>;
 			xlnx,bus-width = <64>;
+			#stream-id-cells = <1>;
+			iommus = <&smmu 0x86f>;
 			power-domains = <&pd_adma>;
 		};
 
 		mc: memory-controller@fd070000 {
 			compatible = "xlnx,zynqmp-ddrc-2.40a";
-			reg = <0x0 0xfd070000 0x30000>;
+			reg = <0x0 0xfd070000 0x0 0x30000>;
 			interrupt-parent = <&gic>;
 			interrupts = <0 112 4>;
 		};
@@ -517,12 +539,14 @@
 		nand0: nand@ff100000 {
 			compatible = "arasan,nfc-v3p10";
 			status = "disabled";
-			reg = <0x0 0xff100000 0x1000>;
+			reg = <0x0 0xff100000 0x0 0x1000>;
 			clock-names = "clk_sys", "clk_flash";
 			interrupt-parent = <&gic>;
 			interrupts = <0 14 4>;
 			#address-cells = <2>;
 			#size-cells = <1>;
+			#stream-id-cells = <1>;
+			iommus = <&smmu 0x872>;
 			power-domains = <&pd_nand>;
 		};
 
@@ -531,11 +555,12 @@
 			status = "disabled";
 			interrupt-parent = <&gic>;
 			interrupts = <0 57 4>, <0 57 4>;
-			reg = <0x0 0xff0b0000 0x1000>;
+			reg = <0x0 0xff0b0000 0x0 0x1000>;
 			clock-names = "pclk", "hclk", "tx_clk";
 			#address-cells = <1>;
 			#size-cells = <0>;
 			#stream-id-cells = <1>;
+			iommus = <&smmu 0x874>;
 			power-domains = <&pd_eth0>;
 		};
 
@@ -544,11 +569,12 @@
 			status = "disabled";
 			interrupt-parent = <&gic>;
 			interrupts = <0 59 4>, <0 59 4>;
-			reg = <0x0 0xff0c0000 0x1000>;
+			reg = <0x0 0xff0c0000 0x0 0x1000>;
 			clock-names = "pclk", "hclk", "tx_clk";
 			#address-cells = <1>;
 			#size-cells = <0>;
 			#stream-id-cells = <1>;
+			iommus = <&smmu 0x875>;
 			power-domains = <&pd_eth1>;
 		};
 
@@ -557,11 +583,12 @@
 			status = "disabled";
 			interrupt-parent = <&gic>;
 			interrupts = <0 61 4>, <0 61 4>;
-			reg = <0x0 0xff0d0000 0x1000>;
+			reg = <0x0 0xff0d0000 0x0 0x1000>;
 			clock-names = "pclk", "hclk", "tx_clk";
 			#address-cells = <1>;
 			#size-cells = <0>;
 			#stream-id-cells = <1>;
+			iommus = <&smmu 0x876>;
 			power-domains = <&pd_eth2>;
 		};
 
@@ -570,11 +597,12 @@
 			status = "disabled";
 			interrupt-parent = <&gic>;
 			interrupts = <0 63 4>, <0 63 4>;
-			reg = <0x0 0xff0e0000 0x1000>;
+			reg = <0x0 0xff0e0000 0x0 0x1000>;
 			clock-names = "pclk", "hclk", "tx_clk";
 			#address-cells = <1>;
 			#size-cells = <0>;
 			#stream-id-cells = <1>;
+			iommus = <&smmu 0x877>;
 			power-domains = <&pd_eth3>;
 		};
 
@@ -582,11 +610,11 @@
 			compatible = "xlnx,zynqmp-gpio-1.0";
 			status = "disabled";
 			#gpio-cells = <0x2>;
-			#interrupt-cells = <2>;
-			interrupt-controller;
 			interrupt-parent = <&gic>;
 			interrupts = <0 16 4>;
-			reg = <0x0 0xff0a0000 0x1000>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			reg = <0x0 0xff0a0000 0x0 0x1000>;
 			power-domains = <&pd_gpio>;
 		};
 
@@ -595,7 +623,7 @@
 			status = "disabled";
 			interrupt-parent = <&gic>;
 			interrupts = <0 17 4>;
-			reg = <0x0 0xff020000 0x1000>;
+			reg = <0x0 0xff020000 0x0 0x1000>;
 			#address-cells = <1>;
 			#size-cells = <0>;
 			power-domains = <&pd_i2c0>;
@@ -606,35 +634,47 @@
 			status = "disabled";
 			interrupt-parent = <&gic>;
 			interrupts = <0 18 4>;
-			reg = <0x0 0xff030000 0x1000>;
+			reg = <0x0 0xff030000 0x0 0x1000>;
 			#address-cells = <1>;
 			#size-cells = <0>;
 			power-domains = <&pd_i2c1>;
 		};
 
+		ocm: memory-controller@ff960000 {
+			compatible = "xlnx,zynqmp-ocmc-1.0";
+			reg = <0x0 0xff960000 0x0 0x1000>;
+			interrupt-parent = <&gic>;
+			interrupts = <0 10 4>;
+		};
+
 		pcie: pcie@fd0e0000 {
 			compatible = "xlnx,nwl-pcie-2.11";
 			status = "disabled";
 			#address-cells = <3>;
 			#size-cells = <2>;
 			#interrupt-cells = <1>;
+			msi-controller;
 			device_type = "pci";
 			interrupt-parent = <&gic>;
 			interrupts = <0 118 4>,
+				     <0 117 4>,
 				     <0 116 4>,
 				     <0 115 4>,	/* MSI_1 [63...32] */
 				     <0 114 4>;	/* MSI_0 [31...0] */
-			interrupt-names = "misc", "intx", "msi_1", "msi_0";
-			reg = <0x0 0xfd0e0000 0x1000>,
-			      <0x0 0xfd480000 0x1000>,
-			      <0x0 0xe0000000 0x1000000>;
+			interrupt-names = "misc","dummy","intx", "msi1", "msi0";
+			msi-parent = <&pcie>;
+			reg = <0x0 0xfd0e0000 0x0 0x1000>,
+			      <0x0 0xfd480000 0x0 0x1000>,
+			      <0x80 0x00000000 0x0 0x1000000>;
 			reg-names = "breg", "pcireg", "cfg";
-			ranges = <0x02000000 0x00000000 0xe1000000 0x00000000 0xe1000000 0 0x0f000000>;
+			ranges = <0x02000000 0x00000000 0xe0000000 0x00000000 0xe0000000 0x00000000 0x10000000	/* non-prefetchable memory */
+				  0x43000000 0x00000006 0x00000000 0x00000006 0x00000000 0x00000002 0x00000000>;/* prefetchable memory */
 			interrupt-map-mask = <0x0 0x0 0x0 0x7>;
 			interrupt-map = <0x0 0x0 0x0 0x1 &pcie_intc 0x1>,
 					<0x0 0x0 0x0 0x2 &pcie_intc 0x2>,
 					<0x0 0x0 0x0 0x3 &pcie_intc 0x3>,
 					<0x0 0x0 0x0 0x4 &pcie_intc 0x4>;
+			power-domains = <&pd_pcie>;
 			pcie_intc: legacy-interrupt-controller {
 				interrupt-controller;
 				#address-cells = <0>;
@@ -649,26 +689,51 @@
 			interrupts = <0 15 4>;
 			interrupt-parent = <&gic>;
 			num-cs = <1>;
-			reg = <0x0 0xff0f0000 0x1000>,
-			      <0x0 0xc0000000 0x8000000>;
+			reg = <0x0 0xff0f0000 0x0 0x1000>,
+			      <0x0 0xc0000000 0x0 0x8000000>;
 			#address-cells = <1>;
 			#size-cells = <0>;
+			#stream-id-cells = <1>;
+			iommus = <&smmu 0x873>;
 			power-domains = <&pd_qspi>;
 		};
 
 		rtc: rtc@ffa60000 {
 			compatible = "xlnx,zynqmp-rtc";
 			status = "disabled";
-			reg = <0x0 0xffa60000 0x100>;
+			reg = <0x0 0xffa60000 0x0 0x100>;
 			interrupt-parent = <&gic>;
 			interrupts = <0 26 4>, <0 27 4>;
 			interrupt-names = "alarm", "sec";
 		};
 
+		serdes: zynqmp_phy@fd400000 {
+			compatible = "xlnx,zynqmp-psgtr";
+			status = "disabled";
+			reg = <0x0 0xfd400000 0x0 0x40000>,
+			      <0x0 0xfd3d0000 0x0 0x1000>,
+			      <0x0 0xfd1a0000 0x0 0x1000>,
+			      <0x0 0xff5e0000 0x0 0x1000>;
+			reg-names = "serdes", "siou", "fpd", "lpd";
+			xlnx,tx_termination_fix;
+			lane0: lane0 {
+				#phy-cells = <4>;
+			};
+			lane1: lane1 {
+				#phy-cells = <4>;
+			};
+			lane2: lane2 {
+				#phy-cells = <4>;
+			};
+			lane3: lane3 {
+				#phy-cells = <4>;
+			};
+		};
+
 		sata: ahci@fd0c0000 {
 			compatible = "ceva,ahci-1v84";
 			status = "disabled";
-			reg = <0x0 0xfd0c0000 0x2000>;
+			reg = <0x0 0xfd0c0000 0x0 0x2000>;
 			interrupt-parent = <&gic>;
 			interrupts = <0 133 4>;
 			power-domains = <&pd_sata>;
@@ -676,31 +741,36 @@
 
 		sdhci0: sdhci@ff160000 {
 			u-boot,dm-pre-reloc;
-			compatible = "arasan,sdhci-8.9a";
+			compatible = "xlnx,zynqmp-8.9a", "arasan,sdhci-8.9a";
 			status = "disabled";
 			interrupt-parent = <&gic>;
 			interrupts = <0 48 4>;
-			reg = <0x0 0xff160000 0x1000>;
+			reg = <0x0 0xff160000 0x0 0x1000>;
 			clock-names = "clk_xin", "clk_ahb";
-			broken-tuning;
+			xlnx,device_id = <0>;
+			#stream-id-cells = <1>;
+			iommus = <&smmu 0x870>;
 			power-domains = <&pd_sd0>;
 		};
 
 		sdhci1: sdhci@ff170000 {
 			u-boot,dm-pre-reloc;
-			compatible = "arasan,sdhci-8.9a";
+			compatible = "xlnx,zynqmp-8.9a", "arasan,sdhci-8.9a";
 			status = "disabled";
 			interrupt-parent = <&gic>;
 			interrupts = <0 49 4>;
-			reg = <0x0 0xff170000 0x1000>;
+			reg = <0x0 0xff170000 0x0 0x1000>;
 			clock-names = "clk_xin", "clk_ahb";
-			broken-tuning;
+			xlnx,device_id = <1>;
+			#stream-id-cells = <1>;
+			iommus = <&smmu 0x871>;
 			power-domains = <&pd_sd1>;
 		};
 
 		smmu: smmu@fd800000 {
 			compatible = "arm,mmu-500";
-			reg = <0x0 0xfd800000 0x20000>;
+			reg = <0x0 0xfd800000 0x0 0x20000>;
+			#iommu-cells = <1>;
 			#global-interrupts = <1>;
 			interrupt-parent = <&gic>;
 			interrupts = <0 155 4>,
@@ -711,7 +781,29 @@
 			mmu-masters = < &gem0 0x874
 					&gem1 0x875
 					&gem2 0x876
-					&gem3 0x877 >;
+					&gem3 0x877
+					&usb0 0x860
+					&usb1 0x861
+					&qspi 0x873
+					&lpd_dma_chan1 0x868
+					&lpd_dma_chan2 0x869
+					&lpd_dma_chan3 0x86a
+					&lpd_dma_chan4 0x86b
+					&lpd_dma_chan5 0x86c
+					&lpd_dma_chan6 0x86d
+					&lpd_dma_chan7 0x86e
+					&lpd_dma_chan8 0x86f
+					&fpd_dma_chan1 0x14e8
+					&fpd_dma_chan2 0x14e9
+					&fpd_dma_chan3 0x14ea
+					&fpd_dma_chan4 0x14eb
+					&fpd_dma_chan5 0x14ec
+					&fpd_dma_chan6 0x14ed
+					&fpd_dma_chan7 0x14ee
+					&fpd_dma_chan8 0x14ef
+					&sdhci0 0x870
+					&sdhci1 0x871
+					&nand0 0x872>;
 		};
 
 		spi0: spi@ff040000 {
@@ -719,7 +811,7 @@
 			status = "disabled";
 			interrupt-parent = <&gic>;
 			interrupts = <0 19 4>;
-			reg = <0x0 0xff040000 0x1000>;
+			reg = <0x0 0xff040000 0x0 0x1000>;
 			clock-names = "ref_clk", "pclk";
 			#address-cells = <1>;
 			#size-cells = <0>;
@@ -731,7 +823,7 @@
 			status = "disabled";
 			interrupt-parent = <&gic>;
 			interrupts = <0 20 4>;
-			reg = <0x0 0xff050000 0x1000>;
+			reg = <0x0 0xff050000 0x0 0x1000>;
 			clock-names = "ref_clk", "pclk";
 			#address-cells = <1>;
 			#size-cells = <0>;
@@ -743,7 +835,7 @@
 			status = "disabled";
 			interrupt-parent = <&gic>;
 			interrupts = <0 36 4>, <0 37 4>, <0 38 4>;
-			reg = <0x0 0xff110000 0x1000>;
+			reg = <0x0 0xff110000 0x0 0x1000>;
 			timer-width = <32>;
 			power-domains = <&pd_ttc0>;
 		};
@@ -753,7 +845,7 @@
 			status = "disabled";
 			interrupt-parent = <&gic>;
 			interrupts = <0 39 4>, <0 40 4>, <0 41 4>;
-			reg = <0x0 0xff120000 0x1000>;
+			reg = <0x0 0xff120000 0x0 0x1000>;
 			timer-width = <32>;
 			power-domains = <&pd_ttc1>;
 		};
@@ -763,7 +855,7 @@
 			status = "disabled";
 			interrupt-parent = <&gic>;
 			interrupts = <0 42 4>, <0 43 4>, <0 44 4>;
-			reg = <0x0 0xff130000 0x1000>;
+			reg = <0x0 0xff130000 0x0 0x1000>;
 			timer-width = <32>;
 			power-domains = <&pd_ttc2>;
 		};
@@ -773,7 +865,7 @@
 			status = "disabled";
 			interrupt-parent = <&gic>;
 			interrupts = <0 45 4>, <0 46 4>, <0 47 4>;
-			reg = <0x0 0xff140000 0x1000>;
+			reg = <0x0 0xff140000 0x0 0x1000>;
 			timer-width = <32>;
 			power-domains = <&pd_ttc3>;
 		};
@@ -784,7 +876,7 @@
 			status = "disabled";
 			interrupt-parent = <&gic>;
 			interrupts = <0 21 4>;
-			reg = <0x0 0xff000000 0x1000>;
+			reg = <0x0 0xff000000 0x0 0x1000>;
 			clock-names = "uart_clk", "pclk";
 			power-domains = <&pd_uart0>;
 		};
@@ -795,25 +887,27 @@
 			status = "disabled";
 			interrupt-parent = <&gic>;
 			interrupts = <0 22 4>;
-			reg = <0x0 0xff010000 0x1000>;
+			reg = <0x0 0xff010000 0x0 0x1000>;
 			clock-names = "uart_clk", "pclk";
 			power-domains = <&pd_uart1>;
 		};
 
-		usb0: usb@fe200000 {
+		usb0: usb0 {
 			#address-cells = <2>;
-			#size-cells = <1>;
+			#size-cells = <2>;
 			status = "disabled";
 			compatible = "xlnx,zynqmp-dwc3";
 			clock-names = "bus_clk", "ref_clk";
 			clocks = <&clk125>, <&clk125>;
+			#stream-id-cells = <1>;
+			iommus = <&smmu 0x860>;
 			power-domains = <&pd_usb0>;
 			ranges;
 
 			dwc3_0: dwc3@fe200000 {
 				compatible = "snps,dwc3";
 				status = "disabled";
-				reg = <0x0 0xfe200000 0x40000>;
+				reg = <0x0 0xfe200000 0x0 0x40000>;
 				interrupt-parent = <&gic>;
 				interrupts = <0 65 4>;
 				/* snps,quirk-frame-length-adjustment = <0x20>; */
@@ -821,20 +915,22 @@
 			};
 		};
 
