summaryrefslogtreecommitdiff
path: root/arch/arm
AgeCommit message (Collapse)Author
2018-06-27imx6ul: geam: Fix fdt_file mismatchJagan Teki
fdt_file is looking for imx6ul-geam-kit.dtb but Linux has imx6ul-geam.dtb, since Linux skipped -kit on file name by below commit. "ARM: dts: imx6ul-geam: Skip suffix -kit from dts name" (sha1: 182de5ebce71e469cfa686fcdf08c9cbe11ece97) So, due to this mismatch U-Boot failed to pick the proper dtb which eventually break the Linux boot. This patch fixed this mismatch by - renaming dts files - update config option to use new dtb file - update fdt_file to new dtb file name Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> Reviewed-by: Fabio Estevam <fabio.estevam@nxp.com>
2018-06-27arm: dts: imx7: colibri: add raw NAND supportStefan Agner
Signed-off-by: Stefan Agner <stefan.agner@toradex.com>
2018-06-27arm: dts: imx7: sync with LinuxStefan Agner
Sync with Linux commit 60cc43fc8884 ("Linux 4.17-rc1"). Signed-off-by: Stefan Agner <stefan.agner@toradex.com>
2018-06-18board: Add support for KEY1 status detection on K+P's HSC|DDC boardsLukasz Majewski
This code provides information if the K+P's imx53 boards had KEY1 pressed. Signed-off-by: Lukasz Majewski <lukma@denx.de>
2018-06-18board: imx53: Always disable display before starting kernelLukasz Majewski
This patch prevents from the situation where we may end up with garbage displayed on the LCD panel. Such situation occurs when one performs "reboot -f" in Linux and then stop in U-boot (or observe the garbage on the screen during boot up). To prevent from such situation - the PWM pin is configured as GPIO and set to LOW. Signed-off-by: Lukasz Majewski <lukma@denx.de>
2018-06-18ARM: mxs: let boards override entire dram parameter tableMans Rullgard
If many values differ from the defaults, overriding the full table is simpler and more space efficient than tweaking it through mxs_adjust_memory_params(). Signed-off-by: Mans Rullgard <mans@mansr.com>
2018-06-18imx: Enable ACTLR.SMP bit for all i.MX cortex-a7 platformsYe Li
According to the Cortex-A7 TRM, for ACTLR.SMP bit "You must ensure this bit is set to 1 before the caches and MMU are enabled, or any cache and TLB maintenance operations are performed". ROM sets this bit in normal boot flow, but when in serial download mode, it is not set. Here we add it in u-boot as a common flow for all i.MX cortex-a7 platforms, including mx7d, mx6ul/ull and mx7ulp. Signed-off-by: Ye Li <ye.li@nxp.com> [fabio: adapted to U-Boot mainline codebase and make checkpatch happy] Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com>
2018-06-16Merge branch 'master' of git://git.denx.de/u-boot-usbTom Rini
2018-06-15Merge tag 'xilinx-for-v2018.07-rc2' of git://git.denx.de/u-boot-microblazeTom Rini
Xilinx fixes for v2018.07-rc2 Zynq: - Fix missing watchdog header - DT fixes ZynqMP: - emmc configuration split - Enable SPD - Fix PMUFW_INIT_FILE logic - Coverity fixes in SoC code timer - Add timer_get_boot_us mmc: - Fix MMC HS200 tuning command serial: - Fix scrabled chars with OF_LIVE
2018-06-15arm64: zynqmp: Check return value in zynqmp_mmio_rawwrite()Michal Simek
There should be return value check from zynqmp_mmio_read() in zynqmp_mmio_rawwrite() to make sure that errors are propagated properly. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2018-06-15arm: zynq: Drop #address-cells and #size-cells from gpio-keysMichal Simek
dtc is showing some warnings and this change was also done in the Linux kernel as "Input: gpio-keys - clean up device tree binding example" with this fragment in commit message "Drop #address-cells and #size-cells, which are not required by the gpio-keys binding documentation, as button sub-nodes are not devices." Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2018-06-15arm64: zynqmp: Split emmc configuration into emmc0 and emmc1Siva Durga Prasad Paladugu
This patch splits the current mini emmc configuration into emmc0 and emmc1 configurations because emmc is probed at boot time and on systems which have only one interface mini configuration is failing on unused interface. This patch also adds required clock node in dts and enables CONFIG_MMC_SDHCI_ZYNQ through defconfig. Signed-off-by: Siva Durga Prasad Paladugu <siva.durga.paladugu@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2018-06-14efi_loader: Convert runtime reset from switch to if statementsAlexander Graf
