summaryrefslogtreecommitdiff
path: root/arch/arm/mach-socfpga/include
AgeCommit message (Collapse)Author
2020-02-05ddr: altera: Add DDR2 support to Gen5 driverMarek Vasut
Add DDR2 support to Gen5 DRAM driver. As the DDR2 macro names generated by Quartus are named differently than the DDR3 ones, use anon unions to store them in the same structures, without growing their size. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Ley Foon Tan <ley.foon.tan@intel.com> Cc: Simon Goldschmidt <simon.k.r.goldschmidt@gmail.com>
2020-01-07arm: socfpga: stratix10: Enable SMMU accessThor Thayer
Enable TCU access through the Stratix10 CCU so that the SMMU can access the SDRAM. Signed-off-by: Thor Thayer <thor.thayer@linux.intel.com> Reviewed-by: Ley Foon Tan <ley.foon.tan@intel.com>
2020-01-07arm: agilex: Add clock handoff offset for AgilexLey Foon Tan
Add clock handoff offset for Agilex. Remove S10 prefix to avoid confusion. Signed-off-by: Ley Foon Tan <ley.foon.tan@intel.com> Reviewed-by: Simon Goldschmidt <simon.k.r.goldschmidt@gmail.com>
2020-01-07arm: socfpga: agilex: Add clock wrapper functionsLey Foon Tan
Add clock wrapper functions call to clock DM functions to get clock frequency and used in cm_print_clock_quick_summary(). Signed-off-by: Ley Foon Tan <ley.foon.tan@intel.com> Reviewed-by: Simon Goldschmidt <simon.k.r.goldschmidt@gmail.com>
2020-01-07arm: socfpga: Fix CLKMGR_INTOSC_HZ to 400MHzLey Foon Tan
CLKMGR_INTOSC_HZ should be 400MHz, instead of 460MHz. Removed also unused macros CLKMGR_EOSC1_HZ and CLKMGR_FPGA_CLK_HZ. Signed-off-by: Ley Foon Tan <ley.foon.tan@intel.com> Reviewed-by: Simon Goldschmidt <simon.k.r.goldschmidt@gmail.com>
2020-01-07arm: socfpga: Move Stratix10 and Agilex clock manager common codeLey Foon Tan
Move Stratix10 and Agilex clock manager common code to new header file. Signed-off-by: Ley Foon Tan <ley.foon.tan@intel.com> Reviewed-by: Simon Goldschmidt <simon.k.r.goldschmidt@gmail.com>
2020-01-07arm: socfpga: agilex: Add system manager supportLey Foon Tan
Add system manager support for Agilex. Signed-off-by: Ley Foon Tan <ley.foon.tan@intel.com> Reviewed-by: Simon Goldschmidt <simon.k.r.goldschmidt@gmail.com>
2020-01-07arm: socfpga: Move Stratix10 and Agilex system manager common codeLey Foon Tan
Move Stratix10 and Agilex system manager common code to system_manager_soc64.h. Changed macros to use SYSMGR_SOC64_*. Signed-off-by: Ley Foon Tan <ley.foon.tan@intel.com> Reviewed-by: Simon Goldschmidt <simon.k.r.goldschmidt@gmail.com>
2020-01-07arm: socfpga: agilex: Add reset manager supportLey Foon Tan
Add reset manager support for Agilex. Signed-off-by: Ley Foon Tan <ley.foon.tan@intel.com> Reviewed-by: Simon Goldschmidt <simon.k.r.goldschmidt@gmail.com>
2020-01-07arm: socfpga: Move Stratix10 and Agilex reset manager common codeLey Foon Tan
Move Stratix10 and Agilex reset manager common code to reset_manager_soc64.h. Changed macros to RSTMGR_SOC64_*. Remove unused RSTMGR_XXX defines. Signed-off-by: Ley Foon Tan <ley.foon.tan@intel.com> Reviewed-by: Simon Goldschmidt <simon.k.r.goldschmidt@gmail.com>
2020-01-07arm: socfpga: Move firewall code to firewall fileLey Foon Tan
Move firewall related code to new firewall.c, to share code in Stratix 10 and Agilex. SDMMC will transfer data to OCRAM in SPL. So, enable privilege for SDMMC to allow DMA transfer to OCRAM. Signed-off-by: Ley Foon Tan <ley.foon.tan@intel.com> Reviewed-by: Simon Goldschmidt <simon.k.r.goldschmidt@gmail.com>
2020-01-07arm: socfpga: agilex: Add base address for Intel Agilex SoCLey Foon Tan