-		usb1: usb@fe300000 {
+		usb1: usb1 {
 			#address-cells = <2>;
-			#size-cells = <1>;
+			#size-cells = <2>;
 			status = "disabled";
 			compatible = "xlnx,zynqmp-dwc3";
 			clock-names = "bus_clk", "ref_clk";
 			clocks = <&clk125>, <&clk125>;
+			#stream-id-cells = <1>;
+			iommus = <&smmu 0x861>;
 			power-domains = <&pd_usb1>;
 			ranges;
 
 			dwc3_1: dwc3@fe300000 {
 				compatible = "snps,dwc3";
 				status = "disabled";
-				reg = <0x0 0xfe300000 0x40000>;
+				reg = <0x0 0xfe300000 0x0 0x40000>;
 				interrupt-parent = <&gic>;
 				interrupts = <0 70 4>;
 				/* snps,quirk-frame-length-adjustment = <0x20>; */
@@ -847,7 +943,7 @@
 			status = "disabled";
 			interrupt-parent = <&gic>;
 			interrupts = <0 113 1>;
-			reg = <0x0 0xfd4d0000 0x1000>;
+			reg = <0x0 0xfd4d0000 0x0 0x1000>;
 			timeout-sec = <10>;
 		};
 
@@ -861,11 +957,13 @@
 				xlnx,pixel-format = "rgb565";
 				plane0 {
 					dmas = <&xlnx_dpdma 3>;
-					dma-names = "dma";
+					dma-names = "dma0";
 				};
 				plane1 {
-					dmas = <&xlnx_dpdma 0>;
-					dma-names = "dma";
+					dmas = <&xlnx_dpdma 0>,
+					       <&xlnx_dpdma 1>,
+					       <&xlnx_dpdma 2>;
+					dma-names = "dma0", "dma1", "dma2";
 				};
 			};
 		};
@@ -873,8 +971,7 @@
 		xlnx_dp: dp@fd4a0000 {
 			compatible = "xlnx,v-dp";
 			status = "disabled";
-			reg = <0x0 0xfd4a0000 0x1000>,
-			      <0x0 0xfd400000 0x20000>;
+			reg = <0x0 0xfd4a0000 0x0 0x1000>;
 			interrupts = <0 119 4>;
 			interrupt-parent = <&gic>;
 			clock-names = "aclk", "aud_clk";
@@ -920,9 +1017,9 @@
 		xlnx_dp_sub: dp_sub@fd4aa000 {
 			compatible = "xlnx,dp-sub";
 			status = "disabled";
-			reg = <0x0 0xfd4aa000 0x1000>,
-			      <0x0 0xfd4ab000 0x1000>,
-			      <0x0 0xfd4ac000 0x1000>;
+			reg = <0x0 0xfd4aa000 0x0 0x1000>,
+			      <0x0 0xfd4ab000 0x0 0x1000>,
+			      <0x0 0xfd4ac000 0x0 0x1000>;
 			reg-names = "blend", "av_buf", "aud";
 			xlnx,output-fmt = "rgb";
 			xlnx,vid-fmt = "yuyv";
@@ -932,28 +1029,28 @@
 		xlnx_dpdma: dma@fd4c0000 {
 			compatible = "xlnx,dpdma";
 			status = "disabled";
-			reg = <0x0 0xfd4c0000 0x1000>;
+			reg = <0x0 0xfd4c0000 0x0 0x1000>;
 			interrupts = <0 122 4>;
 			interrupt-parent = <&gic>;
 			clock-names = "axi_clk";
 			dma-channels = <6>;
 			#dma-cells = <1>;
-			dma-video0channel@fd4c0000 {
+			dma-video0channel {
 				compatible = "xlnx,video0";
 			};
-			dma-video1channel@fd4c0000 {
+			dma-video1channel {
 				compatible = "xlnx,video1";
 			};
-			dma-video2channel@fd4c0000 {
+			dma-video2channel {
 				compatible = "xlnx,video2";
 			};
-			dma-graphicschannel@fd4c0000 {
+			dma-graphicschannel {
 				compatible = "xlnx,graphics";
 			};
-			dma-audio0channel@fd4c0000 {
+			dma-audio0channel {
 				compatible = "xlnx,audio0";
 			};
-			dma-audio1channel@fd4c0000 {
+			dma-audio1channel {
 				compatible = "xlnx,audio1";
 			};
 		};
diff --git a/arch/arm/include/asm/arch-am33xx/sys_proto.h b/arch/arm/include/asm/arch-am33xx/sys_proto.h
index ed1a46c2e7..0c5792baa8 100644
--- a/arch/arm/include/asm/arch-am33xx/sys_proto.h
+++ b/arch/arm/include/asm/arch-am33xx/sys_proto.h
@@ -19,6 +19,7 @@ u32 get_sysboot_value(void);
 extern struct ctrl_stat *cstat;
 u32 get_device_type(void);
 void save_omap_boot_params(void);
+void setup_early_clocks(void);
 void setup_clocks_for_console(void);
 void mpu_pll_config_val(int mpull_m);
 void ddr_pll_config(unsigned int ddrpll_M);
@@ -44,3 +45,4 @@ int am335x_get_tps65910_mpu_vdd(int sil_rev, int frequency);
 
 void enable_usb_clocks(int index);
 void disable_usb_clocks(int index);
+void do_board_detect(void);
diff --git a/arch/arm/include/asm/arch-fsl-layerscape/config.h b/arch/arm/include/asm/arch-fsl-layerscape/config.h
index 4201e0fbec..6c3ba494f8 100644
--- a/arch/arm/include/asm/arch-fsl-layerscape/config.h
+++ b/arch/arm/include/asm/arch-fsl-layerscape/config.h
@@ -25,6 +25,7 @@
 #ifndef L1_CACHE_BYTES
 #define L1_CACHE_SHIFT		6
 #define L1_CACHE_BYTES		BIT(L1_CACHE_SHIFT)
+#define CONFIG_FSL_TZASC_400
 #endif
 
 #define CONFIG_SYS_FSL_OCRAM_BASE	0x18000000	/* initial RAM */
diff --git a/arch/arm/include/asm/arch-fsl-layerscape/cpu.h b/arch/arm/include/asm/arch-fsl-layerscape/cpu.h
index e2d96a1b78..a97be5c098 100644
--- a/arch/arm/include/asm/arch-fsl-layerscape/cpu.h
+++ b/arch/arm/include/asm/arch-fsl-layerscape/cpu.h
@@ -11,6 +11,10 @@ static struct cpu_type cpu_type_list[] = {
 	CPU_TYPE_ENTRY(LS2080A, LS2080A, 8),
 	CPU_TYPE_ENTRY(LS2085A, LS2085A, 8),
 	CPU_TYPE_ENTRY(LS2045A, LS2045A, 4),
+	CPU_TYPE_ENTRY(LS2088A, LS2088A, 8),
+	CPU_TYPE_ENTRY(LS2084A, LS2084A, 8),
+	CPU_TYPE_ENTRY(LS2048A, LS2048A, 4),
+	CPU_TYPE_ENTRY(LS2044A, LS2044A, 4),
 	CPU_TYPE_ENTRY(LS1043A, LS1043A, 4),
 	CPU_TYPE_ENTRY(LS1023A, LS1023A, 2),
 	CPU_TYPE_ENTRY(LS1046A, LS1046A, 4),
diff --git a/arch/arm/include/asm/arch-fsl-layerscape/immap_lsch3.h b/arch/arm/include/asm/arch-fsl-layerscape/immap_lsch3.h
index 7acba2730a..2df56f7a5b 100644
--- a/arch/arm/include/asm/arch-fsl-layerscape/immap_lsch3.h
+++ b/arch/arm/include/asm/arch-fsl-layerscape/immap_lsch3.h
@@ -23,10 +23,12 @@
 #define CONFIG_SYS_IFC_ADDR			(CONFIG_SYS_IMMR + 0x01240000)
 #define CONFIG_SYS_NS16550_COM1			(CONFIG_SYS_IMMR + 0x011C0500)
 #define CONFIG_SYS_NS16550_COM2			(CONFIG_SYS_IMMR + 0x011C0600)
-#define CONFIG_SYS_FSL_TIMER_ADDR		0x023d0000
+#define SYS_FSL_LS2080A_LS2085A_TIMER_ADDR	0x023d0000
+#define CONFIG_SYS_FSL_TIMER_ADDR		0x023e0000
 #define CONFIG_SYS_FSL_PMU_CLTBENR		(CONFIG_SYS_FSL_PMU_ADDR + \
 						 0x18A0)
 #define FSL_PMU_PCTBENR_OFFSET (CONFIG_SYS_FSL_PMU_ADDR + 0x8A0)
+#define FSL_LSCH3_SVR		(CONFIG_SYS_FSL_GUTS_ADDR + 0xA4)
 
 #define CONFIG_SYS_FSL_WRIOP1_ADDR		(CONFIG_SYS_IMMR + 0x7B80000)
 #define CONFIG_SYS_FSL_WRIOP1_MDIO1	(CONFIG_SYS_FSL_WRIOP1_ADDR + 0x16000)
@@ -153,7 +155,7 @@
 #define TP_CLUSTER_INIT_MASK	0x0000003f	/* initiator mask */
 #define TP_INIT_PER_CLUSTER     4
 /* This is chassis generation 3 */
-
+#ifndef __ASSEMBLY__
 struct sys_info {
 	unsigned long freq_processor[CONFIG_MAX_CPUS];
 	unsigned long freq_systembus;
@@ -317,6 +319,5 @@ struct ccsr_reset {
 	u32 ip_rev2;			/* 0xbfc */
 };
 
-uint get_svr(void);
-
+#endif /*__ASSEMBLY__*/
 #endif /* __ARCH_FSL_LSCH3_IMMAP_H_ */
diff --git a/arch/arm/include/asm/arch-fsl-layerscape/mp.h b/arch/arm/include/asm/arch-fsl-layerscape/mp.h
index f7306ff266..d0832b54bc 100644
--- a/arch/arm/include/asm/arch-fsl-layerscape/mp.h
+++ b/arch/arm/include/asm/arch-fsl-layerscape/mp.h
@@ -13,6 +13,7 @@
 *      uint64_t entry_addr;
 *      uint64_t status;
 *      uint64_t lpid;
+*      uint64_t os_arch;
 * };
 * we pad this struct to 64 bytes so each entry is in its own cacheline
 * the actual spin table is an array of these structures
@@ -20,6 +21,7 @@
 #define SPIN_TABLE_ELEM_ENTRY_ADDR_IDX	0
 #define SPIN_TABLE_ELEM_STATUS_IDX	1
 #define SPIN_TABLE_ELEM_LPID_IDX	2
+#define SPIN_TABLE_ELEM_OS_ARCH_IDX	3
 #define WORDS_PER_SPIN_TABLE_ENTRY	8	/* pad to 64 bytes */
 #define SPIN_TABLE_ELEM_SIZE		64
 
@@ -36,4 +38,8 @@ void secondary_boot_func(void);
 int is_core_online(u64 cpu_id);
 u32 cpu_pos_mask(void);
 #endif
+
+#define IH_ARCH_ARM		2	/* ARM */
+#define IH_ARCH_ARM64		22	/* ARM64 */
+
 #endif /* _FSL_LAYERSCAPE_MP_H */
diff --git a/arch/arm/include/asm/arch-fsl-layerscape/soc.h b/arch/arm/include/asm/arch-fsl-layerscape/soc.h
index 58e90d8d88..78363b602c 100644
--- a/arch/arm/include/asm/arch-fsl-layerscape/soc.h
+++ b/arch/arm/include/asm/arch-fsl-layerscape/soc.h
@@ -30,7 +30,7 @@
 #define pex_lut_in32(a)       in_be32(a)
 #define pex_lut_out32(a, v)   out_be32(a, v)
 #endif
-
+#ifndef __ASSEMBLY__
 struct cpu_type {
 	char name[15];
 	u32 soc_ver;
@@ -39,7 +39,7 @@ struct cpu_type {
 
 #define CPU_TYPE_ENTRY(n, v, nc) \
 	{ .name = #n, .soc_ver = SVR_##v, .num_cores = (nc)}
-
+#endif
 #define SVR_WO_E		0xFFFFFE
 #define SVR_LS1012A		0x870400
 #define SVR_LS1043A		0x879200
@@ -50,6 +50,12 @@ struct cpu_type {
 #define SVR_LS2080A		0x870110
 #define SVR_LS2085A		0x870100
 #define SVR_LS2040A		0x870130
+#define SVR_LS2088A		0x870900
+#define SVR_LS2084A		0x870910
+#define SVR_LS2048A		0x870920
+#define SVR_LS2044A		0x870930
+
+#define SVR_DEV_LS2080A		0x8701
 
 #define SVR_MAJ(svr)		(((svr) >> 4) & 0xf)
 #define SVR_MIN(svr)		(((svr) >> 0) & 0xf)
@@ -63,6 +69,7 @@ struct cpu_type {
 #define AHCI_PORT_TRANS_CFG    0x08000029
 #define AHCI_PORT_AXICC_CFG	0x3fffffff
 
+#ifndef __ASSEMBLY__
 /* AHCI (sata) register map */
 struct ccsr_ahci {
 	u32 res1[0xa4/4];	/* 0x0 - 0xa4 */
@@ -105,4 +112,5 @@ void erratum_a010315(void);
 
 bool soc_has_dp_ddr(void);
 bool soc_has_aiop(void);
+#endif
 #endif /* _ASM_ARMV8_FSL_LAYERSCAPE_SOC_H_ */
diff --git a/arch/arm/include/asm/arch-mvebu/spi.h b/arch/arm/include/asm/arch-mvebu/spi.h
index 78869a253d..3545aed173 100644
--- a/arch/arm/include/asm/arch-mvebu/spi.h
+++ b/arch/arm/include/asm/arch-mvebu/spi.h
@@ -52,6 +52,10 @@ struct kwspi_registers {
 #define KWSPI_ADRLEN_3BYTE	(2 << 8)
 #define KWSPI_ADRLEN_4BYTE	(3 << 8)
 #define KWSPI_ADRLEN_MASK	(3 << 8)
+#define KWSPI_CPOL		(1 << 11)
+#define KWSPI_CPHA		(1 << 12)
+#define KWSPI_TXLSBF		(1 << 13)
+#define KWSPI_RXLSBF		(1 << 14)
 
 #define KWSPI_IRQUNMASK		1 /* unmask SPI interrupt */
 #define KWSPI_IRQMASK		0 /* mask SPI interrupt */
diff --git a/arch/arm/include/asm/arch-zynqmp/hardware.h b/arch/arm/include/asm/arch-zynqmp/hardware.h
index 456c1b0902..e7738faaf8 100644
--- a/arch/arm/include/asm/arch-zynqmp/hardware.h
+++ b/arch/arm/include/asm/arch-zynqmp/hardware.h
@@ -79,6 +79,7 @@ struct iou_scntr_secure {
 #define NAND_MODE	0x00000004
 #define EMMC_MODE	0x00000006
 #define USB_MODE	0x00000007
+#define SD1_LSHFT_MODE	0x0000000E /* SD1 Level shifter */
 #define JTAG_MODE	0x00000000
 #define BOOT_MODE_USE_ALT	0x100
 #define BOOT_MODE_ALT_SHIFT	12
diff --git a/arch/arm/include/asm/global_data.h b/arch/arm/include/asm/global_data.h
index 10550174df..aee87cdcbf 100644
--- a/arch/arm/include/asm/global_data.h
+++ b/arch/arm/include/asm/global_data.h
@@ -60,7 +60,7 @@ struct arch_global_data {
 	unsigned long tlb_allocated;
 #endif
 
-#ifdef CONFIG_OMAP_COMMON
+#ifdef CONFIG_ARCH_OMAP2
 	u32 omap_boot_device;
 	u32 omap_boot_mode;
 	u8 omap_ch_flags;
diff --git a/arch/arm/include/asm/macro.h b/arch/arm/include/asm/macro.h
index 9bb0efa5ff..2553e3e349 100644
--- a/arch/arm/include/asm/macro.h
+++ b/arch/arm/include/asm/macro.h
@@ -8,6 +8,11 @@
 
 #ifndef __ASM_ARM_MACRO_H__
 #define __ASM_ARM_MACRO_H__
+
+#ifdef CONFIG_ARM64
+#include <asm/system.h>
+#endif
+
 #ifdef __ASSEMBLY__
 
