diff options
| author | Albert ARIBAUD <albert.u.boot@aribaud.net> | 2013-05-30 14:45:06 +0200 |
|---|---|---|
| committer | Albert ARIBAUD <albert.u.boot@aribaud.net> | 2013-05-30 14:45:06 +0200 |
| commit | a19b0dd62d7b8efc658fa1aa685ff5665878f3ee (patch) | |
| tree | 1fadf0fb3da83203ba28f209ec99e1b33e03f4d5 /include | |
| parent | 60985bba58e7695dac1fddae8cdbb62d8cfd1254 (diff) | |
| parent | a71d45d706a5b51c348160163b6c159632273fed (diff) | |
Merge branch 'u-boot/master' into 'u-boot-arm/master'
Conflicts:
common/cmd_fpga.c
drivers/usb/host/ohci-at91.c
Diffstat (limited to 'include')
38 files changed, 566 insertions, 1805 deletions
diff --git a/include/asm-generic/u-boot.h b/include/asm-generic/u-boot.h index a9aa8baf0d..a4bfdac18e 100644 --- a/include/asm-generic/u-boot.h +++ b/include/asm-generic/u-boot.h @@ -61,14 +61,6 @@ typedef struct bd_info { #if defined(CONFIG_MPC83xx) unsigned long bi_immrbar; #endif -#if defined(CONFIG_MPC8220) - unsigned long bi_mbar_base; /* base of internal registers */ - unsigned long bi_inpfreq; /* Input Freq, In MHz */ - unsigned long bi_pcifreq; /* PCI Freq, in MHz */ - unsigned long bi_pevfreq; /* PEV Freq, in MHz */ - unsigned long bi_flbfreq; /* Flexbus Freq, in MHz */ - unsigned long bi_vcofreq; /* VCO Freq, in MHz */ -#endif unsigned long bi_bootflags; /* boot / reboot flag (Unused) */ unsigned long bi_ip_addr; /* IP Address */ unsigned char bi_enetaddr[6]; /* OLD: see README.enetaddr */ diff --git a/include/bootstage.h b/include/bootstage.h index 3b2216b8a8..6dc0422bac 100644 --- a/include/bootstage.h +++ b/include/bootstage.h @@ -221,7 +221,7 @@ enum bootstage_id { */ ulong timer_get_boot_us(void); -#ifndef CONFIG_SPL_BUILD +#if !defined(CONFIG_SPL_BUILD) && !defined(USE_HOSTCC) /* * Board code can implement show_boot_progress() if needed. * @@ -233,10 +233,21 @@ void show_boot_progress(int val); #define show_boot_progress(val) do {} while (0) #endif -#if defined(CONFIG_BOOTSTAGE) && !defined(CONFIG_SPL_BUILD) +#if defined(CONFIG_BOOTSTAGE) && !defined(CONFIG_SPL_BUILD) && \ + !defined(USE_HOSTCC) /* This is the full bootstage implementation */ /** + * Relocate existing bootstage records + * + * Call this after relocation has happened and after malloc has been initted. + * We need to copy any pointers in bootstage records that were added pre- + * relocation, since memory can be overritten later. + * @return Always returns 0, to indicate success + */ +int bootstage_relocate(void); + +/** * Add a new bootstage record * * @param id Bootstage ID to use (ignored if flags & BOOTSTAGEF_ALLOC) @@ -257,6 +268,19 @@ ulong bootstage_error(enum bootstage_id id); ulong bootstage_mark_name(enum bootstage_id id, const char *name); /** + * Mark a time stamp in the given function and line number + * + * See BOOTSTAGE_MARKER() for a convenient macro. + * + * @param file Filename to record (NULL if none) + * @param func Function name to record + * @param linenum Line number to record + * @return recorded time stamp + */ +ulong bootstage_mark_code(const char *file, const char *func, + int linenum); + +/** * Mark the start of a bootstage activity. The end will be marked later with * bootstage_accum() and at that point we accumulate the time taken. Calling * this function turns the given id into a accumulator rather than and @@ -315,11 +339,22 @@ int bootstage_stash(void *base, int size); int bootstage_unstash(void *base, int size); #else +static inline ulong bootstage_add_record(enum bootstage_id id, + const char *name, int flags, ulong mark) +{ + return 0; +} + /* * This is a dummy implementation which just calls show_boot_progress(), * and won't even do that unless CONFIG_SHOW_BOOT_PROGRESS is defined */ +static inline int bootstage_relocate(void) +{ + return 0; +} + static inline ulong bootstage_mark(enum bootstage_id id) { show_boot_progress(id); @@ -337,6 +372,22 @@ static inline ulong bootstage_mark_name(enum bootstage_id id, const char *name) return 0; } +static inline ulong bootstage_mark_code(const char *file, const char *func, + int linenum) +{ + return 0; +} + +static inline uint32_t bootstage_start(enum bootstage_id id, const char *name) +{ + return 0; +} + +static inline uint32_t bootstage_accum(enum bootstage_id id) +{ + return 0; +} + static inline int bootstage_stash(void *base, int size) { return 0; /* Pretend to succeed */ @@ -348,4 +399,8 @@ static inline int bootstage_unstash(void *base, int size) } #endif /* CONFIG_BOOTSTAGE */ +/* Helper macro for adding a bootstage to a line of code */ +#define BOOTSTAGE_MARKER() \ + bootstage_mark_code(__FILE__, __func__, __LINE__) + #endif diff --git a/include/common.h b/include/common.h index 8a1f3e406d..e682bd8237 100644 --- a/include/common.h +++ b/include/common.h @@ -71,8 +71,6 @@ typedef volatile unsigned char vu_char; #include <mpc5xxx.h> #elif defined(CONFIG_MPC512X) #include <asm/immap_512x.h> -#elif defined(CONFIG_MPC8220) -#include <asm/immap_8220.h> #elif defined(CONFIG_8260) #if defined(CONFIG_MPC8247) \ || defined(CONFIG_MPC8248) \ @@ -199,18 +197,35 @@ typedef void (interrupt_handler_t)(void *); * General Purpose Utilities */ #define min(X, Y) \ - ({ typeof (X) __x = (X); \ - typeof (Y) __y = (Y); \ + ({ typeof(X) __x = (X); \ + typeof(Y) __y = (Y); \ (__x < __y) ? __x : __y; }) #define max(X, Y) \ - ({ typeof (X) __x = (X); \ - typeof (Y) __y = (Y); \ + ({ typeof(X) __x = (X); \ + typeof(Y) __y = (Y); \ (__x > __y) ? __x : __y; }) #define MIN(x, y) min(x, y) #define MAX(x, y) max(x, y) +#define min3(X, Y, Z) \ + ({ typeof(X) __x = (X); \ + typeof(Y) __y = (Y); \ + typeof(Z) __z = (Z); \ + __x < __y ? (__x < __z ? __x : __z) : \ + (__y < __z ? __y : __z); }) + +#define max3(X, Y, Z) \ + ({ typeof(X) __x = (X); \ + typeof(Y) __y = (Y); \ + typeof(Z) __z = (Z); \ + __x > __y ? (__x > __z ? __x : __z) : \ + (__y > __z ? __y : __z); }) + +#define MIN3(x, y, z) min3(x, y, z) +#define MAX3(x, y, z) max3(x, y, z) + /* * Return the absolute value of a number. * @@ -323,6 +338,16 @@ int update_flash_size(int flash_size); */ void board_show_dram(ulong size); +/** + * arch_fixup_memory_node() - Write arch-specific memory information to fdt + * + * Defined in arch/$(ARCH)/lib/bootm.c + * + * @blob: FDT blob to write to + * @return 0 if ok, or -ve FDT_ERR_... on failure + */ +int arch_fixup_memory_node(void *blob); + /* common/flash.c */ void flash_perror (int); @@ -556,7 +581,6 @@ void trap_init (ulong); defined (CONFIG_74x) || \ defined (CONFIG_75x) || \ defined (CONFIG_74xx) || \ - defined (CONFIG_MPC8220) || \ defined (CONFIG_MPC85xx) || \ defined (CONFIG_MPC86xx) || \ defined (CONFIG_MPC83xx) @@ -648,9 +672,6 @@ int prt_8260_clks (void); #elif defined(CONFIG_MPC5xxx) int prt_mpc5xxx_clks (void); #endif -#if defined(CONFIG_MPC8220) -int prt_mpc8220_clks (void); -#endif #ifdef CONFIG_4xx ulong get_OPB_freq (void); ulong get_PCI_freq (void); diff --git a/include/configs/Alaska8220.h b/include/configs/Alaska8220.h deleted file mode 100644 index 39c29ecc22..0000000000 --- a/include/configs/Alaska8220.h +++ /dev/null @@ -1,334 +0,0 @@ -/* - * (C) Copyright 2004 - * TsiChung Liew, Freescale Software Engineering, Tsi-Chung.Liew@freescale. - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - -#ifndef __CONFIG_H -#define __CONFIG_H - -/* - * High Level Configuration Options - * (easy to change) - */ -#define CONFIG_MPC8220 1 -#define CONFIG_ALASKA8220 1 /* ... on Alaska board */ - -#define CONFIG_SYS_TEXT_BASE 0xfff00000 - -#define CONFIG_BAT_RW 1 /* Use common BAT rw code */ -#define CONFIG_HIGH_BATS 1 /* High BATs supported */ - -/* Input clock running at 30Mhz, read Hid1 for the CPU multiplier to - determine the CPU speed. */ -#define CONFIG_SYS_MPC8220_CLKIN 30000000/* ... running at 30MHz */ -#define CONFIG_SYS_MPC8220_SYSPLL_VCO_MULTIPLIER 16 /* VCO multiplier can't be read from any register */ - -/* - * Serial console configuration - */ - -/* Define this for PSC console -#define CONFIG_PSC_CONSOLE 1 -*/ - -#define CONFIG_EXTUART_CONSOLE 1 - -#ifdef CONFIG_EXTUART_CONSOLE -# define CONFIG_CONS_INDEX 1 -# define CONFIG_SYS_NS16550_SERIAL -# define CONFIG_SYS_NS16550 -# define CONFIG_SYS_NS16550_REG_SIZE 1 -# define CONFIG_SYS_NS16550_COM1 (CONFIG_SYS_CPLD_BASE + 0x1008) -# define CONFIG_SYS_NS16550_CLK 18432000 -#endif - -#define CONFIG_BAUDRATE 115200 /* ... at 115200 bps */ - -#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200, 230400 } - -#define CONFIG_TIMESTAMP /* Print image info with timestamp */ - - -/* - * BOOTP options - */ -#define CONFIG_BOOTP_BOOTFILESIZE -#define CONFIG_BOOTP_BOOTPATH -#define CONFIG_BOOTP_GATEWAY -#define CONFIG_BOOTP_HOSTNAME - - -/* - * Command line configuration. - */ -#include <config_cmd_default.h> - -#define CONFIG_CMD_BOOTD -#define CONFIG_CMD_CACHE -#define CONFIG_CMD_DHCP -#define CONFIG_CMD_DIAG -#define CONFIG_CMD_EEPROM -#define CONFIG_CMD_ELF -#define CONFIG_CMD_I2C -#define CONFIG_CMD_NET -#define CONFIG_CMD_NFS -#define CONFIG_CMD_PCI -#define CONFIG_CMD_PING -#define CONFIG_CMD_REGINFO -#define CONFIG_CMD_SDRAM -#define CONFIG_CMD_SNTP - - -#define CONFIG_MII - -/* - * Autobooting - */ -#define CONFIG_BOOTDELAY 5 /* autoboot after 5 seconds */ -#define CONFIG_BOOTARGS "root=/dev/ram rw" -#define CONFIG_ETHADDR 00:e0:0c:bc:e0:60 -#define CONFIG_HAS_ETH1 -#define CONFIG_ETH1ADDR 00:e0:0c:bc:e0:61 -#define CONFIG_IPADDR 192.162.1.2 -#define CONFIG_NETMASK 255.255.255.0 -#define CONFIG_SERVERIP 192.162.1.1 -#define CONFIG_GATEWAYIP 192.162.1.1 -#define CONFIG_HOSTNAME Alaska -#define CONFIG_OVERWRITE_ETHADDR_ONCE - - -/* - * I2C configuration - */ -#define CONFIG_HARD_I2C 1 -#define CONFIG_SYS_I2C_MODULE 1 - -#define CONFIG_SYS_I2C_SPEED 100000 /* 100 kHz */ -#define CONFIG_SYS_I2C_SLAVE 0x7F - -/* - * EEPROM configuration - */ -#define CONFIG_SYS_I2C_EEPROM_ADDR 0x52 /* 1011000xb */ -#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 1 -#define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS 3 -#define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS 70 -/* -#define CONFIG_ENV_IS_IN_EEPROM 1 -#define CONFIG_ENV_OFFSET 0 -#define CONFIG_ENV_SIZE 256 -*/ - -/* If CONFIG_SYS_AMD_BOOT is defined, the the system will boot from AMD. - else undefined it will boot from Intel Strata flash */ -#define CONFIG_SYS_AMD_BOOT 1 - -/* - * Flexbus Chipselect configuration - */ -#if defined (CONFIG_SYS_AMD_BOOT) -#define CONFIG_SYS_CS0_BASE 0xfff0 -#define CONFIG_SYS_CS0_MASK 0x00080000 /* 512 KB */ -#define CONFIG_SYS_CS0_CTRL 0x003f0d40 - -#define CONFIG_SYS_CS1_BASE 0xfe00 -#define CONFIG_SYS_CS1_MASK 0x01000000 /* 16 MB */ -#define CONFIG_SYS_CS1_CTRL 0x003f1540 -#else -#define CONFIG_SYS_CS0_BASE 0xff00 -#define CONFIG_SYS_CS0_MASK 0x01000000 /* 16 MB */ -#define CONFIG_SYS_CS0_CTRL 0x003f1540 - -#define CONFIG_SYS_CS1_BASE 0xfe08 -#define CONFIG_SYS_CS1_MASK 0x00080000 /* 512 KB */ -#define CONFIG_SYS_CS1_CTRL 0x003f0d40 -#endif - -#define CONFIG_SYS_CS2_BASE 0xf100 -#define CONFIG_SYS_CS2_MASK 0x00040000 -#define CONFIG_SYS_CS2_CTRL 0x003f1140 - -#define CONFIG_SYS_CS3_BASE 0xf200 -#define CONFIG_SYS_CS3_MASK 0x00040000 -#define CONFIG_SYS_CS3_CTRL 0x003f1100 - - -#define CONFIG_SYS_FLASH0_BASE (CONFIG_SYS_CS0_BASE << 16) -#define CONFIG_SYS_FLASH1_BASE (CONFIG_SYS_CS1_BASE << 16) - -#if defined (CONFIG_SYS_AMD_BOOT) -#define CONFIG_SYS_AMD_BASE CONFIG_SYS_FLASH0_BASE -#define CONFIG_SYS_INTEL_BASE CONFIG_SYS_FLASH1_BASE + 0xf00000 -#define CONFIG_SYS_FLASH_BASE CONFIG_SYS_AMD_BASE -#else -#define CONFIG_SYS_INTEL_BASE CONFIG_SYS_FLASH0_BASE + 0xf00000 -#define CONFIG_SYS_AMD_BASE CONFIG_SYS_FLASH1_BASE -#define CONFIG_SYS_FLASH_BASE CONFIG_SYS_INTEL_BASE -#endif - -#define CONFIG_SYS_CPLD_BASE (CONFIG_SYS_CS2_BASE << 16) -#define CONFIG_SYS_FPGA_BASE (CONFIG_SYS_CS3_BASE << 16) - - -#define CONFIG_SYS_MAX_FLASH_BANKS 4 /* max num of memory banks */ -#define CONFIG_SYS_MAX_FLASH_SECT 128 /* max num of sects on one chip */ - -#define CONFIG_SYS_FLASH_ERASE_TOUT 240000 /* Flash Erase Timeout (in ms) */ -#define CONFIG_SYS_FLASH_WRITE_TOUT 500 /* Flash Write Timeout (in ms) */ -#define CONFIG_SYS_FLASH_LOCK_TOUT 5 /* Timeout for Flash Set Lock Bit (in ms) */ -#define CONFIG_SYS_FLASH_UNLOCK_TOUT 10000 /* Timeout for Flash Clear Lock Bits (in ms) */ -#define CONFIG_SYS_FLASH_PROTECTION /* "Real" (hardware) sectors protection */ - -#define PHYS_AMD_SECT_SIZE 0x00010000 /* 64 KB sectors (x2) */ -#define PHYS_INTEL_SECT_SIZE 0x00020000 /* 128 KB sectors (x2) */ - -#define CONFIG_SYS_FLASH_CHECKSUM -/* - * Environment settings - */ -#define CONFIG_ENV_IS_IN_FLASH 1 -#if defined (CONFIG_SYS_AMD_BOOT) -#define CONFIG_ENV_ADDR (CONFIG_SYS_FLASH0_BASE + CONFIG_SYS_CS0_MASK - PHYS_AMD_SECT_SIZE) -#define CONFIG_ENV_SIZE PHYS_AMD_SECT_SIZE -#define CONFIG_ENV_SECT_SIZE PHYS_AMD_SECT_SIZE -#define CONFIG_ENV1_ADDR (CONFIG_SYS_FLASH1_BASE + CONFIG_SYS_CS1_MASK - PHYS_INTEL_SECT_SIZE) -#define CONFIG_ENV1_SIZE PHYS_INTEL_SECT_SIZE -#define CONFIG_ENV1_SECT_SIZE PHYS_INTEL_SECT_SIZE -#else -#define CONFIG_ENV_ADDR (CONFIG_SYS_FLASH0_BASE + CONFIG_SYS_CS0_MASK - PHYS_INTEL_SECT_SIZE) -#define CONFIG_ENV_SIZE PHYS_INTEL_SECT_SIZE -#define CONFIG_ENV_SECT_SIZE PHYS_INTEL_SECT_SIZE -#define CONFIG_ENV1_ADDR (CONFIG_SYS_FLASH1_BASE + CONFIG_SYS_CS1_MASK - PHYS_AMD_SECT_SIZE) -#define CONFIG_ENV1_SIZE PHYS_AMD_SECT_SIZE -#define CONFIG_ENV1_SECT_SIZE PHYS_AMD_SECT_SIZE -#endif - -#define CONFIG_ENV_OVERWRITE 1 - -#if defined CONFIG_ENV_IS_IN_FLASH -#undef CONFIG_ENV_IS_IN_NVRAM -#undef CONFIG_ENV_IS_IN_EEPROM -#elif defined CONFIG_ENV_IS_IN_NVRAM -#undef CONFIG_ENV_IS_IN_FLASH -#undef CONFIG_ENV_IS_IN_EEPROM -#elif defined CONFIG_ENV_IS_IN_EEPROM -#undef CONFIG_ENV_IS_IN_NVRAM -#undef CONFIG_ENV_IS_IN_FLASH -#endif - -/* - * Memory map - */ -#define CONFIG_SYS_MBAR 0xF0000000 -#define CONFIG_SYS_SDRAM_BASE 0x00000000 -#define CONFIG_SYS_DEFAULT_MBAR 0x80000000 -#define CONFIG_SYS_SRAM_BASE (CONFIG_SYS_MBAR + 0x20000) -#define CONFIG_SYS_SRAM_SIZE 0x8000 - -/* Use SRAM until RAM will be available */ -#define CONFIG_SYS_INIT_RAM_ADDR (CONFIG_SYS_MBAR + 0x20000) -#define CONFIG_SYS_INIT_RAM_SIZE 0x8000 /* Size of used area in DPRAM */ - -#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) -#define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET - -#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE -#if (CONFIG_SYS_MONITOR_BASE < CONFIG_SYS_FLASH_BASE) -# define CONFIG_SYS_RAMBOOT 1 -#endif - -#define CONFIG_SYS_MONITOR_LEN (256 << 10) /* Reserve 256 kB for Monitor */ -#define CONFIG_SYS_MALLOC_LEN (128 << 10) /* Reserve 128 kB for malloc() */ -#define CONFIG_SYS_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux */ - -/* SDRAM configuration */ -#define CONFIG_SYS_SDRAM_TOTAL_BANKS 2 -#define CONFIG_SYS_SDRAM_SPD_I2C_ADDR 0x51 /* 7bit */ -#define CONFIG_SYS_SDRAM_SPD_SIZE 0x40 -#define CONFIG_SYS_SDRAM_CAS_LATENCY 4 /* (CL=2)x2 */ - -/* SDRAM drive strength register */ -#define CONFIG_SYS_SDRAM_DRIVE_STRENGTH ((DRIVE_STRENGTH_LOW << SDRAMDS_SBE_SHIFT) | \ - (DRIVE_STRENGTH_HIGH << SDRAMDS_SBC_SHIFT) | \ - (DRIVE_STRENGTH_LOW << SDRAMDS_SBA_SHIFT) | \ - (DRIVE_STRENGTH_OFF << SDRAMDS_SBS_SHIFT) | \ - (DRIVE_STRENGTH_LOW << SDRAMDS_SBD_SHIFT)) - -/* - * Ethernet configuration - */ -#define CONFIG_MPC8220_FEC 1 -#define CONFIG_FEC_10MBIT 1 /* Workaround for FEC 100Mbit problem */ -#define CONFIG_PHY_ADDR 0x18 - - -/* - * Miscellaneous configurable options - */ -#define CONFIG_SYS_LONGHELP /* undef to save memory */ -#define CONFIG_SYS_PROMPT "=> " /* Monitor Command Prompt */ -#if defined(CONFIG_CMD_KGDB) -#define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */ -#else -#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */ -#endif -#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */ -#define CONFIG_SYS_MAXARGS 16 /* max number of command args */ -#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */ - -#define CONFIG_SYS_MEMTEST_START 0x00100000 /* memtest works on */ -#define CONFIG_SYS_MEMTEST_END 0x00f00000 /* 1 ... 15 MB in DRAM */ - -#define CONFIG_SYS_LOAD_ADDR 0x100000 /* default load address */ - -#define CONFIG_SYS_HZ 1000 /* decrementer freq: 1 ms ticks */ - -#define CONFIG_SYS_CACHELINE_SIZE 32 /* For MPC8220 CPUs */ -#if defined(CONFIG_CMD_KGDB) -# define CONFIG_SYS_CACHELINE_SHIFT 5 /* log base 2 of the above value */ -#endif - -/* - * Various low-level settings - */ -#define CONFIG_SYS_HID0_INIT HID0_ICE | HID0_ICFI -#define CONFIG_SYS_HID0_FINAL HID0_ICE - -/* - * JFFS2 partitions - */ - -/* No command line, one static partition */ -/* -#undef CONFIG_CMD_MTDPARTS -#define CONFIG_JFFS2_DEV "nor0" -#define CONFIG_JFFS2_PART_SIZE 0x00400000 -#define CONFIG_JFFS2_PART_OFFSET 0x00000000 -*/ - -/* mtdparts command line support */ -/* -#define CONFIG_CMD_MTDPARTS -#define MTDIDS_DEFAULT "nor0=alaska-0" -#define MTDPARTS_DEFAULT "mtdparts=alaska-0:4m(user)" -*/ - -#endif /* __CONFIG_H */ diff --git a/include/configs/B4860QDS.h b/include/configs/B4860QDS.h index b09119a2f2..1c9d08e256 100644 --- a/include/configs/B4860QDS.h +++ b/include/configs/B4860QDS.h @@ -36,7 +36,6 @@ /* High Level Configuration Options */ #define CONFIG_BOOKE -#define CONFIG_E6500 #define CONFIG_E500 /* BOOKE e500 family */ #define CONFIG_E500MC /* BOOKE e500mc family */ #define CONFIG_SYS_BOOK3E_HV /* Category E.HV supported */ @@ -528,6 +527,15 @@ unsigned long get_board_ddr_clk(void); #define CONFIG_SF_DEFAULT_MODE 0 /* + * MAPLE + */ +#ifdef CONFIG_PHYS_64BIT +#define CONFIG_SYS_MAPLE_MEM_PHYS 0xFA0000000ull +#else +#define CONFIG_SYS_MAPLE_MEM_PHYS 0xA0000000 +#endif + +/* * General PCI * Memory space is mapped 1-1, but I/O space must start from 0. */ @@ -623,7 +631,11 @@ unsigned long get_board_ddr_clk(void); #ifdef CONFIG_FMAN_ENET #define CONFIG_SYS_FM1_DTSEC5_PHY_ADDR 0x10 #define CONFIG_SYS_FM1_DTSEC6_PHY_ADDR 0x11 -#define CONFIG_SYS_FM1_10GEC1_PHY_ADDR 4 + +/*B4860 QDS AMC2PEX-2S default PHY_ADDR */ +#define CONFIG_SYS_FM1_10GEC1_PHY_ADDR 0x7 /*SLOT 1*/ +#define CONFIG_SYS_FM1_10GEC2_PHY_ADDR 0x6 /*SLOT 2*/ + #define CONFIG_SYS_FM1_DTSEC1_RISER_PHY_ADDR 0x1c #define CONFIG_SYS_FM1_DTSEC2_RISER_PHY_ADDR 0x1d diff --git a/include/configs/T4240QDS.h b/include/configs/T4240QDS.h index 76b3ca6898..6dd5c0d53a 100644 --- a/include/configs/T4240QDS.h +++ b/include/configs/T4240QDS.h @@ -25,7 +25,6 @@ */ #define CONFIG_T4240QDS #define CONFIG_PHYS_64BIT -#define CONFIG_PPC_T4240 #define CONFIG_FSL_SATA_V2 #define CONFIG_PCIE4 diff --git a/include/configs/Yukon8220.h b/include/configs/Yukon8220.h deleted file mode 100644 index 5f925b328c..0000000000 --- a/include/configs/Yukon8220.h +++ /dev/null @@ -1,326 +0,0 @@ -/* - * (C) Copyright 2004 - * TsiChung Liew, Freescale Software Engineering, Tsi-Chung.Liew@freescale. - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - -#ifndef __CONFIG_H -#define __CONFIG_H - -/* - * High Level Configuration Options - * (easy to change) - */ -#define CONFIG_MPC8220 1 -#define CONFIG_YUKON8220 1 /* ... on Yukon board */ - -#define CONFIG_SYS_TEXT_BASE 0xfff00000 - -#define CONFIG_BAT_RW 1 /* Use common BAT rw code */ -#define CONFIG_HIGH_BATS 1 /* High BATs supported */ - -/* Input clock running at 30Mhz, read Hid1 for the CPU multiplier to - determine the CPU speed. */ -#define CONFIG_SYS_MPC8220_CLKIN 30000000/* ... running at 30MHz */ -#define CONFIG_SYS_MPC8220_SYSPLL_VCO_MULTIPLIER 16 /* VCO multiplier can't be read from any register */ - -/* - * Serial console configuration - */ - -/* Define this for PSC console -#define CONFIG_PSC_CONSOLE 1 -*/ - -#define CONFIG_EXTUART_CONSOLE 1 - -#ifdef CONFIG_EXTUART_CONSOLE -# define CONFIG_CONS_INDEX 1 -# define CONFIG_SYS_NS16550_SERIAL -# define CONFIG_SYS_NS16550 -# define CONFIG_SYS_NS16550_REG_SIZE 1 -# define CONFIG_SYS_NS16550_COM1 (CONFIG_SYS_CPLD_BASE + 0x1008) -# define CONFIG_SYS_NS16550_CLK 18432000 -#endif - -#define CONFIG_BAUDRATE 115200 /* ... at 115200 bps */ - -#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200, 230400 } - -#define CONFIG_TIMESTAMP /* Print image info with timestamp */ - - -/* - * BOOTP options - */ -#define CONFIG_BOOTP_BOOTFILESIZE -#define CONFIG_BOOTP_BOOTPATH -#define CONFIG_BOOTP_GATEWAY -#define CONFIG_BOOTP_HOSTNAME - - -/* - * Command line configuration. - */ -#include <config_cmd_default.h> - -#define CONFIG_CMD_BOOTD -#define CONFIG_CMD_CACHE -#define CONFIG_CMD_DHCP -#define CONFIG_CMD_DIAG -#define CONFIG_CMD_EEPROM -#define CONFIG_CMD_ELF -#define CONFIG_CMD_I2C -#define CONFIG_CMD_NET -#define CONFIG_CMD_NFS -#define CONFIG_CMD_PCI -#define CONFIG_CMD_PING -#define CONFIG_CMD_REGINFO -#define CONFIG_CMD_SDRAM -#define CONFIG_CMD_SNTP - - -#define CONFIG_MII - -/* - * Autobooting - */ -#define CONFIG_BOOTDELAY 5 /* autoboot after 5 seconds */ -#define CONFIG_BOOTARGS "root=/dev/ram rw" -#define CONFIG_ETHADDR 00:e0:0c:bc:e0:60 -#define CONFIG_HAS_ETH1 -#define CONFIG_ETH1ADDR 00:e0:0c:bc:e0:61 -#define CONFIG_IPADDR 192.162.1.2 -#define CONFIG_NETMASK 255.255.255.0 -#define CONFIG_SERVERIP 192.162.1.1 -#define CONFIG_GATEWAYIP 192.162.1.1 -#define CONFIG_HOSTNAME yukon -#define CONFIG_OVERWRITE_ETHADDR_ONCE - - -/* - * I2C configuration - */ -#define CONFIG_HARD_I2C 1 -#define CONFIG_SYS_I2C_MODULE 1 - -#define CONFIG_SYS_I2C_SPEED 100000 /* 100 kHz */ -#define CONFIG_SYS_I2C_SLAVE 0x7F - -/* - * EEPROM configuration - */ -#define CONFIG_SYS_I2C_EEPROM_ADDR 0x52 /* 1011000xb */ -#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 1 -#define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS 3 -#define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS 70 -/* -#define CONFIG_ENV_IS_IN_EEPROM 1 -#define CONFIG_ENV_OFFSET 0 -#define CONFIG_ENV_SIZE 256 -*/ - -/* If CONFIG_SYS_AMD_BOOT is defined, the the system will boot from AMD. - else undefined it will boot from Intel Strata flash */ -#define CONFIG_SYS_AMD_BOOT 1 - -/* - * Flexbus Chipselect configuration - */ -#if defined (CONFIG_SYS_AMD_BOOT) -#define CONFIG_SYS_CS0_BASE 0xfff0 -#define CONFIG_SYS_CS0_MASK 0x00080000 /* 512 KB */ -#define CONFIG_SYS_CS0_CTRL 0x003f0d40 - -#define CONFIG_SYS_CS1_BASE 0xfe00 -#define CONFIG_SYS_CS1_MASK 0x01000000 /* 16 MB */ -#define CONFIG_SYS_CS1_CTRL 0x003f1540 -#else -#define CONFIG_SYS_CS0_BASE 0xff00 -#define CONFIG_SYS_CS0_MASK 0x01000000 /* 16 MB */ -#define CONFIG_SYS_CS0_CTRL 0x003f1540 - -#define CONFIG_SYS_CS1_BASE 0xfe08 -#define CONFIG_SYS_CS1_MASK 0x00080000 /* 512 KB */ -#define CONFIG_SYS_CS1_CTRL 0x003f0d40 -#endif - -#define CONFIG_SYS_CS2_BASE 0xf100 -#define CONFIG_SYS_CS2_MASK 0x00040000 -#define CONFIG_SYS_CS2_CTRL 0x003f1140 - -#define CONFIG_SYS_CS3_BASE 0xf200 -#define CONFIG_SYS_CS3_MASK 0x00040000 -#define CONFIG_SYS_CS3_CTRL 0x003f1100 - - -#define CONFIG_SYS_FLASH0_BASE (CONFIG_SYS_CS0_BASE << 16) -#define CONFIG_SYS_FLASH1_BASE (CONFIG_SYS_CS1_BASE << 16) - -#if defined (CONFIG_SYS_AMD_BOOT) -#define CONFIG_SYS_AMD_BASE CONFIG_SYS_FLASH0_BASE -#define CONFIG_SYS_INTEL_BASE CONFIG_SYS_FLASH1_BASE + 0xf00000 -#define CONFIG_SYS_FLASH_BASE CONFIG_SYS_AMD_BASE -#else -#define CONFIG_SYS_INTEL_BASE CONFIG_SYS_FLASH0_BASE + 0xf00000 -#define CONFIG_SYS_AMD_BASE CONFIG_SYS_FLASH1_BASE -#define CONFIG_SYS_FLASH_BASE CONFIG_SYS_INTEL_BASE -#endif - -#define CONFIG_SYS_CPLD_BASE (CONFIG_SYS_CS2_BASE << 16) -#define CONFIG_SYS_FPGA_BASE (CONFIG_SYS_CS3_BASE << 16) - - -#define CONFIG_SYS_MAX_FLASH_BANKS 4 /* max num of memory banks */ -#define CONFIG_SYS_MAX_FLASH_SECT 128 /* max num of sects on one chip */ - -#define CONFIG_SYS_FLASH_ERASE_TOUT 240000 /* Flash Erase Timeout (in ms) */ -#define CONFIG_SYS_FLASH_WRITE_TOUT 500 /* Flash Write Timeout (in ms) */ -#define CONFIG_SYS_FLASH_LOCK_TOUT 5 /* Timeout for Flash Set Lock Bit (in ms) */ -#define CONFIG_SYS_FLASH_UNLOCK_TOUT 10000 /* Timeout for Flash Clear Lock Bits (in ms) */ -#define CONFIG_SYS_FLASH_PROTECTION /* "Real" (hardware) sectors protection */ - -#define PHYS_AMD_SECT_SIZE 0x00010000 /* 64 KB sectors (x2) */ -#define PHYS_INTEL_SECT_SIZE 0x00020000 /* 128 KB sectors (x2) */ - -#define CONFIG_SYS_FLASH_CHECKSUM -/* - * Environment settings - */ -#define CONFIG_ENV_IS_IN_FLASH 1 -#if defined (CONFIG_SYS_AMD_BOOT) -#define CONFIG_ENV_ADDR (CONFIG_SYS_FLASH0_BASE + CONFIG_SYS_CS0_MASK - PHYS_AMD_SECT_SIZE) -#define CONFIG_ENV_SIZE PHYS_AMD_SECT_SIZE -#define CONFIG_ENV_SECT_SIZE PHYS_AMD_SECT_SIZE -#define CONFIG_ENV1_ADDR (CONFIG_SYS_FLASH1_BASE + CONFIG_SYS_CS1_MASK - PHYS_INTEL_SECT_SIZE) -#define CONFIG_ENV1_SIZE PHYS_INTEL_SECT_SIZE -#define CONFIG_ENV1_SECT_SIZE PHYS_INTEL_SECT_SIZE -#else -#define CONFIG_ENV_ADDR (CONFIG_SYS_FLASH0_BASE + CONFIG_SYS_CS0_MASK - PHYS_INTEL_SECT_SIZE) -#define CONFIG_ENV_SIZE PHYS_INTEL_SECT_SIZE -#define CONFIG_ENV_SECT_SIZE PHYS_INTEL_SECT_SIZE -#define CONFIG_ENV1_ADDR (CONFIG_SYS_FLASH1_BASE + CONFIG_SYS_CS1_MASK - PHYS_AMD_SECT_SIZE) -#define CONFIG_ENV1_SIZE PHYS_AMD_SECT_SIZE -#define CONFIG_ENV1_SECT_SIZE PHYS_AMD_SECT_SIZE -#endif - -#define CONFIG_ENV_OVERWRITE 1 - -#if defined CONFIG_ENV_IS_IN_FLASH -#undef CONFIG_ENV_IS_IN_NVRAM -#undef CONFIG_ENV_IS_IN_EEPROM -#elif defined CONFIG_ENV_IS_IN_NVRAM -#undef CONFIG_ENV_IS_IN_FLASH -#undef CONFIG_ENV_IS_IN_EEPROM -#elif defined CONFIG_ENV_IS_IN_EEPROM -#undef CONFIG_ENV_IS_IN_NVRAM -#undef CONFIG_ENV_IS_IN_FLASH -#endif - -#ifndef CONFIG_SYS_JFFS2_FIRST_SECTOR -#define CONFIG_SYS_JFFS2_FIRST_SECTOR 0 -#endif -#ifndef CONFIG_SYS_JFFS2_FIRST_BANK -#define CONFIG_SYS_JFFS2_FIRST_BANK 0 -#endif -#ifndef CONFIG_SYS_JFFS2_NUM_BANKS -#define CONFIG_SYS_JFFS2_NUM_BANKS 1 -#endif -#define CONFIG_SYS_JFFS2_LAST_BANK (CONFIG_SYS_JFFS2_FIRST_BANK + CONFIG_SYS_JFFS2_NUM_BANKS - 1) - -/* - * Memory map - */ -#define CONFIG_SYS_MBAR 0xF0000000 -#define CONFIG_SYS_SDRAM_BASE 0x00000000 -#define CONFIG_SYS_DEFAULT_MBAR 0x80000000 -#define CONFIG_SYS_SRAM_BASE (CONFIG_SYS_MBAR + 0x20000) -#define CONFIG_SYS_SRAM_SIZE 0x8000 - -/* Use SRAM until RAM will be available */ -#define