Add base address for Intel Agilex SoC. Reuse base_addr_s10.h for Agilex, only one base address is different from S10. Signed-off-by: Ley Foon Tan <ley.foon.tan@intel.com> Reviewed-by: Simon Goldschmidt <simon.k.r.goldschmidt@gmail.com>
2020-01-07arm: socfpga: Convert clock manager from struct to definesLey Foon Tan
Convert clock manager for Gen5, Arria 10 and Stratix 10 from struct to defines. Change to get clock manager base address from DT node instead of using #define. Signed-off-by: Ley Foon Tan <ley.foon.tan@intel.com> Reviewed-by: Simon Goldschmidt <simon.k.r.goldschmidt@gmail.com>
2020-01-07arm: socfpga: Convert system manager from struct to definesLey Foon Tan
Convert system manager for Gen5, Arria 10 and Stratix 10 from struct to defines. Change to get system manager base address from DT node instead of using #define. Signed-off-by: Ley Foon Tan <ley.foon.tan@intel.com> Reviewed-by: Simon Goldschmidt <simon.k.r.goldschmidt@gmail.com>
2020-01-07arm: socfpga: Convert reset manager from struct to definesLey Foon Tan
Convert reset manager for Gen5, Arria 10 and Stratix 10 from struct to defines. Change to get reset manager base address from DT node instead of using #define. spl_early_init() initializes the DT setup. So, move spl_early_init() to beginning of function and before get base address from DT. Signed-off-by: Ley Foon Tan <ley.foon.tan@intel.com> Reviewed-by: Simon Goldschmidt <simon.k.r.goldschmidt@gmail.com>
2019-11-20socfpga: fix include guard in misc.h (arch vs. global)Simon Goldschmidt
The file arch/arm/mach-socfpga/include/mach/misc.h used the same include guard as the global include/misc.h. Fix this by giving the arch file an arch prefix. Signed-off-by: Simon Goldschmidt <simon.k.r.goldschmidt@gmail.com> Reviewed-by: Ley Foon Tan <ley.foon.tan@intel.com>
2019-07-21arm: socfpga: rst: add register definition for cold resetSimon Goldschmidt
This adds a define for the bit in rstmgr's ctrl regiser that issues a cold reset (we had a define for the warm reset bit only) in preparation for a proper sysrese driver. Signed-off-by: Simon Goldschmidt <simon.k.r.goldschmidt@gmail.com> Series changes: 2 - separate this patch to the register descriptions from the actual sysreset driver patch
2019-05-24ARM: socfpga: Pull PL310 clearing into common codeMarek Vasut
Pull the PL310 clearing code into common code, so it can be reused by Arria10. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Chin Liang See <chin.liang.see@intel.com> Cc: Dalon Westergreen <dwesterg@gmail.com> Cc: Dinh Nguyen <dinguyen@kernel.org> Cc: Simon Goldschmidt <simon.k.r.goldschmidt@gmail.com> Cc: Tien Fong Chee <tien.fong.chee@intel.com>
2019-05-14arm: sofcpga: s10: remove unused ad-hoc reset codeSimon Goldschmidt
The stratix 10 reset manager ad-hoc code in arch/arm contains an unused function 'reset_deassert_peripherals_handoff' that has been added from the beginning. As this is probably a result of copying the gen5 reset manager and this function has never been used, remove it. Signed-off-by: Simon Goldschmidt <simon.k.r.goldschmidt@gmail.com>
2019-05-14arm: socfpga: remove re-added ad-hoc reset codeSimon Goldschmidt