 /*
@@ -135,13 +140,21 @@ lr	.req	x30
 #endif
 .endm
 
-.macro armv8_switch_to_el2_m, xreg1
-	/* 64bit EL2 | HCE | SMD | RES1 (Bits[5:4]) | Non-secure EL0/EL1 */
-	mov	\xreg1, #0x5b1
-	msr	scr_el3, \xreg1
+/*
+ * Switch from EL3 to EL2 for ARMv8
+ * @ep:     kernel entry point
+ * @flag:   The execution state flag for lower exception
+ *          level, ES_TO_AARCH64 or ES_TO_AARCH32
+ * @tmp:    temporary register
+ *
+ * For loading 32-bit OS, x1 is machine nr and x2 is ftaddr.
+ * For loading 64-bit OS, x0 is physical address to the FDT blob.
+ * They will be passed to the guest.
+ */
+.macro armv8_switch_to_el2_m, ep, flag, tmp
 	msr	cptr_el3, xzr		/* Disable coprocessor traps to EL3 */
-	mov	\xreg1, #0x33ff
-	msr	cptr_el2, \xreg1	/* Disable coprocessor traps to EL2 */
+	mov	\tmp, #CPTR_EL2_RES1
+	msr	cptr_el2, \tmp		/* Disable coprocessor traps to EL2 */
 
 	/* Initialize Generic Timers */
 	msr	cntvoff_el2, xzr
@@ -152,45 +165,90 @@ lr	.req	x30
 	 * and RES0 bits (31,30,27,26,24,21,20,17,15-13,10-6) +
 	 * EE,WXN,I,SA,C,A,M to 0
 	 */
-	mov	\xreg1, #0x0830
-	movk	\xreg1, #0x30C5, lsl #16
-	msr	sctlr_el2, \xreg1
+	ldr	\tmp, =(SCTLR_EL2_RES1 | SCTLR_EL2_EE_LE |\
+			SCTLR_EL2_WXN_DIS | SCTLR_EL2_ICACHE_DIS |\
+			SCTLR_EL2_SA_DIS | SCTLR_EL2_DCACHE_DIS |\
+			SCTLR_EL2_ALIGN_DIS | SCTLR_EL2_MMU_DIS)
+	msr	sctlr_el2, \tmp
+
+	mov	\tmp, sp
+	msr	sp_el2, \tmp		/* Migrate SP */
+	mrs	\tmp, vbar_el3
+	msr	vbar_el2, \tmp		/* Migrate VBAR */
+
+	/* Check switch to AArch64 EL2 or AArch32 Hypervisor mode */
+	cmp	\flag, #ES_TO_AARCH32
+	b.eq	1f
+
+	/*
+	 * The next lower exception level is AArch64, 64bit EL2 | HCE |
+	 * SMD | RES1 (Bits[5:4]) | Non-secure EL0/EL1.
+	 */
+	ldr	\tmp, =(SCR_EL3_RW_AARCH64 | SCR_EL3_HCE_EN |\
+			SCR_EL3_SMD_DIS | SCR_EL3_RES1 |\
+			SCR_EL3_NS_EN)
+	msr	scr_el3, \tmp
 
 	/* Return to the EL2_SP2 mode from EL3 */
-	mov	\xreg1, sp
-	msr	sp_el2, \xreg1		/* Migrate SP */
-	mrs	\xreg1, vbar_el3
-	msr	vbar_el2, \xreg1	/* Migrate VBAR */
-	mov	\xreg1, #0x3c9
-	msr	spsr_el3, \xreg1	/* EL2_SP2 | D | A | I | F */
-	msr	elr_el3, lr
+	ldr	\tmp, =(SPSR_EL_DEBUG_MASK | SPSR_EL_SERR_MASK |\
+			SPSR_EL_IRQ_MASK | SPSR_EL_FIQ_MASK |\
+			SPSR_EL_M_AARCH64 | SPSR_EL_M_EL2H)
+	msr	spsr_el3, \tmp
+	msr	elr_el3, \ep
+	eret
+
+1:
+	/*
+	 * The next lower exception level is AArch32, 32bit EL2 | HCE |
+	 * SMD | RES1 (Bits[5:4]) | Non-secure EL0/EL1.
+	 */
+	ldr	\tmp, =(SCR_EL3_RW_AARCH32 | SCR_EL3_HCE_EN |\
+			SCR_EL3_SMD_DIS | SCR_EL3_RES1 |\
+			SCR_EL3_NS_EN)
+	msr	scr_el3, \tmp
+
+	/* Return to AArch32 Hypervisor mode */
+	ldr     \tmp, =(SPSR_EL_END_LE | SPSR_EL_ASYN_MASK |\
+			SPSR_EL_IRQ_MASK | SPSR_EL_FIQ_MASK |\
+			SPSR_EL_T_A32 | SPSR_EL_M_AARCH32 |\
+			SPSR_EL_M_HYP)
+	msr	spsr_el3, \tmp
+	msr     elr_el3, \ep
 	eret
 .endm
 
-.macro armv8_switch_to_el1_m, xreg1, xreg2
+/*
+ * Switch from EL2 to EL1 for ARMv8
+ * @ep:     kernel entry point
+ * @flag:   The execution state flag for lower exception
+ *          level, ES_TO_AARCH64 or ES_TO_AARCH32
+ * @tmp:    temporary register
+ *
+ * For loading 32-bit OS, x1 is machine nr and x2 is ftaddr.
+ * For loading 64-bit OS, x0 is physical address to the FDT blob.
+ * They will be passed to the guest.
+ */
+.macro armv8_switch_to_el1_m, ep, flag, tmp
 	/* Initialize Generic Timers */
-	mrs	\xreg1, cnthctl_el2
-	orr	\xreg1, \xreg1, #0x3	/* Enable EL1 access to timers */
-	msr	cnthctl_el2, \xreg1
+	mrs	\tmp, cnthctl_el2
+	/* Enable EL1 access to timers */
+	orr	\tmp, \tmp, #(CNTHCTL_EL2_EL1PCEN_EN |\
+		CNTHCTL_EL2_EL1PCTEN_EN)
+	msr	cnthctl_el2, \tmp
 	msr	cntvoff_el2, xzr
 
 	/* Initilize MPID/MPIDR registers */
-	mrs	\xreg1, midr_el1
-	mrs	\xreg2, mpidr_el1
-	msr	vpidr_el2, \xreg1
-	msr	vmpidr_el2, \xreg2
+	mrs	\tmp, midr_el1
+	msr	vpidr_el2, \tmp
+	mrs	\tmp, mpidr_el1
+	msr	vmpidr_el2, \tmp
 
 	/* Disable coprocessor traps */
-	mov	\xreg1, #0x33ff
-	msr	cptr_el2, \xreg1	/* Disable coprocessor traps to EL2 */
+	mov	\tmp, #CPTR_EL2_RES1
+	msr	cptr_el2, \tmp		/* Disable coprocessor traps to EL2 */
 	msr	hstr_el2, xzr		/* Disable coprocessor traps to EL2 */
-	mov	\xreg1, #3 << 20
-	msr	cpacr_el1, \xreg1	/* Enable FP/SIMD at EL1 */
-
-	/* Initialize HCR_EL2 */
-	mov	\xreg1, #(1 << 31)		/* 64bit EL1 */
-	orr	\xreg1, \xreg1, #(1 << 29)	/* Disable HVC */
-	msr	hcr_el2, \xreg1
+	mov	\tmp, #CPACR_EL1_FPEN_EN
+	msr	cpacr_el1, \tmp		/* Enable FP/SIMD at EL1 */
 
 	/* SCTLR_EL1 initialization
 	 *
@@ -199,18 +257,50 @@ lr	.req	x30
 	 * UCI,EE,EOE,WXN,nTWE,nTWI,UCT,DZE,I,UMA,SED,ITD,
 	 * CP15BEN,SA0,SA,C,A,M to 0
 	 */
-	mov	\xreg1, #0x0800
-	movk	\xreg1, #0x30d0, lsl #16
-	msr	sctlr_el1, \xreg1
+	ldr	\tmp, =(SCTLR_EL1_RES1 | SCTLR_EL1_UCI_DIS |\
+			SCTLR_EL1_EE_LE | SCTLR_EL1_WXN_DIS |\
+			SCTLR_EL1_NTWE_DIS | SCTLR_EL1_NTWI_DIS |\
+			SCTLR_EL1_UCT_DIS | SCTLR_EL1_DZE_DIS |\
+			SCTLR_EL1_ICACHE_DIS | SCTLR_EL1_UMA_DIS |\
+			SCTLR_EL1_SED_EN | SCTLR_EL1_ITD_EN |\
+			SCTLR_EL1_CP15BEN_DIS | SCTLR_EL1_SA0_DIS |\
+			SCTLR_EL1_SA_DIS | SCTLR_EL1_DCACHE_DIS |\
+			SCTLR_EL1_ALIGN_DIS | SCTLR_EL1_MMU_DIS)
+	msr	sctlr_el1, \tmp
+
+	mov	\tmp, sp
+	msr	sp_el1, \tmp		/* Migrate SP */
+	mrs	\tmp, vbar_el2
+	msr	vbar_el1, \tmp		/* Migrate VBAR */
+
+	/* Check switch to AArch64 EL1 or AArch32 Supervisor mode */
+	cmp	\flag, #ES_TO_AARCH32
+	b.eq	1f
+
+	/* Initialize HCR_EL2 */
+	ldr	\tmp, =(HCR_EL2_RW_AARCH64 | HCR_EL2_HCD_DIS)
+	msr	hcr_el2, \tmp
 
 	/* Return to the EL1_SP1 mode from EL2 */
-	mov	\xreg1, sp
-	msr	sp_el1, \xreg1		/* Migrate SP */
-	mrs	\xreg1, vbar_el2
-	msr	vbar_el1, \xreg1	/* Migrate VBAR */
-	mov	\xreg1, #0x3c5
-	msr	spsr_el2, \xreg1	/* EL1_SP1 | D | A | I | F */
-	msr	elr_el2, lr
+	ldr	\tmp, =(SPSR_EL_DEBUG_MASK | SPSR_EL_SERR_MASK |\
+			SPSR_EL_IRQ_MASK | SPSR_EL_FIQ_MASK |\
+			SPSR_EL_M_AARCH64 | SPSR_EL_M_EL1H)
+	msr	spsr_el2, \tmp
+	msr     elr_el2, \ep
+	eret
+
+1:
+	/* Initialize HCR_EL2 */
+	ldr	\tmp, =(HCR_EL2_RW_AARCH32 | HCR_EL2_HCD_DIS)
+	msr	hcr_el2, \tmp
+
+	/* Return to AArch32 Supervisor mode from EL2 */
+	ldr	\tmp, =(SPSR_EL_END_LE | SPSR_EL_ASYN_MASK |\
+			SPSR_EL_IRQ_MASK | SPSR_EL_FIQ_MASK |\
+			SPSR_EL_T_A32 | SPSR_EL_M_AARCH32 |\
+			SPSR_EL_M_SVC)
+	msr     spsr_el2, \tmp
+	msr     elr_el2, \ep
 	eret
 .endm
 
diff --git a/arch/arm/include/asm/system.h b/arch/arm/include/asm/system.h
index 574a0e775f..01efc43657 100644
--- a/arch/arm/include/asm/system.h
+++ b/arch/arm/include/asm/system.h
@@ -18,6 +18,95 @@
 #define CR_WXN		(1 << 19)	/* Write Permision Imply XN	*/
 #define CR_EE		(1 << 25)	/* Exception (Big) Endian	*/
 
+#define ES_TO_AARCH64		1
+#define ES_TO_AARCH32		0
+
+/*
+ * SCR_EL3 bits definitions
+ */
+#define SCR_EL3_RW_AARCH64	(1 << 10) /* Next lower level is AArch64     */
+#define SCR_EL3_RW_AARCH32	(0 << 10) /* Lower lowers level are AArch32  */
+#define SCR_EL3_HCE_EN		(1 << 8)  /* Hypervisor Call enable          */
+#define SCR_EL3_SMD_DIS		(1 << 7)  /* Secure Monitor Call disable     */
+#define SCR_EL3_RES1		(3 << 4)  /* Reserved, RES1                  */
+#define SCR_EL3_NS_EN		(1 << 0)  /* EL0 and EL1 in Non-scure state  */
+
+/*
+ * SPSR_EL3/SPSR_EL2 bits definitions
+ */
+#define SPSR_EL_END_LE		(0 << 9)  /* Exception Little-endian          */
+#define SPSR_EL_DEBUG_MASK	(1 << 9)  /* Debug exception masked           */
+#define SPSR_EL_ASYN_MASK	(1 << 8)  /* Asynchronous data abort masked   */
+#define SPSR_EL_SERR_MASK	(1 << 8)  /* System Error exception masked    */
+#define SPSR_EL_IRQ_MASK	(1 << 7)  /* IRQ exception masked             */
+#define SPSR_EL_FIQ_MASK	(1 << 6)  /* FIQ exception masked             */
+#define SPSR_EL_T_A32		(0 << 5)  /* AArch32 instruction set A32      */
+#define SPSR_EL_M_AARCH64	(0 << 4)  /* Exception taken from AArch64     */
+#define SPSR_EL_M_AARCH32	(1 << 4)  /* Exception taken from AArch32     */
+#define SPSR_EL_M_SVC		(0x3)     /* Exception taken from SVC mode    */
+#define SPSR_EL_M_HYP		(0xa)     /* Exception taken from HYP mode    */
+#define SPSR_EL_M_EL1H		(5)       /* Exception taken from EL1h mode   */
+#define SPSR_EL_M_EL2H		(9)       /* Exception taken from EL2h mode   */
+
+/*
+ * CPTR_EL2 bits definitions
+ */
+#define CPTR_EL2_RES1		(3 << 12 | 0x3ff)           /* Reserved, RES1 */
+
+/*
+ * SCTLR_EL2 bits definitions
+ */
+#define SCTLR_EL2_RES1		(3 << 28 | 3 << 22 | 1 << 18 | 1 << 16 |\
+				 1 << 11 | 3 << 4)	    /* Reserved, RES1 */
+#define SCTLR_EL2_EE_LE		(0 << 25) /* Exception Little-endian          */
+#define SCTLR_EL2_WXN_DIS	(0 << 19) /* Write permission is not XN       */
+#define SCTLR_EL2_ICACHE_DIS	(0 << 12) /* Instruction cache disabled       */
+#define SCTLR_EL2_SA_DIS	(0 << 3)  /* Stack Alignment Check disabled   */
+#define SCTLR_EL2_DCACHE_DIS	(0 << 2)  /* Data cache disabled              */
+#define SCTLR_EL2_ALIGN_DIS	(0 << 1)  /* Alignment check disabled         */
+#define SCTLR_EL2_MMU_DIS	(0)       /* MMU disabled                     */
+
+/*
+ * CNTHCTL_EL2 bits definitions
+ */
+#define CNTHCTL_EL2_EL1PCEN_EN	(1 << 1)  /* Physical timer regs accessible   */
+#define CNTHCTL_EL2_EL1PCTEN_EN	(1 << 0)  /* Physical counter accessible      */
+
+/*
+ * HCR_EL2 bits definitions
+ */
+#define HCR_EL2_RW_AARCH64	(1 << 31) /* EL1 is AArch64                   */
+#define HCR_EL2_RW_AARCH32	(0 << 31) /* Lower levels are AArch32         */
+#define HCR_EL2_HCD_DIS		(1 << 29) /* Hypervisor Call disabled         */
+
+/*
+ * CPACR_EL1 bits definitions
+ */
+#define CPACR_EL1_FPEN_EN	(3 << 20) /* SIMD and FP instruction enabled  */
+
+/*
+ * SCTLR_EL1 bits definitions
+ */
+#define SCTLR_EL1_RES1		(3 << 28 | 3 << 22 | 1 << 20 |\
+				 1 << 11) /* Reserved, RES1                   */
+#define SCTLR_EL1_UCI_DIS	(0 << 26) /* Cache instruction disabled       */
+#define SCTLR_EL1_EE_LE		(0 << 25) /* Exception Little-endian          */
+#define SCTLR_EL1_WXN_DIS	(0 << 19) /* Write permission is not XN       */
+#define SCTLR_EL1_NTWE_DIS	(0 << 18) /* WFE instruction disabled         */
+#define SCTLR_EL1_NTWI_DIS	(0 << 16) /* WFI instruction disabled         */
+#define SCTLR_EL1_UCT_DIS	(0 << 15) /* CTR_EL0 access disabled          */
+#define SCTLR_EL1_DZE_DIS	(0 << 14) /* DC ZVA instruction disabled      */
+#define SCTLR_EL1_ICACHE_DIS	(0 << 12) /* Instruction cache disabled       */
+#define SCTLR_EL1_UMA_DIS	(0 << 9)  /* User Mask Access disabled        */
+#define SCTLR_EL1_SED_EN	(0 << 8)  /* SETEND instruction enabled       */
+#define SCTLR_EL1_ITD_EN	(0 << 7)  /* IT instruction enabled           */
+#define SCTLR_EL1_CP15BEN_DIS	(0 << 5)  /* CP15 barrier operation disabled  */
+#define SCTLR_EL1_SA0_DIS	(0 << 4)  /* Stack Alignment EL0 disabled     */
+#define SCTLR_EL1_SA_DIS	(0 << 3)  /* Stack Alignment EL1 disabled     */
+#define SCTLR_EL1_DCACHE_DIS	(0 << 2)  /* Data cache disabled              */
+#define SCTLR_EL1_ALIGN_DIS	(0 << 1)  /* Alignment check disabled         */
+#define SCTLR_EL1_MMU_DIS	(0)       /* MMU disabled                     */
+
 #ifndef __ASSEMBLY__
 
 u64 get_page_table_size(void);
@@ -98,8 +187,36 @@ int __asm_flush_l3_dcache(void);
 int __asm_invalidate_l3_icache(void);
 void __asm_switch_ttbr(u64 new_ttbr);
 
