summaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)Author
2020-07-27Move eSDHC adapter card identification to board filesYangbo Lu
The eSDHC adapter card identification and multiplexing configuration through FPGA had been implemented in both common mmc driver and fsl_esdhc driver. However it is proper to move these code to board files and do it during board initialization. The FPGA registers are also board specific. This patch is to move eSDHC adapter card identification and multiplexing configuration from mmc driver to specific board files. And the option CONFIG_FSL_ESDHC_ADAPTER_IDENT is no longer needed. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> [Rebased, Removed T1040QDS change as board does not exist] Signed-off-by: Priyanka Jain <priyanka.jain@nxp.com>
2020-07-27Drop global data sdhc_adapter for powerpcYangbo Lu
The sdhc_adapter of global data has not been used, and we do not have to use it as global data even we may need it in the future. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Reviewed-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2020-07-27armv8: ls1012a: RGMII ports require internal delayChaitanya Sakinam
The correct setting for the RGMII ports on LS1012ARDB is to enable delay on both Rx and Tx so the interface mode used should be PHY_INTERFACE_MODE_RGMII_ID Signed-off-by: Chaitanya Sakinam <chaitanya.sakinam@nxp.com> Signed-off-by: Anji J <anji.jagarlmudi@nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2020-07-27crypto/fsl: fix unaligned accessMichael Walle
On aarch64 running with dcache off, will result in an unaligned access exception: => dcache off => hash sha1 $kernel_addr_r 100 "Synchronous Abort" handler, esr 0x96000061 elr: 00000000960317d8 lr : 00000000960316a4 (reloc) elr: 00000000fbd787d8 lr : 00000000fbd786a4 [..] The compiler emits a "stur x1, [x0, #12]". x1 is might just be 32 bit aligned pointer. Remove the unused u64 element from the union to drop the minimal alignment to 32 bit. Also remove the union, because it is no more needed. Signed-off-by: Michael Walle <michael@walle.cc> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2020-07-27net: pfe_eth: Use spi_flash_read API to access flash memoryKuldeep Singh
Current PFE firmware access spi-nor memory directly. New spi-mem framework does not support direct memory access. So, let's use spi_flash_read API to access memory instead of directly using it. Signed-off-by: Kuldeep Singh <kuldeep.singh@nxp.com> Reviewed-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2020-07-27fsl_dspi: Introduce DT bindings for CS-SCK and SCK-CS delaysVladimir Oltean
Communication with some SPI slaves just won't cut it if these delays (before the beginning, and after the end of a transfer) are not added to the Chip Select signal. These are a straight copy from Linux: Documentation/devicetree/bindings/spi/spi-fsl-dspi.txt drivers/spi/spi-fsl-dspi.c Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> [Rebased] Signed-off-by: Priyanka Jain <priyanka.jain@nxp.com>
2020-07-25treewide: convert devfdt_get_addr() to dev_read_addr()Masahiro Yamada
When you enable CONFIG_OF_LIVE, you will end up with a lot of conversions. To generate this commit, I used coccinelle excluding drivers/core/, include/dm/, and test/ The semantic patch that makes this change is as follows: <smpl> @@ expression dev; @@ -devfdt_get_addr(dev) +dev_read_addr(dev) </smpl> Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2020-07-25treewide: remove (phys_addr_t) casts from devfdt_get_addr()Masahiro Yamada
This cast is unneeded. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2020-07-25treewide: convert (void *)devfdt_get_addr() to dev_read_addr_ptr()Masahiro Yamada