commit c5de2b7eae68 ("arm: socfpga: implement proper peripheral reset") has removed the call to 'reset_deassert_peripherals_handoff()' from socfpga gen5 SPL since the reset driver now handles resets. However, commit c1d4b464c8b8 ("ARM: socfpga: Disable bridges in SPL unless booting from FPGA") has re-added this ad-hoc reset code, so that all peripherals were now again enabled instead of letting the drivers enable them by request. While at it, remove this function for gen5 as it should not be used. Fixes: commit c1d4b464c8b8 ("ARM: socfpga: Disable bridges in SPL unless booting from FPGA") Signed-off-by: Simon Goldschmidt <simon.k.r.goldschmidt@gmail.com>
2019-05-10spl: socfpga: Implement fpga bitstream loading with socfpga loadfsTien Fong Chee
Add support for loading FPGA bitstream to get DDR up running before U-Boot is loaded into DDR. Boot device initialization, generic firmware loader and SPL FAT support are required for this whole mechanism to work. Signed-off-by: Tien Fong Chee <tien.fong.chee@intel.com>
2019-05-10ARM: socfpga: Add FPGA drivers for Arria 10 FPGA bitstream loadingTien Fong Chee
Add FPGA driver to support program FPGA with FPGA bitstream loading from filesystem. The driver are designed based on generic firmware loader framework. The driver can handle FPGA program operation from loading FPGA bitstream in flash to memory and then to program FPGA. Signed-off-by: Tien Fong Chee <tien.fong.chee@intel.com>
2019-05-06ARM: socfpga: stratix10: Disable FPGA2SOC resetAng, Chee Hong
Software must never reset FPGA2SOC bridge. This bridge must only be reset by POR/COLD/WARM reset. Asserting the FPGA2SOC reset by software can cause the SoC to lock-up if there are traffics being drived into FPGA2SOC bridge. Signed-off-by: Ang, Chee Hong <chee.hong.ang@intel.com>
2019-05-06arm: socfpga: Move Stratix 10 SDRAM driver to DMLey Foon Tan
Convert Stratix 10 SDRAM driver to device model. Get rid of call to socfpga_per_reset() and use reset framework. SPL is changed from calling function in SDRAM driver directly to just probing UCLASS_RAM. Move sdram_s10.h from arch to driver/ddr/altera directory. Signed-off-by: Ley Foon Tan <ley.foon.tan@intel.com>
2019-04-29ARM: socfpga: Add support for selecting bridges in bridge commandMarek Vasut
Add optional "mask" argument to the SoCFPGA bridge command, to select which bridges should be enabled/disabled. This allows the user to avoid enabling bridges which are not connected into the FPGA fabric. Default behavior is to enable/disable all bridges. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Chin Liang See <chin.liang.see@intel.com> Cc: Dinh Nguyen <dinguyen@kernel.org> Cc: Simon Goldschmidt <simon.k.r.goldschmidt@gmail.com> Cc: Tien Fong Chee <tien.fong.chee@intel.com>
2019-04-29ARM: socfpga: Factor out handoff register configurationMarek Vasut
Factor out the code for programming preloader handoff register values, the ISWGRP Handoff 0 and 1. These registers later control which bridges are enabled by the "bridge" command on Gen5 devices. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Chin Liang See <chin.liang.see@intel.com> Cc: Dinh Nguyen <dinguyen@kernel.org> Cc: Simon Goldschmidt <simon.k.r.goldschmidt@gmail.com> Cc: Tien Fong Chee <tien.fong.chee@intel.com>
2019-04-17ddr: altera: Stratix10: Add ECC memory scrubbingLey Foon Tan
Scrub memory content if ECC is enabled and it is not from warm reset boot. Enable icache and dcache before scrub memory and use "DC ZVA" instruction to clear memory to zeros. This instruction writes a cache line at a time and it can prevent false ECC error trigger if write cache line partially. Signed-off-by: Ley Foon Tan <ley.foon.tan@intel.com>
2019-04-17arm: socfpga: stratix10: Add cpu_has_been_warmreset()Ley Foon Tan