-void armv8_switch_to_el2(void);
-void armv8_switch_to_el1(void);
+/*
+ * Switch from EL3 to EL2 for ARMv8
+ *
+ * @args:        For loading 64-bit OS, fdt address.
+ *               For loading 32-bit OS, zero.
+ * @mach_nr:     For loading 64-bit OS, zero.
+ *               For loading 32-bit OS, machine nr
+ * @fdt_addr:    For loading 64-bit OS, zero.
+ *               For loading 32-bit OS, fdt address.
+ * @entry_point: kernel entry point
+ * @es_flag:     execution state flag, ES_TO_AARCH64 or ES_TO_AARCH32
+ */
+void armv8_switch_to_el2(u64 args, u64 mach_nr, u64 fdt_addr,
+			 u64 entry_point, u64 es_flag);
+/*
+ * Switch from EL2 to EL1 for ARMv8
+ *
+ * @args:        For loading 64-bit OS, fdt address.
+ *               For loading 32-bit OS, zero.
+ * @mach_nr:     For loading 64-bit OS, zero.
+ *               For loading 32-bit OS, machine nr
+ * @fdt_addr:    For loading 64-bit OS, zero.
+ *               For loading 32-bit OS, fdt address.
+ * @entry_point: kernel entry point
+ * @es_flag:     execution state flag, ES_TO_AARCH64 or ES_TO_AARCH32
+ */
+void armv8_switch_to_el1(u64 args, u64 mach_nr, u64 fdt_addr,
+			 u64 entry_point, u64 es_flag);
+void armv8_el2_to_aarch32(u64 args, u64 mach_nr, u64 fdt_addr,
+			  u64 entry_point);
 void gic_init(void);
 void gic_send_sgi(unsigned long sgino);
 void wait_for_wakeup(void);
diff --git a/arch/arm/include/asm/ti-common/sys_proto.h b/arch/arm/include/asm/ti-common/sys_proto.h
index 2bdb71cfe8..60d1160459 100644
--- a/arch/arm/include/asm/ti-common/sys_proto.h
+++ b/arch/arm/include/asm/ti-common/sys_proto.h
@@ -9,7 +9,7 @@
 
 DECLARE_GLOBAL_DATA_PTR;
 
-#ifdef CONFIG_OMAP_COMMON
+#ifdef CONFIG_ARCH_OMAP2
 #define TI_ARMV7_DRAM_ADDR_SPACE_START	0x80000000
 #define TI_ARMV7_DRAM_ADDR_SPACE_END	0xFFFFFFFF
 
diff --git a/arch/arm/include/asm/u-boot-arm.h b/arch/arm/include/asm/u-boot-arm.h
index 414042d403..305a302dfc 100644
--- a/arch/arm/include/asm/u-boot-arm.h
+++ b/arch/arm/include/asm/u-boot-arm.h
@@ -37,6 +37,7 @@ int	arch_early_init_r(void);
 /* board/.../... */
 int	board_init(void);
 void	dram_init_banksize (void);
+void	board_quiesce_devices(void);
 
 /* cpu/.../interrupt.c */
 int	arch_interrupt_init	(void);
diff --git a/arch/arm/lib/Makefile b/arch/arm/lib/Makefile
index caa62c6355..0051f76db0 100644
--- a/arch/arm/lib/Makefile
+++ b/arch/arm/lib/Makefile
@@ -92,3 +92,13 @@ AFLAGS_memset.o := -DMEMSET_NO_THUMB_BUILD
 AFLAGS_memcpy.o := -DMEMCPY_NO_THUMB_BUILD
 endif
 endif
+
+# For building EFI apps
+CFLAGS_$(EFI_CRT0) := $(CFLAGS_EFI)
+CFLAGS_REMOVE_$(EFI_CRT0) := $(CFLAGS_NON_EFI)
+
+CFLAGS_$(EFI_RELOC) := $(CFLAGS_EFI)
+CFLAGS_REMOVE_$(EFI_RELOC) := $(CFLAGS_NON_EFI)
+
+extra-$(CONFIG_CMD_BOOTEFI_HELLO_COMPILE) += $(EFI_CRT0) $(EFI_RELOC)
+extra-$(CONFIG_EFI) += $(EFI_CRT0) $(EFI_RELOC)
diff --git a/arch/arm/lib/bootm.c b/arch/arm/lib/bootm.c
index 53c3141322..35e6b06733 100644
--- a/arch/arm/lib/bootm.c
+++ b/arch/arm/lib/bootm.c
@@ -64,6 +64,10 @@ void arch_lmb_reserve(struct lmb *lmb)
 		    gd->bd->bi_dram[0].start + gd->bd->bi_dram[0].size - sp);
 }
 
+__weak void board_quiesce_devices(void)
+{
+}
+
 /**
  * announce_and_cleanup() - Print message and prepare for kernel boot
  *
@@ -84,6 +88,9 @@ static void announce_and_cleanup(int fake)
 #ifdef CONFIG_USB_DEVICE
 	udc_disconnect();
 #endif
+
+	board_quiesce_devices();
+
 	cleanup_before_linux();
 }
 
@@ -193,10 +200,6 @@ static void do_nonsec_virt_switch(void)
 {
 	smp_kick_all_cpus();
 	dcache_disable();	/* flush cache before swtiching to EL2 */
-	armv8_switch_to_el2();
-#ifdef CONFIG_ARMV8_SWITCH_TO_EL1
-	armv8_switch_to_el1();
-#endif
 }
 #endif
 
@@ -273,6 +276,28 @@ bool armv7_boot_nonsec(void)
 }
 #endif
 
+#ifdef CONFIG_ARM64
+__weak void update_os_arch_secondary_cores(uint8_t os_arch)
+{
+}
+
+#ifdef CONFIG_ARMV8_SWITCH_TO_EL1
+static void switch_to_el1(void)
+{
+	if ((IH_ARCH_DEFAULT == IH_ARCH_ARM64) &&
+	    (images.os.arch == IH_ARCH_ARM))
+		armv8_switch_to_el1(0, (u64)gd->bd->bi_arch_number,
+				    (u64)images.ft_addr,
+				    (u64)images.ep,
+				    ES_TO_AARCH32);
+	else
+		armv8_switch_to_el1((u64)images.ft_addr, 0, 0,
+				    images.ep,
+				    ES_TO_AARCH64);
+}
+#endif
+#endif
+
 /* Subcommand: GO */
 static void boot_jump_linux(bootm_headers_t *images, int flag)
 {
@@ -292,7 +317,24 @@ static void boot_jump_linux(bootm_headers_t *images, int flag)
 