We currently handle the UEFI runtime reset / power off case handling via a switch statement. Compilers (gcc in my case) may opt to handle these via jump tables which they may conveniently put into .rodata which is not part of the runtime section, so it will be unreachable when executed. Fix this by just converting the switch statement into an if/else statement. It produces smaller code that is faster and also correct because we no longer refer .rodata from efi runtime code. Reported-by: Andreas Färber <aferber@suse.de> Signed-off-by: Alexander Graf <agraf@suse.de>
2018-06-13ARM: DTS: resync a3517.dtsi with Linux 4.17Adam Ford
Linux 4.17 was just released with some minor changes to the am3517.dtsi. This patch re-syncs the file. Signed-off-by: Adam Ford <aford173@gmail.com>
2018-06-13ARM64: meson: Sync DT with Linux 4.17Neil Armstrong
Synchronize the Linux Device Tree for Amlogic Meson GX boards from Linux 4.17.0 This will enable USB on Amlogic Meson GXL Boards like Khadas VIM, P212 or LibreTech-CC. Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
2018-06-13sunxi: clock: Fix EHCI and OHCI clocks on A64Vasily Khoruzhick
EHCI0 is bit 24, EHCI1 - 25, OHCI0 - 28, OHCI1 - 29 Fixes commit fef73766d9ad ("sunxi: clock: Fix OHCI clock gating for H3/H5") Signed-off-by: Vasily Khoruzhick <anarsoul@gmail.com>
2018-06-12Merge git://git.denx.de/u-boot-fsl-qoriqTom Rini
2018-06-12arm: mvebu: Add Helios4 Armada 38x initial supportDennis Gilmore
The helios4 is built on the SolidRun Armada 38x SOM. The port os based on the ClearFog board, using information from https://github.com/helios-4/u-boot-marvell as well as dtb input from https://github.com/helios-4/linux-marvell Signed-off-by: Dennis Gilmore <dennis@ausil.us> Signed-off-by: Dennis Gilmore <dgilmore@redhat.com> Signed-off-by: Stefan Roese <sr@denx.de>
2018-06-11LS1012AFRWY: Add Secure Boot supportVinitha V Pillai
Added the following: 1. defconfig for LS1012AFRWY Secure boot 2. PfE Validation support Signed-off-by: Vinitha V Pillai <vinitha.pillai@nxp.com> Reviewed-by: York Sun <york.sun@nxp.com>
2018-06-11board: ls1012a: FRWY-LS1012A board supportBhaskar Upadhaya
FRWY-LS1012A belongs to LS1012A family with features 2 1G SGMII PFE MAC, Micro SD, USB 3.0, DDR, QuadSPI, Audio, UART. Signed-off-by: Bhaskar Upadhaya <Bhaskar.Upadhaya@nxp.com> [yorks: rebase and fix SPDX tag] [yorks: fix board/freescale/ls1012afrdm/Kconfig] Reviewed-by: York Sun <york.sun@nxp.com>
2018-06-08board: Kconfig: Re-Arrangement of PPA firmware and header addressesBhaskar Upadhaya
PPA firmware and header address may vary depending upon different boards, configure ppa firmware and header address in board specific Kconfig. Signed-off-by: Vinitha V Pillai <vinitha.pillai@nxp.com> Signed-off-by: Jagdish Gediya <jagdish.gediya@nxp.com> Signed-off-by: Bhaskar Upadhaya <Bhaskar.Upadhaya@nxp.com> Reviewed-by: York Sun <york.sun@nxp.com>
2018-06-07ARM: orion5x: fix use of callee-saved registers in lowloevel_initMans Rullgard
The lowlevel_init function uses r4 and r6 without preserving their values as required by the AAPCS. Use r0 and r2 instead as these are call-clobbered. Signed-off-by: Mans Rullgard <mans@mansr.com> Reviewed-by: Chris Packham <judge.packham@gmail.com>
2018-06-06Merge branch 'master' of git://git.denx.de/u-boot-samsungTom Rini
2018-06-05mach-stm32: Enable SPL_RESET_SUPPORT flagPatrice Chotard
Since commit 0e373c0ade8c ("spl: add SPL_RESET_SUPPORT"), reset is supported in SPL, enable this flag for STM32F SoCs family. This allows to remove a specific case in RCC mfd driver. Signed-off-by: Patrice Chotard <patrice.chotard@st.com>
2018-06-05ARM: add SBx81LIFKW boardChris Packham
This is a series of line cards for Allied Telesis's SBx8100 chassis switch. The CPU block is common to the SBx81GS24a, SBx81XS6, SBx81XS16 and SBx81GT40 cards collectively referred to as SBx81LIFKW in u-boot. Reviewed-by: Stefan Roese <sr@denx.de> Signed-off-by: Chris Packham <judge.packham@gmail.com> Signed-off-by: Stefan Roese <sr@denx.de>
2018-06-05ARM: kirkwood: remove automatic I2C config if DM_I2C is enabledChris Packham