CONFIG_SYS_INIT_RAM_ADDR (CONFIG_SYS_MBAR + 0x20000) -#define CONFIG_SYS_INIT_RAM_SIZE 0x8000 /* Size of used area in DPRAM */ - -#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) -#define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET - -#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE -#if (CONFIG_SYS_MONITOR_BASE < CONFIG_SYS_FLASH_BASE) -# define CONFIG_SYS_RAMBOOT 1 -#endif - -#define CONFIG_SYS_MONITOR_LEN (256 << 10) /* Reserve 256 kB for Monitor */ -#define CONFIG_SYS_MALLOC_LEN (128 << 10) /* Reserve 128 kB for malloc() */ -#define CONFIG_SYS_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux */ - -/* SDRAM configuration */ -#define CONFIG_SYS_SDRAM_TOTAL_BANKS 2 -#define CONFIG_SYS_SDRAM_SPD_I2C_ADDR 0x51 /* 7bit */ -#define CONFIG_SYS_SDRAM_SPD_SIZE 0x40 -#define CONFIG_SYS_SDRAM_CAS_LATENCY 4 /* (CL=2)x2 */ - -/* SDRAM drive strength register */ -#define CONFIG_SYS_SDRAM_DRIVE_STRENGTH ((DRIVE_STRENGTH_LOW << SDRAMDS_SBE_SHIFT) | \ - (DRIVE_STRENGTH_HIGH << SDRAMDS_SBC_SHIFT) | \ - (DRIVE_STRENGTH_LOW << SDRAMDS_SBA_SHIFT) | \ - (DRIVE_STRENGTH_OFF << SDRAMDS_SBS_SHIFT) | \ - (DRIVE_STRENGTH_LOW << SDRAMDS_SBD_SHIFT)) - -/* - * Ethernet configuration - */ -#define CONFIG_MPC8220_FEC 1 -#define CONFIG_FEC_10MBIT 1 /* Workaround for FEC 100Mbit problem */ -#define CONFIG_PHY_ADDR 0x18 - - -/* - * Miscellaneous configurable options - */ -#define CONFIG_SYS_LONGHELP /* undef to save memory */ -#define CONFIG_SYS_PROMPT "=> " /* Monitor Command Prompt */ -#if defined(CONFIG_CMD_KGDB) -#define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */ -#else -#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */ -#endif -#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */ -#define CONFIG_SYS_MAXARGS 16 /* max number of command args */ -#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */ - -#define CONFIG_SYS_MEMTEST_START 0x00100000 /* memtest works on */ -#define CONFIG_SYS_MEMTEST_END 0x00f00000 /* 1 ... 15 MB in DRAM */ - -#define CONFIG_SYS_LOAD_ADDR 0x100000 /* default load address */ - -#define CONFIG_SYS_HZ 1000 /* decrementer freq: 1 ms ticks */ - -#define CONFIG_SYS_CACHELINE_SIZE 32 /* For MPC8220 CPUs */ -#if defined(CONFIG_CMD_KGDB) -# define CONFIG_SYS_CACHELINE_SHIFT 5 /* log base 2 of the above value */ -#endif - -/* - * Various low-level settings - */ -#define CONFIG_SYS_HID0_INIT HID0_ICE | HID0_ICFI -#define CONFIG_SYS_HID0_FINAL HID0_ICE - -#endif /* __CONFIG_H */ diff --git a/include/configs/bf527-ezkit.h b/include/configs/bf527-ezkit.h index 7b51b53dc5..db1b6136f3 100644 --- a/include/configs/bf527-ezkit.h +++ b/include/configs/bf527-ezkit.h @@ -149,10 +149,15 @@ #define CONFIG_MUSB_TIMEOUT 100000 #endif +/* Don't waste time transferring a logo over the UART */ +#if (CONFIG_BFIN_BOOT_MODE != BFIN_BOOT_UART) +/*# define CONFIG_VIDEO*/ +#endif /* * Video Settings */ +#ifdef CONFIG_VIDEO #ifdef CONFIG_BF527_EZKIT_REV_2_1 # define CONFIG_LQ035Q1_SPI_BUS 0 # define CONFIG_LQ035Q1_SPI_CS 7 @@ -166,7 +171,7 @@ #else # define EASYLOGO_HEADER <asm/bfin_logo_230x230_lzma.h> #endif - +#endif /* CONFIG_VIDEO */ /* * Misc Settings @@ -175,11 +180,6 @@ #define CONFIG_RTC_BFIN #define CONFIG_UART_CONSOLE 1 -/* Don't waste time transferring a logo over the UART */ -#if (CONFIG_BFIN_BOOT_MODE != BFIN_BOOT_UART) -# define CONFIG_VIDEO -#endif - /* * Pull in common ADI header for remaining command/environment setup diff --git a/include/configs/bf537-stamp.h b/include/configs/bf537-stamp.h index 05029d497b..25cebf880f 100644 --- a/include/configs/bf537-stamp.h +++ b/include/configs/bf537-stamp.h @@ -52,7 +52,7 @@ #define CONFIG_EBIU_AMBCTL0_VAL 0x7BB07BB0 #define CONFIG_EBIU_AMBCTL1_VAL 0xFFC27BB0 -#define CONFIG_SYS_MONITOR_LEN (512 * 1024) +#define CONFIG_SYS_MONITOR_LEN (768 * 1024) #define CONFIG_SYS_MALLOC_LEN (384 * 1024) @@ -135,15 +135,17 @@ /* * SPI_MMC Settings */ +#define CONFIG_MMC_SPI +#ifdef CONFIG_MMC_SPI #define CONFIG_MMC #define CONFIG_GENERIC_MMC -#define CONFIG_MMC_SPI - +#endif /* * NAND Settings */ /* #define CONFIG_NAND_PLAT */ +#ifdef CONFIG_NAND_PLAT #define CONFIG_SYS_NAND_BASE 0x20212000 #define CONFIG_SYS_MAX_NAND_DEVICE 1 @@ -158,7 +160,7 @@ #define NAND_PLAT_WRITE_CMD(chip, cmd) BFIN_NAND_WRITE(BFIN_NAND_CLE(chip), cmd) #define NAND_PLAT_WRITE_ADR(chip, cmd) BFIN_NAND_WRITE(BFIN_NAND_ALE(chip), cmd) #define NAND_PLAT_GPIO_DEV_READY GPIO_PF3 - +#endif /* CONFIG_NAND_PLAT */ /* * CF-CARD IDE-HDD Support diff --git a/include/configs/bf548-ezkit.h b/include/configs/bf548-ezkit.h index e6b05db09d..da5f029435 100644 --- a/include/configs/bf548-ezkit.h +++ b/include/configs/bf548-ezkit.h @@ -120,18 +120,16 @@ #define CONFIG_ENV_SECT_SIZE 0x8000 #endif - /* * NAND Settings */ -#define CONFIG_BFIN_NFC_CTL_VAL 0x0033 #if (CONFIG_BFIN_BOOT_MODE == BFIN_BOOT_NAND) -# define CONFIG_BFIN_NFC_BOOTROM_ECC -#endif +#define CONFIG_BFIN_NFC_CTL_VAL 0x0033 +#define CONFIG_BFIN_NFC_BOOTROM_ECC #define CONFIG_DRIVER_NAND_BFIN -#define CONFIG_SYS_NAND_BASE 0 /* not actually used */ -#define CONFIG_SYS_MAX_NAND_DEVICE 1 - +#define CONFIG_SYS_NAND_BASE 0 /* not actually used */ +#define CONFIG_SYS_MAX_NAND_DEVICE 1 +#endif /* * I2C Settings @@ -184,13 +182,12 @@ #define CONFIG_UART_CONSOLE 1 #define CONFIG_BFIN_SPI_IMG_SIZE 0x50000 -#ifndef __ADSPBF542__ -/* Don't waste time transferring a logo over the UART */ -# if (CONFIG_BFIN_BOOT_MODE != BFIN_BOOT_UART) -# define CONFIG_VIDEO -# define EASYLOGO_HEADER <asm/bfin_logo_230x230_gzip.h> -# endif -# define CONFIG_DEB_DMA_URGENT +#define CONFIG_ADI_GPIO2 + +#undef CONFIG_VIDEO +#ifdef CONFIG_VIDEO +#define EASYLOGO_HEADER < asm/bfin_logo_230x230_gzip.h > +#define CONFIG_DEB_DMA_URGENT #endif /* Define if want to do post memory test */ diff --git a/include/configs/bf561-ezkit.h b/include/configs/bf561-ezkit.h index 1a9d27ea2a..6ee1e4c869 100644 --- a/include/configs/bf561-ezkit.h +++ b/include/configs/bf561-ezkit.h @@ -98,6 +98,11 @@ */ #define CONFIG_UART_CONSOLE 0 +/* + * Run core 1 from L1 SRAM start address when init uboot on core 0 + */ +/* #define CONFIG_CORE1_RUN 1 */ + /* * Pull in common ADI header for remaining command/environment setup diff --git a/include/configs/bf609-ezkit.h b/include/configs/bf609-ezkit.h index 02149fa94d..1a43e1b433 100644 --- a/include/configs/bf609-ezkit.h +++ b/include/configs/bf609-ezkit.h @@ -144,10 +144,13 @@ #define CONFIG_UART_CONSOLE 0 #define CONFIG_CMD_MEMORY +#define CONFIG_CMD_SOFTSWITCH #define CONFIG_SYS_MEMTEST_END (CONFIG_STACKBASE - 20*1024*1024 + 4) #define CONFIG_BFIN_SOFT_SWITCH +#define CONFIG_ADI_GPIO2 + #if 0 #define CONFIG_UART_MEM 1024 #undef CONFIG_UART_CONSOLE @@ -155,6 +158,13 @@ #undef CONFIG_UART_CONSOLE_IS_JTAG #endif +#define CONFIG_BOARD_SIZE_LIMIT $$((512 * 1024)) + +/* + * Run core 1 from L1 SRAM start address when init uboot on core 0 + */ +/* #define CONFIG_CORE1_RUN 1 */ + /* * Pull in common ADI header for remaining command/environment setup */ diff --git a/include/configs/bfin_adi_common.h b/include/configs/bfin_adi_common.h index d3ae3a71cd..e1a6fe3056 100644 --- a/include/configs/bfin_adi_common.h +++ b/include/configs/bfin_adi_common.h @@ -111,8 +111,8 @@ #ifndef CONFIG_BAUDRATE # define CONFIG_BAUDRATE 57600 #endif -#ifndef CONFIG_DEBUG_EARLY_SERIAL -# define CONFIG_SYS_BFIN_UART +#ifdef CONFIG_UART_CONSOLE +# define CONFIG_BFIN_SERIAL #endif /* @@ -317,5 +317,13 @@ #define CONFIG_BFIN_SPI_GPIO_CS /* Only matters if BFIN_SPI is enabled */ #define CONFIG_LZMA #define CONFIG_MONITOR_IS_IN_RAM - +#ifdef CONFIG_HW_WATCHDOG +# define CONFIG_BFIN_WATCHDOG +# ifndef CONFIG_WATCHDOG_TIMEOUT_MSECS +# define CONFIG_WATCHDOG_TIMEOUT_MSECS 5000 +# endif +#endif +#ifndef CONFIG_ADI_GPIO2 +# define CONFIG_ADI_GPIO1 +#endif #endif diff --git a/include/configs/coreboot.h b/include/configs/coreboot.h index 5bacc77bb5..be04a7548a 100644 --- a/include/configs/coreboot.h +++ b/include/configs/coreboot.h @@ -38,7 +38,6 @@ #define CONFIG_SHOW_BOOT_PROGRESS #define CONFIG_LAST_STAGE_INIT #define CONFIG_SYS_VSNPRINTF -#define CONFIG_INTEL_CORE_ARCH /* Sandy bridge and ivy bridge chipsets. */ #define CONFIG_ZBOOT_32 #define CONFIG_PHYSMEM #define CONFIG_SYS_EARLY_PCI_INIT @@ -49,6 +48,19 @@ #define CONFIG_OF_SEPARATE #define CONFIG_DEFAULT_DEVICE_TREE link +#define CONFIG_BOOTSTAGE +#define CONFIG_BOOTSTAGE_REPORT +#define CONFIG_BOOTSTAGE_FDT +#define CONFIG_CMD_BOOTSTAGE +/* Place to stash bootstage data from first-stage U-Boot */ +#define CONFIG_BOOTSTAGE_STASH 0x0110f000 +#define CONFIG_BOOTSTAGE_STASH_SIZE 0x7fc +#define CONFIG_BOOTSTAGE_USER_COUNT 60 + +#define CONFIG_LZO +#undef CONFIG_ZLIB +#undef CONFIG_GZIP + /*----------------------------------------------------------------------- * Watchdog Configuration */ @@ -218,7 +230,6 @@ #define CONFIG_SYS_MEMTEST_END 0x01000000 #define CONFIG_SYS_LOAD_ADDR 0x100000 #define CONFIG_SYS_HZ 1000 -#define CONFIG_SYS_X86_ISR_TIMER /*----------------------------------------------------------------------- * SDRAM Configuration @@ -235,8 +246,9 @@ * CPU Features */ -#define CONFIG_SYS_GENERIC_TIMER +#define CONFIG_SYS_X86_TSC_TIMER #define CONFIG_SYS_PCAT_INTERRUPTS +#define CONFIG_SYS_PCAT_TIMER #define CONFIG_SYS_NUM_IRQS 16 /*----------------------------------------------------------------------- diff --git a/include/configs/corenet_ds.h b/include/configs/corenet_ds.h index 5cc9b5ab26..2e2d439678 100644 --- a/include/configs/corenet_ds.h +++ b/include/configs/corenet_ds.h @@ -38,6 +38,8 @@ #define CONFIG_PBLRCW_CONFIG $(SRCTREE)/board/freescale/corenet_ds/rcw_p4080ds.cfg #elif defined(CONFIG_P5020DS) #define CONFIG_PBLRCW_CONFIG $(SRCTREE)/board/freescale/corenet_ds/rcw_p5020ds.cfg +#elif defined(CONFIG_P5040DS) +#define CONFIG_PBLRCW_CONFIG $(SRCTREE)/board/freescale/corenet_ds/rcw_p5040ds.cfg #endif #endif diff --git a/include/configs/microblaze-generic.h b/include/configs/microblaze-generic.h index 0c4e7193ba..17f53baf90 100644 --- a/include/configs/microblaze-generic.h +++ b/include/configs/microblaze-generic.h @@ -104,7 +104,7 @@ /* gpio */ #ifdef XILINX_GPIO_BASEADDR -# define CONFIG_SYS_GPIO_0 1 +# define CONFIG_XILINX_GPIO # define CONFIG_SYS_GPIO_0_ADDR XILINX_GPIO_BASEADDR #endif @@ -312,6 +312,7 @@ #define CONFIG_CMD_IRQ #define CONFIG_CMD_MFSL #define CONFIG_CMD_ECHO +#define CONFIG_CMD_GPIO #if defined(CONFIG_DCACHE) || defined(CONFIG_ICACHE) # define CONFIG_CMD_CACHE diff --git a/include/configs/sorcery.h b/include/configs/sorcery.h deleted file mode 100644 index f67898e840..0000000000 --- a/include/configs/sorcery.h +++ /dev/null @@ -1,298 +0,0 @@ -/* - * (C) Copyright 2004 - * TsiChung Liew, Freescale Software Engineering, Tsi-Chung.Liew@freescale. - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - -#ifndef __CONFIG_H -#define __CONFIG_H - -/* - * High Level Configuration Options - * (easy to change) - */ -#define CONFIG_MPC8220 1 -#define CONFIG_SORCERY 1 /* Sorcery board */ - -#define CONFIG_SYS_TEXT_BASE 0xfff00000 - -#define CONFIG_HIGH_BATS 1 /* High BATs supported */ - -/* Input clock running at 60Mhz, read Hid1 for the CPU multiplier to - determine the CPU speed. */ -#define CONFIG_SYS_MPC8220_CLKIN 60000000 /* ... running at 60MHz */ -#define CONFIG_SYS_MPC8220_SYSPLL_VCO_MULTIPLIER 8 /* VCO multiplier can't be read from any register */ - -/* - * Serial console configuration - */ -#define CONFIG_PSC_CONSOLE 1 /* console is on PSC */ - -#define CONFIG_BAUDRATE 115200 /* ... at 115200 bps */ -#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200, 230400 } - -/* PCI */ -#define CONFIG_PCI 1 -#define CONFIG_PCI_PNP 1 - -#define CONFIG_PCI_MEM_BUS 0x80000000 -#define CONFIG_PCI_MEM_PHYS CONFIG_PCI_MEM_BUS -#define CONFIG_PCI_MEM_SIZE 0x10000000 - -#define CONFIG_PCI_IO_BUS 0x71000000 -#define CONFIG_PCI_IO_PHYS CONFIG_PCI_IO_BUS -#define CONFIG_PCI_IO_SIZE 0x01000000 - -#define CONFIG_PCI_CFG_BUS 0x70000000 -#define CONFIG_PCI_CFG_PHYS CONFIG_PCI_CFG_BUS -#define CONFIG_PCI_CFG_SIZE 0x01000000 - - -/* - * BOOTP options - */ -#define CONFIG_BOOTP_BOOTFILESIZE -#define CONFIG_BOOTP_BOOTPATH -#define CONFIG_BOOTP_GATEWAY -#define CONFIG_BOOTP_HOSTNAME - - -/* - * Command line configuration. - */ -#include <config_cmd_default.h> - -#define CONFIG_CMD_BOOTD -#define CONFIG_CMD_CACHE -#define CONFIG_CMD_DHCP -#define CONFIG_CMD_DIAG -#define CONFIG_CMD_ELF -#define CONFIG_CMD_I2C -#define CONFIG_CMD_NET -#define CONFIG_CMD_NFS -#define CONFIG_CMD_PCI -#define CONFIG_CMD_PING -#define CONFIG_CMD_REGINFO -#define CONFIG_CMD_SDRAM -#define CONFIG_CMD_SNTP - - -/* - * Default Environment - */ -#define CONFIG_BOOTDELAY 5 /* autoboot after 5 seconds */ -#define CONFIG_HOSTNAME sorcery - -#define CONFIG_PREBOOT "echo;" \ - "echo Type \\\"run flash_nfs\\\" to mount root filesystem over NFS;" \ - "echo" - -#undef CONFIG_BOOTARGS - -#define CONFIG_EXTRA_ENV_SETTINGS \ - "netdev=eth0\0" \ - "nfsargs=setenv bootargs root=/dev/nfs rw " \ - "nfsroot=$serverip:$rootpath\0" \ - "ramargs=setenv bootargs root=/dev/ram