 	if (!fake) {
 		do_nonsec_virt_switch();
-		kernel_entry(images->ft_addr, NULL, NULL, NULL);
+
+		update_os_arch_secondary_cores(images->os.arch);
+
+#ifdef CONFIG_ARMV8_SWITCH_TO_EL1
+		armv8_switch_to_el2((u64)images->ft_addr, 0, 0,
+				    (u64)switch_to_el1, ES_TO_AARCH64);
+#else
+		if ((IH_ARCH_DEFAULT == IH_ARCH_ARM64) &&
+		    (images->os.arch == IH_ARCH_ARM))
+			armv8_switch_to_el2(0, (u64)gd->bd->bi_arch_number,
+					    (u64)images->ft_addr,
+					    (u64)images->ep,
+					    ES_TO_AARCH32);
+		else
+			armv8_switch_to_el2((u64)images->ft_addr, 0, 0,
+					    images->ep,
+					    ES_TO_AARCH64);
+#endif
 	}
 #else
 	unsigned long machid = gd->bd->bi_arch_number;
diff --git a/arch/arm/lib/crt0_aarch64_efi.S b/arch/arm/lib/crt0_aarch64_efi.S
new file mode 100644
index 0000000000..52056469be
--- /dev/null
+++ b/arch/arm/lib/crt0_aarch64_efi.S
@@ -0,0 +1,135 @@
+/*
+ * crt0-efi-aarch64.S - PE/COFF header for aarch64 EFI applications
+ *
+ * Copright (C) 2014 Linaro Ltd. <ard.biesheuvel@linaro.org>
+ *
+ * SPDX-License-Identifier:     GPL-2.0+     BSD-2-Clause
+ *
+ * This file is taken and modified from the gnu-efi project.
+ */
+
+	.section	.text.head
+
+	/*
+	 * Magic "MZ" signature for PE/COFF
+	 */
+	.globl	ImageBase
+ImageBase:
+	.ascii	"MZ"
+	.skip	58				/* 'MZ' + pad + offset == 64 */
+	.long	pe_header - ImageBase		/* Offset to the PE header */
+pe_header:
+	.ascii	"PE"
+	.short	0
+coff_header:
+	.short	0xaa64				/* AArch64 */
+	.short	2				/* nr_sections */
+	.long	0				/* TimeDateStamp */
+	.long	0				/* PointerToSymbolTable */
+	.long	1				/* NumberOfSymbols */
+	.short	section_table - optional_header	/* SizeOfOptionalHeader */
+	/*
+	 * Characteristics: IMAGE_FILE_DEBUG_STRIPPED |
+	 * IMAGE_FILE_EXECUTABLE_IMAGE | IMAGE_FILE_LINE_NUMS_STRIPPED
+	 */
+	.short	0x206
+optional_header:
+	.short	0x20b				/* PE32+ format */
+	.byte	0x02				/* MajorLinkerVersion */
+	.byte	0x14				/* MinorLinkerVersion */
+	.long	_edata - _start			/* SizeOfCode */
+	.long	0				/* SizeOfInitializedData */
+	.long	0				/* SizeOfUninitializedData */
+	.long	_start - ImageBase		/* AddressOfEntryPoint */
+	.long	_start - ImageBase		/* BaseOfCode */
+
+extra_header_fields:
+	.quad	0				/* ImageBase */
+	.long	0x20				/* SectionAlignment */
+	.long	0x8				/* FileAlignment */
+	.short	0				/* MajorOperatingSystemVersion */
+	.short	0				/* MinorOperatingSystemVersion */
+	.short	0				/* MajorImageVersion */
+	.short	0				/* MinorImageVersion */
+	.short	0				/* MajorSubsystemVersion */
+	.short	0				/* MinorSubsystemVersion */
+	.long	0				/* Win32VersionValue */
+
+	.long	_edata - ImageBase		/* SizeOfImage */
+
+	/*
+	 * Everything before the kernel image is considered part of the header
+	 */
+	.long	_start - ImageBase		/* SizeOfHeaders */
+	.long	0				/* CheckSum */
+	.short	EFI_SUBSYSTEM			/* Subsystem */
+	.short	0				/* DllCharacteristics */
+	.quad	0				/* SizeOfStackReserve */
+	.quad	0				/* SizeOfStackCommit */
+	.quad	0				/* SizeOfHeapReserve */
+	.quad	0				/* SizeOfHeapCommit */
+	.long	0				/* LoaderFlags */
+	.long	0x6				/* NumberOfRvaAndSizes */
+
+	.quad	0				/* ExportTable */
+	.quad	0				/* ImportTable */
+	.quad	0				/* ResourceTable */
+	.quad	0				/* ExceptionTable */
+	.quad	0				/* CertificationTable */
+	.quad	0				/* BaseRelocationTable */
+
+	/* Section table */
+section_table:
+
+	/*
+	 * The EFI application loader requires a relocation section
+	 * because EFI applications must be relocatable.  This is a
+	 * dummy section as far as we are concerned.
+	 */
+	.ascii	".reloc"
+	.byte	0
+	.byte	0			/* end of 0 padding of section name */
+	.long	0
+	.long	0
+	.long	0			/* SizeOfRawData */
+	.long	0			/* PointerToRawData */
+	.long	0			/* PointerToRelocations */
+	.long	0			/* PointerToLineNumbers */
+	.short	0			/* NumberOfRelocations */
+	.short	0			/* NumberOfLineNumbers */
+	.long	0x42100040		/* Characteristics (section flags) */
+
+
+	.ascii	".text"
+	.byte	0
+	.byte	0
+	.byte	0			/* end of 0 padding of section name */
+	.long	_edata - _start		/* VirtualSize */
+	.long	_start - ImageBase	/* VirtualAddress */
+	.long	_edata - _start		/* SizeOfRawData */
+	.long	_start - ImageBase	/* PointerToRawData */
+
+	.long	0		/* PointerToRelocations (0 for executables) */
+	.long	0		/* PointerToLineNumbers (0 for executables) */
+	.short	0		/* NumberOfRelocations  (0 for executables) */
+	.short	0		/* NumberOfLineNumbers  (0 for executables) */
+	.long	0xe0500020	/* Characteristics (section flags) */
+
+_start:
+	stp		x29, x30, [sp, #-32]!
+	mov		x29, sp
+
+	stp		x0, x1, [sp, #16]
+	mov		x2, x0
+	mov		x3, x1
+	adr		x0, ImageBase
+	adrp		x1, _DYNAMIC
+	add		x1, x1, #:lo12:_DYNAMIC
+	bl		_relocate
+	cbnz		x0, 0f
+
+	ldp		x0, x1, [sp, #16]
+	bl		efi_main
+
+0:	ldp		x29, x30, [sp], #32
+	ret
diff --git a/arch/arm/lib/crt0_arm_efi.S b/arch/arm/lib/crt0_arm_efi.S
new file mode 100644
index 0000000000..967c885982
--- /dev/null
+++ b/arch/arm/lib/crt0_arm_efi.S
@@ -0,0 +1,138 @@
+/*
+ * crt0-efi-arm.S - PE/COFF header for ARM EFI applications
+ *
+ * Copright (C) 2014 Linaro Ltd. <ard.biesheuvel@linaro.org>
+ *
+ * SPDX-License-Identifier:     GPL-2.0+     BSD-2-Clause
+ *
+ * This file is taken and modified from the gnu-efi project.
+ */
+
+	.section	.text.head
+
+	/*
+	 * Magic "MZ" signature for PE/COFF
+	 */
+	.globl	image_base
+image_base:
+	.ascii	"MZ"
+	.skip	58				/* 'MZ' + pad + offset == 64 */
+	.long	pe_header - image_base		/* Offset to the PE header */
+pe_header:
+	.ascii	"PE"
+	.short	0
+coff_header:
+	.short	0x1c2				/* Mixed ARM/Thumb */
+	.short	2				/* nr_sections */
+	.long	0				/* TimeDateStamp */
+	.long	0				/* PointerToSymbolTable */
+	.long	1				/* NumberOfSymbols */
+	.short	section_table - optional_header	/* SizeOfOptionalHeader */
+	/*
+	 * Characteristics: IMAGE_FILE_32BIT_MACHINE |
+	 * IMAGE_FILE_DEBUG_STRIPPED | IMAGE_FILE_EXECUTABLE_IMAGE |
+	 * IMAGE_FILE_LINE_NUMS_STRIPPED
+	 */
+	.short	0x306
+optional_header:
+	.short	0x10b				/* PE32+ format */
+	.byte	0x02				/* MajorLinkerVersion */
+	.byte	0x14				/* MinorLinkerVersion */
+	.long	_edata - _start			/* SizeOfCode */
+	.long	0				/* SizeOfInitializedData */
+	.long	0				/* SizeOfUninitializedData */
+	.long	_start - image_base		/* AddressOfEntryPoint */
+	.long	_start - image_base		/* BaseOfCode */
+	.long	0				/* BaseOfData */
+
+extra_header_fields:
+	.long	0				/* image_base */
+	.long	0x20				/* SectionAlignment */
+	.long	0x8				/* FileAlignment */
+	.short	0				/* MajorOperatingSystemVersion */
+	.short	0				/* MinorOperatingSystemVersion */
+	.short	0				/* MajorImageVersion */
+	.short	0				/* MinorImageVersion */
+	.short	0				/* MajorSubsystemVersion */
+	.short	0				/* MinorSubsystemVersion */
+	.long	0				/* Win32VersionValue */
+
+	.long	_edata - image_base		/* SizeOfImage */
+
+	/*
+	 * Everything before the kernel image is considered part of the header
+	 */
+	.long	_start - image_base		/* SizeOfHeaders */
+	.long	0				/* CheckSum */
+	.short	EFI_SUBSYSTEM			/* Subsystem */
+	.short	0				/* DllCharacteristics */
+	.long	0				/* SizeOfStackReserve */
+	.long	0				/* SizeOfStackCommit */
+	.long	0				/* SizeOfHeapReserve */
+	.long	0				/* SizeOfHeapCommit */
+	.long	0				/* LoaderFlags */
+	.long	0x6				/* NumberOfRvaAndSizes */
+
+	.quad	0				/* ExportTable */
+	.quad	0				/* ImportTable */
+	.quad	0				/* ResourceTable */
+	.quad	0				/* ExceptionTable */
+	.quad	0				/* CertificationTable */
+	.quad	0				/* BaseRelocationTable */
+
+section_table:
+
+	/*
+	 * The EFI application loader requires a relocation section
+	 * because EFI applications must be relocatable.  This is a
+	 * dummy section as far as we are concerned.
+	 */
+	.ascii	".reloc"
+	.byte	0
+	.byte	0			/* end of 0 padding of section name */
+	.long	0
+	.long	0
+	.long	0			/* SizeOfRawData */
+	.long	0			/* PointerToRawData */
+	.long	0			/* PointerToRelocations */
+	.long	0			/* PointerToLineNumbers */
+	.short	0			/* NumberOfRelocations */
+	.short	0			/* NumberOfLineNumbers */
+	.long	0x42100040		/* Characteristics (section flags) */
+
+	.ascii	".text"
+	.byte	0
+	.byte	0
+	.byte	0			/* end of 0 padding of section name */
+	.long	_edata - _start		/* VirtualSize */
+	.long	_start - image_base	/* VirtualAddress */
+	.long	_edata - _start		/* SizeOfRawData */
+	.long	_start - image_base	/* PointerToRawData */
+
+	.long	0		/* PointerToRelocations (0 for executables) */
+	.long	0		/* PointerToLineNumbers (0 for executables) */
+	.short	0		/* NumberOfRelocations  (0 for executables) */
+	.short	0		/* NumberOfLineNumbers  (0 for executables) */
+	.long	0xe0500020	/* Characteristics (section flags) */
+
+_start:
+	stmfd		sp!, {r0-r2, lr}
+
+	mov		r2, r0
+	mov		r3, r1
+	adr		r1, .L_DYNAMIC
+	ldr		r0, [r1]
+	add		r1, r0, r1
+	adr		r0, image_base
+	bl		_relocate
+	teq		r0, #0
+	bne		0f
+
+	ldmfd		sp, {r0-r1}
+	bl		efi_main
+
+0:	add		sp, sp, #12
+	ldr		pc, [sp], #4
+
+.L_DYNAMIC:
+	.word		_DYNAMIC - .
diff --git a/arch/arm/lib/elf_aarch64_efi.lds b/arch/arm/lib/elf_aarch64_efi.lds
new file mode 100644
index 0000000000..47cce1db97
--- /dev/null
+++ b/arch/arm/lib/elf_aarch64_efi.lds
@@ -0,0 +1,70 @@
+/*
+ * U-Boot aarch64 EFI linker script
+ *
+ * SPDX-License-Identifier:	BSD-2-Clause
+ *
+ * Modified from elf_aarch64_efi.lds in gnu-efi
+ */
+
+OUTPUT_FORMAT("elf64-littleaarch64", "elf64-littleaarch64", "elf64-littleaarch64")
+OUTPUT_ARCH(aarch64)
+ENTRY(_start)
+SECTIONS
+{
+	.text 0x0 : {
+		_text = .;
+		*(.text.head)
+		*(.text)
+		*(.text.*)
+		*(.gnu.linkonce.t.*)
+		*(.srodata)
+		*(.rodata*)
+		. = ALIGN(16);
+	}
+	_etext = .;
+	_text_size = . - _text;
+	.dynamic  : { *(.dynamic) }
+	.data : {
+		_data = .;
+		*(.sdata)
+		*(.data)
+		*(.data1)
+		*(.data.*)
+		*(.got.plt)
+		*(.got)
+
+		/*
+		 * The EFI loader doesn't seem to like a .bss section, so we
+		 * stick it all into .data:
+		 */
+		. = ALIGN(16);
+		_bss = .;
+		*(.sbss)
+		*(.scommon)
+		*(.dynbss)
+		*(.bss)
+		*(.bss.*)
+		*(COMMON)
+		. = ALIGN(16);
+		_bss_end = .;
+		_edata = .;
+	}
+	.rela.dyn : { *(.rela.dyn) }
+	.rela.plt : { *(.rela.plt) }
+	.rela.got : { *(.rela.got) }
+	.rela.data : { *(.rela.data) *(.rela.data*) }
+	_data_size = . - _etext;
+
+	. = ALIGN(4096);
+	.dynsym   : { *(.dynsym) }
+	. = ALIGN(4096);
+	.dynstr   : { *(.dynstr) }
+	. = ALIGN(4096);
+	.note.gnu.build-id : { *(.note.gnu.build-id) }
+	/DISCARD/ : {
+		*(.rel.reloc)
+		*(.eh_frame)
+		*(.note.GNU-stack)
+	}
+	.comment 0 : { *(.comment) }
+}
diff --git a/arch/arm/lib/elf_arm_efi.lds b/arch/arm/lib/elf_arm_efi.lds
new file mode 100644
index 0000000000..59f66a1d4a
--- /dev/null
+++ b/arch/arm/lib/elf_arm_efi.lds
@@ -0,0 +1,70 @@
+/*
+ * U-Boot ARM EFI linker script
+ *
+ * SPDX-License-Identifier:	BSD-2-Clause
+ *
+ * Modified from elf_arm_efi.lds in gnu-efi
+ */
+
+OUTPUT_FORMAT("elf32-littlearm", "elf32-littlearm", "elf32-littlearm")
+OUTPUT_ARCH(arm)
+ENTRY(_start)
+SECTIONS
+{
+	.text 0x0 : {
+		_text = .;
+		*(.text.head)
+		*(.text)
+		*(.text.*)
+		*(.gnu.linkonce.t.*)
+		*(.srodata)
+		*(.rodata*)
+		. = ALIGN(16);
+	}
+	_etext = .;
+	_text_size = . - _text;
+	.dynamic  : { *(.dynamic) }
+	.data : {
+		_data = .;
+		*(.sdata)
+		*(.data)
+		*(.data1)
+		*(.data.*)
+		*(.got.plt)
+		*(.got)
+
+		/*
+		 * The EFI loader doesn't seem to like a .bss section, so we
+		 * stick it all into .data:
+		 */
+		. = ALIGN(16);
+		_bss = .;
+		*(.sbss)
+		*(.scommon)
+		*(.dynbss)
+		*(.bss)
+		*(.bss.*)
+		*(COMMON)
+		. = ALIGN(16);
+		_bss_end = .;
+		_edata = .;
+	}
+	.rel.dyn : { *(.rel.dyn) }
+	.rel.plt : { *(.rel.plt) }
+	.rel.got : { *(.rel.got) }
+	.rel.data : { *(.rel.data) *(.rel.data*) }
+	_data_size = . - _etext;
+
+	. = ALIGN(4096);
+	.dynsym   : { *(.dynsym) }
+	. = ALIGN(4096);
+	.dynstr   : { *(.dynstr) }
+	. = ALIGN(4096);
+	.note.gnu.build-id : { *(.note.gnu.build-id) }
+	/DISCARD/ : {
+		*(.rel.reloc)
+		*(.eh_frame)
+		*(.note.GNU-stack)
+	}
+	.comment 0 : { *(.comment) }
+}
diff --git a/arch/arm/lib/reloc_aarch64_efi.c b/arch/arm/lib/reloc_aarch64_efi.c
new file mode 100644
index 0000000000..38c13d3689
--- /dev/null
+++ b/arch/arm/lib/reloc_aarch64_efi.c
@@ -0,0 +1,87 @@
+/* reloc_aarch64.c - position independent x86 ELF shared object relocator
+   Copyright (C) 2014 Linaro Ltd. <ard.biesheuvel@linaro.org>
+   Copyright (C) 1999 Hewlett-Packard Co.
+	Contributed by David Mosberger <davidm@hpl.hp.com>.
+
+    All rights reserved.
+
+    Redistribution and use in source and binary forms, with or without
+    modification, are permitted provided that the following conditions
+    are met:
+
+    * Redistributions of source code must retain the above copyright
+      notice, this list of conditions and the following disclaimer.
+    * Redistributions in binary form must reproduce the above
+      copyright notice, this list of conditions and the following
+      disclaimer in the documentation and/or other materials
+      provided with the distribution.
+    * Neither the name of Hewlett-Packard Co. nor the names of its
+      contributors may be used to endorse or promote products derived
+      from this software without specific prior written permission.
+
+    THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND
+    CONTRIBUTORS "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES,
+    INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+    MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+    DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS
+    BE LIABLE FOR ANYDIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY,
+    OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
+    PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR
+    PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+    THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR
+    TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF
+    THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
+    SUCH DAMAGE.
+*/
+
+#include <efi.h>
+
+#include <elf.h>
+
+efi_status_t _relocate(long ldbase, Elf64_Dyn *dyn, efi_handle_t image,
+		       struct efi_system_table *systab)
+{
+	long relsz = 0, relent = 0;
+	Elf64_Rela *rel = 0;
+	unsigned long *addr;
+	int i;
+
+	for (i = 0; dyn[i].d_tag != DT_NULL; ++i) {
+		switch (dyn[i].d_tag) {
+		case DT_RELA:
+			rel = (Elf64_Rela *)((ulong)dyn[i].d_un.d_ptr + ldbase);
+			break;
+		case DT_RELASZ:
+			relsz = dyn[i].d_un.d_val;
+			break;
+		case DT_RELAENT:
+			relent = dyn[i].d_un.d_val;
+			break;
+		default:
+			break;
+		}
+	}
+
+	if (!rel && relent == 0)
+		return EFI_SUCCESS;
+
+	if (!rel || relent == 0)
+		return EFI_LOAD_ERROR;
+
+	while (relsz > 0) {
+		/* apply the relocs */
+		switch (ELF64_R_TYPE(rel->r_info)) {
+		case R_AARCH64_NONE:
+			break;
+		case R_AARCH64_RELATIVE:
+			addr = (ulong *)(ldbase + rel->r_offset);
+			*addr = ldbase + rel->r_addend;
+			break;
+		default:
+			break;
+		}
+		rel = (Elf64_Rela *)((char *)rel + relent);
+		relsz -= relent;
+	}
+	return EFI_SUCCESS;
+}
diff --git a/arch/arm/lib/reloc_arm_efi.c b/arch/arm/lib/reloc_arm_efi.c
new file mode 100644
index 0000000000..d2f96eeb98
--- /dev/null
+++ b/arch/arm/lib/reloc_arm_efi.c
@@ -0,0 +1,66 @@
+/*
+ * reloc_arm.c - position-independent ARM ELF shared object relocator
+ *
+ * Copyright (C) 2014 Linaro Ltd. <ard.biesheuvel@linaro.org>
+ * Copyright (C) 1999 Hewlett-Packard Co.
+ * Contributed by David Mosberger <davidm@hpl.hp.com>.
+ *
+ * All rights reserved.
+ *
+ * SPDX-License-Identifier:	BSD-3-Clause
+ *
+ * This file is taken and modified from the gnu-efi project.
+ */
+
+#include <efi.h>
+#include <elf.h>
+
+efi_status_t _relocate(long ldbase, Elf32_Dyn *dyn, efi_handle_t image,
+		       struct efi_system_table *systab)
+{
+	long relsz = 0, relent = 0;
+	Elf32_Rel *rel = 0;
+	ulong *addr;
+	int i;
+
+	for (i = 0; dyn[i].d_tag != DT_NULL; ++i) {
+		switch (dyn[i].d_tag) {
+		case DT_REL:
+			rel = (Elf32_Rel *)((ulong)dyn[i].d_un.d_ptr
+					+ ldbase);
+			break;
+		case DT_RELSZ:
+			relsz = dyn[i].d_un.d_val;
+			break;
+		case DT_RELENT:
+			relent = dyn[i].d_un.d_val;
+			break;
+		default:
+			break;
+		}
+	}
+
+	if (!rel && relent == 0)
+		return EFI_SUCCESS;
+
+	if (!rel || relent == 0)
+		return EFI_LOAD_ERROR;
+
+	while (relsz > 0) {
+		/* apply the relocs */
+		switch (ELF32_R_TYPE(rel->r_info)) {
+		case R_ARM_NONE:
+			break;
+		case R_ARM_RELATIVE:
+			addr = (ulong *)(ldbase + rel->r_offset);
+			*addr += ldbase;
+			break;
+		default:
+			break;
+		}
+		rel = (Elf32_Rel *)((char *)rel + relent);
+		relsz -= relent;
+	}
+
+	return EFI_SUCCESS;
+}
diff --git a/arch/arm/lib/relocate.S b/arch/arm/lib/relocate.S
index 475d503dd9..a6fb07c401 100644
--- a/arch/arm/lib/relocate.S
+++ b/arch/arm/lib/relocate.S
@@ -8,6 +8,7 @@
 
 #include <asm-offsets.h>
 #include <config.h>
+#include <elf.h>
 #include <linux/linkage.h>
 #ifdef CONFIG_CPU_V7M
 #include <asm/armv7m.h>
@@ -96,7 +97,7 @@ copy_loop:
 fixloop:
 	ldmia	r2!, {r0-r1}		/* (r0,r1) <- (SRC location,fixup) */
 	and	r1, r1, #0xff
-	cmp	r1, #23			/* relative fixup? */
+	cmp	r1, #R_ARM_RELATIVE
 	bne	fixnext
 
 	/* relative fix: increase location by offset */
diff --git a/arch/arm/lib/relocate_64.S b/arch/arm/lib/relocate_64.S
index 5c51cae8ab..242e56e960 100644
--- a/arch/arm/lib/relocate_64.S
+++ b/arch/arm/lib/relocate_64.S
@@ -10,6 +10,7 @@
 
 #include <asm-offsets.h>
 #include <config.h>
+#include <elf.h>
 #include <linux/linkage.h>
 #include <asm/macro.h>
 
@@ -47,7 +48,7 @@ fixloop:
 	ldp	x0, x1, [x2], #16	/* (x0,x1) <- (SRC location, fixup) */
 	ldr	x4, [x2], #8		/* x4 <- addend */
 	and	x1, x1, #0xffffffff
-	cmp	x1, #1027		/* relative fixup? */
+	cmp	x1, #R_AARCH64_RELATIVE
 	bne	fixnext
 
 	/* relative fix: store addend plus offset at dest location */
diff --git a/arch/arm/mach-exynos/Kconfig b/arch/arm/mach-exynos/Kconfig
index ce2a16f95b..07118fc3df 100644
--- a/arch/arm/mach-exynos/Kconfig
+++ b/arch/arm/mach-exynos/Kconfig
@@ -126,6 +126,7 @@ choice
 config  TARGET_ESPRESSO7420
 	bool "ESPRESSO7420 board"
 	select ARM64
+	select ARMV8_MULTIENTRY
 	select SUPPORT_SPL
 	select OF_CONTROL
 	select SPL_DISABLE_OF_CONTROL
diff --git a/arch/arm/mach-exynos/soc.c b/arch/arm/mach-exynos/soc.c
index f9c7468611..cf149ad1a8 100644
--- a/arch/arm/mach-exynos/soc.c
+++ b/arch/arm/mach-exynos/soc.c
@@ -9,6 +9,16 @@
 #include <asm/io.h>
 #include <asm/system.h>
 
+#ifdef CONFIG_TARGET_ESPRESSO7420
+/*
+ * Exynos7420 uses CPU0 of Cluster-1 as boot CPU. Due to this, branch_if_master
+ * fails to identify as the boot CPU as the master CPU. As temporary workaround,
+ * setup the slave CPU boot address as "_main".
+ */
+extern void _main(void);
+void *secondary_boot_addr = (void *)_main;
+#endif /* CONFIG_TARGET_ESPRESSO7420 */
+
 void reset_cpu(ulong addr)
 {
 #ifdef CONFIG_CPU_V7
@@ -23,11 +33,3 @@ void enable_caches(void)
 	dcache_enable();
 }
 #endif
-
-#ifdef CONFIG_ARM64
-void lowlevel_init(void)
-{
-	armv8_switch_to_el2();
-	armv8_switch_to_el1();
-}
-#endif
diff --git a/arch/arm/mach-keystone/Makefile b/arch/arm/mach-keystone/Makefile
index b2ffe5bc2f..8253a3bcc1 100644
--- a/arch/arm/mach-keystone/Makefile
+++ b/arch/arm/mach-keystone/Makefile
@@ -18,5 +18,5 @@ endif
 obj-y	+= msmc.o
 obj-y	+= ddr3.o
 obj-y	+= keystone.o
-obj-$(CONFIG_K2E_EVM) += ddr3_spd.o
-obj-$(CONFIG_K2HK_EVM) += ddr3_spd.o
+obj-$(CONFIG_TARGET_K2E_EVM) += ddr3_spd.o
+obj-$(CONFIG_TARGET_K2HK_EVM) += ddr3_spd.o
diff --git a/arch/arm/cpu/armv7/omap-common/Kconfig b/arch/arm/mach-omap2/Kconfig
index 4daccd93ff..24bc485195 100644
--- a/arch/arm/cpu/armv7/omap-common/Kconfig
+++ b/arch/arm/mach-omap2/Kconfig
@@ -8,10 +8,10 @@ config TI_SECURE_DEVICE
 	  authenticated) and the code. See the doc/README.ti-secure
 	  file for further details.
 