The mach/config.h file would helpfully define CONFIG_SYS_I2C and CONFIG_SYS_I2C_MVTWSI if CONFIG_CMD_I2C was defined by the board. This conflicts with the way DM_I2C works. As a transitional measure don't automatically define these if CONFIG_DM_I2C is defined. It should be possible to remove this once all kirkwood boards are migrated to DM. Signed-off-by: Chris Packham <judge.packham@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de> Signed-off-by: Stefan Roese <sr@denx.de>
2018-06-05arm: kirkwood: lsxl: Add SPI driver model supportMichael Walle
This patch shows how to enable driver model support for the LS-CHLv2 and LS-XHL boards. There are a couple of open questions: - do I need the u-boot,dm-pre-reloc tags in the device tree? - should mach/config.h define CONFIG_DM_SEQ_ALIAS? - how can we split this patch or are there any other pending patches which does the same and I didn't catch these. This patch is based on the http://git.denx.de/u-boot-marvell.git (master branch) and needs the following patches, which are still pending: https://patchwork.ozlabs.org/patch/909618/ https://patchwork.ozlabs.org/patch/909617/ https://patchwork.ozlabs.org/patch/909973/ Signed-off-by: Michael Walle <michael@walle.cc> Tested-by: Michael Walle <michael@walle.cc> Signed-off-by: Stefan Roese <sr@denx.de>
2018-06-05arm: mvebu: switch clearfog to use device-tree i2c and gpioJon Nettleton
This switches the clearfog boards to use DM based gpio and i2c drivers. The io expanders are configured via their device-tree entries. Signed-off-by: Jon Nettleton <jon@solid-run.com> [baruch: add DT i2c aliases] Signed-off-by: Baruch Siach <baruch@tkos.co.il> Reviewed-by: Chris Packham <judge.packham@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de> Signed-off-by: Stefan Roese <sr@denx.de>
2018-06-05mvebu: a38x: Force receiver detected on PCIe lanesRabeeh Khoury
Some QCA988x based modules presence is not detected by the SERDES lanes, so force this detection which will trigger the LTSSM state machine to negotiate link. An example of such a card is WLE900VX. Signed-off-by: Rabeeh Khoury <rabeeh@solid-run.com> Signed-off-by: Baruch Siach <baruch@tkos.co.il> Tested-by: Chris Packham <judge.packham@gmail.com> Tested-by: Mario Six <mario.six@gdsys.cc> Signed-off-by: Stefan Roese <sr@denx.de>
2018-06-04db410c: Added pre-relocation attribute to pinctrlRamon Fried
u-boot,dm-pre-reloc was missing from pinctrl and it's children node. causing failure to configure pin mux before relocation. Signed-off-by: Ramon Fried <ramon.fried@gmail.com>
2018-06-04Merge branch 'master' of git://git.denx.de/u-boot-sunxiTom Rini
2018-06-04board: sun50i: Add Amarula A64-Relic initial supportJagan Teki
Amarula A64-Relic is A64 based IoT device, which support - Allwinner A64 Cortex-A53 - Mali-400MP2 GPU - AXP803 PMIC - 1GB DDR3 RAM - 8GB eMMC - AP6330 Wifi/BLE - MIPI-DSI - CSI: OV5640 sensor - USB OTG - 12V DC power supply Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> Acked-by: Maxime Ripard <maxime.ripard@bootlin.com>
2018-06-03Define board_quiesce_devices() in a shared locationSimon Glass
This undocumented function relies on arch-specific code to declare a nop weak version. Add the weak function in common code instead to avoid having to duplicate the same function in each arch. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Alexander Graf <agraf@suse.de>
2018-06-03arm: armv7: allow unaligned memory accessHeinrich Schuchardt
The UEFI spec mandates that unaligned memory access should be enabled if supported by the CPU architecture. This patch implements the function unaligned_access() to reset the aligned access flag in the system control register (SCTLR). It is called when the bootefi command is invoked. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de> [agraf: fix SPDX identifier] Signed-off-by: Alexander Graf <agraf@suse.de>
2018-06-02Merge branch 'master' of git://git.denx.de/u-boot-shTom Rini
2018-06-01Merge tag 'xilinx-for-v2018.07-2' of git://www.denx.de/git/u-boot-microblazeTom Rini
Xilinx changes for v2018.07 second pull zynqmp: - Show reset reason - Remove emulation platform - Update pmufw version - Simplify mmc bootmode - Remove dc2 useless configuration file - Cleanup mini config - Defconfig syncup - zcu100, zcu104 and zcu111 dts fixes xilinx: - Use live-tree functions in some drivers - Add support for Avnet Minized and Antminer S9 fpga: - Add secure bitstream loading support mmc: - Add hs200 mode support usb xhci: - Header fix