rw\0" \ - "addip=setenv bootargs $bootargs " \ - "ip=$ipaddr:$serverip:$gatewayip:$netmask" \ - ":$hostname:$netdev:off panic=1\0" \ - "flash_nfs=run nfsargs addip;" \ - "bootm $kernel_addr\0" \ - "flash_self=run ramargs addip;" \ - "bootm $kernel_addr $ramdisk_addr\0" \ - "net_nfs=tftp 200000 $bootfile;run nfsargs addip;bootm\0" \ - "rootpath=/opt/eldk/ppc_82xx\0" \ - "bootfile=/tftpboot/sorcery/uImage\0" \ - "kernel_addr=FFE00000\0" \ - "ramdisk_addr=FFB00000\0" \ - "" -#define CONFIG_BOOTCOMMAND "run flash_self" - -#define CONFIG_TIMESTAMP /* Print image info with timestamp */ - -#define CONFIG_EEPRO100 - -/* - * I2C configuration - */ -#define CONFIG_HARD_I2C 1 -#define CONFIG_SYS_I2C_MODULE 1 -#define CONFIG_SYS_I2C_SPEED 100000 /* 100 kHz */ -#define CONFIG_SYS_I2C_SLAVE 0x7F - -/* Use the HUSH parser */ -#define CONFIG_SYS_HUSH_PARSER - -/* - * Flexbus Chipselect configuration - * Beware: Some CS# seem to be mandatory (if these CS# are not set, - * board can hang-up in unpredictable place). - * Sorcery_Memory_Map v0.3 is possibly wrong with CPLD CS# - */ - -/* Flash */ -#define CONFIG_SYS_CS0_BASE 0xf800 -#define CONFIG_SYS_CS0_MASK 0x08000000 /* 128 MB (two chips) */ -#define CONFIG_SYS_CS0_CTRL 0x001019c0 - -/* NVM */ -#define CONFIG_SYS_CS1_BASE 0xf7e8 -#define CONFIG_SYS_CS1_MASK 0x00040000 /* 256K */ -#define CONFIG_SYS_CS1_CTRL 0x00101940 /* 8bit port size */ - -/* Atlas2 + Gemini */ -#define CONFIG_SYS_CS2_BASE 0xf7e7 -#define CONFIG_SYS_CS2_MASK 0x00010000 /* 64K*/ -#define CONFIG_SYS_CS2_CTRL 0x001011c0 /* 16bit port size */ - -/* CAN Controller */ -#define CONFIG_SYS_CS3_BASE 0xf7e6 -#define CONFIG_SYS_CS3_MASK 0x00010000 /* 64K */ -#define CONFIG_SYS_CS3_CTRL 0x00102140 /* 8Bit port size */ - -/* Foreign interface */ -#define CONFIG_SYS_CS4_BASE 0xf7e5 -#define CONFIG_SYS_CS4_MASK 0x00010000 /* 64K */ -#define CONFIG_SYS_CS4_CTRL 0x00101dc0 /* 16bit port size */ - -/* CPLD */ -#define CONFIG_SYS_CS5_BASE 0xf7e4 -#define CONFIG_SYS_CS5_MASK 0x00010000 /* 64K */ -#define CONFIG_SYS_CS5_CTRL 0x001000c0 /* 16bit port size */ - -#define CONFIG_SYS_FLASH0_BASE (CONFIG_SYS_CS0_BASE << 16) -#define CONFIG_SYS_FLASH_BASE (CONFIG_SYS_FLASH0_BASE) - -#define CONFIG_SYS_MAX_FLASH_BANKS 2 /* max num of flash banks */ -#define CONFIG_SYS_MAX_FLASH_SECT 512 /* max num of sects on one chip */ - -#define CONFIG_FLASH_CFI_DRIVER -#define CONFIG_SYS_FLASH_CFI -#define CONFIG_SYS_FLASH_BANKS_LIST { CONFIG_SYS_FLASH_BASE, \ - CONFIG_SYS_FLASH_BASE+0x04000000 } /* two banks */ - -/* - * Environment settings - */ -#define CONFIG_ENV_IS_IN_FLASH 1 -#define CONFIG_ENV_ADDR (CONFIG_SYS_FLASH_BASE + 0x8000000 - 0x40000) -#define CONFIG_ENV_SIZE 0x4000 /* 16K */ -#define CONFIG_ENV_SECT_SIZE 0x20000 -#define CONFIG_ENV_ADDR_REDUND (CONFIG_ENV_ADDR + 0x20000) -#define CONFIG_ENV_SIZE_REDUND CONFIG_ENV_SIZE - -#define CONFIG_ENV_OVERWRITE 1 - -#if defined CONFIG_ENV_IS_IN_FLASH -#undef CONFIG_ENV_IS_IN_NVRAM -#undef CONFIG_ENV_IS_IN_EEPROM -#elif defined CONFIG_ENV_IS_IN_NVRAM -#undef CONFIG_ENV_IS_IN_FLASH -#undef CONFIG_ENV_IS_IN_EEPROM -#elif defined CONFIG_ENV_IS_IN_EEPROM -#undef CONFIG_ENV_IS_IN_NVRAM -#undef CONFIG_ENV_IS_IN_FLASH -#endif - -/* - * Memory map - */ -#define CONFIG_SYS_MBAR 0xF0000000 -#define CONFIG_SYS_SDRAM_BASE 0x00000000 -#define CONFIG_SYS_DEFAULT_MBAR 0x80000000 -#define CONFIG_SYS_SRAM_BASE (CONFIG_SYS_MBAR + 0x20000) -#define CONFIG_SYS_SRAM_SIZE 0x8000 - -/* Use SRAM until RAM will be available */ -#define CONFIG_SYS_INIT_RAM_ADDR (CONFIG_SYS_MBAR + 0x20000) -#define CONFIG_SYS_INIT_RAM_SIZE 0x8000 /* Size of used area in DPRAM */ - -#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) -#define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET - -#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE -#if (CONFIG_SYS_MONITOR_BASE < CONFIG_SYS_FLASH_BASE) -# define CONFIG_SYS_RAMBOOT 1 -#endif - -#define CONFIG_SYS_MONITOR_LEN (256 << 10) /* Reserve 256 kB for Monitor */ -#define CONFIG_SYS_MALLOC_LEN (128 << 10) /* Reserve 128 kB for malloc() */ -#define CONFIG_SYS_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux */ - -/* SDRAM configuration (for SPD) */ -#define CONFIG_SYS_SDRAM_TOTAL_BANKS 1 -#define CONFIG_SYS_SDRAM_SPD_I2C_ADDR 0x50 /* 7bit */ -#define CONFIG_SYS_SDRAM_SPD_SIZE 0x100 -#define CONFIG_SYS_SDRAM_CAS_LATENCY 5 /* (CL=2.5)x2 */ - -/* SDRAM drive strength register (for SSTL_2 class II)*/ -#define CONFIG_SYS_SDRAM_DRIVE_STRENGTH ((DRIVE_STRENGTH_HIGH << SDRAMDS_SBE_SHIFT) | \ - (DRIVE_STRENGTH_HIGH << SDRAMDS_SBC_SHIFT) | \ - (DRIVE_STRENGTH_HIGH << SDRAMDS_SBA_SHIFT) | \ - (DRIVE_STRENGTH_HIGH << SDRAMDS_SBS_SHIFT) | \ - (DRIVE_STRENGTH_HIGH << SDRAMDS_SBD_SHIFT)) - -/* - * Ethernet configuration - */ -#define CONFIG_MPC8220_FEC 1 -#define CONFIG_FEC_10MBIT 1 /* Workaround for FEC 100Mbit problem */ -#define CONFIG_PHY_ADDR 0x1F -#define CONFIG_MII 1 - -/* - * Miscellaneous configurable options - */ -#define CONFIG_SYS_LONGHELP /* undef to save memory */ -#define CONFIG_SYS_PROMPT "=> " /* Monitor Command Prompt */ -#if defined(CONFIG_CMD_KGDB) -#define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */ -#else -#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */ -#endif -#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */ -#define CONFIG_SYS_MAXARGS 16 /* max number of command args */ -#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */ - -#define CONFIG_SYS_MEMTEST_START 0x00100000 /* memtest works on */ -#define CONFIG_SYS_MEMTEST_END 0x00f00000 /* 1 ... 15 MB in DRAM */ - -#define CONFIG_SYS_LOAD_ADDR 0x100000 /* default load address */ - -#define CONFIG_SYS_HZ 1000 /* decrementer freq: 1 ms ticks */ - -#define CONFIG_SYS_CACHELINE_SIZE 32 /* For MPC8220 CPUs */ -#if defined(CONFIG_CMD_KGDB) -# define CONFIG_SYS_CACHELINE_SHIFT 5 /* log base 2 of the above value */ -#endif - -/* - * Various low-level settings - */ -#define CONFIG_SYS_HID0_INIT 0 -#define CONFIG_SYS_HID0_FINAL 0 - -/* -#define CONFIG_SYS_HID0_INIT HID0_ICE | HID0_ICFI -#define CONFIG_SYS_HID0_FINAL HID0_ICE -*/ - -#endif /* __CONFIG_H */ diff --git a/include/configs/t4qds.h b/include/configs/t4qds.h index 2c665b8a9d..fa1dcc3528 100644 --- a/include/configs/t4qds.h +++ b/include/configs/t4qds.h @@ -29,13 +29,14 @@ #ifdef CONFIG_RAMBOOT_PBL #define CONFIG_RAMBOOT_TEXT_BASE CONFIG_SYS_TEXT_BASE #define CONFIG_RESET_VECTOR_ADDRESS 0xfffffffc +#define CONFIG_PBLPBI_CONFIG $(SRCTREE)/board/freescale/t4qds/t4_pbi.cfg +#define CONFIG_PBLRCW_CONFIG $(SRCTREE)/board/freescale/t4qds/t4_rcw.cfg #endif #define CONFIG_CMD_REGINFO /* High Level Configuration Options */ #define CONFIG_BOOKE -#define CONFIG_E6500 #define CONFIG_E500 /* BOOKE e500 family */ #define CONFIG_E500MC /* BOOKE e500mc family */ #define CONFIG_SYS_BOOK3E_HV /* Category E.HV supported */ @@ -444,11 +445,19 @@ unsigned long get_board_ddr_clk(void); #define I2C_MUX_PCA_ADDR_PRI 0x77 /* I2C bus multiplexer,primary */ #define I2C_MUX_PCA_ADDR_SEC 0x76 /* I2C bus multiplexer,secondary */ -/* VSC Crossbar switches */ -#define CONFIG_VSC_CROSSBAR #define I2C_MUX_CH_DEFAULT 0x8 +#define I2C_MUX_CH_VOL_MONITOR 0xa #define I2C_MUX_CH_VSC3316_FS 0xc #define I2C_MUX_CH_VSC3316_BS 0xd + +/* Voltage monitor on channel 2*/ +#define I2C_VOL_MONITOR_ADDR 0x40 +#define I2C_VOL_MONITOR_BUS_V_OFFSET 0x2 +#define I2C_VOL_MONITOR_BUS_V_OVF 0x1 +#define I2C_VOL_MONITOR_BUS_V_SHIFT 3 + +/* VSC Crossbar switches */ +#define CONFIG_VSC_CROSSBAR #define VSC3316_FSM_TX_ADDR 0x70 #define VSC3316_FSM_RX_ADDR 0x71 @@ -504,7 +513,7 @@ unsigned long get_board_ddr_clk(void); */ #define CONFIG_FSL_ESPI #define CONFIG_SPI_FLASH -#define CONFIG_SPI_FLASH_SPANSION +#define CONFIG_SPI_FLASH_SST #define CONFIG_CMD_SF #define CONFIG_SF_DEFAULT_SPEED 10000000 #define CONFIG_SF_DEFAULT_MODE 0 @@ -641,15 +650,10 @@ unsigned long get_board_ddr_clk(void); #define SGMII_CARD_PORT2_PHY_ADDR 0x1D #define SGMII_CARD_PORT3_PHY_ADDR 0x1E #define SGMII_CARD_PORT4_PHY_ADDR 0x1F -#define XFI_CARD_PORT1_PHY_ADDR 0x1 /* tmp, FIXME below addr */ -#define XFI_CARD_PORT2_PHY_ADDR 0x2 -#define XFI_CARD_PORT3_PHY_ADDR 0x3 -#define XFI_CARD_PORT4_PHY_ADDR 0x4 -#define QSGMII_CARD_PHY_ADDR 0x5 -#define FM1_10GEC1_PHY_ADDR 0x6 -#define FM1_10GEC2_PHY_ADDR 0x7 -#define FM2_10GEC1_PHY_ADDR 0x8 -#define FM2_10GEC2_PHY_ADDR 0x9 +#define FM1_10GEC1_PHY_ADDR 0x0 +#define FM1_10GEC2_PHY_ADDR 0x1 +#define FM2_10GEC1_PHY_ADDR 0x2 +#define FM2_10GEC2_PHY_ADDR 0x3 #endif #ifdef CONFIG_PCI @@ -783,8 +787,21 @@ unsigned long get_board_ddr_clk(void); #define __USB_PHY_TYPE utmi +/* + * T4240 has 3 DDR controllers. Default to 3way_4KB interleaving. It can be + * 3way_1KB, 3way_4KB, 3way_8KB. T4160 has 2 DDR controllers. Default to + * cacheline interleaving. It can be cacheline, page, bank, superbank. + * See doc/README.fsl-ddr for details. + */ +#ifdef CONFIG_PPC_T4240 +#define CTRL_INTLV_PREFERED 3way_4KB +#else +#define CTRL_INTLV_PREFERED cacheline +#endif + #define CONFIG_EXTRA_ENV_SETTINGS \ - "hwconfig=fsl_ddr:ctlr_intlv=3way_4KB," \ + "hwconfig=fsl_ddr:" \ + "ctlr_intlv=" __stringify(CTRL_INTLV_PREFERED) "," \ "bank_intlv=auto;" \ "usb1:dr_mode=host,phy_type=" __stringify(__USB_PHY_TYPE) "\0"\ "netdev=eth0\0" \ diff --git a/include/ext4fs.h b/include/ext4fs.h index 025a2e89c2..379f7eb5e9 100644 --- a/include/ext4fs.h +++ b/include/ext4fs.h @@ -141,4 +141,5 @@ long int read_allocated_block(struct ext2_inode *inode, int fileblock); int ext4fs_probe(block_dev_desc_t *fs_dev_desc, disk_partition_t *fs_partition); int ext4_read_file(const char *filename, void *buf, int offset, int len); +int ext4_read_superblock(char *buffer); #endif diff --git a/include/ext_common.h b/include/ext_common.h index 86373a6e50..78a7808aa9 100644 --- a/include/ext_common.h +++ b/include/ext_common.h @@ -34,7 +34,6 @@ #define __EXT_COMMON__ #include <command.h> #define SECTOR_SIZE 0x200 -#define SECTOR_BITS 9 /* Magic value used to identify an ext2 filesystem. */ #define EXT2_MAGIC 0xEF53 @@ -58,18 +57,13 @@ #define FILETYPE_INO_SYMLINK 0120000 #define EXT2_ROOT_INO 2 /* Root inode */ -/* Bits used as offset in sector */ -#define DISK_SECTOR_BITS 9 /* The size of an ext2 block in bytes. */ #define EXT2_BLOCK_SIZE(data) (1 << LOG2_BLOCK_SIZE(data)) -/* Log2 size of ext2 block in 512 blocks. */ -#define LOG2_EXT2_BLOCK_SIZE(data) (__le32_to_cpu \ - (data->sblock.log2_block_size) + 1) - /* Log2 size of ext2 block in bytes. */ -#define LOG2_BLOCK_SIZE(data) (__le32_to_cpu \ - (data->sblock.log2_block_size) + 10) +#define LOG2_BLOCK_SIZE(data) (__le32_to_cpu \ + (data->sblock.log2_block_size) \ + + EXT2_MIN_BLOCK_LOG_SIZE) #define INODE_SIZE_FILESYSTEM(data) (__le32_to_cpu \ (data->sblock.inode_size)) diff --git a/include/faraday/ftsdc010.h b/include/faraday/ftsdc010.h index c34dde7477..8284f53348 100644 --- a/include/faraday/ftsdc010.h +++ b/include/faraday/ftsdc010.h @@ -23,6 +23,7 @@ #define __FTSDC010_H #ifndef __ASSEMBLY__ + /* sd controller register */ struct ftsdc010_mmc { unsigned int cmd; /* 0x00 - command reg */ @@ -143,6 +144,15 @@ int ftsdc010_mmc_init(int dev_index); #define FTSDC010_STATUS_SDIO_IRPT (1 << 16) /* SDIO card intr */ #define FTSDC010_STATUS_DATA0_STATUS (1 << 17) #endif /* CONFIG_FTSDC010_SDIO */ +#define FTSDC010_STATUS_RSP_ERROR \ + (FTSDC010_STATUS_RSP_CRC_FAIL | FTSDC010_STATUS_RSP_TIMEOUT) +#define FTSDC010_STATUS_RSP_MASK \ + (FTSDC010_STATUS_RSP_ERROR | FTSDC010_STATUS_RSP_CRC_OK) +#define FTSDC010_STATUS_DATA_ERROR \ + (FTSDC010_STATUS_DATA_CRC_FAIL | FTSDC010_STATUS_DATA_TIMEOUT) +#define FTSDC010_STATUS_DATA_MASK \ + (FTSDC010_STATUS_DATA_ERROR | FTSDC010_STATUS_DATA_CRC_OK \ + | FTSDC010_STATUS_DATA_END) /* 0x2c - clear register */ #define FTSDC010_CLR_RSP_CRC_FAIL (1 << 0) @@ -192,21 +202,24 @@ int ftsdc010_mmc_init(int dev_index); #define FTSDC010_CCR_CLK_DIV(x) (((x) & 0x7f) << 0) #define FTSDC010_CCR_CLK_SD (1 << 7) /* 0: MMC, 1: SD */ #define FTSDC010_CCR_CLK_DIS (1 << 8) +#define FTSDC010_CCR_CLK_HISPD (1 << 9) /* high speed */ /* card type */ #define FTSDC010_CARD_TYPE_SD FTSDC010_CLOCK_REG_CARD_TYPE #define FTSDC010_CARD_TYPE_MMC 0x0 /* 0x3c - bus width register */ -#define FTSDC010_BWR_SINGLE_BUS (1 << 0) -#define FTSDC010_BWR_WIDE_8_BUS (1 << 1) -#define FTSDC010_BWR_WIDE_4_BUS (1 << 2) -#define FTSDC010_BWR_WIDE_BUS_SUPPORT(x) (((x) >> 3) & 0x3) -#define FTSDC010_BWR_CARD_DETECT (1 << 5) - -#define FTSDC010_BWR_1_BUS_SUPPORT 0x0 -#define FTSDC010_BWR_4_BUS_SUPPORT 0x1 -#define FTSDC010_BWR_8_BUS_SUPPORT 0x2 +#define FTSDC010_BWR_MODE_1BIT (1 << 0) /* 1 bit mode enabled */ +#define FTSDC010_BWR_MODE_8BIT (1 << 1) /* 8 bit mode enabled */ +#define FTSDC010_BWR_MODE_4BIT (1 << 2) /* 4 bit mode enabled */ +#define FTSDC010_BWR_MODE_MASK (7 << 0) +#define FTSDC010_BWR_MODE_SHIFT (0) +#define FTSDC010_BWR_CAPS_1BIT (0 << 3) /* 1 bits mode supported */ +#define FTSDC010_BWR_CAPS_4BIT (1 << 3) /* 1,4 bits mode supported */ +#define FTSDC010_BWR_CAPS_8BIT (2 << 3) /* 1,4,8 bits mode supported */ +#define FTSDC010_BWR_CAPS_MASK (3 << 3) +#define FTSDC010_BWR_CAPS_SHIFT (3) +#define FTSDC010_BWR_CARD_DETECT (1 << 5) /* 0x44 or 0x9c - feature register */ #define FTSDC010_FEATURE_FIFO_DEPTH(x) (((x) >> 0) & 0xff) diff --git a/include/fdt.h b/include/fdt.h index f9612ed821..526aedb515 100644 --- a/include/fdt.h +++ b/include/fdt.h @@ -1,5 +1,56 @@ #ifndef _FDT_H #define _FDT_H +/* + * libfdt - Flat Device Tree manipulation + * Copyright (C) 2006 David Gibson, IBM Corporation. + * Copyright 2012 Kim Phillips, Freescale Semiconductor. + * + * libfdt is dual licensed: you can use it either under the terms of + * the GPL, or the BSD license, at your option. + * + * a) This library is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This library is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public + * License along with this library; if not, write to the Free + * Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, + * MA 02110-1301 USA + * + * Alternatively, + * + * b) Redistribution and use in source and binary forms, with or + * without modification, are permitted provided that the following + * conditions are met: + * + * 1. Redistributions of source code must retain the above + * copyright notice, this list of conditions and the following + * disclaimer. + * 2. Redistributions in binary form must reproduce the above + * copyright notice, this list of conditions and the following + * disclaimer in the documentation and/or other materials + * provided with the distribution. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND + * CONTRIBUTORS "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, + * INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF + * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR + * CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, + * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT + * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) + * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN + * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR + * OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, + * EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ #ifndef __ASSEMBLY__ @@ -57,6 +108,4 @@ struct fdt_property { #define FDT_V16_SIZE FDT_V3_SIZE #define FDT_V17_SIZE (FDT_V16_SIZE + sizeof(fdt32_t)) -/* adding a ramdisk needs 0x44 bytes in version 2008.10 */ -#define FDT_RAMDISK_OVERHEAD 0x80 #endif /* _FDT_H */ diff --git a/include/fdt_support.h b/include/fdt_support.h index 2cccc3551d..8f07a670db 100644 --- a/include/fdt_support.h +++ b/include/fdt_support.h @@ -78,11 +78,9 @@ static inline void fdt_fixup_crypto_node(void *blob, int sec_rev) {} int fdt_pci_dma_ranges(void *blob, int phb_off, struct pci_controller *hose); #endif -#ifdef CONFIG_OF_BOARD_SETUP void ft_board_setup(void *blob, bd_t *bd); void ft_cpu_setup(void *blob, bd_t *bd); void ft_pci_setup(void *blob, bd_t *bd); -#endif void set_working_fdt_addr(void *addr); int fdt_resize(void *blob); diff --git a/include/fm_eth.h b/include/fm_eth.h index 495765b933..8fcf172105 100644 --- a/include/fm_eth.h +++ b/include/fm_eth.h @@ -88,7 +88,7 @@ enum fm_eth_type { #define FM_TGEC_INFO_INITIALIZER(idx, n) \ { \ - FM_ETH_INFO_INITIALIZER(idx, CONFIG_SYS_FM1_TGEC_MDIO_ADDR) \ + FM_ETH_INFO_INITIALIZER(idx, CONFIG_SYS_FM2_TGEC_MDIO_ADDR) \ .index = idx, \ .num = n - 1, \ .type = FM_ETH_10G_E, \ @@ -96,7 +96,7 @@ enum fm_eth_type { .rx_port_id = RX_PORT_10G_BASE + n - 1, \ .tx_port_id = TX_PORT_10G_BASE + n - 1, \ .compat_offset = CONFIG_SYS_FSL_FM##idx##_OFFSET + \ - offsetof(struct ccsr_fman, memac[n-1]),\ + offsetof(struct ccsr_fman, memac[n-1+8]),\ } #else #define FM_DTSEC_INFO_INITIALIZER(idx, n) \ diff --git a/include/hash.h b/include/hash.h index 2dbbd9b7d5..c402067af8 100644 --- a/include/hash.h +++ b/include/hash.h @@ -71,4 +71,26 @@ enum { int hash_command(const char *algo_name, int flags, cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]); +/** + * hash_block() - Hash a block according to the requested algorithm + * + * The caller probably knows the hash length for the chosen algorithm, but + * in order to provide a general interface, and output_size parameter is + * provided. + * + * @algo_name: Hash algorithm to use + * @data: Data to hash + * @len: Lengh of data to hash in bytes + * @output: Place to put hash value + * @output_size: On entry, pointer to the number of bytes available in + * output. On exit, pointer to the number of bytes used. + * If NULL, then it is assumed that the caller has + * allocated enough space for the hash. This is possible + * since the caller is selecting the algorithm. + * @return 0 if ok, -ve on error: -EPROTONOSUPPORT for an unknown algorithm, + * -ENOSPC if the output buffer is not large enough. + */ +int hash_block(const char *algo_name, const void *data, unsigned int len, + uint8_t *output, int *output_size); + #endif diff --git a/include/image.h b/include/image.h index 4ad0e6b21a..b8cc5236a8 100644 --- a/include/image.h +++ b/include/image.h @@ -36,6 +36,9 @@ #include "compiler.h" #include <asm/byteorder.h> +/* Define this to avoid #ifdefs later on */ +struct lmb; + #ifdef USE_HOSTCC /* new uImage format support enabled on host */ @@ -43,19 +46,79 @@ #define CONFIG_OF_LIBFDT 1 #define CONFIG_FIT_VERBOSE 1 /* enable fit_format_{error,warning}() */ +#define IMAGE_ENABLE_IGNORE 0 +#define IMAGE_INDENT_STRING "" + #else #include <lmb.h> #include <asm/u-boot.h> #include <command.h> +/* Take notice of the 'ignore' property for hashes */ +#define IMAGE_ENABLE_IGNORE 1 +#define IMAGE_INDENT_STRING " " + #endif /* USE_HOSTCC */ #if defined(CONFIG_FIT) #include <libfdt.h> #include <fdt_support.h> -#define CONFIG_MD5 /* FIT images need MD5 support */ -#define CONFIG_SHA1 /* and SHA1 */ +# ifdef CONFIG_SPL_BUILD +# ifdef CONFIG_SPL_CRC32_SUPPORT +# define IMAGE_ENABLE_CRC32 1 +# endif +# ifdef CONFIG_SPL_MD5_SUPPORT +# define IMAGE_ENABLE_MD5 1 +# endif +# ifdef CONFIG_SPL_SHA1_SUPPORT +# define IMAGE_ENABLE_SHA1 1 +# endif +# else +# define CONFIG_CRC32 /* FIT images need CRC32 support */ +# define CONFIG_MD5 /* and MD5 */ +# define CONFIG_SHA1 /* and SHA1 */ +# define IMAGE_ENABLE_CRC32 1 +# define IMAGE_ENABLE_MD5 1 +# define IMAGE_ENABLE_SHA1 1 +# endif + +#ifndef IMAGE_ENABLE_CRC32 +#define IMAGE_ENABLE_CRC32 0 +#endif + +#ifndef IMAGE_ENABLE_MD5 +#define IMAGE_ENABLE_MD5 0 +#endif + +#ifndef IMAGE_ENABLE_SHA1 +#define IMAGE_ENABLE_SHA1 0 +#endif + +#endif /* CONFIG_FIT */ + +#ifdef CONFIG_SYS_BOOT_RAMDISK_HIGH +# define IMAGE_ENABLE_RAMDISK_HIGH 1 +#else +# define IMAGE_ENABLE_RAMDISK_HIGH 0 +#endif + +#ifdef CONFIG_OF_LIBFDT +# define IMAGE_ENABLE_OF_LIBFDT 1 +#else +# define IMAGE_ENABLE_OF_LIBFDT 0 +#endif + +#ifdef CONFIG_SYS_BOOT_GET_CMDLINE +# define IMAGE_BOOT_GET_CMDLINE 1 +#else +# define IMAGE_BOOT_GET_CMDLINE 0 +#endif + +#ifdef CONFIG_OF_BOARD_SETUP +# define IMAAGE_OF_BOARD_SETUP 1 +#else +# define IMAAGE_OF_BOARD_SETUP 0 #endif /* @@ -244,9 +307,7 @@ typedef struct bootm_headers { ulong rd_start, rd_end;/* ramdisk start/end */ -#ifdef CONFIG_OF_LIBFDT char *ft_addr; /* flat dev tree address */ -#endif ulong ft_len; /* length of flat device tree */ ulong initrd_start; @@ -333,34 +394,35 @@ int genimg_get_type_id(const char *name); int genimg_get_comp_id(const char *name); void genimg_print_size(uint32_t size); +#if defined(CONFIG_TIMESTAMP) || defined(CONFIG_CMD_DATE) || \ + defined(USE_HOSTCC) +#define IMAGE_ENABLE_TIMESTAMP 1 +#else +#define IMAGE_ENABLE_TIMESTAMP 0 +#endif +void genimg_print_time(time_t timestamp); + #ifndef USE_HOSTCC /* Image format types, returned by _get_format() routine */ #define IMAGE_FORMAT_INVALID 0x00 #define IMAGE_FORMAT_LEGACY 0x01 /* legacy image_header based format */ #define IMAGE_FORMAT_FIT 0x02 /* new, libfdt based format */ -int genimg_get_format(void *img_addr); +int genimg_get_format(const void *img_addr); int genimg_has_config(bootm_headers_t *images); ulong genimg_get_image(ulong img_addr); int boot_get_ramdisk(int argc, char * const argv[], bootm_headers_t *images, uint8_t arch, ulong *rd_start, ulong *rd_end); - -#ifdef CONFIG_OF_LIBFDT int boot_get_fdt(int flag, int argc, char * const argv[], bootm_headers_t *images, char **of_flat_tree, ulong *of_size); void boot_fdt_add_mem_rsv_regions(struct lmb *lmb, void *fdt_blob); int boot_relocate_fdt(struct lmb *lmb, char **of_flat_tree, ulong *of_size); -#endif -#ifdef CONFIG_SYS_BOOT_RAMDISK_HIGH int boot_ramdisk_high(struct lmb *lmb, ulong rd_data, ulong rd_len, ulong *initrd_start, ulong *initrd_end); -#endif /* CONFIG_SYS_BOOT_RAMDISK_HIGH */ -#ifdef CONFIG_SYS_BOOT_GET_CMDLINE int boot_get_cmdline(struct lmb *lmb, ulong *cmd_start, ulong *cmd_end); -#endif /* CONFIG_SYS_BOOT_GET_CMDLINE */ #ifdef CONFIG_SYS_BOOT_GET_KBD int boot_get_kbd(struct lmb *lmb, bd_t **kbd); #endif /* CONFIG_SYS_BOOT_GET_KBD */ @@ -502,6 +564,31 @@ static inline int image_check_target_arch(const image_header_t *hdr) } #endif /* USE_HOSTCC */ +/** + * Set up properties in the FDT + * + * This sets up properties in the FDT that is to be passed to linux. + * + * @images: Images information + * @blob: FDT to update + * @of_size: Size of the FDT + * @lmb: Points to logical memory block structure + * @return 0 if ok, <0 on failure + */ +int image_setup_libfdt(bootm_headers_t *images, void *blob, + int of_size, struct lmb *lmb); + +/** + * Set up the FDT to use for booting a kernel + * + * This performs ramdisk setup, sets up the FDT if required, and adds + * paramters to the FDT if libfdt is available. + * + * @param images Images information + * @return 0 if ok, <0 on failure + */ +int image_setup_linux(bootm_headers_t *images); + /*******************************************************************/ /* New uImage format specific code (prefixed with fit_) */ /*******************************************************************/ @@ -543,7 +630,6 @@ int fit_parse_subimage(const char *spec, ulong addr_curr, void fit_print_contents(const void *fit); void fit_image_print(const void *fit, int noffset, const char *p); -void fit_image_print_hash(const void *fit, int noffset, const char *p); /** * fit_get_end - get FIT image size @@ -599,18 +685,19 @@ int fit_image_get_data(const void *fit, int noffset, int fit_image_hash_get_algo(const void *fit, int noffset, char **algo); int fit_image_hash_get_value(const void *fit, int noffset, uint8_t **value, int *value_len); -#ifndef USE_HOSTCC -int fit_image_hash_get_ignore(const void *fit, int noffset, int *ignore); -#endif int fit_set_timestamp(void *fit, int noffset, time_t timestamp); -int fit_set_hashes(void *fit); -int fit_image_set_hashes(void *fit, int image_noffset); -int fit_image_hash_set_value(void *fit, int noffset, uint8_t *value, - int value_len); -int fit_image_check_hashes(const void *fit, int noffset); -int fit_all_image_check_hashes(const void *fit); +/** + * fit_add_verification_data() - Calculate and add hashes to FIT + * + * @fit: Fit image to process + * @return 0 if ok, <0 for error + */ +int fit_add_verification_data(void *fit); + +int fit_image_verify(const void *fit, int noffset); +int fit_all_image_verify(const void *fit); int fit_image_check_os(const void *fit, int noffset, uint8_t os); int fit_image_check_arch(const void *fit, int noffset, uint8_t arch); int fit_image_check_type(const void *fit, int noffset, uint8_t type); @@ -623,8 +710,28 @@ int fit_conf_get_kernel_node(const void *fit, int noffset); int fit_conf_get_ramdisk_node(const void *fit, int noffset); int fit_conf_get_fdt_node(const void *fit, int noffset); +/** + * fit_conf_get_prop_node() - Get node refered to by a configuration + * @fit: FIT to check + * @noffset: Offset of conf@xxx node to check + * @prop_name: Property to read from the conf node + * + * The conf@ nodes contain references to other nodes, using properties + * like 'kernel = "kernel@1"'. Given such a property name (e.g. "kernel"), + * return the offset of the node referred to (e.g. offset of node + * "/images/kernel@1". + */ +int fit_conf_get_prop_node(const void *fit, int noffset, + const char *prop_name); + void fit_conf_print(const void *fit, int noffset, const char *p); +int fit_check_ramdisk(const void *fit, int os_noffset, + uint8_t arch, int verify); + +int calculate_hash(const void *data, int data_len, const char *algo, + uint8_t *value, int *value_len); + #ifndef USE_HOSTCC static inline int fit_image_check_target_arch(const void *fdt, int node) { diff --git a/include/libfdt.h b/include/libfdt.h index fc7f75b9ff..c5ec2acfd8 100644 --- a/include/libfdt.h +++ b/include/libfdt.h @@ -136,6 +136,28 @@ uint32_t fdt_next_tag(const void *fdt, int offset, int *nextoffset); int fdt_next_node(const void *fdt, int offset, int *depth); +/** + * fdt_first_subnode() - get offset of first direct subnode + * + * @fdt: FDT blob + * @offset: Offset of node to check + * @return offset of first subnode, or -FDT_ERR_NOTFOUND if there is none + */ +int fdt_first_subnode(const void *fdt, int offset); + +/** + * fdt_next_subnode() - get offset of next direct subnode + * + * After first calling fdt_first_subnode(), call this function repeatedly to + * get direct subnodes of a parent node. + * + * @fdt: FDT blob + * @offset: Offset of previous subnode + * @return offset of next subnode, or -FDT_ERR_NOTFOUND if there are no more + * subnodes + */ +int fdt_next_subnode(const void *fdt, int offset); + /**********************************************************************/ /* General functions */ /**********************************************************************/ @@ -582,7 +604,7 @@ const char *fdt_get_alias_namelen(const void *fdt, * value of the property named 'name' in the node /aliases. * * returns: - * a pointer to the expansion of the alias named 'name', of it exists + * a pointer to the expansion of the alias named 'name', if it exists * NULL, if the given alias or the /aliases node does not exist */ const char *fdt_get_alias(const void *fdt, const char *name); @@ -816,6 +838,20 @@ int fdt_node_check_compatible(const void *fdt, int nodeoffset, int fdt_node_offset_by_compatible(const void *fdt, int startoffset, const char *compatible); +/** + * fdt_stringlist_contains - check a string list property for a string + * @strlist: Property containing a list of strings to check + * @listlen: Length of property + * @str: String to search for + * + * This is a utility function provided for convenience. The list contains + * one or more strings, each terminated by \0, as is found in a device tree + * "compatible" property. + * + * @return: 1 if the string is found in the list, 0 not found, or invalid list + */ +int fdt_stringlist_contains(const char *strlist, int listlen, const char *str); + /**********************************************************************/ /* Write-in-place functions */ /**********************************************************************/ diff --git a/include/libfdt_env.h b/include/libfdt_env.h index 3e3defc76c..0821258b05 100644 --- a/include/libfdt_env.h +++ b/include/libfdt_env.h @@ -35,4 +35,7 @@ typedef __be64 fdt64_t; #define fdt64_to_cpu(x) be64_to_cpu(x) #define cpu_to_fdt64(x) cpu_to_be64(x) +/* adding a ramdisk needs 0x44 bytes in version 2008.10 */ +#define FDT_RAMDISK_OVERHEAD 0x80 + #endif /* _LIBFDT_ENV_H */ diff --git a/include/lmb.h b/include/lmb.h index 5d1f4b624a..43082a393f 100644 --- a/include/lmb.h +++ b/include/lmb.h @@ -1,7 +1,6 @@ #ifndef _LINUX_LMB_H #define _LINUX_LMB_H #ifdef __KERNEL__ -#ifdef CONFIG_LMB #include <asm/types.h> /* @@ -57,7 +56,6 @@ lmb_size_bytes(struct lmb_region *type, unsigned long region_nr) void board_lmb_reserve(struct lmb *lmb); void arch_lmb_reserve(struct lmb *lmb); -#endif /* CONFIG_LMB */ #endif /* __KERNEL__ */ #endif /* _LINUX_LMB_H */ diff --git a/include/mmc.h b/include/mmc.h index 8bbc6b6ebe..566db59ac9 100644 --- a/include/mmc.h +++ b/include/mmc.h @@ -68,6 +68,7 @@ #define UNUSABLE_ERR -17 /* Unusable Card */ #define COMM_ERR -18 /* Communications Error */ #define TIMEOUT -19 +#define IN_PROGRESS -20 /* operation is in progress */ #define MMC_CMD_GO_IDLE_STATE 0 #define MMC_CMD_SEND_OP_COND 1 @@ -270,6 +271,10 @@ struct mmc { int (*getcd)(struct mmc *mmc); int (*getwp)(struct mmc *mmc); uint b_max; + char op_cond_pending; /* 1 if we are waiting on an op_cond command */ + char init_in_progress; /* 1 if we have done mmc_start_init() */ + char preinit; /* start init as early as possible */ + uint op_cond_response; /* the response byte from the last op_cond */ }; int mmc_register(struct mmc *mmc); @@ -287,6 +292,31 @@ int mmc_getcd(struct mmc *mmc); int mmc_getwp(struct mmc *mmc); void spl_mmc_load(void) __noreturn; +/** + * Start device initialization and return immediately; it does not block on + * polling OCR (operation condition register) status. Then you should call + * mmc_init, which would block on polling OCR status and complete the device + * initializatin. + * + * @param mmc Pointer to a MMC device struct + * @return 0 on success, IN_PROGRESS on waiting for OCR status, <0 on error. + */ +int mmc_start_init(struct mmc *mmc); + +/** + * Set preinit flag of mmc device. + * + * This will cause the device to be pre-inited during mmc_initialize(), + * which may save boot time if the device is not accessed until later. + * Some eMMC devices take 200-300ms to init, but unfortunately they + * must be sent a series of commands to even get them to start preparing + * for operation. + * + * @param mmc Pointer to a MMC device struct + * @param preinit preinit flag value + */ +void mmc_set_preinit(struct mmc *mmc, int preinit); + #ifdef CONFIG_GENERIC_MMC #define mmc_host_is_spi(mmc) ((mmc)->host_caps & MMC_MODE_SPI) struct mmc *mmc_spi_init(uint bus, uint cs, uint speed, uint mode); diff --git a/include/mpc8220.h b/include/mpc8220.h deleted file mode 100644 index c4900a0f11..0000000000 --- a/include/mpc8220.h +++ /dev/null @@ -1,717 +0,0 @@ -/* - * include/mpc8220.h - * - * Prototypes, etc. for the Motorola MPC8220 - * embedded cpu chips - * - * 2004 (c) Freescale, Inc. - * Author: TsiChung Liew <Tsi-Chung.Liew@freescale.com> - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ -#ifndef __MPC8220_H__ -#define __MPC8220_H__ - -/* Processor name */ -#if defined(CONFIG_MPC8220) -#define CPU_ID_STR "MPC8220" -#endif - -/* Exception offsets (PowerPC standard) */ -#define EXC_OFF_SYS_RESET 0x0100 -#define _START_OFFSET EXC_OFF_SYS_RESET - -/* Internal memory map */ -/* MPC8220 Internal Register MMAP */ -#define MMAP_MBAR (CONFIG_SYS_MBAR + 0x00000000) /* chip selects */ -#define MMAP_MEMCTL (CONFIG_SYS_MBAR + 0x00000100) /* sdram controller */ -#define MMAP_XLBARB (CONFIG_SYS_MBAR + 0x00000200) /* xlb arbitration control */ -#define MMAP_CDM (CONFIG_SYS_MBAR + 0x00000300) /* clock distribution module */ -#define MMAP_VDOPLL (CONFIG_SYS_MBAR + 0x00000400) /* video PLL */ -#define MMAP_FB (CONFIG_SYS_MBAR + 0x00000500) /* flex bus controller */ -#define MMAP_PCFG (CONFIG_SYS_MBAR + 0x00000600) /* port config */ -#define MMAP_ICTL (CONFIG_SYS_MBAR + 0x00000700) /* interrupt controller */ -#define MMAP_GPTMR (CONFIG_SYS_MBAR + 0x00000800) /* general purpose timers */ -#define MMAP_SLTMR (CONFIG_SYS_MBAR + 0x00000900) /* slice timers */ -#define MMAP_GPIO (CONFIG_SYS_MBAR + 0x00000A00) /* gpio module */ -#define MMAP_XCPCI (CONFIG_SYS_MBAR + 0x00000B00) /* pci controller */ -#define MMAP_PCIARB (CONFIG_SYS_MBAR + 0x00000C00) /* pci arbiter */ -#define MMAP_EXTDMA1 (CONFIG_SYS_MBAR + 0x00000D00) /* external dma1 */ -#define MMAP_EXTDMA2 (CONFIG_SYS_MBAR + 0x00000E00) /* external dma1 */ -#define MMAP_USBH (CONFIG_SYS_MBAR + 0x00001000) /* usb host */ -#define MMAP_CMTMR (CONFIG_SYS_MBAR + 0x00007f00) /* comm timers */ -#define MMAP_DMA (CONFIG_SYS_MBAR + 0x00008000) /* dma */ -#define MMAP_USBD (CONFIG_SYS_MBAR + 0x00008200) /* usb device */ -#define MMAP_COMMPCI (CONFIG_SYS_MBAR + 0x00008400) /* pci comm Bus regs */ -#define MMAP_1284 (CONFIG_SYS_MBAR + 0x00008500) /* 1284 */ -#define MMAP_PEV (CONFIG_SYS_MBAR + 0x00008600) /* print engine video */ -#define MMAP_PSC1 (CONFIG_SYS_MBAR + 0x00008800) /* psc1 block */ -#define MMAP_I2C (CONFIG_SYS_MBAR + 0x00008f00) /* i2c controller */ -#define MMAP_FEC1 (CONFIG_SYS_MBAR + 0x00009000) /* fast ethernet 1 */ -#define MMAP_FEC2 (CONFIG_SYS_MBAR + 0x00009800) /* fast ethernet 2 */ -#define MMAP_JBIGRAM (CONFIG_SYS_MBAR + 0x0000a000) /* jbig RAM */ -#define MMAP_JBIG (CONFIG_SYS_MBAR + 0x0000c000) /* jbig */ -#define MMAP_PDLA (CONFIG_SYS_MBAR + 0x00010000) /* */ -#define MMAP_SRAMCFG (CONFIG_SYS_MBAR + 0x0001ff00) /* SRAM config */ -#define MMAP_SRAM (CONFIG_SYS_MBAR + 0x00020000) /* SRAM */ - -#define SRAM_SIZE 0x8000 /* 32 KB */ - -/* ------------------------------------------------------------------------ */ -/* - * Macro for Programmable Serial Channel - */ -/* equates for mode reg. 1 for channel A or B */ -#define PSC_MR1_RX_RTS 0x80000000 /* receiver RTS enabled */ -#define PSC_MR1_RX_INT 0x40000000 /* receiver intrupt enabled */ -#define PSC_MR1_ERR_MODE 0x20000000 /* block error mode */ -#define PSC_MR1_PAR_MODE_MULTI 0x18000000 /* multi_drop mode */ -#define PSC_MR1_NO_PARITY 0x10000000 /* no parity mode */ -#define PSC_MR1_ALWAYS_0 0x08000000 /* force parity mode */ -#define PSC_MR1_ALWAYS_1 0x0c000000 /* force parity mode */ -#define PSC_MR1_EVEN_PARITY 0x00000000 /* parity mode */ -#define PSC_MR1_ODD_PARITY 0x04000000 /* 0 = even, 1 = odd */ -#define PSC_MR1_BITS_CHAR_8 0x03000000 /* 8 bits */ -#define PSC_MR1_BITS_CHAR_7 0x02000000 /* 7 bits */ -#define PSC_MR1_BITS_CHAR_6 0x01000000 /* 6 bits */ -#define PSC_MR1_BITS_CHAR_5 0x00000000 /* 5 bits */ - -/* equates for mode reg. 2 for channel A or B */ -#define PSC_MR2_NORMAL_MODE 0x00000000 /* normal channel mode */ -#define PSC_MR2_AUTO_MODE 0x40000000 /* automatic channel mode */ -#define PSC_MR2_LOOPBACK_LOCL 0x80000000 /* local loopback channel mode */ -#define PSC_MR2_LOOPBACK_REMT 0xc0000000 /* remote loopback channel mode */ -#define PSC_MR2_TX_RTS 0x20000000 /* transmitter RTS enabled */ -#define PSC_MR2_TX_CTS 0x10000000 /* transmitter CTS enabled */ -#define PSC_MR2_STOP_BITS_2 0x0f000000 /* 2 stop bits */ -#define PSC_MR2_STOP_BITS_1 0x07000000 /* 1 stop bit */ - -/* equates for status reg. A or B */ -#define PSC_SR_BREAK 0x80000000 /* received break */ -#define PSC_SR_NEOF PSC_SR_BREAK /* Next byte is EOF - MIR/FIR */ -#define PSC_SR_FRAMING 0x40000000 /* framing error */ -#define PSC_SR_PHYERR PSC_SR_FRAMING/* Physical Layer error - MIR/FIR */ -#define PSC_SR_PARITY 0x20000000 /* parity error */ -#define PSC_SR_CRCERR PSC_SR_PARITY /* CRC error */ -#define PSC_SR_OVERRUN 0x10000000 /* overrun error */ -#define PSC_SR_TXEMT 0x08000000 /* transmitter empty */ -#define PSC_SR_TXRDY 0x04000000 /* transmitter ready*/ -#define PSC_SR_FFULL 0x02000000 /* fifo full */ -#define PSC_SR_RXRDY 0x01000000 /* receiver ready */ -#define PSC_SR_DEOF 0x00800000 /* Detect EOF or RX-FIFO contain EOF */ -#define PSC_SR_ERR 0x00400000 /* Error Status including FIFO */ - -/* equates for clock select reg. */ -#define PSC_CSRX16EXT_CLK 0x1110 /* x 16 ext_clock */ -#define PSC_CSRX1EXT_CLK 0x1111 /* x 1 ext_clock */ - -/* equates for command reg. A or B */ -#define PSC_CR_NO_COMMAND 0x00000000 /* no command */ -#define PSC_CR_RST_MR_PTR_CMD 0x10000000 /* reset mr pointer command */ -#define PSC_CR_RST_RX_CMD 0x20000000 /* reset receiver command */ -#define PSC_CR_RST_TX_CMD 0x30000000 /* reset transmitter command */ -#define PSC_CR_RST_ERR_STS_CMD 0x40000000 /* reset error status cmnd */ -#define PSC_CR_RST_BRK_INT_CMD 0x50000000 /* reset break int. command */ -#define PSC_CR_STR_BREAK_CMD 0x60000000 /* start break command */ -#define PSC_CR_STP_BREAK_CMD 0x70000000 /* stop break command */ -#define PSC_CR_RX_ENABLE 0x01000000 /* receiver enabled */ -#define PSC_CR_RX_DISABLE 0x02000000 /* receiver disabled */ -#define PSC_CR_TX_ENABLE 0x04000000 /* transmitter enabled */ -#define PSC_CR_TX_DISABLE 0x08000000 /* transmitter disabled */ - -/* equates for input port change reg. */ -#define PSC_IPCR_SYNC 0x80000000 /* Sync Detect */ -#define PSC_IPCR_D_CTS 0x10000000 /* Delta CTS */ -#define PSC_IPCR_CTS 0x01000000 /* CTS - current state of PSC_CTS */ - -/* equates for auxiliary control reg. (timer and counter clock selects) */ -#define PSC_ACR_BRG 0x80000000 /* for 68681 compatibility - baud rate gen select - 0 = set 1; 1 = set 2 - equates are set 2 ONLY */ -#define PSC_ACR_TMR_EXT_CLK_16 0x70000000 /* xtnl clock divided by 16 */ -#define PSC_ACR_TMR_EXT_CLK 0x60000000 /* external clock */ -#define PSC_ACR_TMR_IP2_16 0x50000000 /* ip2 divided by 16 */ -#define PSC_ACR_TMR_IP2 0x40000000 /* ip2 */ -#define PSC_ACR_CTR_EXT_CLK_16 0x30000000 /* xtnl clock divided by 16 */ -#define PSC_ACR_CTR_TXCB 0x20000000 /* channel B xmitr clock */ -#define PSC_ACR_CTR_TXCA 0x10000000 /* channel A xmitr clock */ -#define PSC_ACR_CTR_IP2 0x00000000 /* ip2 */ -#define PSC_ACR_IEC0 0x01000000 /* interrupt enable ctrl for D_CTS */ - -/* equates for int. status reg. */ -#define PSC_ISR_IPC 0x80000000 /* input port change*/ -#define PSC_ISR_BREAK 0x04000000 /* delta break */ -#define PSC_ISR_RX_RDY 0x02000000 /* receiver rdy /fifo full */ -#define PSC_ISR_TX_RDY 0x01000000 /* transmitter ready */ -#define PSC_ISR_DEOF 0x00800000 /* Detect EOF / RX-FIFO contains EOF */ -#define PSC_ISR_ERR 0x00400000 /* Error Status including FIFO */ - -/* equates for int. mask reg. */ -#define PSC_IMR_CLEAR 0xff000000 /* Clear the imr */ -#define PSC_IMR_IPC 0x80000000 /* input port change*/ -#define PSC_IMR_BREAK 0x04000000 /* delta break */ -#define PSC_IMR_RX_RDY 0x02000000 /* rcvr ready / fifo full */ -#define PSC_IMR_TX_RDY 0x01000000 /* transmitter ready */ -#define PSC_IMR_DEOF 0x00800000 /* Detect EOF / RX-FIFO contains EOF */ -#define PSC_IMR_ERR 0x00400000 /* Error Status including FIFO */ - -/* equates for input