-source "arch/arm/cpu/armv7/omap3/Kconfig"
+source "arch/arm/mach-omap2/omap3/Kconfig"
 
-source "arch/arm/cpu/armv7/omap4/Kconfig"
+source "arch/arm/mach-omap2/omap4/Kconfig"
 
-source "arch/arm/cpu/armv7/omap5/Kconfig"
+source "arch/arm/mach-omap2/omap5/Kconfig"
 
-source "arch/arm/cpu/armv7/am33xx/Kconfig"
+source "arch/arm/mach-omap2/am33xx/Kconfig"
diff --git a/arch/arm/cpu/armv7/omap-common/Makefile b/arch/arm/mach-omap2/Makefile
index 3172bae105..e814eb008e 100644
--- a/arch/arm/cpu/armv7/omap-common/Makefile
+++ b/arch/arm/mach-omap2/Makefile
@@ -5,7 +5,12 @@
 # SPDX-License-Identifier:	GPL-2.0+
 #
 
-obj-y	:= reset.o
+obj-$(if $(filter am33xx,$(SOC)),y) += am33xx/
+obj-$(CONFIG_OMAP34XX) += omap3/
+obj-$(CONFIG_OMAP44XX) += omap4/
+obj-$(CONFIG_OMAP54XX) += omap5/
+
+obj-y	+= reset.o
 ifeq ($(CONFIG_TIMER),)
 obj-y	+= timer.o
 else
diff --git a/arch/arm/cpu/armv7/omap-common/abb.c b/arch/arm/mach-omap2/abb.c
index a0add6643e..a0add6643e 100644
--- a/arch/arm/cpu/armv7/omap-common/abb.c
+++ b/arch/arm/mach-omap2/abb.c
diff --git a/arch/arm/cpu/armv7/am33xx/Kconfig b/arch/arm/mach-omap2/am33xx/Kconfig
index 8fd32c2a46..8fd32c2a46 100644
--- a/arch/arm/cpu/armv7/am33xx/Kconfig
+++ b/arch/arm/mach-omap2/am33xx/Kconfig
diff --git a/arch/arm/cpu/armv7/am33xx/Makefile b/arch/arm/mach-omap2/am33xx/Makefile
index 6fda4825fc..6fda4825fc 100644
--- a/arch/arm/cpu/armv7/am33xx/Makefile
+++ b/arch/arm/mach-omap2/am33xx/Makefile
diff --git a/arch/arm/cpu/armv7/am33xx/board.c b/arch/arm/mach-omap2/am33xx/board.c
index 68badedd14..5ebeac0ee1 100644
--- a/arch/arm/cpu/armv7/am33xx/board.c
+++ b/arch/arm/mach-omap2/am33xx/board.c
@@ -270,15 +270,11 @@ static void watchdog_disable(void)
 		;
 }
 
-#ifdef CONFIG_SPL_BUILD
-void board_init_f(ulong dummy)
+void s_init(void)
 {
-	board_early_init_f();
-	sdram_init();
 }
-#endif
 
-void s_init(void)
+void early_system_init(void)
 {
 	/*
 	 * The ROM will only have set up sufficient pinmux to allow for the
@@ -290,11 +286,32 @@ void s_init(void)
 #endif
 	watchdog_disable();
 	set_uart_mux_conf();
-	setup_clocks_for_console();
+	setup_early_clocks();
 	uart_soft_reset();
+#ifdef CONFIG_TI_I2C_BOARD_DETECT
+	do_board_detect();
+#endif
 #if defined(CONFIG_SPL_AM33XX_ENABLE_RTC32K_OSC)
 	/* Enable RTC32K clock */
 	rtc32k_enable();
 #endif
 }
+
+#ifdef CONFIG_SPL_BUILD
+void board_init_f(ulong dummy)
+{
+	early_system_init();
+	board_early_init_f();
+	sdram_init();
+}
 #endif
+
+#endif
+
+int arch_cpu_init_dm(void)
+{
+#ifndef CONFIG_SKIP_LOWLEVEL_INIT
+	early_system_init();
+#endif
+	return 0;
+}
diff --git a/arch/arm/cpu/armv7/am33xx/clk_synthesizer.c b/arch/arm/mach-omap2/am33xx/clk_synthesizer.c
index 316e677c65..316e677c65 100644
--- a/arch/arm/cpu/armv7/am33xx/clk_synthesizer.c
+++ b/arch/arm/mach-omap2/am33xx/clk_synthesizer.c
diff --git a/arch/arm/cpu/armv7/am33xx/clock.c b/arch/arm/mach-omap2/am33xx/clock.c
index 9b9b78eddd..3d17698e18 100644
--- a/arch/arm/cpu/armv7/am33xx/clock.c
+++ b/arch/arm/mach-omap2/am33xx/clock.c
@@ -232,10 +232,15 @@ __weak void scale_vcores(void)
 {
 }
 
-void prcm_init()
+void setup_early_clocks(void)
 {
+	setup_clocks_for_console();
 	enable_basic_clocks();
+	timer_init();
+}
+
+void prcm_init(void)
+{
 	scale_vcores();
 	setup_dplls();
-	timer_init();
 }
diff --git a/arch/arm/cpu/armv7/am33xx/clock_am33xx.c b/arch/arm/mach-omap2/am33xx/clock_am33xx.c
index 7b841b2d55..7b841b2d55 100644
--- a/arch/arm/cpu/armv7/am33xx/clock_am33xx.c
+++ b/arch/arm/mach-omap2/am33xx/clock_am33xx.c
diff --git a/arch/arm/cpu/armv7/am33xx/clock_am43xx.c b/arch/arm/mach-omap2/am33xx/clock_am43xx.c
index 73ea955a6c..73ea955a6c 100644
--- a/arch/arm/cpu/armv7/am33xx/clock_am43xx.c
+++ b/arch/arm/mach-omap2/am33xx/clock_am43xx.c
diff --git a/arch/arm/cpu/armv7/am33xx/clock_ti814x.c b/arch/arm/mach-omap2/am33xx/clock_ti814x.c
index 9b5a47b018..50bd631cf6 100644
--- a/arch/arm/cpu/armv7/am33xx/clock_ti814x.c
+++ b/arch/arm/mach-omap2/am33xx/clock_ti814x.c
@@ -386,6 +386,12 @@ void setup_clocks_for_console(void)
 	while (readl(&cmalwon->uart0clkctrl) != PRCM_MOD_EN)
 		;
 }
+
+void setup_early_clocks(void)
+{
+	setup_clocks_for_console();
+}
+
 /*
  * Configure the PLL/PRCM for necessary peripherals
  */
diff --git a/arch/arm/cpu/armv7/am33xx/clock_ti816x.c b/arch/arm/mach-omap2/am33xx/clock_ti816x.c
index ace4a5afef..079ddd7eb9 100644
--- a/arch/arm/cpu/armv7/am33xx/clock_ti816x.c
+++ b/arch/arm/mach-omap2/am33xx/clock_ti816x.c
@@ -429,6 +429,11 @@ void setup_clocks_for_console(void)
 		;
 }
 
+void setup_early_clocks(void)
+{
+	setup_clocks_for_console();
+}
+
 void prcm_init(void)
 {
 	/* Enable the control */
diff --git a/arch/arm/cpu/armv7/am33xx/ddr.c b/arch/arm/mach-omap2/am33xx/ddr.c
index 6acf30c5db..6acf30c5db 100644
--- a/arch/arm/cpu/armv7/am33xx/ddr.c
+++ b/arch/arm/mach-omap2/am33xx/ddr.c
diff --git a/arch/arm/cpu/armv7/am33xx/emif4.c b/arch/arm/mach-omap2/am33xx/emif4.c
index 27fa3fb462..27fa3fb462 100644
--- a/arch/arm/cpu/armv7/am33xx/emif4.c
+++ b/arch/arm/mach-omap2/am33xx/emif4.c
diff --git a/arch/arm/cpu/armv7/am33xx/mux.c b/arch/arm/mach-omap2/am33xx/mux.c
index 2ded47228d..2ded47228d 100644
--- a/arch/arm/cpu/armv7/am33xx/mux.c
+++ b/arch/arm/mach-omap2/am33xx/mux.c
diff --git a/arch/arm/cpu/armv7/am33xx/sys_info.c b/arch/arm/mach-omap2/am33xx/sys_info.c
index f0f72fa6d4..f0f72fa6d4 100644
--- a/arch/arm/cpu/armv7/am33xx/sys_info.c
+++ b/arch/arm/mach-omap2/am33xx/sys_info.c
diff --git a/arch/arm/cpu/armv7/am33xx/u-boot-spl.lds b/arch/arm/mach-omap2/am33xx/u-boot-spl.lds
index 07cf267878..07cf267878 100644
--- a/arch/arm/cpu/armv7/am33xx/u-boot-spl.lds
+++ b/arch/arm/mach-omap2/am33xx/u-boot-spl.lds
diff --git a/arch/arm/cpu/armv7/omap-common/boot-common.c b/arch/arm/mach-omap2/boot-common.c
index 385310ba1e..385310ba1e 100644
--- a/arch/arm/cpu/armv7/omap-common/boot-common.c
+++ b/arch/arm/mach-omap2/boot-common.c
diff --git a/arch/arm/cpu/armv7/omap-common/clocks-common.c b/arch/arm/mach-omap2/clocks-common.c
index 9b97583104..9b97583104 100644
--- a/arch/arm/cpu/armv7/omap-common/clocks-common.c
+++ b/arch/arm/mach-omap2/clocks-common.c
diff --git a/arch/arm/cpu/armv7/am33xx/config.mk b/arch/arm/mach-omap2/config.mk
index 87b76d96a8..5368f6b2d7 100644
--- a/arch/arm/cpu/armv7/am33xx/config.mk
+++ b/arch/arm/mach-omap2/config.mk
@@ -1,13 +1,12 @@
 #
 # Copyright (C) 2011, Texas Instruments, Incorporated - http://www.ti.com/
 #
-# SPDX-License-Identifier:	GPL-2.0+
-#
+# SPDX-License-Identifier:      GPL-2.0+
 
-include  $(srctree)/$(CPUDIR)/omap-common/config_secure.mk
+include  $(srctree)/arch/arm/mach-omap2/config_secure.mk
 