2018-06-01Merge branch 'master' of git://git.denx.de/u-boot-usbTom Rini
2018-06-01fpga: zynqmp: Add secure bitstream loading for ZynqMPSiva Durga Prasad Paladugu
This patch adds support for loading secure bitstreams on ZynqMP platforms. The secure bitstream images has to be generated using Xilinx bootgen tool. Signed-off-by: Siva Durga Prasad Paladugu <siva.durga.paladugu@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2018-06-01ARM: dts: rmobile: Sync R8A77990 Ebisu DTS with LinuxMarek Vasut
Import the R8A77990 and Ebisu DTS from linux-next to get the latest version. This makes AVB ethernet work in U-Boot since the ethernet node is now present in DT, as well as GPIOs. Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com> Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
2018-06-01ARM: renesas: Add R8A77990 E3 Ebisu boardMarek Vasut
Add support for the R8A77990 Ebisu board. Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com> Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
2018-06-01ARM: dts: rmobile: Add Renesas Ebisu board supportTakeshi Kihara
Basic support for the Renesas Ebisu board based on R-Car E3: - Memory, - Main crystal, - Serial console, Signed-off-by: Takeshi Kihara <takeshi.kihara.df@renesas.com> [shimoda: rebase and add SPDX-License-Identifier] Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com> Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
2018-06-01ARM: dts: rmobile: Add Renesas R8A77990 SoC supportYoshihiro Shimoda
This patch adds basic support for the Renesas R-Car E3 (R8A77990) SoC: - PSCI - CPU (single) - Cache controller - Main clocks and controller - Interrupt controller - Timer - PMU - Reset controller - Product register - System controller - UART for console Inspried by a patch by Takeshi Kihara in the BSP. Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com> Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
2018-06-01ARM: renesas: Add R8A77990 E3 SoC IDMarek Vasut
Add ID and Kconfig entry for the Renesas R8A77990 E3 SoC. Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com> Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
2018-05-31arm64: zynqmp: Add TTC clocksRajan Vaja
PS clock(LPD_APB_CLK) is default clock for TTC. Add this clock entry in TTC nodes. Signed-off-by: Rajan Vaja <rajan.vaja@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2018-05-31arm64: zynqmp: Disable WP on zcu111Michal Simek
On this board there is SD slot without WP connected. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2018-05-31arm64: zynqmp: Remove broken-cd from zcu100-revCMichal Simek
Card detect bit was broken on revA and it is working fine with revC board that's why this property can be removed. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2018-05-31arm64: zynqmp: Fix address for tca6416_u97 chip on zcu104Michal Simek
I2c address is not 0x21 but 0x20. This patch is fixing both revA and revC boards. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2018-05-31arm64: zynqmp: Add ina226 to zcu104 revCMichal Simek
Add new ina226 chip present on i2c bus which wasn't on revA. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2018-05-31arm: zynq: Add support for Bitmain Antminer S9 control boardEzequiel Garcia
This is control board on Bitmain Antminer S9. There are 3 board variables with 256MB, 512MB and 1024MB DDR. DDR memory is automatically detected with using get_with using get_ram_size(). Bitmain is using 16MB space for FPGA which is handled via reserved-memory. Also U-Boot is allocating 16B for storing bootcounts. Watchdog is started but never service in U-Boot. SPL MMC is working. SPL NAND is not working because it is not supported as of now. Signed-off-by: Ezequiel Garcia <ezequiel@vanguardiasur.com.ar> Signed-off-by: Michal Simek <monstr@monstr.eu> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2018-05-31arm: zynq: Add initial support for Avnet MiniZedIbai Erkiaga
Initial support for Avnet MiniZed board. Tested UART1 (serial console), QSPI(Flash), SDHCI1 (eMMC), USB. Signed-off-by: Ibai Erkiaga <ibai.erkiaga-elorza@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
generated by cgit (git 2.34.1) at 2025-01-04 23:59:59 +0000