Use the _ptr suffixed variant instead of casting. Also, convert it to dev_read_addr_ptr(), which is safe to CONFIG_OF_LIVE. One curious part is an error check like follows in drivers/watchdog/omap_wdt.c: priv->regs = (struct wd_timer *)devfdt_get_addr(dev); if (!priv->regs) return -EINVAL; devfdt_get_addr() returns FDT_ADDR_T_NONE (i.e. -1) on error. So, this code does not catch any error in DT parsing. dev_read_addr_ptr() returns NULL on error, so this error check will work. I generated this commit by the following command: $ find . -name .git -prune -o -name '*.[ch]' -type f -print | \ xargs sed -i -e 's/([^*)]*\*)devfdt_get_addr(/dev_read_addr_ptr(/' I manually fixed drivers/usb/host/ehci-mx6.c Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2020-07-25dm: soc: Introduce soc_ti_k3 driver for TI K3 SoCsDave Gerlach
Introduce an soc_ti_k3_driver that allows identification and selection of SoC specific data based on the JTAG ID register for device identification, as described for AM65x[0] and J721E[1] devices. [0] http://www.ti.com/lit/ug/spruid7e/spruid7e.pdf [1] http://www.ti.com/lit/ug/spruil1a/spruil1a.pdf Signed-off-by: Dave Gerlach <d-gerlach@ti.com>
2020-07-25test: Add tests for SOC uclassDave Gerlach
Add a sandbox SOC driver, and some tests for the SOC uclass. Reviewed-by: Simon Glass <sjg@chromium.org> Signed-off-by: Dave Gerlach <d-gerlach@ti.com>
2020-07-25dm: soc: Introduce UCLASS_SOC for SOC ID and attribute matchingDave Gerlach
Introduce UCLASS_SOC to be used for SOC identification and attribute matching based on the SoC ID info. This allows drivers to be provided for SoCs to retrieve SoC identifying information and also for matching device attributes for selecting SoC specific data. This is useful for other device drivers that may need different parameters or quirks enabled depending on the specific device variant in use. Reviewed-by: Simon Glass <sjg@chromium.org> Signed-off-by: Dave Gerlach <d-gerlach@ti.com>
2020-07-25cpu: Convert the methods to use a const udevice *Simon Glass
These functions should not modify the device. Convert them to const so that callers don't need to cast if they have a const udevice *. Signed-off-by: Simon Glass <sjg@chromium.org>
2020-07-25net: dc2114x: Add DM supportMarek Vasut
With all the changes in place, add support for DM into the dc2114x driver. Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com> Cc: Joe Hershberger <joe.hershberger@ni.com> Cc: Ramon Fried <rfried.dev@gmail.com>
2020-07-25net: dc2114x: Split common parts of non-DM functions outMarek Vasut
Split the common code from the non-DM code, so it can be reused by the DM code later. As always, the recv() function had to be split into the actual receiving part and free_pkt part to fit with the DM. Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com> Cc: Joe Hershberger <joe.hershberger@ni.com> Cc: Ramon Fried <rfried.dev@gmail.com>
2020-07-25net: dc2114x: Split RX pathMarek Vasut
Split the RX data check from the rest of the RX function, so that the check can be performed separately from the processing of the packet and the release of the received packet once the processing is finished. Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com> Cc: Joe Hershberger <joe.hershberger@ni.com> Cc: Ramon Fried <rfried.dev@gmail.com>
2020-07-25net: dc2114x: Add RX/TX rings into the private dataMarek Vasut
The RX/TX DMA descriptor rings are per-device-instance private data, so move them into the private data. Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com> Cc: Joe Hershberger <joe.hershberger@ni.com> Cc: Ramon Fried <rfried.dev@gmail.com>
2020-07-25net: dc2114x: Pass PCI BDF into phys_to_bus()Marek Vasut
This is a trick in preparation for adding DM support. By passing in the PCI BDF into the phys_to_bus() macros and calling that dev, we can substitute dev with udevice when DM support lands and do minor adjustment to the macros to support both DM and non-DM operation. No functional change. Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com> Cc: Joe Hershberger <joe.hershberger@ni.com> Cc: Ramon Fried <rfried.dev@gmail.com>
2020-07-25net: dc2114x: Pass private data aroundMarek Vasut