 ifdef CONFIG_SPL_BUILD
-ifeq ($(CONFIG_TI_SECURE_DEVICE),y)
+ifeq ($(CONFIG_AM33XX)$(CONFIG_TI_SECURE_DEVICE),yy)
 #
 # For booting from SPI use
 # u-boot-spl_HS_SPI_X-LOADER to program flash
@@ -30,19 +29,25 @@ ifeq ($(CONFIG_TI_SECURE_DEVICE),y)
 #
 # Refer to README.ti-secure for more info
 #
-ALL-y	+= u-boot-spl_HS_ISSW
+ALL-y += u-boot-spl_HS_ISSW
 ALL-y += u-boot-spl_HS_SPI_X-LOADER
 ALL-y += u-boot-spl_HS_X-LOADER
 ALL-y += u-boot-spl_HS_MLO
 ALL-y += u-boot-spl_HS_2ND
 else
-ALL-y	+= MLO
+ifeq ($(CONFIG_OMAP54XX)$(CONFIG_TI_SECURE_DEVICE),yy)
+ALL-y += u-boot-spl_HS_MLO u-boot-spl_HS_X-LOADER
+else
+ALL-y += MLO
+ifeq ($(CONFIG_AM33XX),y)
 ALL-y += MLO.byteswap
 endif
+endif
+endif
 else
 ifeq ($(CONFIG_TI_SECURE_DEVICE),y)
 ALL-$(CONFIG_QSPI_BOOT) += u-boot_HS_XIP_X-LOADER
 ALL-$(CONFIG_SPL_LOAD_FIT) += u-boot_HS.img
 endif
-ALL-y	+= u-boot.img
+ALL-y += u-boot.img
 endif
diff --git a/arch/arm/cpu/armv7/omap-common/config_secure.mk b/arch/arm/mach-omap2/config_secure.mk
index 1122439e38..1122439e38 100644
--- a/arch/arm/cpu/armv7/omap-common/config_secure.mk
+++ b/arch/arm/mach-omap2/config_secure.mk
diff --git a/arch/arm/cpu/armv7/omap-common/emif-common.c b/arch/arm/mach-omap2/emif-common.c
index b26984e26c..b26984e26c 100644
--- a/arch/arm/cpu/armv7/omap-common/emif-common.c
+++ b/arch/arm/mach-omap2/emif-common.c
diff --git a/arch/arm/cpu/armv7/omap-common/hwinit-common.c b/arch/arm/mach-omap2/hwinit-common.c
index f317293988..f317293988 100644
--- a/arch/arm/cpu/armv7/omap-common/hwinit-common.c
+++ b/arch/arm/mach-omap2/hwinit-common.c
diff --git a/arch/arm/cpu/armv7/omap-common/lowlevel_init.S b/arch/arm/mach-omap2/lowlevel_init.S
index 8ce12c8e9a..8ce12c8e9a 100644
--- a/arch/arm/cpu/armv7/omap-common/lowlevel_init.S
+++ b/arch/arm/mach-omap2/lowlevel_init.S
diff --git a/arch/arm/cpu/armv7/omap-common/mem-common.c b/arch/arm/mach-omap2/mem-common.c
index d72e82e028..d72e82e028 100644
--- a/arch/arm/cpu/armv7/omap-common/mem-common.c
+++ b/arch/arm/mach-omap2/mem-common.c
diff --git a/arch/arm/cpu/armv7/omap-common/omap-cache.c b/arch/arm/mach-omap2/omap-cache.c
index b37163a4f3..b37163a4f3 100644
--- a/arch/arm/cpu/armv7/omap-common/omap-cache.c
+++ b/arch/arm/mach-omap2/omap-cache.c
diff --git a/arch/arm/cpu/armv7/omap3/Kconfig b/arch/arm/mach-omap2/omap3/Kconfig
index 7d884a237b..7d884a237b 100644
--- a/arch/arm/cpu/armv7/omap3/Kconfig
+++ b/arch/arm/mach-omap2/omap3/Kconfig
diff --git a/arch/arm/cpu/armv7/omap3/Makefile b/arch/arm/mach-omap2/omap3/Makefile
index b2fce966d9..b2fce966d9 100644
--- a/arch/arm/cpu/armv7/omap3/Makefile
+++ b/arch/arm/mach-omap2/omap3/Makefile
diff --git a/arch/arm/cpu/armv7/omap3/am35x_musb.c b/arch/arm/mach-omap2/omap3/am35x_musb.c
index 74dd105eb6..74dd105eb6 100644
--- a/arch/arm/cpu/armv7/omap3/am35x_musb.c
+++ b/arch/arm/mach-omap2/omap3/am35x_musb.c
diff --git a/arch/arm/cpu/armv7/omap3/board.c b/arch/arm/mach-omap2/omap3/board.c
index 5f5597772b..5f5597772b 100644
--- a/arch/arm/cpu/armv7/omap3/board.c
+++ b/arch/arm/mach-omap2/omap3/board.c
diff --git a/arch/arm/cpu/armv7/omap3/boot.c b/arch/arm/mach-omap2/omap3/boot.c
index 64b242b752..64b242b752 100644
--- a/arch/arm/cpu/armv7/omap3/boot.c
+++ b/arch/arm/mach-omap2/omap3/boot.c
diff --git a/arch/arm/cpu/armv7/omap3/clock.c b/arch/arm/mach-omap2/omap3/clock.c
index 006969e780..006969e780 100644
--- a/arch/arm/cpu/armv7/omap3/clock.c
+++ b/arch/arm/mach-omap2/omap3/clock.c
diff --git a/arch/arm/cpu/armv7/omap3/emac.c b/arch/arm/mach-omap2/omap3/emac.c
index 37f4b8b490..37f4b8b490 100644
--- a/arch/arm/cpu/armv7/omap3/emac.c
+++ b/arch/arm/mach-omap2/omap3/emac.c
diff --git a/arch/arm/cpu/armv7/omap3/emif4.c b/arch/arm/mach-omap2/omap3/emif4.c
index a2aadc9816..a2aadc9816 100644
--- a/arch/arm/cpu/armv7/omap3/emif4.c
+++ b/arch/arm/mach-omap2/omap3/emif4.c
diff --git a/arch/arm/cpu/armv7/omap3/lowlevel_init.S b/arch/arm/mach-omap2/omap3/lowlevel_init.S
index 1e587723ce..1e587723ce 100644
--- a/arch/arm/cpu/armv7/omap3/lowlevel_init.S
+++ b/arch/arm/mach-omap2/omap3/lowlevel_init.S
diff --git a/arch/arm/cpu/armv7/omap3/sdrc.c b/arch/arm/mach-omap2/omap3/sdrc.c
index 4f15ac9cb5..4f15ac9cb5 100644
--- a/arch/arm/cpu/armv7/omap3/sdrc.c
+++ b/arch/arm/mach-omap2/omap3/sdrc.c
diff --git a/arch/arm/cpu/armv7/omap3/spl_id_nand.c b/arch/arm/mach-omap2/omap3/spl_id_nand.c
index 0e2f0a2f6d..0e2f0a2f6d 100644
--- a/arch/arm/cpu/armv7/omap3/spl_id_nand.c
+++ b/arch/arm/mach-omap2/omap3/spl_id_nand.c
diff --git a/arch/arm/cpu/armv7/omap3/sys_info.c b/arch/arm/mach-omap2/omap3/sys_info.c
index 6818fab253..6818fab253 100644
--- a/arch/arm/cpu/armv7/omap3/sys_info.c
+++ b/arch/arm/mach-omap2/omap3/sys_info.c
diff --git a/arch/arm/cpu/armv7/omap4/Kconfig b/arch/arm/mach-omap2/omap4/Kconfig
index 2091dd7815..2091dd7815 100644
--- a/arch/arm/cpu/armv7/omap4/Kconfig
+++ b/arch/arm/mach-omap2/omap4/Kconfig
diff --git a/arch/arm/cpu/armv7/omap4/Makefile b/arch/arm/mach-omap2/omap4/Makefile
index 564f1f632f..564f1f632f 100644
--- a/arch/arm/cpu/armv7/omap4/Makefile
+++ b/arch/arm/mach-omap2/omap4/Makefile
diff --git a/arch/arm/cpu/armv7/omap4/boot.c b/arch/arm/mach-omap2/omap4/boot.c
index 7f5791e9ed..7f5791e9ed 100644
--- a/arch/arm/cpu/armv7/omap4/boot.c
+++ b/arch/arm/mach-omap2/omap4/boot.c
diff --git a/arch/arm/cpu/armv7/omap4/emif.c b/arch/arm/mach-omap2/omap4/emif.c
index 403c3c6146..403c3c6146 100644
--- a/arch/arm/cpu/armv7/omap4/emif.c
+++ b/arch/arm/mach-omap2/omap4/emif.c
diff --git a/arch/arm/cpu/armv7/omap4/hw_data.c b/arch/arm/mach-omap2/omap4/hw_data.c
index 02c06c1577..02c06c1577 100644
--- a/arch/arm/cpu/armv7/omap4/hw_data.c
+++ b/arch/arm/mach-omap2/omap4/hw_data.c
diff --git a/arch/arm/cpu/armv7/omap4/hwinit.c b/arch/arm/mach-omap2/omap4/hwinit.c
index 7c6638ca80..7c6638ca80 100644
--- a/arch/arm/cpu/armv7/omap4/hwinit.c
+++ b/arch/arm/mach-omap2/omap4/hwinit.c
diff --git a/arch/arm/cpu/armv7/omap4/prcm-regs.c b/arch/arm/mach-omap2/omap4/prcm-regs.c
index 2f0e1e851a..2f0e1e851a 100644
--- a/arch/arm/cpu/armv7/omap4/prcm-regs.c
+++ b/arch/arm/mach-omap2/omap4/prcm-regs.c
diff --git a/arch/arm/cpu/armv7/omap4/sdram_elpida.c b/arch/arm/mach-omap2/omap4/sdram_elpida.c
index 78b4f09ce2..78b4f09ce2 100644
--- a/arch/arm/cpu/armv7/omap4/sdram_elpida.c
+++ b/arch/arm/mach-omap2/omap4/sdram_elpida.c
diff --git a/arch/arm/cpu/armv7/omap5/Kconfig b/arch/arm/mach-omap2/omap5/Kconfig
index 22259dcc5c..22259dcc5c 100644
--- a/arch/arm/cpu/armv7/omap5/Kconfig
+++ b/arch/arm/mach-omap2/omap5/Kconfig
diff --git a/arch/arm/cpu/armv7/omap5/Makefile b/arch/arm/mach-omap2/omap5/Makefile
index 0212df73c1..0212df73c1 100644
--- a/arch/arm/cpu/armv7/omap5/Makefile
+++ b/arch/arm/mach-omap2/omap5/Makefile
diff --git a/arch/arm/cpu/armv7/omap5/abb.c b/arch/arm/mach-omap2/omap5/abb.c
index 3bf88979e5..3bf88979e5 100644
--- a/arch/arm/cpu/armv7/omap5/abb.c
+++ b/arch/arm/mach-omap2/omap5/abb.c
diff --git a/arch/arm/cpu/armv7/omap5/boot.c b/arch/arm/mach-omap2/omap5/boot.c
index 583beccad5..583beccad5 100644
--- a/arch/arm/cpu/armv7/omap5/boot.c
+++ b/arch/arm/mach-omap2/omap5/boot.c
diff --git a/arch/arm/cpu/armv7/omap5/dra7xx_iodelay.c b/arch/arm/mach-omap2/omap5/dra7xx_iodelay.c
index 87987308ac..87987308ac 100644
--- a/arch/arm/cpu/armv7/omap5/dra7xx_iodelay.c
+++ b/arch/arm/mach-omap2/omap5/dra7xx_iodelay.c
diff --git a/arch/arm/cpu/armv7/omap5/emif.c b/arch/arm/mach-omap2/omap5/emif.c
index b1203a37af..b1203a37af 100644
--- a/arch/arm/cpu/armv7/omap5/emif.c
+++ b/arch/arm/mach-omap2/omap5/emif.c
diff --git a/arch/arm/cpu/armv7/omap5/fdt.c b/arch/arm/mach-omap2/omap5/fdt.c
index da8d59bb59..da8d59bb59 100644
--- a/arch/arm/cpu/armv7/omap5/fdt.c
+++ b/arch/arm/mach-omap2/omap5/fdt.c
diff --git a/arch/arm/cpu/armv7/omap5/hw_data.c b/arch/arm/mach-omap2/omap5/hw_data.c
index fc99135824..fc99135824 100644
--- a/arch/arm/cpu/armv7/omap5/hw_data.c
+++ b/arch/arm/mach-omap2/omap5/hw_data.c
diff --git a/arch/arm/cpu/armv7/omap5/hwinit.c b/arch/arm/mach-omap2/omap5/hwinit.c
index e3ac8bbe95..e3ac8bbe95 100644
--- a/arch/arm/cpu/armv7/omap5/hwinit.c
+++ b/arch/arm/mach-omap2/omap5/hwinit.c
diff --git a/arch/arm/cpu/armv7/omap5/prcm-regs.c b/arch/arm/mach-omap2/omap5/prcm-regs.c
index b5f1d700fd..b5f1d700fd 100644
--- a/arch/arm/cpu/armv7/omap5/prcm-regs.c
+++ b/arch/arm/mach-omap2/omap5/prcm-regs.c
diff --git a/arch/arm/cpu/armv7/omap5/sdram.c b/arch/arm/mach-omap2/omap5/sdram.c
index 7712923d85..7712923d85 100644
--- a/arch/arm/cpu/armv7/omap5/sdram.c
+++ b/arch/arm/mach-omap2/omap5/sdram.c
diff --git a/arch/arm/cpu/armv7/omap5/sec-fxns.c b/arch/arm/mach-omap2/omap5/sec-fxns.c
index 33d4ea4eac..33d4ea4eac 100644
--- a/arch/arm/cpu/armv7/omap5/sec-fxns.c
+++ b/arch/arm/mach-omap2/omap5/sec-fxns.c
diff --git a/arch/arm/cpu/armv7/omap-common/pipe3-phy.c b/arch/arm/mach-omap2/pipe3-phy.c
index e02e3ec23e..e02e3ec23e 100644
--- a/arch/arm/cpu/armv7/omap-common/pipe3-phy.c
+++ b/arch/arm/mach-omap2/pipe3-phy.c
diff --git a/arch/arm/cpu/armv7/omap-common/pipe3-phy.h b/arch/arm/mach-omap2/pipe3-phy.h
index 441f49a3f9..441f49a3f9 100644
--- a/arch/arm/cpu/armv7/omap-common/pipe3-phy.h
+++ b/arch/arm/mach-omap2/pipe3-phy.h
diff --git a/arch/arm/cpu/armv7/omap-common/reset.c b/arch/arm/mach-omap2/reset.c
index 91ad031ddd..91ad031ddd 100644
--- a/arch/arm/cpu/armv7/omap-common/reset.c
+++ b/arch/arm/mach-omap2/reset.c
diff --git a/arch/arm/cpu/armv7/omap-common/sata.c b/arch/arm/mach-omap2/sata.c
index 2c2d1bce36..2c2d1bce36 100644
--- a/arch/arm/cpu/armv7/omap-common/sata.c
+++ b/arch/arm/mach-omap2/sata.c
diff --git a/arch/arm/cpu/armv7/omap-common/sec-common.c b/arch/arm/mach-omap2/sec-common.c
index 246a2393da..246a2393da 100644
--- a/arch/arm/cpu/armv7/omap-common/sec-common.c
+++ b/arch/arm/mach-omap2/sec-common.c
diff --git a/arch/arm/cpu/armv7/omap-common/timer.c b/arch/arm/mach-omap2/timer.c
index 49e3a971d9..49e3a971d9 100644
--- a/arch/arm/cpu/armv7/omap-common/timer.c
+++ b/arch/arm/mach-omap2/timer.c
diff --git a/arch/arm/cpu/armv7/omap-common/u-boot-spl.lds b/arch/arm/mach-omap2/u-boot-spl.lds
index 8fec715ca5..8fec715ca5 100644
--- a/arch/arm/cpu/armv7/omap-common/u-boot-spl.lds
+++ b/arch/arm/mach-omap2/u-boot-spl.lds
diff --git a/arch/arm/cpu/armv7/omap-common/utils.c b/arch/arm/mach-omap2/utils.c
index 2d03ebfbd3..2d03ebfbd3 100644
--- a/arch/arm/cpu/armv7/omap-common/utils.c
+++ b/arch/arm/mach-omap2/utils.c
diff --git a/arch/arm/cpu/armv7/omap-common/vc.c b/arch/arm/mach-omap2/vc.c
index a68f1d145d..a68f1d145d 100644
--- a/arch/arm/cpu/armv7/omap-common/vc.c
+++ b/arch/arm/mach-omap2/vc.c
diff --git a/arch/arm/mach-rmobile/lowlevel_init_gen3.S b/arch/arm/mach-rmobile/lowlevel_init_gen3.S
index 88ff56ecbf..11acce0395 100644
--- a/arch/arm/mach-rmobile/lowlevel_init_gen3.S
+++ b/arch/arm/mach-rmobile/lowlevel_init_gen3.S
@@ -61,11 +61,18 @@ ENTRY(lowlevel_init)
 	/*
 	 * All slaves will enter EL2 and optionally EL1.
 	 */
+	adr	x3, lowlevel_in_el2
+	ldr	x4, =ES_TO_AARCH64
 	bl	armv8_switch_to_el2
+
+lowlevel_in_el2:
 #ifdef CONFIG_ARMV8_SWITCH_TO_EL1
+	adr	x3, lowlevel_in_el1
+	ldr	x4, =ES_TO_AARCH64
 	bl	armv8_switch_to_el1
-#endif
 
+lowlevel_in_el1:
+#endif
 #endif /* CONFIG_ARMV8_MULTIENTRY */
 
 	bl      s_init
diff --git a/arch/arm/mach-rockchip/Kconfig b/arch/arm/mach-rockchip/Kconfig
index 8a5d62a735..5c4a4c2291 100644
--- a/arch/arm/mach-rockchip/Kconfig
+++ b/arch/arm/mach-rockchip/Kconfig
@@ -21,7 +21,7 @@ config ROCKCHIP_RK3288
 	  including NEON and GPU, 1MB L2 cache, Mali-T7 graphics, two
 	  video interfaces supporting HDMI and eDP, several DDR3 options
 	  and video codec support. Peripherals include Gigabit Ethernet,
-	  USB2 host and OTG, SDIO, I2S, UART,s, SPI, I2C and PWMs.
+	  USB2 host and OTG, SDIO, I2S, UARTs, SPI, I2C and PWMs.
 
 config ROCKCHIP_RK3399
 	bool "Support Rockchip RK3399"
diff --git a/arch/arm/mach-rockchip/rk3288-board-spl.c b/arch/arm/mach-rockchip/rk3288-board-spl.c
index 0f40351769..930939ad24 100644
--- a/arch/arm/mach-rockchip/rk3288-board-spl.c
+++ b/arch/arm/mach-rockchip/rk3288-board-spl.c
@@ -64,6 +64,10 @@ u32 spl_boot_device(void)
 	}
 
 fallback:
+#elif defined(CONFIG_TARGET_CHROMEBOOK_JERRY) || \
+		defined(CONFIG_TARGET_CHROMEBIT_MICKEY) || \
+		defined(CONFIG_TARGET_CHROMEBOOK_MINNIE)
+	return BOOT_DEVICE_SPI;
 #endif
 	return BOOT_DEVICE_MMC1;
 }
diff --git a/arch/arm/mach-rockchip/rk3288-board.c b/arch/arm/mach-rockchip/rk3288-board.c
index baf9522bcd..bca6075c2c 100644
--- a/arch/arm/mach-rockchip/rk3288-board.c
+++ b/arch/arm/mach-rockchip/rk3288-board.c
@@ -16,6 +16,8 @@
 #include <asm/arch/boot_mode.h>
 #include <asm/gpio.h>
 #include <dm/pinctrl.h>
+#include <dt-bindings/clock/rk3288-cru.h>
+#include <power/regulator.h>
 
 DECLARE_GLOBAL_DATA_PTR;
 
@@ -56,6 +58,39 @@ int board_late_init(void)
 	return rk_board_late_init();
 }
 
+#ifndef CONFIG_ROCKCHIP_SPL_BACK_TO_BROM
+static int veyron_init(void)
+{
+	struct udevice *dev;
+	struct clk clk;
+	int ret;
+
+	ret = regulator_get_by_platname("vdd_arm", &dev);
+	if (ret)
+		return ret;
+
+	/* Slowly raise to max CPU voltage to prevent overshoot */
+	ret = regulator_set_value(dev, 1200000);
+	if (ret)
+		return ret;
+	udelay(175); /* Must wait for voltage to stabilize, 2mV/us */
+	ret = regulator_set_value(dev, 1400000);
+	if (ret)
+		return ret;
+	udelay(100); /* Must wait for voltage to stabilize, 2mV/us */
+
+	ret = rockchip_get_clk(&clk.dev);
+	if (ret)
+		return ret;
+	clk.id = PLL_APLL;
+	ret = clk_set_rate(&clk, 1800000000);
+	if (IS_ERR_VALUE(ret))
+		return ret;
+
+	return 0;
+}
+#endif
+
 int board_init(void)
 {
 #ifdef CONFIG_ROCKCHIP_SPL_BACK_TO_BROM
@@ -87,6 +122,15 @@ err:
 
 	return -1;
 #else
+	int ret;
+
+	/* We do some SoC one time setting here */
+	if (!fdt_node_check_compatible(gd->fdt_blob, 0, "google,veyron")) {
+		ret = veyron_init();
+		if (ret)
+			return ret;
+	}
+
 	return 0;
 #endif
 }
diff --git a/arch/arm/mach-rockchip/rk3288/Kconfig b/arch/arm/mach-rockchip/rk3288/Kconfig
index c53d2e2033..223ae41dd4 100644
--- a/arch/arm/mach-rockchip/rk3288/Kconfig
+++ b/arch/arm/mach-rockchip/rk3288/Kconfig
@@ -49,6 +49,25 @@ config TARGET_CHROMEBOOK_JERRY
 	  WiFi. It includes a Chrome OS EC (Cortex-M3) to provide access to
 	  the keyboard and battery functions.
 