port reg. */ -#define PSC_IP_LPWRB 0x80000000 /* Low power mode in Ac97 */ -#define PSC_IP_TGL 0x40000000 /* test usage */ -#define PSC_IP_CTS 0x01000000 /* CTS */ - -/* equates for output port bit set reg. */ -#define PSC_OPSET_RTS 0x01000000 /* Assert PSC_RTS output */ - -/* equates for output port bit reset reg. */ -#define PSC_OPRESET_RTS 0x01000000 /* Assert PSC_RTS output */ - -/* equates for rx FIFO number of data reg. */ -#define PSC_RFNUM(x) ((x&0xff)<<24)/* receive count */ - -/* equates for tx FIFO number of data reg. */ -#define PSC_TFNUM(x) ((x&0xff)<<24)/* receive count */ - -/* equates for rx FIFO status reg */ -#define PSC_RFSTAT_TAG(x) ((x&3)<<28) /* tag */ -#define PSC_RFSTAT_FRAME0 0x08 /* Frame Indicator 0 */ -#define PSC_RFSTAT_FRAME1 0x04 /* Frame Indicator 1 */ -#define PSC_RFSTAT_FRAME2 0x02 /* Frame Indicator 2 */ -#define PSC_RFSTAT_FRAME3 0x01 /* Frame Indicator 3 */ -#define PSC_RFSTAT_FRAME(x) ((x&0x0f)<<24)/* Frame indicator */ -#define PSC_RFSTAT_ERR 0x00400000 /* Fifo err */ -#define PSC_RFSTAT_UF 0x00200000 /* Underflow */ -#define PSC_RFSTAT_OF 0x00100000 /* overflow */ -#define PSC_RFSTAT_FR 0x00080000 /* frame ready */ -#define PSC_RFSTAT_FULL 0x00040000 /* full */ -#define PSC_RFSTAT_ALARM 0x00020000 /* alarm */ -#define PSC_RFSTAT_EMPTY 0x00010000 /* empty */ - -/* equates for tx FIFO status reg */ -#define PSC_TFSTAT_TAG(x) ((x&3)<<28) /* tag */ -#define PSC_TFSTAT_FRAME0 0x08 /* Frame Indicator 0 */ -#define PSC_TFSTAT_FRAME1 0x04 /* Frame Indicator 1 */ -#define PSC_TFSTAT_FRAME2 0x02 /* Frame Indicator 2 */ -#define PSC_TFSTAT_FRAME3 0x01 /* Frame Indicator 3 */ -#define PSC_TFSTAT_FRAME(x) ((x&0x0f)<<24)/* Frame indicator */ -#define PSC_TFSTAT_ERR 0x00400000 /* Fifo err */ -#define PSC_TFSTAT_UF 0x00200000 /* Underflow */ -#define PSC_TFSTAT_OF 0x00100000 /* overflow */ -#define PSC_TFSTAT_FR 0x00080000 /* frame ready */ -#define PSC_TFSTAT_FULL 0x00040000 /* full */ -#define PSC_TFSTAT_ALARM 0x00020000 /* alarm */ -#define PSC_TFSTAT_EMPTY 0x00010000 /* empty */ - -/* equates for rx FIFO control reg. */ -#define PSC_RFCNTL_WTAG(x) ((x&3)<<29) /* Write tag */ -#define PSC_RFCNTL_FRAME 0x08000000 /* Frame mode enable */ -#define PSC_RFCNTL_GR(x) ((x&7)<<24) /* Granularity */ - -/* equates for tx FIFO control reg. */ -#define PSC_TFCNTL_WTAG(x) ((x&3)<<29) /* Write tag */ -#define PSC_TFCNTL_FRAME 0x08000000 /* Frame mode enable */ -#define PSC_TFCNTL_GR(x) ((x&7)<<24) /* Granularity */ - -/* equates for rx FIFO alarm reg */ -#define PSC_RFALARM(x) (x&0x1ff) /* Alarm */ - -/* equates for tx FIFO alarm reg */ -#define PSC_TFALARM(x) (x&0x1ff) /* Alarm */ - -/* equates for rx FIFO read pointer */ -#define PSC_RFRPTR(x) (x&0x1ff) /* read pointer */ - -/* equates for tx FIFO read pointer */ -#define PSC_TFRPTR(x) (x&0x1ff) /* read pointer */ - -/* equates for rx FIFO write pointer */ -#define PSC_RFWPTR(x) (x&0x1ff) /* write pointer */ - -/* equates for rx FIFO write pointer */ -#define PSC_TFWPTR(x) (x&0x1ff) /* write pointer */ - -/* equates for rx FIFO last read frame pointer reg */ -#define PSC_RFLRFPTR(x) (x&0x1ff) /* last read frame pointer */ - -/* equates for tx FIFO last read frame pointer reg */ -#define PSC_TFLRFPTR(x) (x&0x1ff) /* last read frame pointer */ - -/* equates for rx FIFO last write frame pointer reg */ -#define PSC_RFLWFPTR(x) (x&0x1ff) /* last write frame pointer */ - -/* equates for tx FIFO last write frame pointer reg */ -#define PSC_TFLWFPTR(x) (x&0x1ff) /* last write frame pointer */ - -/* PCI configuration (only for PLL determination)*/ -#define PCI_REG_PCIGSCR (MMAP_XCPCI + 0x60) /* Global status/control register */ -#define PCI_REG_PCIGSCR_PCI2XLB_CLK_MASK 0x07000000 -#define PCI_REG_PCIGSCR_PCI2XLB_CLK_BIT 24 - -#define PCI_REG_PCICAR (MMAP_XCPCI + 0xF8) /* Configuration Address Register */ - -/* ------------------------------------------------------------------------ */ -/* - * Macro for General Purpose Timer - */ -/* Enable and Mode Select */ -#define GPT_OCT(x) (x & 0x3)<<4/* Output Compare Type */ -#define GPT_ICT(x) (x & 0x3) /* Input Capture Type */ -#define GPT_CTRL_WDEN 0x80 /* Watchdog Enable */ -#define GPT_CTRL_CE 0x10 /* Counter Enable */ -#define GPT_CTRL_STPCNT 0x04 /* Stop continous */ -#define GPT_CTRL_ODRAIN 0x02 /* Open Drain */ -#define GPT_CTRL_INTEN 0x01 /* Interrupt Enable */ -#define GPT_MODE_GPIO(x) (x & 0x3)<<4/* Gpio Mode Type */ -#define GPT_TMS_ICT 0x01 /* Input Capture Enable */ -#define GPT_TMS_OCT 0x02 /* Output Capture Enable */ -#define GPT_TMS_PWM 0x03 /* PWM Capture Enable */ -#define GPT_TMS_SGPIO 0x04 /* PWM Capture Enable */ - -#define GPT_PWM_WIDTH(x) (x & 0xffff) - -/* Status */ -#define GPT_STA_CAPTURE(x) (x & 0xffff)/* Read of internal counter */ - -#define GPT_OVFPIN_OVF(x) (x & 0x70) /* Internal counter roll over */ -#define GPT_OVFPIN_PIN 0x01 /* Input pin - Timer 0 and 1 */ - -#define GPT_INT_TEXP 0x08 /* Timer Expired in Internal Timer mode */ -#define GPT_INT_PWMP 0x04 /* PWM end of period occurred */ -#define GPT_INT_COMP 0x02 /* OC reference event occurred */ -#define GPT_INT_CAPT 0x01 /* IC reference event occurred */ - -/* ------------------------------------------------------------------------ */ -/* - * Port configuration - */ -#define CONFIG_SYS_FEC1_PORT0_CONFIG 0x00000000 -#define CONFIG_SYS_FEC1_PORT1_CONFIG 0x00000000 -#define CONFIG_SYS_1284_PORT0_CONFIG 0x00000000 -#define CONFIG_SYS_1284_PORT1_CONFIG 0x00000000 -#define CONFIG_SYS_FEC2_PORT2_CONFIG 0x00000000 -#define CONFIG_SYS_PEV_PORT2_CONFIG 0x00000000 -#define CONFIG_SYS_GP0_PORT0_CONFIG 0x00000000 -#define CONFIG_SYS_GP1_PORT2_CONFIG 0xaaaaaac0 -#define CONFIG_SYS_PSC_PORT3_CONFIG 0x00020000 -#define CONFIG_SYS_CS1_PORT3_CONFIG 0x00000000 -#define CONFIG_SYS_CS2_PORT3_CONFIG 0x10000000 -#define CONFIG_SYS_CS3_PORT3_CONFIG 0x40000000 -#define CONFIG_SYS_CS4_PORT3_CONFIG 0x00000400 -#define CONFIG_SYS_CS5_PORT3_CONFIG 0x00000200 -#define CONFIG_SYS_PCI_PORT3_CONFIG 0x01400180 -#define CONFIG_SYS_I2C_PORT3_CONFIG 0x00000000 -#define CONFIG_SYS_GP2_PORT3_CONFIG 0x000200a0 - -/* ------------------------------------------------------------------------ */ -/* - * DRAM configuration - */ - -/* Field definitions for the control register */ -#define CTL_MODE_ENABLE_SHIFT 31 -#define CTL_CKE_SHIFT 30 -#define CTL_DDR_SHIFT 29 -#define CTL_REFRESH_SHIFT 28 -#define CTL_ADDRMUX_SHIFT 24 -#define CTL_PRECHARGE_SHIFT 23 -#define CTL_DRIVE_RULE_SHIFT 22 -#define CTL_REFRESH_INTERVAL_SHIFT 16 -#define CTL_DQSOEN_SHIFT 8 -#define CTL_BUFFERED_SHIFT 4 -#define CTL_REFRESH_CMD_SHIFT 2 -#define CTL_PRECHARGE_CMD_SHIFT 1 - -#define CTL_MODE_ENABLE (1<<CTL_MODE_ENABLE_SHIFT) -#define CTL_CKE_HIGH (1<<CTL_CKE_SHIFT) -#define CTL_DDR_MODE (1<<CTL_DDR_SHIFT) -#define CTL_REFRESH_ENABLE (1<<CTL_REFRESH_SHIFT) -#define CTL_ADDRMUX(value) ((value)<<CTL_ADDRMUX_SHIFT) -#define CTL_A8PRECHARGE (1<<CTL_PRECHARGE_SHIFT) -#define CTL_REFRESH_INTERVAL(value) ((value)<<CTL_REFRESH_INTERVAL_SHIFT) -#define CTL_DQSOEN(value) ((value)<<CTL_DQSOEN_SHIFT) -#define CTL_BUFFERED (1<<CTL_BUFFERED_SHIFT) -#define CTL_REFRESH_CMD (1<<CTL_REFRESH_CMD_SHIFT) -#define CTL_PRECHARGE_CMD (1<<CTL_PRECHARGE_CMD_SHIFT) - -/* Field definitions for config register 1 */ - -#define CFG1_SRD2RWP_SHIFT 28 -#define CFG1_SWT2RWP_SHIFT 24 -#define CFG1_RLATENCY_SHIFT 20 -#define CFG1_ACT2WR_SHIFT 16 -#define CFG1_PRE2ACT_SHIFT 12 -#define CFG1_REF2ACT_SHIFT 8 -#define CFG1_WLATENCY_SHIFT 4 - -#define CFG1_SRD2RWP(value) ((value)<<CFG1_SRD2RWP_SHIFT) -#define CFG1_SWT2RWP(value) ((value)<<CFG1_SWT2RWP_SHIFT) -#define CFG1_RLATENCY(value) ((value)<<CFG1_RLATENCY_SHIFT) -#define CFG1_ACT2WR(value) ((value)<<CFG1_ACT2WR_SHIFT) -#define CFG1_PRE2ACT(value) ((value)<<CFG1_PRE2ACT_SHIFT) -#define CFG1_REF2ACT(value) ((value)<<CFG1_REF2ACT_SHIFT) -#define CFG1_WLATENCY(value) ((value)<<CFG1_WLATENCY_SHIFT) - -/* Field definitions for config register 2 */ -#define CFG2_BRD2RP_SHIFT 28 -#define CFG2_BWT2RWP_SHIFT 24 -#define CFG2_BRD2WT_SHIFT 20 -#define CFG2_BURSTLEN_SHIFT 16 - -#define CFG2_BRD2RP(value) ((value)<<CFG2_BRD2RP_SHIFT) -#define CFG2_BWT2RWP(value) ((value)<<CFG2_BWT2RWP_SHIFT) -#define CFG2_BRD2WT(value) ((value)<<CFG2_BRD2WT_SHIFT) -#define CFG2_BURSTLEN(value) ((value)<<CFG2_BURSTLEN_SHIFT) - -/* Field definitions for the mode/extended mode register - mode - * register access - */ -#define MODE_REG_SHIFT 30 -#define MODE_OPMODE_SHIFT 25 -#define MODE_CL_SHIFT 22 -#define MODE_BT_SHIFT 21 -#define MODE_BURSTLEN_SHIFT 18 -#define MODE_CMD_SHIFT 16 - -#define MODE_MODE 0 -#define MODE_OPMODE(value) ((value)<<MODE_OPMODE_SHIFT) -#define MODE_CL(value) ((value)<<MODE_CL_SHIFT) -#define MODE_BT_INTERLEAVED (1<<MODE_BT_SHIFT) -#define MODE_BT_SEQUENTIAL (0<<MODE_BT_SHIFT) -#define MODE_BURSTLEN(value) ((value)<<MODE_BURSTLEN_SHIFT) -#define MODE_CMD (1<<MODE_CMD_SHIFT) - -#define MODE_BURSTLEN_8 3 -#define MODE_BURSTLEN_4 2 -#define MODE_BURSTLEN_2 1 - -#define MODE_CL_2 2 -#define MODE_CL_2p5 6 -#define MODE_OPMODE_NORMAL 0 -#define MODE_OPMODE_RESETDLL 2 - - -/* Field definitions for the mode/extended mode register - extended - * mode register access - */ -#define MODE_X_DLL_SHIFT 18 /* DLL enable/disable */ -#define MODE_X_DS_SHIFT 19 /* Drive strength normal/reduced */ -#define MODE_X_QFC_SHIFT 20 /* QFC function (whatever that is) */ -#define MODE_X_OPMODE_SHIFT 21 - -#define MODE_EXTENDED (1<<MODE_REG_SHIFT) -#define MODE_X_DLL_ENABLE 0 -#define MODE_X_DLL_DISABLE (1<<MODE_X_DLL_SHIFT) -#define MODE_X_DS_NORMAL 0 -#define MODE_X_DS_REDUCED (1<<MODE_X_DS_SHIFT) -#define MODE_X_QFC_DISABLED 0 -#define MODE_X_OPMODE(value) ((value)<<MODE_X_OPMODE_SHIFT) - -#ifndef __ASSEMBLY__ -/* - * DMA control/status registers. - */ -struct mpc8220_dma { - u32 taskBar; /* DMA + 0x00 */ - u32 currentPointer; /* DMA + 0x04 */ - u32 endPointer; /* DMA + 0x08 */ - u32 variablePointer;/* DMA + 0x0c */ - - u8 IntVect1; /* DMA + 0x10 */ - u8 IntVect2; /* DMA + 0x11 */ - u16 PtdCntrl; /* DMA + 0x12 */ - - u32 IntPend; /* DMA + 0x14 */ - u32 IntMask; /* DMA + 0x18 */ - - u16 tcr_0; /* DMA + 0x1c */ - u16 tcr_1; /* DMA + 0x1e */ - u16 tcr_2; /* DMA + 0x20 */ - u16 tcr_3; /* DMA + 0x22 */ - u16 tcr_4; /* DMA + 0x24 */ - u16 tcr_5; /* DMA + 0x26 */ - u16 tcr_6; /* DMA + 0x28 */ - u16 tcr_7; /* DMA + 0x2a */ - u16 tcr_8; /* DMA + 0x2c */ - u16 tcr_9; /* DMA + 0x2e */ - u16 tcr_a; /* DMA + 0x30 */ - u16 tcr_b; /* DMA + 0x32 */ - u16 tcr_c; /* DMA + 0x34 */ - u16 tcr_d; /* DMA + 0x36 */ - u16 tcr_e; /* DMA + 0x38 */ - u16 tcr_f; /* DMA + 0x3a */ - - u8 IPR0; /* DMA + 0x3c */ - u8 IPR1; /* DMA + 0x3d */ - u8 IPR2; /* DMA + 0x3e */ - u8 IPR3; /* DMA + 0x3f */ - u8 IPR4; /* DMA + 0x40 */ - u8 IPR5; /* DMA + 0x41 */ - u8 IPR6; /* DMA + 0x42 */ - u8 IPR7; /* DMA + 0x43 */ - u8 IPR8; /* DMA + 0x44 */ - u8 IPR9; /* DMA + 0x45 */ - u8 IPR10; /* DMA + 0x46 */ - u8 IPR11; /* DMA + 0x47 */ - u8 IPR12; /* DMA + 0x48 */ - u8 IPR13; /* DMA + 0x49 */ - u8 IPR14; /* DMA + 0x4a */ - u8 IPR15; /* DMA + 0x4b */ - u8 IPR16; /* DMA + 0x4c */ - u8 IPR17; /* DMA + 0x4d */ - u8 IPR18; /* DMA + 0x4e */ - u8 IPR19; /* DMA + 0x4f */ - u8 IPR20; /* DMA + 0x50 */ - u8 IPR21; /* DMA + 0x51 */ - u8 IPR22; /* DMA + 0x52 */ - u8 IPR23; /* DMA + 0x53 */ - u8 IPR24; /* DMA + 0x54 */ - u8 IPR25; /* DMA + 0x55 */ - u8 IPR26; /* DMA + 0x56 */ - u8 IPR27; /* DMA + 0x57 */ - u8 IPR28; /* DMA + 0x58 */ - u8 IPR29; /* DMA + 0x59 */ - u8 IPR30; /* DMA + 0x5a */ - u8 IPR31; /* DMA + 0x5b */ - - u32 res1; /* DMA + 0x5c */ - u32 res2; /* DMA + 0x60 */ - u32 res3; /* DMA + 0x64 */ - u32 MDEDebug; /* DMA + 0x68 */ - u32 ADSDebug; /* DMA + 0x6c */ - u32 Value1; /* DMA + 0x70 */ - u32 Value2; /* DMA + 0x74 */ - u32 Control; /* DMA + 0x78 */ - u32 Status; /* DMA + 0x7c */ - u32 EU00; /* DMA + 0x80 */ - u32 EU01; /* DMA + 0x84 */ - u32 EU02; /* DMA + 0x88 */ - u32 EU03; /* DMA + 0x8c */ - u32 EU04; /* DMA + 0x90 */ - u32 EU05; /* DMA + 0x94 */ - u32 EU06; /* DMA + 0x98 */ - u32 EU07; /* DMA + 0x9c */ - u32 EU10; /* DMA + 0xa0 */ - u32 EU11; /* DMA + 0xa4 */ - u32 EU12; /* DMA + 0xa8 */ - u32 EU13; /* DMA + 0xac */ - u32 EU14; /* DMA + 0xb0 */ - u32 EU15; /* DMA + 0xb4 */ - u32 EU16; /* DMA + 0xb8 */ - u32 EU17; /* DMA + 0xbc */ - u32 EU20; /* DMA + 0xc0 */ - u32 EU21; /* DMA + 0xc4 */ - u32 EU22; /* DMA + 0xc8 */ - u32 EU23; /* DMA + 0xcc */ - u32 EU24; /* DMA + 0xd0 */ - u32 EU25; /* DMA + 0xd4 */ - u32 EU26; /* DMA + 0xd8 */ - u32 EU27; /* DMA + 0xdc */ - u32 EU30; /* DMA + 0xe0 */ - u32 EU31; /* DMA + 0xe4 */ - u32 EU32; /* DMA + 0xe8 */ - u32 EU33; /* DMA + 0xec */ - u32 EU34; /* DMA + 0xf0 */ - u32 EU35; /* DMA + 0xf4 */ - u32 EU36; /* DMA + 0xf8 */ - u32 EU37; /* DMA + 0xfc */ -}; - -/* - * PCI Header Registers - */ -typedef struct mpc8220_xcpci { - u32 dev_ven_id; /* 0xb00 - device/vendor ID */ - u32 stat_cmd_reg; /* 0xb04 - status command register */ - u32 class_code_rev_id; /* 0xb08 - class code / revision ID */ - u32 bist_htyp_lat_cshl; /* 0xb0c - BIST/HeaderType/Latency/cache line */ - u32 base0; /* 0xb10 - base address 0 */ - u32 base1; /* 0xb14 - base address 1 */ - u32 reserved1[4]; /* 0xb18->0xd27 - base address 2 - 5 */ - u32 cis; /* 0xb28 - cardBus CIS pointer */ - u32 sub_sys_ven_id; /* 0xb2c - sub system ID/ subsystem vendor ID */ - u32 reserved2; /* 0xb30 - expansion ROM base address */ - u32 reserved3; /* 0xb00 - reserved */ - u32 reserved4; /* 0xb00 - reserved */ - u32 mlat_mgnt_ipl; /* 0xb3c - MaxLat/MinGnt/ int pin/int line */ - u32 reserved5[8]; - /* MPC8220 specific - not accessible in PCI header space externally */ - u32 glb_stat_ctl; /* 0xb60 - Global Status Control */ - u32 target_bar0; /* 0xb64 - Target Base Address 0 */ - u32 target_bar1; /* 0xb68 - Target Base Address 1 */ - u32 target_ctrl; /* 0xb6c - Target Control */ - u32 init_win0; /* 0xb70 - Initiator Window 0 Base/Translation */ - u32 init_win1; /* 0xb74 - Initiator Window 1 Base/Translation */ - u32 init_win2; /* 0xb78 - Initiator Window 2 Base/Translation */ - u32 reserved6; /* 0xb7c - reserved */ - u32 init_win_cfg; /* 0xb80 */ - u32 init_ctrl; /* 0xb84 */ - u32 init_stat; /* 0xb88 */ - u32 reserved7[27]; - u32 cfg_adr; /* 0xbf8 */ - u32 reserved8; -} mpc8220_xcpci_t; - -/* PCI->XLB space translation (MPC8220 target), reg0 can address max 256MB, - reg1 - 1GB */ -#define PCI_BASE_ADDR_REG0 0x40000000 -#define PCI_BASE_ADDR_REG1 (CONFIG_SYS_SDRAM_BASE) -#define PCI_TARGET_BASE_ADDR_REG0 (CONFIG_SYS_MBAR) -#define PCI_TARGET_BASE_ADDR_REG1 (CONFIG_SYS_SDRAM_BASE) -#define PCI_TARGET_BASE_ADDR_EN 1<<0 - - -/* PCI Global Status/Control Register (PCIGSCR) */ -#define PCI_GLB_STAT_CTRL_PE_SHIFT 29 -#define PCI_GLB_STAT_CTRL_SE_SHIFT 28 -#define PCI_GLB_STAT_CTRL_XLB_TO_PCI_CLK_SHIFT 24 -#define PCI_GLB_STAT_CTRL_XLB_TO_PCI_CLK_MASK 0x7 -#define PCI_GLB_STAT_CTRL_IPG_TO_PCI_CLK_SHIFT 16 -#define PCI_GLB_STAT_CTRL_IPG_TO_PCI_CLK_MASK 0x7 -#define PCI_GLB_STAT_CTRL_PEE_SHIFT 13 -#define PCI_GLB_STAT_CTRL_SEE_SHIFT 12 -#define PCI_GLB_STAT_CTRL_PR_SHIFT 0 - -#define PCI_GLB_STAT_CTRL_PE (1<<PCI_GLB_STAT_CTRL_PE_SHIFT) -#define PCI_GLB_STAT_CTRL_SE (1<<PCI_GLB_STAT_CTRL_SE_SHIFT) -#define PCI_GLB_STAT_CTRL_PEE (1<<PCI_GLB_STAT_CTRL_PEE_SHIFT) -#define PCI_GLB_STAT_CTRL_SEE (1<<PCI_GLB_STAT_CTRL_SEE_SHIFT) -#define PCI_GLB_STAT_CTRL_PR (1<<PCI_GLB_STAT_CTRL_PR_SHIFT) - -/* PCI Target Control Register (PCITCR) */ -#define PCI_TARGET_CTRL_LD_SHIFT 24 -#define PCI_TARGET_CTRL_P_SHIFT 16 - -#define PCI_TARGET_CTRL_LD (1<<PCI_TARGET_CTRL_LD_SHIFT) -#define PCI_TARGET_CTRL_P (1<<PCI_TARGET_CTRL_P_SHIFT) - -/* PCI Initiator Window Configuration Register (PCIIWCR) */ -#define PCI_INIT_WIN_CFG_WIN0_CTRL_IO_SHIFT 27 -#define PCI_INIT_WIN_CFG_WIN0_CTRL_PRC_SHIFT 25 -#define PCI_INIT_WIN_CFG_WIN0_CTRL_PRC_MASK 0x3 -#define PCI_INIT_WIN_CFG_WIN0_CTRL_EN_SHIFT 24 -#define PCI_INIT_WIN_CFG_WIN1_CTRL_IO_SHIFT 19 -#define PCI_INIT_WIN_CFG_WIN1_CTRL_PRC_SHIFT 17 -#define PCI_INIT_WIN_CFG_WIN1_CTRL_PRC_MASK 0x3 -#define PCI_INIT_WIN_CFG_WIN1_CTRL_EN_SHIFT 16 -#define PCI_INIT_WIN_CFG_WIN2_CTRL_IO_SHIFT 11 -#define PCI_INIT_WIN_CFG_WIN2_CTRL_PRC_SHIFT 9 -#define PCI_INIT_WIN_CFG_WIN2_CTRL_PRC_MASK 0x3 -#define PCI_INIT_WIN_CFG_WIN2_CTRL_EN_SHIFT 8 - -#define PCI_INIT_WIN_CFG_WIN_MEM_READ 0x0 -#define PCI_INIT_WIN_CFG_WIN_MEM_READ_LINE 0x1 -#define PCI_INIT_WIN_CFG_WIN_MEM_READ_MULTIPLE 0x2 - -#define PCI_INIT_WIN_CFG_WIN0_CTRL_IO (1<<PCI_INIT_WIN_CFG_WIN0_CTRL_IO_SHIFT) -#define PCI_INIT_WIN_CFG_WIN0_CTRL_EN (1<<PCI_INIT_WIN_CFG_WIN0_CTRL_EN_SHIFT) -#define PCI_INIT_WIN_CFG_WIN1_CTRL_IO (1<<PCI_INIT_WIN_CFG_WIN1_CTRL_IO_SHIFT) -#define PCI_INIT_WIN_CFG_WIN1_CTRL_EN (1<<PCI_INIT_WIN_CFG_WIN1_CTRL_EN_SHIFT) -#define PCI_INIT_WIN_CFG_WIN2_CTRL_IO (1<<PCI_INIT_WIN_CFG_WIN2_CTRL_IO_SHIFT) -#define PCI_INIT_WIN_CFG_WIN2_CTRL_EN (1<<PCI_INIT_WIN_CFG_WIN2_CTRL_EN_SHIFT) - -/* PCI Initiator Control Register (PCIICR) */ -#define PCI_INIT_CTRL_REE_SHIFT 26 -#define PCI_INIT_CTRL_IAE_SHIFT 25 -#define PCI_INIT_CTRL_TAE_SHIFT 24 -#define PCI_INIT_CTRL_MAX_RETRIES_SHIFT 0 -#define PCI_INIT_CTRL_MAX_RETRIES_MASK 0xff - -#define PCI_INIT_CTRL_REE (1<<PCI_INIT_CTRL_REE_SHIFT) -#define PCI_INIT_CTRL_IAE (1<<PCI_INIT_CTRL_IAE_SHIFT) -#define PCI_INIT_CTRL_TAE (1<<PCI_INIT_CTRL_TAE_SHIFT) - -/* PCI Status/Command Register (PCISCR) - PCI Dword 1 */ -#define PCI_STAT_CMD_PE_SHIFT 31 -#define PCI_STAT_CMD_SE_SHIFT 30 -#define PCI_STAT_CMD_MA_SHIFT 29 -#define PCI_STAT_CMD_TR_SHIFT 28 -#define PCI_STAT_CMD_TS_SHIFT 27 -#define PCI_STAT_CMD_DT_SHIFT 25 -#define PCI_STAT_CMD_DT_MASK 0x3 -#define PCI_STAT_CMD_DP_SHIFT 24 -#define PCI_STAT_CMD_FC_SHIFT 23 -#define PCI_STAT_CMD_R_SHIFT 22 -#define PCI_STAT_CMD_66M_SHIFT 21 -#define PCI_STAT_CMD_C_SHIFT 20 -#define PCI_STAT_CMD_F_SHIFT 9 -#define PCI_STAT_CMD_S_SHIFT 8 -#define PCI_STAT_CMD_ST_SHIFT 7 -#define PCI_STAT_CMD_PER_SHIFT 6 -#define PCI_STAT_CMD_V_SHIFT 5 -#define PCI_STAT_CMD_MW_SHIFT 4 -#define PCI_STAT_CMD_SP_SHIFT 3 -#define PCI_STAT_CMD_B_SHIFT 2 -#define PCI_STAT_CMD_M_SHIFT 1 -#define PCI_STAT_CMD_IO_SHIFT 0 - -#define PCI_STAT_CMD_PE (1<<PCI_STAT_CMD_PE_SHIFT) -#define PCI_STAT_CMD_SE (1<<PCI_STAT_CMD_SE_SHIFT) -#define PCI_STAT_CMD_MA (1<<PCI_STAT_CMD_MA_SHIFT) -#define PCI_STAT_CMD_TR (1<<PCI_STAT_CMD_TR_SHIFT) -#define PCI_STAT_CMD_TS (1<<PCI_STAT_CMD_TS_SHIFT) -#define PCI_STAT_CMD_DP (1<<PCI_STAT_CMD_DP_SHIFT) -#define PCI_STAT_CMD_FC (1<<PCI_STAT_CMD_FC_SHIFT) -#define PCI_STAT_CMD_R (1<<PCI_STAT_CMD_R_SHIFT) -#define PCI_STAT_CMD_66M (1<<PCI_STAT_CMD_66M_SHIFT) -#define PCI_STAT_CMD_C (1<<PCI_STAT_CMD_C_SHIFT) -#define PCI_STAT_CMD_F (1<<PCI_STAT_CMD_F_SHIFT) -#define PCI_STAT_CMD_S (1<<PCI_STAT_CMD_S_SHIFT) -#define PCI_STAT_CMD_ST (1<<PCI_STAT_CMD_ST_SHIFT) -#define PCI_STAT_CMD_PER (1<<PCI_STAT_CMD_PER_SHIFT) -#define PCI_STAT_CMD_V (1<<PCI_STAT_CMD_V_SHIFT) -#define PCI_STAT_CMD_MW (1<<PCI_STAT_CMD_MW_SHIFT) -#define PCI_STAT_CMD_SP (1<<PCI_STAT_CMD_SP_SHIFT) -#define PCI_STAT_CMD_B (1<<PCI_STAT_CMD_B_SHIFT) -#define PCI_STAT_CMD_M (1<<PCI_STAT_CMD_M_SHIFT) -#define PCI_STAT_CMD_IO (1<<PCI_STAT_CMD_IO_SHIFT) - -/* PCI Configuration 1 Register (PCICR1) - PCI Dword 3 */ -#define PCI_CFG1_HT_SHIFT 16 -#define PCI_CFG1_HT_MASK 0xff -#define PCI_CFG1_LT_SHIFT 8 -#define PCI_CFG1_LT_MASK 0xff -#define PCI_CFG1_CLS_SHIFT 0 -#define PCI_CFG1_CLS_MASK 0xf - -/* function prototypes */ -void loadtask(int basetask, int tasks); -u32 dramSetup(void); - -#if defined(CONFIG_PSC_CONSOLE) -int psc_serial_init (void); -void psc_serial_putc(const char c); -void psc_serial_puts (const char *s); -int psc_serial_getc(void); -int psc_serial_tstc(void); -void psc_serial_setbrg(void); -#endif - -#if defined (CONFIG_EXTUART_CONSOLE) -int ext_serial_init (void); -void ext_serial_putc(const char c); -void ext_serial_puts (const char *s); -int ext_serial_getc(void); -int ext_serial_tstc(void); -void ext_serial_setbrg(void); -#endif - -#endif /* __ASSEMBLY__ */ - -#endif /* __MPC8220_H__ */ diff --git a/include/mtd/cfi_flash.h b/include/mtd/cfi_flash.h index 966b5e00ca..b644b91773 100644 --- a/include/mtd/cfi_flash.h +++ b/include/mtd/cfi_flash.h @@ -129,12 +129,16 @@ typedef union { } cfiword_t; /* CFI standard query structure */ +/* The offsets and sizes of this packed structure members correspond + * to the actual layout in CFI Flash chips. Some 16- and 32-bit members + * are unaligned and must be accessed with explicit unaligned access macros. + */ struct cfi_qry { u8 qry[3]; - u16 p_id; - u16 p_adr; - u16 a_id; - u16 a_adr; + u16 p_id; /* unaligned */ + u16 p_adr; /* unaligned */ + u16 a_id; /* unaligned */ + u16 a_adr; /* unaligned */ u8 vcc_min; u8 vcc_max; u8 vpp_min; @@ -148,10 +152,10 @@ struct cfi_qry { u8 block_erase_timeout_max; u8 chip_erase_timeout_max; u8 dev_size; - u16 interface_desc; - u16 max_buf_write_size; + u16 interface_desc; /* aligned */ + u16 max_buf_write_size; /* aligned */ u8 num_erase_regions; - u32 erase_region_info[NUM_ERASE_REGIONS]; + u32 erase_region_info[NUM_ERASE_REGIONS]; /* unaligned */ } __attribute__((packed)); struct cfi_pri_hdr { diff --git a/include/netdev.h b/include/netdev.h index 516b351ebe..df454b50c3 100644 --- a/include/netdev.h +++ b/include/netdev.h @@ -77,7 +77,6 @@ int mcdmafec_initialize(bd_t *bis); int mcffec_initialize(bd_t *bis); int mpc512x_fec_initialize(bd_t *bis); int mpc5xxx_fec_initialize(bd_t *bis); -int mpc8220_fec_initialize(bd_t *bis); int mpc82xx_scc_enet_initialize(bd_t *bis); int mvgbe_initialize(bd_t *bis); int natsemi_initialize(bd_t *bis); diff --git a/include/phy.h b/include/phy.h index 7b4ce744e1..75bf3b4728 100644 --- a/include/phy.h +++ b/include/phy.h @@ -52,6 +52,7 @@ typedef enum { PHY_INTERFACE_MODE_MII, PHY_INTERFACE_MODE_GMII, PHY_INTERFACE_MODE_SGMII, + PHY_INTERFACE_MODE_QSGMII, PHY_INTERFACE_MODE_TBI, PHY_INTERFACE_MODE_RMII, PHY_INTERFACE_MODE_RGMII, @@ -67,6 +68,7 @@ static const char *phy_interface_strings[] = { [PHY_INTERFACE_MODE_MII] = "mii", [PHY_INTERFACE_MODE_GMII] = "gmii", [PHY_INTERFACE_MODE_SGMII] = "sgmii", + [PHY_INTERFACE_MODE_QSGMII] = "qsgmii", [PHY_INTERFACE_MODE_TBI] = "tbi", [PHY_INTERFACE_MODE_RMII] = "rmii", [PHY_INTERFACE_MODE_RGMII] = "rgmii", diff --git a/include/ppc_asm.tmpl b/include/ppc_asm.tmpl index 2db4784d3b..c0f8cc8567 100644 --- a/include/ppc_asm.tmpl +++ b/include/ppc_asm.tmpl @@ -175,7 +175,7 @@ #define IM_IMMR (IM_REGBASE+0x01a8) #define IM_SCCR (IM_REGBASE+0x0c80) -#elif defined(CONFIG_MPC5xxx) || defined(CONFIG_MPC8220) +#elif defined(CONFIG_MPC5xxx) #define HID0_ICE_BITPOS 16 #define HID0_DCE_BITPOS 17 diff --git a/include/usb.h b/include/usb.h index d79c865884..d7b082d9f4 100644 --- a/include/usb.h +++ b/include/usb.h @@ -76,6 +76,12 @@ struct usb_interface { unsigned char act_altsetting; struct usb_endpoint_descriptor ep_desc[USB_MAXENDPOINTS]; + /* + * Super Speed Device will have Super Speed Endpoint + * Companion Descriptor (section 9.6.7 of usb 3.0 spec) + * Revision 1.0 June 6th 2011 + */ + struct usb_ss_ep_comp_descriptor ss_ep_comp_desc[USB_MAXENDPOINTS]; } __attribute__ ((packed)); /* Configuration information.. */ diff --git a/include/usb_defs.h b/include/usb_defs.h index 9502544b21..4f3601a16c 100644 --- a/include/usb_defs.h +++ b/include/usb_defs.h @@ -150,6 +150,18 @@ #define USB_REQ_SET_IDLE 0x0A #define USB_REQ_SET_PROTOCOL 0x0B +/* Device features */ +#define USB_FEAT_HALT 0x00 +#define USB_FEAT_WAKEUP 0x01 +#define USB_FEAT_TEST 0x02 + +/* Test modes */ +#define USB_TEST_MODE_J 0x01 +#define USB_TEST_MODE_K 0x02 +#define USB_TEST_MODE_SE0_NAK 0x03 +#define USB_TEST_MODE_PACKET 0x04 +#define USB_TEST_MODE_FORCE_ENABLE 0x05 + /* "pipe" definitions */ @@ -208,6 +220,18 @@ #define USB_PORT_FEAT_C_SUSPEND 18 #define USB_PORT_FEAT_C_OVER_CURRENT 19 #define USB_PORT_FEAT_C_RESET 20 +#define USB_PORT_FEAT_TEST 21 + +/* + * Changes to Port feature numbers for Super speed, + * from USB 3.0 spec Table 10-8 + */ +#define USB_SS_PORT_FEAT_U1_TIMEOUT 23 +#define USB_SS_PORT_FEAT_U2_TIMEOUT 24 +#define USB_SS_PORT_FEAT_C_LINK_STATE 25 +#define USB_SS_PORT_FEAT_C_CONFIG_ERROR 26 +#define USB_SS_PORT_FEAT_BH_RESET 28 +#define USB_SS_PORT_FEAT_C_BH_RESET 29 /* wPortStatus bits */ #define USB_PORT_STAT_CONNECTION 0x0001 @@ -218,9 +242,19 @@ #define USB_PORT_STAT_POWER 0x0100 #define USB_PORT_STAT_LOW_SPEED 0x0200 #define USB_PORT_STAT_HIGH_SPEED 0x0400 /* support for EHCI */ -#define USB_PORT_STAT_SPEED \ +#define USB_PORT_STAT_SUPER_SPEED 0x0600 /* faking support to XHCI */ +#define USB_PORT_STAT_SPEED_MASK \ (USB_PORT_STAT_LOW_SPEED | USB_PORT_STAT_HIGH_SPEED) +/* + * Changes to wPortStatus bit field in USB 3.0 + * See USB 3.0 spec Table 10-11 + */ +#define USB_SS_PORT_STAT_LINK_STATE 0x01e0 +#define USB_SS_PORT_STAT_POWER 0x0200 +#define USB_SS_PORT_STAT_SPEED 0x1c00 +#define USB_SS_PORT_STAT_SPEED_5GBPS 0x0000 + /* wPortChange bits */ #define USB_PORT_STAT_C_CONNECTION 0x0001 #define USB_PORT_STAT_C_ENABLE 0x0002 @@ -228,13 +262,21 @@ #define USB_PORT_STAT_C_OVERCURRENT 0x0008 #define USB_PORT_STAT_C_RESET 0x0010 +/* + * Changes to wPortChange bit fields in USB 3.0 + * See USB 3.0 spec Table 10-12 + */ +#define USB_SS_PORT_STAT_C_BH_RESET 0x0020 +#define USB_SS_PORT_STAT_C_LINK_STATE 0x0040 +#define USB_SS_PORT_STAT_C_CONFIG_ERROR 0x0080 + /* wHubCharacteristics (masks) */ #define HUB_CHAR_LPSM 0x0003 #define HUB_CHAR_COMPOUND 0x0004 #define HUB_CHAR_OCPM 0x0018 /* - *Hub Status & Hub Change bit masks + * Hub Status & Hub Change bit masks */ #define HUB_STATUS_LOCAL_POWER 0x0001 #define HUB_STATUS_OVERCURRENT 0x0002 diff --git a/include/watchdog.h b/include/watchdog.h index 97ec186be3..d95e4b164d 100644 --- a/include/watchdog.h +++ b/include/watchdog.h @@ -108,8 +108,7 @@ int init_func_watchdog_reset(void); void reset_4xx_watchdog(void); #endif -/* Freescale i.MX */ -#if defined(CONFIG_IMX_WATCHDOG) && !defined(__ASSEMBLY__) +#if defined(CONFIG_HW_WATCHDOG) && !defined(__ASSEMBLY__) void hw_watchdog_init(void); #endif #endif /* _WATCHDOG_H_ */ |