This patch replaces the various uses of struct eth_device for accessing device private data with struct dc2114x_priv, which is compatible both with DM and non-DM operation. Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com> Cc: Joe Hershberger <joe.hershberger@ni.com> Cc: Ramon Fried <rfried.dev@gmail.com>
2020-07-25net: dc2114x: Introduce private dataMarek Vasut
Introduce dc2114x_priv, which is a super-structure around eth_device and tracks per-device state and the device IO address. Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com> Cc: Joe Hershberger <joe.hershberger@ni.com> Cc: Ramon Fried <rfried.dev@gmail.com>
2020-07-25net: dc2114x: Use standard I/O accessorsMarek Vasut
The current dc21x4x driver accesses its memory mapped registers directly instead of using the standard I/O accessors. This can cause problems on some systems as the accesses can get out of order. So convert the direct volatile dereferences to use the normal in/out macros. Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com> Cc: Joe Hershberger <joe.hershberger@ni.com> Cc: Ramon Fried <rfried.dev@gmail.com>
2020-07-25net: dc2114x: Drop update_srom()Marek Vasut
This code is never used, remove it. Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com> Cc: Joe Hershberger <joe.hershberger@ni.com> Cc: Ramon Fried <rfried.dev@gmail.com>
2020-07-25net: dc2114x: Add Kconfig entriesMarek Vasut
Add Kconfig entries for the dc2114x driver and convert various boards. Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com> Cc: Joe Hershberger <joe.hershberger@ni.com> Cc: Ramon Fried <rfried.dev@gmail.com>
2020-07-25net: dc2114x: Support all DC2114xMarek Vasut
For the usage in this driver, the chips are identical, so support all of them. Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com> Cc: Joe Hershberger <joe.hershberger@ni.com> Cc: Ramon Fried <rfried.dev@gmail.com>
2020-07-25net: dc2114x: Use PCI_DEVICE() to define PCI device compat listMarek Vasut
Use this macro to fully fill the PCI device ID table. This is mandatory for the DM PCI support, which checks all the fields. Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com> Cc: Joe Hershberger <joe.hershberger@ni.com> Cc: Ramon Fried <rfried.dev@gmail.com>
2020-07-25mmc: renesas-sdhi: Enable support for R8A774A1Adam Ford
The r8a774a1 is compatible with the generic rcar-gen3-sdhi controller. This patch adds the compatibilty flag, to support the SDHI controller. Signed-off-by: Adam Ford <aford173@gmail.com>
2020-07-25pinctrl: renesas: Enable R8A774A1 PFC tablesAdam Ford
The PFC tables for the R8A774A1 are already available, but they not enabled. This patch adds the Kconfig option and builds the corresponding file when PINCTRL_PFC_R8A774A1 is enabled. Signed-off-by: Adam Ford <aford173@gmail.com>
2020-07-25clk: renesas: Add R8A774A1 clock tablesAdam Ford
This sync's the clock tables with the official release from Linux 5.8-RC2 and update r8a774a1_mstp_table from Ref Manual v1.00. Signed-off-by: Adam Ford <aford173@gmail.com>
2020-07-24dm: core Fix long line in device_bind_common()Simon Glass
Fix an over-length line in this function. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2020-07-24Merge https://gitlab.denx.de/u-boot/custodians/u-boot-riscvTom Rini
- Fix SiFive HiFive Unleashed board booting failure problem. - Enable SiFive fu540 PWM driver. - Support SiFive fu540: SPI boot. - Update OpenSBI used for RISC-V CI testing. - Revert "riscv: Allow use of reset drivers". - Revert "Revert "riscv: sifive: fu540: Add gpio-restart support"". - sysreset: syscon: - Don't assume default value for offset and mask property. - Support value property. - qemu: Add syscon reboot and poweroff support. - Fix SIFIVE debug serial dependency. - Fix linking error when building u-boot-spl with no SMP support. - AE350 use fdtdec_get_addr_size_auto_noparent to parse smc reg. - Make memory node available to SPL in hifive-unleashed-a00-u-boot.dtsi - SiFive fu540 avoid using hardcoded ram base and size.