+config TARGET_CHROMEBIT_MICKEY
+	bool "Google/Rockchip Veyron-Mickey Chromebit"
+	help
+	  Mickey is a small RK3288-based device with one USB 3.0 port, HDMI
+	  and WiFi. It has a separate power port and is designed to connect
+	  to the HDMI input of a monitor or TV. It has no internal battery.
+	  Typically a USB hub or wireless keyboard/touchpad is used to get
+	  keyboard and mouse access.
+
+config TARGET_CHROMEBOOK_MINNIE
+	bool "Google/Rockchip Veyron-Minnie Chromebook"
+	help
+	  Jerry is a RK3288-based convertible clamshell device with 2 USB 3.0
+	  ports, micro HDMI, a 10.1-inch 1280x800 EDP display, micro-SD card,
+	  HD camera, touchpad, WiFi and Bluetooth. It includes a Chrome OS
+	  EC (Cortex-M3) to provide access to the keyboard and battery
+	  functions. It includes 2 or 4GB of SDRAM and 16 or 32GB of
+	  internal MMC. The product name is ASUS Chromebook Flip.
+
 config TARGET_ROCK2
 	bool "Radxa Rock 2"
 	help
@@ -88,7 +107,7 @@ source "board/chipspark/popmetal_rk3288/Kconfig"
 
 source "board/firefly/firefly-rk3288/Kconfig"
 
-source "board/google/chromebook_jerry/Kconfig"
+source "board/google/veyron/Kconfig"
 
 source "board/radxa/rock2/Kconfig"
 
diff --git a/arch/arm/mach-zynq/Kconfig b/arch/arm/mach-zynq/Kconfig
index a1175eea6e..c46591846a 100644
--- a/arch/arm/mach-zynq/Kconfig
+++ b/arch/arm/mach-zynq/Kconfig
@@ -28,6 +28,7 @@ config SYS_BOARD
 	default "zynq"
 
 config SYS_VENDOR
+	string "Vendor name"
 	default "xilinx"
 
 config SYS_SOC
@@ -44,4 +45,11 @@ config SYS_CONFIG_NAME
 config SYS_MALLOC_F_LEN
 	default 0x600
 
+config BOOT_INIT_FILE
+	string "boot.bin init register filename"
+	default ""
+	help
+	  Add register writes to boot.bin format (max 256 pairs).
+	  Expect a table of register-value pairs, e.g. "0x12345678 0x4321"
+
 endif
diff --git a/arch/arm/mach-zynq/slcr.c b/arch/arm/mach-zynq/slcr.c
index 05f4099aae..2d3bf2acef 100644
--- a/arch/arm/mach-zynq/slcr.c
+++ b/arch/arm/mach-zynq/slcr.c
@@ -14,6 +14,9 @@
 #define SLCR_LOCK_MAGIC		0x767B
 #define SLCR_UNLOCK_MAGIC	0xDF0D
 
+#define SLCR_NAND_L2_SEL		0x10
+#define SLCR_NAND_L2_SEL_MASK		0x1F
+
 #define SLCR_USB_L1_SEL			0x04
 
 #define SLCR_IDCODE_MASK	0x1F000
@@ -36,6 +39,14 @@ struct zynq_slcr_mio_get_status {
 	u32 check_val;
 };
 
+static const int nand8_pins[] = {
+	0, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13
+};
+
+static const int nand16_pins[] = {
+	16, 17, 18, 19, 20, 21, 22, 23
+};
+
 static const int usb0_pins[] = {
 	28, 29, 30, 31, 32, 33, 34, 35, 36, 37, 38, 39
 };
@@ -46,6 +57,20 @@ static const int usb1_pins[] = {
 
 static const struct zynq_slcr_mio_get_status mio_periphs[] = {
 	{
+		"nand8",
+		nand8_pins,
+		ARRAY_SIZE(nand8_pins),
+		SLCR_NAND_L2_SEL_MASK,
+		SLCR_NAND_L2_SEL,
+	},
+	{
+		"nand16",
+		nand16_pins,
+		ARRAY_SIZE(nand16_pins),
+		SLCR_NAND_L2_SEL_MASK,
+		SLCR_NAND_L2_SEL,
+	},
+	{
 		"usb0",
 		usb0_pins,
 		ARRAY_SIZE(usb0_pins),
diff --git a/arch/powerpc/cpu/mpc512x/start.S b/arch/powerpc/cpu/mpc512x/start.S
index 471d401d49..dd3066ec4c 100644
--- a/arch/powerpc/cpu/mpc512x/start.S
+++ b/arch/powerpc/cpu/mpc512x/start.S
@@ -443,6 +443,11 @@ get_pvr:
 	mfspr	r3, PVR
 	blr
 
+	.globl get_svr
+get_svr:
+	mfspr	r3, SVR
+	blr
+
 /*-------------------------------------------------------------------*/
 
 /*
diff --git a/arch/powerpc/cpu/mpc85xx/fsl_corenet_serdes.c b/arch/powerpc/cpu/mpc85xx/fsl_corenet_serdes.c
index 72d5e3007d..b6c4341544 100644
--- a/arch/powerpc/cpu/mpc85xx/fsl_corenet_serdes.c
+++ b/arch/powerpc/cpu/mpc85xx/fsl_corenet_serdes.c
@@ -607,6 +607,9 @@ void fsl_serdes_init(void)
 
 	soc_serdes_init();
 
+	/* Set the first bit to indicate serdes has been initialized */
+	serdes_prtcl_map |= (1 << NONE);
+
 #ifdef CONFIG_SYS_P4080_ERRATUM_SERDES8
 	/*
 	 * Bank two uses the clock from bank three, so if bank two is enabled,
@@ -862,9 +865,6 @@ void fsl_serdes_init(void)
 			     SRDS_RSTCTL_SDPD);
 	}
 #endif
-
-	/* Set the first bit to indicate serdes has been initialized */
-	serdes_prtcl_map |= (1 << NONE);
 }
 
 const char *serdes_clock_to_string(u32 clock)
diff --git a/arch/x86/config.mk b/arch/x86/config.mk
index d7addd8728..1697dca47f 100644
--- a/arch/x86/config.mk
+++ b/arch/x86/config.mk
@@ -45,8 +45,8 @@ endif
 
 EFIPAYLOAD_BFDARCH = i386
 
-LDSCRIPT_EFI := $(srctree)/$(CPUDIR)/efi/elf_$(EFIARCH)_efi.lds
-EFISTUB := crt0-efi-$(EFIARCH).o reloc_$(EFIARCH).o
+LDSCRIPT_EFI := $(srctree)/arch/x86/lib/elf_$(EFIARCH)_efi.lds
+EFISTUB := crt0_$(EFIARCH)_efi.o reloc_$(EFIARCH)_efi.o
 OBJCOPYFLAGS_EFI += --target=efi-app-$(EFIARCH)
 
 CPPFLAGS_REMOVE_crt0-efi-$(EFIARCH).o += $(CFLAGS_NON_EFI)
@@ -65,3 +65,19 @@ PLATFORM_LDFLAGS += --emit-relocs
 LDFLAGS_FINAL += --gc-sections -pie
 
 endif
+
+ifneq ($(CONFIG_EFI_STUB)$(CONFIG_CMD_BOOTEFI_HELLO_COMPILE),)
+
+ifneq ($(CONFIG_EFI_STUB_64BIT),)
+EFI_LDS := elf_x86_64_efi.lds
+EFI_CRT0 := crt0_x86_64_efi.o
+EFI_RELOC := reloc_x86_64_efi.o
+EFI_TARGET := --target=efi-app-ia32
+else
+EFI_LDS := elf_ia32_efi.lds
+EFI_CRT0 := crt0_ia32_efi.o
+EFI_RELOC := reloc_ia32_efi.o
+EFI_TARGET := --target=efi-app-x86_64
+endif
+
+endif
diff --git a/arch/x86/include/asm/u-boot-x86.h b/arch/x86/include/asm/u-boot-x86.h
index 031740b708..4f901f9392 100644
--- a/arch/x86/include/asm/u-boot-x86.h
+++ b/arch/x86/include/asm/u-boot-x86.h
@@ -74,6 +74,7 @@ static inline __attribute__((no_instrument_function)) uint64_t rdtsc(void)
 /* board/... */
 void timer_set_tsc_base(uint64_t new_base);
 uint64_t timer_get_tsc(void);
+void board_quiesce_devices(void);
 
 void quick_ram_check(void);
 
diff --git a/arch/x86/lib/Makefile b/arch/x86/lib/Makefile
index b9c29226bd..723288f7b2 100644
--- a/arch/x86/lib/Makefile
+++ b/arch/x86/lib/Makefile
@@ -44,3 +44,26 @@ NORMAL_LIBGCC = $(shell $(CC) $(PLATFORM_CPPFLAGS) -print-libgcc-file-name)
 OBJCOPYFLAGS := --prefix-symbols=__normal_
 $(obj)/lib.a: $(NORMAL_LIBGCC) FORCE
 	$(call if_changed,objcopy)
+
+obj-$(CONFIG_EFI_APP) += crt0_ia32_efi.o reloc_ia32_efi.o
+
+ifneq ($(CONFIG_EFI_STUB),)
+
+CFLAGS_REMOVE_reloc_ia32_efi.o += -mregparm=3
+CFLAGS_reloc_ia32_efi.o += -fpic -fshort-wchar
+
+# When building for 64-bit we must remove the i386-specific flags
+CFLAGS_REMOVE_reloc_x86_64_efi.o += -mregparm=3 -march=i386 -m32
+CFLAGS_reloc_x86_64_efi.o += -fpic -fshort-wchar
+
+AFLAGS_REMOVE_crt0_x86_64_efi.o += -mregparm=3 -march=i386 -m32
+AFLAGS_crt0_x86_64_efi.o += -fpic -fshort-wchar
+
+extra-$(CONFIG_EFI_STUB_32BIT) += crt0_ia32_efi.o reloc_ia32_efi.o
+extra-$(CONFIG_EFI_STUB_64BIT) += crt0_x86_64_efi.o reloc_x86_64_efi.o
+
+endif
+
+ifneq ($(CONFIG_EFI_STUB)$(CONFIG_CMD_BOOTEFI_HELLO_COMPILE),)
+extra-y += $(EFI_CRT0) $(EFI_RELOC)
+endif
diff --git a/arch/x86/lib/bootm.c b/arch/x86/lib/bootm.c
index 7cf9de4d7b..80fadef34e 100644
--- a/arch/x86/lib/bootm.c
+++ b/arch/x86/lib/bootm.c
@@ -26,6 +26,10 @@ DECLARE_GLOBAL_DATA_PTR;
 
 #define COMMAND_LINE_OFFSET 0x9000
 
+__weak void board_quiesce_devices(void)
+{
+}
+
 void bootm_announce_and_cleanup(void)
 {
 	printf("\nStarting kernel ...\n\n");
diff --git a/arch/x86/lib/efi/crt0-efi-ia32.S b/arch/x86/lib/crt0_ia32_efi.S
index 30e5eb0c1a..30e5eb0c1a 100644
--- a/arch/x86/lib/efi/crt0-efi-ia32.S
+++ b/arch/x86/lib/crt0_ia32_efi.S
diff --git a/arch/x86/lib/efi/crt0-efi-x86_64.S b/arch/x86/lib/crt0_x86_64_efi.S
index c5cbf4108b..c5cbf4108b 100644
--- a/arch/x86/lib/efi/crt0-efi-x86_64.S
+++ b/arch/x86/lib/crt0_x86_64_efi.S
diff --git a/arch/x86/lib/efi/Makefile b/arch/x86/lib/efi/Makefile
index af4503e1c2..43aadfc996 100644
--- a/arch/x86/lib/efi/Makefile
+++ b/arch/x86/lib/efi/Makefile
@@ -7,21 +7,3 @@
 
 obj-$(CONFIG_EFI_STUB) += car.o
 obj-$(CONFIG_EFI_STUB) += efi.o
-
-obj-$(CONFIG_EFI_APP) += crt0-efi-ia32.o reloc_ia32.o
-
-ifneq ($(CONFIG_EFI_STUB),)
-
-CFLAGS_REMOVE_reloc_ia32.o += -mregparm=3
-CFLAGS_reloc_ia32.o += -fpic -fshort-wchar
-
-# When building for 64-bit we must remove the i386-specific flags
-CFLAGS_REMOVE_reloc_x86_64.o += -mregparm=3 -march=i386 -m32
-CFLAGS_reloc_x86_64.o += -fpic -fshort-wchar
-
-AFLAGS_REMOVE_crt0-efi-x86_64.o += -mregparm=3 -march=i386 -m32
-AFLAGS_crt0-efi-x86_64.o += -fpic -fshort-wchar
-
-extra-$(CONFIG_EFI_STUB_32BIT) += crt0-efi-ia32.o reloc_ia32.o
-extra-$(CONFIG_EFI_STUB_64BIT) += crt0-efi-x86_64.o reloc_x86_64.o
-endif
diff --git a/arch/x86/cpu/efi/elf_ia32_efi.lds b/arch/x86/lib/elf_ia32_efi.lds
index cd3b0a982d..174d36f758 100644
--- a/arch/x86/cpu/efi/elf_ia32_efi.lds
+++ b/arch/x86/lib/elf_ia32_efi.lds
@@ -6,8 +6,6 @@
  * Modified from usr/lib32/elf_ia32_efi.lds in gnu-efi
  */
 
-#include <config.h>
-
 OUTPUT_FORMAT("elf32-i386", "elf32-i386", "elf32-i386")
 OUTPUT_ARCH(i386)
 ENTRY(_start)
diff --git a/arch/x86/cpu/efi/elf_x86_64_efi.lds b/arch/x86/lib/elf_x86_64_efi.lds
index 9d9f05774a..70c7c52332 100644
--- a/arch/x86/cpu/efi/elf_x86_64_efi.lds
+++ b/arch/x86/lib/elf_x86_64_efi.lds
@@ -6,8 +6,6 @@
  * Modified from usr/lib32/elf_x86_64_efi.lds in gnu-efi
  */
 
-#include <config.h>
-
 OUTPUT_FORMAT("elf64-x86-64", "elf64-x86-64", "elf64-x86-64")
 OUTPUT_ARCH(i386:x86-64)
 ENTRY(_start)
diff --git a/arch/x86/lib/efi/reloc_ia32.c b/arch/x86/lib/reloc_ia32_efi.c
index 4d6825515d..4d6825515d 100644
--- a/arch/x86/lib/efi/reloc_ia32.c
+++ b/arch/x86/lib/reloc_ia32_efi.c
diff --git a/arch/x86/lib/efi/reloc_x86_64.c b/arch/x86/lib/reloc_x86_64_efi.c
index 5f71f2ac8a..5f71f2ac8a 100644
--- a/arch/x86/lib/efi/reloc_x86_64.c
+++ b/arch/x86/lib/reloc_x86_64_efi.c
diff --git a/arch/x86/lib/tables.c b/arch/x86/lib/tables.c
index 025b183d6b..5966e5862a 100644
--- a/arch/x86/lib/tables.c
+++ b/arch/x86/lib/tables.c
@@ -12,10 +12,12 @@
 #include <asm/acpi_table.h>
 #include <asm/coreboot_tables.h>
 
+#ifdef CONFIG_GENERATE_SMBIOS_TABLE
 static u32 write_smbios_table_wrapper(u32 addr)
 {
 	return write_smbios_table(addr);
 }
+#endif
 
 /**
  * Function prototype to write a specific configuration table