Add helper function cpu_has_been_warmreset() to check if CPU is from warm reset boot. Signed-off-by: Ley Foon Tan <ley.foon.tan@intel.com>
2019-04-17arm: socfpga: move gen5 SDR driver to DMSimon Goldschmidt
To clean up reset handling for socfpga gen5, port the DDR driver to DM using UCLASS_RAM and implement proper reset handling. This gets us rid of one ad-hoc call to socfpga_per_reset(). The gen5 driver is implemented in 2 distinct files. One of it (containing the calibration training) is not touched much and is kept at using hard coded addresses since the code grows even more otherwise. SPL is changed from calling hard into the DDR driver code to just probing UCLASS_RESET and UCLASS_RAM. It is happy after finding a RAM driver after that. Signed-off-by: Simon Goldschmidt <simon.k.r.goldschmidt@gmail.com>
2019-02-18arm: socfpga: gen5: remove hacked ETH RST handlingSimon Goldschmidt
The 'dwmac_socfpga' ETH driver can now get the MACs out of reset via the socfpga reset driver and can set PHY mode via syscon. This means we can now remove the ad-hoc code to do this from arch/arm/mach-socfpga. Signed-off-by: Simon Goldschmidt <simon.k.r.goldschmidt@gmail.com>
2018-12-20arm: socfpga: stratix10: Add Stratix10 FPGA into FPGA device tableAng, Chee Hong
Enable 'fpga' command in u-boot. User will be able to use the FPGA command to program the FPGA on Stratix10 SoC. Signed-off-by: Ang, Chee Hong <chee.hong.ang@intel.com>
2018-12-20arm: socfpga: stratix10: Add macros for mailbox's argumentsAng, Chee Hong
Add macros for specifying number of arguments in mailbox command. Signed-off-by: Ang, Chee Hong <chee.hong.ang@intel.com>
2018-12-20arm: socfpga: stratix10: Add generic FPGA reconfig mailbox API for S10Ang, Chee Hong
Add a generic mailbox API for FPGA reconfig status which can be called by others. This new function accepts 2 different mailbox commands: CONFIG_STATUS or RECONFIG_STATUS. Signed-off-by: Ang, Chee Hong <chee.hong.ang@intel.com>
2018-11-29arm: socfpga: fix SPL booting from fpga OnChip RAMSimon Goldschmidt
This patch prevents disabling the FPGA bridges when SPL or U-Boot is executed from FPGA onchip RAM. Signed-off-by: Simon Goldschmidt <simon.k.r.goldschmidt@gmail.com>
2018-10-03arm: socfpga: Remove unused function socfpga_emac_manage_reset()Ley Foon Tan
Remove code from the reset manager that is never called. Signed-off-by: Ley Foon Tan <ley.foon.tan@intel.com>
2018-09-15socfpga: stratix10: fix sdram_calculate_sizeDalon Westergreen
Incorrect type of size variable results in 0 being returned for sdram sizes greater than or equal to 4GB. Signed-off-by: Dalon Westergreen <dwesterg@gmail.com>
2018-08-24ARM: socfpga: Reorder Arria10 SPLMarek Vasut
The Arria10 SPL is a complete mess of calls to functions which are called in the wrong context and it is surprise it works at all. This patch tries to clean that mess up by shuffling the function calls around and moving the calls into the correct context. Due to the delicate nature of the reordering, this is done in one huge patch. The following changes happen in this patch: - Security policy init and NIC301 happens first in board_init_f() - The clock init happens very early in board_init_f() in SPL only - arch_early_init_r() only registers the FPGA, just like on Gen5 - arch_early_init_r() is never called from any _f() function - Dedicated FPGA pins are inited in board_init_f() as on Gen5 Signed-off-by: Marek Vasut <marex@denx.de> Cc: Chin Liang See <chin.liang.see@intel.com> Cc: Dinh Nguyen <dinguyen@kernel.org> Cc: Ley Foon Tan <ley.foon.tan@intel.com>