2020-07-24Revert "Merge tag 'dm-pull-20jul20' of git://git.denx.de/u-boot-dm"Tom Rini
This reverts commit 5d3a21df6694ebd66d5c34c9d62a26edc7456fc7, reversing changes made to 56d37f1c564107e27d873181d838571b7d7860e7. Unfortunately this is causing CI failures: https://travis-ci.org/github/trini/u-boot/jobs/711313649 Signed-off-by: Tom Rini <trini@konsulko.com>
2020-07-24ram: sifive: Avoid using hardcoded ram base and sizeBin Meng
At present the SiFive FU540 RAM driver uses hard-coded memory base address and size to initialize the DDR controller. This may not be true when this driver is used on another board based on FU540. Update the driver to read the memory information from DT and use that during the initialization. Signed-off-by: Bin Meng <bin.meng@windriver.com> Reviewed-by: Leo Liang <ycliang@andestech.com> Reviewed-by: Pragnesh Patel <pragnesh.patel@sifive.com>
2020-07-24serial: Fix SIFIVE debug serial dependencyMichal Simek
The commit 4cc24aeaf420 ("serial: Add missing Kconfig dependencies for debug consoles") has added incorrect dependency for SIFIVE debug uart which should depend on SIFIVE driver instead of PL01x. Fixes: 4cc24aeaf420 ("serial: Add missing Kconfig dependencies for debug consoles") Signed-off-by: Michal Simek <michal.simek@xilinx.com> Reviewed-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bin.meng@windriver.com> Reviewed-by: Leo Liang <ycliang@andestech.com> Reviewed-by: Sean Anderson <seanga2@gmail.com>
2020-07-24sysreset: syscon: Support value propertyBin Meng
Per the DT binding, <mask> and <value> property can have either one or both, and if <value> is missing, <mask> should be used, which is what current U-Boot sysreset_syscon driver supports. This adds support to the <value> property to the driver, and <mask> semantics is updated to really be a mask to the value if both exist. Signed-off-by: Bin Meng <bin.meng@windriver.com> Reviewed-by: Simon Glass <sjg@chromium.org> Reviewed-by: Pragnesh Patel <pragnesh.patel@sifive.com>
2020-07-24sysreset: syscon: Don't assume default value for offset and mask propertyBin Meng
Per the DT binding, <offset> is a required property. Let's abort the probe if it is missing. For the <mask> property, current codes assume a default value of zero, which is not correct either. Signed-off-by: Bin Meng <bin.meng@windriver.com> Reviewed-by: Simon Glass <sjg@chromium.org> Reviewed-by: Pragnesh Patel <pragnesh.patel@sifive.com>
2020-07-23Merge tag 'dm-pull-20jul20' of git://git.denx.de/u-boot-dmTom Rini
binman support for FIT new UCLASS_SOC patman switch 'test' command minor fdt fixes patman usability improvements
2020-07-22Merge tag 'u-boot-rockchip-20200722' of ↵Tom Rini
https://gitlab.denx.de/u-boot/custodians/u-boot-rockchip - New rk3326 board: Hardkernel Odroid Go2; - Update board config and dts for RockPI 4/N8/N10; - Update led boot on support for roc-rk3399-pc; - Enable SPI Flash suppor for rk3328 rock64 board; - Update rockchip pcie phy to use generic framework;
2020-07-22pci: rockchip: Drop legacy PHY driverJagan Teki
Drop the legacy PHY driver and it's associated code since the PHY handling driver now part of Generic PHY framework. Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2020-07-22pci: rockchip: Switch to generic-phyJagan Teki
Now, we have a PCIe PHY driver as part of the Generic PHY framework. Let's use it instead of legacy PHY driver. Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2020-07-22phy: Add Rockchip PCIe PHY driverJagan Teki
Add the Rockchip PCIe PHY driver as part of Generic PHY framework. Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2020-07-22rockchip: ram: fix debug funcfion define when RAM_ROCKCHIP_DEBUG not setKever Yang
The empty function define should not be in the header file, or else the build will error with function multi definition after CONFIG_RAM_ROCKCHIP_DEBUG is disabled. Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
2020-07-22ram: rk3399: Mark existing prints via RAM_ROCKCHIP_DEBUGJagan Teki
Right now all these debug statements are printing on the console to make sure proper dram initialization happens.   Mark them into RAM_ROCKCHIP_DEBUG would be more meaningful and work like before since the RAM_ROCKCHIP_DEBUG is by default yet. No functionality changes. Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2020-07-22ram: rk3399: Drop debug stride in driverJagan Teki
stride debug is already present in sdram_common.c via RAM_ROCKCHIP_DEBUG. So, drop the redundant debug stride code in rk3399 driver. Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2020-07-22drivers: spi: rk_spi: Add support for RK3328Johannes Krottmayer
Add support for the RK3328 SPI controller Signed-off-by: Johannes Krottmayer <krjdev@gmail.com> Cc: Kever Yang <kever.yang@rock-chips.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2020-07-22drivers: clk: rockchip: clk_rk3328: Add SPI supportJohannes Krottmayer
Add SPI support for the RK3328 clock driver Signed-off-by: Johannes Krottmayer <krjdev@gmail.com> Cc: Kever Yang <kever.yang@rock-chips.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2020-07-20treewide: convert devfdt_get_addr() to dev_read_addr()Masahiro Yamada
When you enable CONFIG_OF_LIVE, you will end up with a lot of conversions. To generate this commit, I used coccinelle excluding drivers/core/, include/dm/, and test/ The semantic patch that makes this change is as follows: <smpl> @@ expression dev; @@ -devfdt_get_addr(dev) +dev_read_addr(dev) </smpl> Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2020-07-20treewide: remove (phys_addr_t) casts from devfdt_get_addr()Masahiro Yamada
This cast is unneeded. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2020-07-20treewide: convert (void *)devfdt_get_addr() to dev_read_addr_ptr()Masahiro Yamada
Use the _ptr suffixed variant instead of casting. Also, convert it to dev_read_addr_ptr(), which is safe to CONFIG_OF_LIVE. One curious part is an error check like follows in drivers/watchdog/omap_wdt.c: priv->regs = (struct wd_timer *)devfdt_get_addr(dev); if (!priv->regs) return -EINVAL; devfdt_get_addr() returns FDT_ADDR_T_NONE (i.e. -1) on error. So, this code does not catch any error in DT parsing. dev_read_addr_ptr() returns NULL on error, so this error check will work. I generated this commit by the following command: $ find . -name .git -prune -o -name '*.[ch]' -type f -print | \ xargs sed -i -e 's/([^*)]*\*)devfdt_get_addr(/dev_read_addr_ptr(/' I manually fixed drivers/usb/host/ehci-mx6.c Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2020-07-20dm: soc: Introduce soc_ti_k3 driver for TI K3 SoCsDave Gerlach
Introduce an soc_ti_k3_driver that allows identification and selection of SoC specific data based on the JTAG ID register for device identification, as described for AM65x[0] and J721E[1] devices. [0] http://www.ti.com/lit/ug/spruid7e/spruid7e.pdf [1] http://www.ti.com/lit/ug/spruil1a/spruil1a.pdf Signed-off-by: Dave Gerlach <d-gerlach@ti.com>
2020-07-20test: Add tests for SOC uclassDave Gerlach
Add a sandbox SOC driver, and some tests for the SOC uclass. Reviewed-by: Simon Glass <sjg@chromium.org> Signed-off-by: Dave Gerlach <d-gerlach@ti.com>
generated by cgit (git 2.34.1) at 2025-01-23 23:29:55 +0000