2018-08-15arm: socfpga: Fix SYSMGR_FPGAINTF_EMACx bit maskLey Foon Tan
Bitmask for EMAC should be bit-0, EMAC1 bit-8 and EMAC2 bit-16. Signed-off-by: Ley Foon Tan <ley.foon.tan@intel.com>
2018-08-13ARM: socfpga: clk: Convert to clock frameworkMarek Vasut
Use clock framework functions to fetch clock information now that there is a clock driver for Arria10, instead of custom coded register parsing. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Chin Liang See <chin.liang.see@intel.com> Cc: Dinh Nguyen <dinguyen@kernel.org> Cc: Ley Foon Tan <ley.foon.tan@intel.com>
2018-08-13ARM: socfpga: Zap unused reset codeMarek Vasut
Remove code from the reset manager that is never called. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Chin Liang See <chin.liang.see@intel.com> Cc: Dinh Nguyen <dinguyen@kernel.org> Cc: Ley Foon Tan <ley.foon.tan@intel.com>
2018-08-13ARM: socfpga: Zap all the UART handling complexityMarek Vasut
The UART reset handling is now done via reset framework using the SoCFPGA reset driver. The UART console assignment is done using the DM and console framework. Nuke all this comlexity, since it is just duplicating the same functionality, badly. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Chin Liang See <chin.liang.see@intel.com> Cc: Dinh Nguyen <dinguyen@kernel.org>
2018-08-13arm: socfpga: gen5: combine some init code for SPL and U-BootSimon Goldschmidt
Some of the code for low level system initialization in SPL's board_init_f() and U-Boot's arch_early_init_r() is the same, so let's combine it into a single function called from both. Signed-off-by: Simon Goldschmidt <simon.k.r.goldschmidt@gmail.com>
2018-07-12ddr: altera: stratix10: Add DDR support for Stratix10 SoCLey Foon Tan
Add DDR support for Stratix SoC Signed-off-by: Chin Liang See <chin.liang.see@intel.com> Signed-off-by: Ley Foon Tan <ley.foon.tan@intel.com>
2018-07-12arm: socfpga: stratix10: Add SPL driver for Stratix10 SoCLey Foon Tan
Add SPL driver support for Stratix SoC Signed-off-by: Chin Liang See <chin.liang.see@intel.com> Signed-off-by: Ley Foon Tan <ley.foon.tan@intel.com>
2018-07-12arm: socfpga: stratix10: Add mailbox support for Stratix10 SoCLey Foon Tan
Add mailbox support for Stratix SoC Signed-off-by: Ley Foon Tan <ley.foon.tan@intel.com> Signed-off-by: Chin Liang See <chin.liang.see@intel.com> Reviewed-by: Marek Vasut <marex@denx.de>
2018-07-12arm: socfpga: misc: Move bridge command to misc commonLey Foon Tan
Move bridge command to misc common driver, in preparation to used by other platforms. Signed-off-by: Ley Foon Tan <ley.foon.tan@intel.com>
2018-05-20SPDX: Fixup SPDX tags in a few new filesTom Rini
Signed-off-by: Tom Rini <trini@konsulko.com>
2018-05-18arm: socfpga: stratix10: Add pinmux support for Stratix10 SoCLey Foon Tan
Add pinmux driver support for Stratix SoC Signed-off-by: Chin Liang See <chin.liang.see@intel.com> Signed-off-by: Ley Foon Tan <ley.foon.tan@intel.com>
2018-05-18arm: socfpga: stratix10: Add reset manager driver for Stratix10 SoCLey Foon Tan
Add Reset Manager driver support for Stratix SoC Signed-off-by: Chin Liang See <chin.liang.see@intel.com> Signed-off-by: Ley Foon Tan <ley.foon.tan@intel.com>
2018-05-18arm: socfpga: stratix10: Add clock manager driver for Stratix10 SoCLey Foon Tan
Add Clock Manager driver support for Stratix SoC Signed-off-by: Chin Liang See <chin.liang.see@intel.com> Signed-off-by: Ley Foon Tan <ley.foon.tan@intel.com>
generated by cgit (git 2.34.1) at 2025-01-13 03:53:36 +0000